1
|
Tang Z, Lin X, Yu M, Yang J, Li S, Mondal AK, Wu H. A review of cellulose-based catechol-containing functional materials for advanced applications. Int J Biol Macromol 2024; 266:131243. [PMID: 38554917 DOI: 10.1016/j.ijbiomac.2024.131243] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/26/2023] [Revised: 03/15/2024] [Accepted: 03/27/2024] [Indexed: 04/02/2024]
Abstract
With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.
Collapse
Affiliation(s)
- Zuwu Tang
- School of Materials and Packaging Engineering, Fujian Polytechnic Normal University, Fuzhou, Fujian 350300, PR China
| | - Xinxing Lin
- School of Materials and Packaging Engineering, Fujian Polytechnic Normal University, Fuzhou, Fujian 350300, PR China
| | - Meiqiong Yu
- School of Materials and Packaging Engineering, Fujian Polytechnic Normal University, Fuzhou, Fujian 350300, PR China; College of Material Engineering, Fujian Agriculture and Forestry University, Fuzhou, Fujian 350108, PR China; National Forestry and Grassland Administration Key Laboratory of Plant Fiber Functional Materials, Fuzhou, Fujian 350108, PR China
| | - Jinbei Yang
- School of Materials and Packaging Engineering, Fujian Polytechnic Normal University, Fuzhou, Fujian 350300, PR China
| | - Shiqian Li
- School of Materials and Packaging Engineering, Fujian Polytechnic Normal University, Fuzhou, Fujian 350300, PR China
| | - Ajoy Kanti Mondal
- Institute of National Analytical Research and Service, Bangladesh Council of Scientific and Industrial Research, Dhanmondi, Dhaka 1205, Bangladesh.
| | - Hui Wu
- College of Material Engineering, Fujian Agriculture and Forestry University, Fuzhou, Fujian 350108, PR China; National Forestry and Grassland Administration Key Laboratory of Plant Fiber Functional Materials, Fuzhou, Fujian 350108, PR China.
| |
Collapse
|
2
|
Bansal R, Barshilia HC, Pandey KK. Nanotechnology in wood science: Innovations and applications. Int J Biol Macromol 2024; 262:130025. [PMID: 38340917 DOI: 10.1016/j.ijbiomac.2024.130025] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2023] [Revised: 02/04/2024] [Accepted: 02/05/2024] [Indexed: 02/12/2024]
Abstract
Application of nanomaterials is gaining tremendous interest in the field of wood science and technology for value addition and enhancing performance of wood and wood-based composites. This review focuses on the use of nanomaterials in improving the properties of wood and wood-based materials and protecting them from weathering, biodegradation, and other deteriorating agents. UV-resistant, self-cleaning (superhydrophobic) surfaces with anti-microbial properties have been developed using the extraordinary features of nanomaterials. Scratch-resistant nano-coatings also improve durability and aesthetic appeal of wood. Moreover, nanomaterials have been used as wood preservatives for increasing the resistance against wood deteriorating agents such as fungi, termites and borers. Wood can be made more resistant to ignition and slower to burn by introducing nano-clays or nanoparticles of metal-oxides. The use of nanocellulose and lignin nanoparticles in wood-based products has attracted huge interest in developing novel materials with improved properties. Nanocellulose and lignin nanoparticles derived/synthesized from woody biomass can enhance the mechanical properties such as strength and stiffness and impart additional functionalities to wood-based products. Cellulose nano-fibres/crystals find application in wide areas of materials science like reinforcement for composites. Incorporation of nanomaterials in resin has been used to enhance specific properties of wood-based composites. This review paper highlights some of the advancements in the use of nanotechnology in wood science, and its potential impact on the industry.
Collapse
Affiliation(s)
- Richa Bansal
- Institute of Wood Science and Technology, 18th Cross Malleswaram, Bengaluru 560003, India
| | - Harish C Barshilia
- CSIR-National Aerospace Laboratories, HAL Airport Road, Bangalore 560017, India
| | - Krishna K Pandey
- Institute of Wood Science and Technology, 18th Cross Malleswaram, Bengaluru 560003, India.
| |
Collapse
|
3
|
Nocca G, Arcovito A, Elkasabgy NA, Basha M, Giacon N, Mazzinelli E, Abdel-Maksoud MS, Kamel R. Cellulosic Textiles-An Appealing Trend for Different Pharmaceutical Applications. Pharmaceutics 2023; 15:2738. [PMID: 38140079 PMCID: PMC10747844 DOI: 10.3390/pharmaceutics15122738] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 11/28/2023] [Accepted: 12/04/2023] [Indexed: 12/24/2023] Open
Abstract
Cellulose, the most abundant biopolymer in nature, is derived from various sources. The production of pharmaceutical textiles based on cellulose represents a growing sector. In medicated textiles, textile and pharmaceutical sciences are integrated to develop new healthcare approaches aiming to improve patient compliance. Through the possibility of cellulose functionalization, pharmaceutical textiles can broaden the applications of cellulose in the biomedical field. This narrative review aims to illustrate both the methods of extraction and preparation of cellulose fibers, with a particular focus on nanocellulose, and diverse pharmaceutical applications like tissue restoration and antimicrobial, antiviral, and wound healing applications. Additionally, the merging between fabricated cellulosic textiles with drugs, metal nanoparticles, and plant-derived and synthetic materials are also illustrated. Moreover, new emerging technologies and the use of smart medicated textiles (3D and 4D cellulosic textiles) are not far from those within the review scope. In each section, the review outlines some of the limitations in the use of cellulose textiles, indicating scientific research that provides significant contributions to overcome them. This review also points out the faced challenges and possible solutions in a trial to present an overview on all issues related to the use of cellulose for the production of pharmaceutical textiles.
Collapse
Affiliation(s)
- Giuseppina Nocca
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
- Fondazione Policlinico Universitario “A. Gemelli”, IRCCS, Largo Agostino Gemelli 8, 00168 Rome, Italy
| | - Alessandro Arcovito
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
- Fondazione Policlinico Universitario “A. Gemelli”, IRCCS, Largo Agostino Gemelli 8, 00168 Rome, Italy
| | - Nermeen A. Elkasabgy
- Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Cairo University, Kasr El-Aini Street, Cairo 11562, Egypt
| | - Mona Basha
- Pharmaceutical Technology Department, National Research Centre, Cairo 12622, Egypt (R.K.)
| | - Noah Giacon
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
| | - Elena Mazzinelli
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
| | | | - Rabab Kamel
- Pharmaceutical Technology Department, National Research Centre, Cairo 12622, Egypt (R.K.)
| |
Collapse
|
4
|
Sathasivam T, Kang Brian L, Andersen IM, Ru Tan H, Zhang Z, Wu T, Hong Lau H, Zhu Q, Kai D. Green Nanocellulose/PEI-Grafted Magnetic Nanoparticles for Effective Removal of Heavy Metal Ions. Chem Asian J 2023:e202300842. [PMID: 37903723 DOI: 10.1002/asia.202300842] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/25/2023] [Revised: 10/27/2023] [Accepted: 10/27/2023] [Indexed: 11/01/2023]
Abstract
In response to the pressing issue of water pollution caused by heavy metal ions, there is a growing demand for green adsorbents that can effectively remove these contaminants while being easy to separate and regenerate. A novel magnetic composite was synthesized by bonding amino-functionalized Fe3 O4 -SiO2 magnetic particles (MNP-NH2 ) to polyethyleneimine (PEI)-grafted cellulose nanofibers (CNF). The modification of CNF with PEI through a peptidic coupling reaction resulted in the uniform dispersion and strong attachment of MNP-NH2 particles (286.7 nm) onto the PEI-CNF surface. This composite exhibited exceptional adsorption capabilities for heavy metals, achieving 16.73 mg/g for Pb, 16.12 mg/g for Cu, and 12.53 mg/g for Co. These remarkable adsorption capacities are attributed to the complex interactions between the metal ions and the amino, carboxyl, and hydroxyl groups on the surface of PEI-CNF-MNP. The introduction of PEI significantly enhanced the adsorption capacities, and the adsorption sequence (Pb(II)>Cu(II)>Co(II)) can be explained by differences in ionic radius and surface complexation strength. Langmuir isotherm and pseudo-second-order kinetic models described the adsorption process, while Na2 EDTA was proved effective for desorption with high recovery rates. This magnetic composite holds promise for treating heavy metal-contaminated wastewater due to its impressive performance.
Collapse
Affiliation(s)
- Thenapakiam Sathasivam
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
- Institute of Materials Research and Engineering (IMRE), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
| | - Lim Kang Brian
- School of Materials Science and Engineering (MSE), Nanyang Technological University (NTU), 50 Nanyang Avenue, 639798, Singapore, Singapore
| | - Ingrid Marie Andersen
- School of Materials Science and Engineering (MSE), Nanyang Technological University (NTU), 50 Nanyang Avenue, 639798, Singapore, Singapore
| | - Hui Ru Tan
- Institute of Materials Research and Engineering (IMRE), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
| | - Zheng Zhang
- Institute of Materials Research and Engineering (IMRE), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
| | - Tingting Wu
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
| | - Hooi Hong Lau
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
| | - Qiang Zhu
- Institute of Materials Research and Engineering (IMRE), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
- School of Chemistry, Chemical Engineering and Biotechnology, Nanyang Technological University, 21 Nanyang Link, 637371, Singapore, Singapore
| | - Dan Kai
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
- Institute of Materials Research and Engineering (IMRE), A*STAR, 2 Fusionopolis Way, Innovis, #08-03, 138634, Singapore, Singapore
- School of Chemistry, Chemical Engineering and Biotechnology, Nanyang Technological University, 21 Nanyang Link, 637371, Singapore, Singapore
| |
Collapse
|
5
|
He Y, Li Q, Chen P, Duan Q, Zhan J, Cai X, Wang L, Hou H, Qiu X. A smart adhesive Janus hydrogel for non-invasive cardiac repair and tissue adhesion prevention. Nat Commun 2022; 13:7666. [PMID: 36509756 PMCID: PMC9744843 DOI: 10.1038/s41467-022-35437-5] [Citation(s) in RCA: 48] [Impact Index Per Article: 24.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Accepted: 12/02/2022] [Indexed: 12/14/2022] Open
Abstract
Multifunctional hydrogel with asymmetric and reversible adhesion characteristics is essential to handle the obstructions towards bioapplications of trauma removal and postoperative tissue synechia. Herein, we developed a responsively reversible and asymmetrically adhesive Janus hydrogel that enables on-demand stimuli-triggered detachment for efficient myocardial infarction (MI) repair, and synchronously prevents tissue synechia and inflammatory intrusion after surgery. In contrast with most irreversibly and hard-to-removable adhesives, this Janus hydrogel exhibited a reversible adhesion capability and can be noninvasively detached on-demand just by slight biologics. It is interesting that the adhesion behaves exhibited a molecularly encoded adhesion-adaptive stiffening feature similar to the self-protective stress-strain effect of biological tissues. In vitro and in vivo experiments demonstrated that Janus hydrogel can promote the maturation and functions of cardiomyocytes, and facilitate MI repair by reducing oxidative damage and inflammatory response, reconstructing electrical conduction and blood supply in infarcted area. Furthermore, no secondary injury and tissue synechia were triggered after transplantation of Janus hydrogel. This smart Janus hydrogel reported herein offers a potential strategy for clinically transformable cardiac patch and anti-postoperative tissue synechia barrier.
Collapse
Affiliation(s)
- Yutong He
- grid.284723.80000 0000 8877 7471The Fifth Affiliated Hospital, Southern Medical University, Guangzhou, Guangdong 510900 People’s Republic of China ,grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Qian Li
- grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China ,grid.284723.80000 0000 8877 7471School of Basic Medical Science, Southern Medical University, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Pinger Chen
- grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China ,grid.284723.80000 0000 8877 7471School of Basic Medical Science, Southern Medical University, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Qixiang Duan
- grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China ,grid.284723.80000 0000 8877 7471School of Basic Medical Science, Southern Medical University, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Jiamian Zhan
- grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China ,grid.284723.80000 0000 8877 7471School of Basic Medical Science, Southern Medical University, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Xiaohui Cai
- grid.284723.80000 0000 8877 7471School of Pharmaceutical Science, Southern Medical University, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Leyu Wang
- grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China ,grid.284723.80000 0000 8877 7471Biomaterials Research Center, School of Biomedical Engineering, Southern Medical University, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Honghao Hou
- grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China ,grid.284723.80000 0000 8877 7471School of Basic Medical Science, Southern Medical University, Guangzhou, Guangdong 510515 People’s Republic of China
| | - Xiaozhong Qiu
- grid.284723.80000 0000 8877 7471The Fifth Affiliated Hospital, Southern Medical University, Guangzhou, Guangdong 510900 People’s Republic of China ,grid.484195.5Guangdong Provincial Key Laboratory of Construction and Detection in Tissue Engineering, Guangzhou, Guangdong 510515 People’s Republic of China
| |
Collapse
|
6
|
Reda MA, Chidiac SE. Performance of Capsules in Self-Healing Cementitious Material. MATERIALS (BASEL, SWITZERLAND) 2022; 15:ma15207302. [PMID: 36295367 PMCID: PMC9611815 DOI: 10.3390/ma15207302] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/16/2022] [Revised: 10/03/2022] [Accepted: 10/15/2022] [Indexed: 06/12/2023]
Abstract
Encapsulation is a very promising technique that is being explored to enhance the autonomous self-healing of cementitious materials. However, its success requires the survival of self-healing capsules during mixing and placing conditions, while still trigger the release of a healing agent upon concrete cracking. A review of the literature revealed discontinuities and inconsistencies in the design and performance evaluation of self-healing cementitious material. A finite element model was developed to study the compatibility requirements for the capsule and the cementing material properties while the cement undergoes volume change due to hydration and/or drying. The FE results have provided insights into the observed inconsistencies and the importance of having capsules' mechanical and geometrical properties compatible with the cementitious matrix.
Collapse
|
7
|
Dorieh A, Ayrilmis N, Farajollah Pour M, Ghafari Movahed S, Valizadeh Kiamahalleh M, Shahavi MH, Hatefnia H, Mehdinia M. Phenol formaldehyde resin modified by cellulose and lignin nanomaterials: Review and recent progress. Int J Biol Macromol 2022; 222:1888-1907. [DOI: 10.1016/j.ijbiomac.2022.09.279] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2022] [Revised: 09/06/2022] [Accepted: 09/28/2022] [Indexed: 11/05/2022]
|
8
|
Liu J, Li Y, Mo H, Xie E, Fang J, Gan W. Current utilization of waste biomass as filler for wood adhesives: A review. J IND ENG CHEM 2022. [DOI: 10.1016/j.jiec.2022.08.016] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
|
9
|
Nanocellulose in Heterogeneous Water-Based Polymerization for Wood Adhesives. POLYSACCHARIDES 2022. [DOI: 10.3390/polysaccharides3010012] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
Abstract
The interest in the development of biobased adhesives has increased due to environmental concerns. Moreover, as the production of engineered wood products (EWPs) is expected to grow, the wood adhesives market needs to transit toward formaldehyde-free products. Cellulose nanoparticles (CNPs) are a material with unique properties and advantages for producing hybrid materials as biobased wood adhesives. Besides their traditional use as reinforcing additives, CNPs can be incorporated at the beginning of the polymerization reaction to form in situ polymerized hybrid adhesives with better mechanical and physicochemical properties than the neat adhesive. Despite their outstanding characteristics, CNPs are still an emerging nanomaterial in the wood adhesive field, and the studies are incipient. This review explores the utilization of CNPs in heterogeneous polymerization for the production of polyvinyl acetate, polymeric isocyanates, waterborne polyurethane systems, and other waterborne polymer latexes. The main challenges are discussed, and some recommendations are set down for the manufacture of these novel hybrid nanocomposites.
Collapse
|
10
|
|
11
|
Wibowo ES, Park BD, Causin V. Recent advances in urea–formaldehyde resins: converting crystalline thermosetting polymers back to amorphous ones. POLYM REV 2021. [DOI: 10.1080/15583724.2021.2014520] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
Affiliation(s)
- Eko Setio Wibowo
- Department of Wood and Paper Science, Kyungpook National University, Daegu, Republic of Korea
| | - Byung-Dae Park
- Department of Wood and Paper Science, Kyungpook National University, Daegu, Republic of Korea
| | - Valerio Causin
- Departimento di Scienze Chimiche, Università di Padova, Padova, Italy
| |
Collapse
|
12
|
Samyn P. Polydopamine and Cellulose: Two Biomaterials with Excellent Compatibility and Applicability. POLYM REV 2021. [DOI: 10.1080/15583724.2021.1896545] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Affiliation(s)
- Pieter Samyn
- Institute for Materials Research, Applied and Analytical Chemistry, Hasselt University, Diepenbeek, Belgium
| |
Collapse
|
13
|
Kawalerczyk J, Dziurka D, Mirski R, Siuda J. The reduction of adhesive application in plywood manufacturing by using nanocellulose‐reinforced urea‐formaldehyde resin. J Appl Polym Sci 2020. [DOI: 10.1002/app.49834] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Affiliation(s)
- Jakub Kawalerczyk
- Department of Wood‐Based Materials Poznań University of Life Sciences Poznań Poland
| | - Dorota Dziurka
- Department of Wood‐Based Materials Poznań University of Life Sciences Poznań Poland
| | - Radosław Mirski
- Department of Wood‐Based Materials Poznań University of Life Sciences Poznań Poland
| | - Joanna Siuda
- Department of Wood‐Based Materials Poznań University of Life Sciences Poznań Poland
| |
Collapse
|
14
|
Impact of Bio-Based (Tannins) and Nano-Scale (CNC) Additives on Bonding Properties of Synthetic Adhesives (PVAc and MUF) Using Chestnut Wood from Young Coppice Stands. NANOMATERIALS 2020; 10:nano10050956. [PMID: 32443438 PMCID: PMC7281407 DOI: 10.3390/nano10050956] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/01/2020] [Revised: 05/13/2020] [Accepted: 05/14/2020] [Indexed: 11/21/2022]
Abstract
Sustainability and ecotoxicity issues call for innovations regarding eco-friendly adhesives in the production of biocomposite wood materials, and solutions involving nano-scale and bio-based compounds represent a valid and promising target. One possible approach is to increase the performance of adhesives such as polyvinyl acetate (PVAc) or melamine-urea-formaldehyde (MUF) by means of nanoparticles in order to obtain a material with better mechanical and environmental resistance. When applying cellulose-based nanoparticles or tannin, the concept of a circular economy is successfully implemented into the forest/wood value chain, and chances are created to develop new value chains using byproducts of forestry operations. In this study, assortments coming from young sweet chestnut (Castanea sativa Mill.) coppice stands were utilized for the preparation of single lap joint assemblies using different commercial adhesives (PVAc, MUF) and cellulose nanocrystals (CNC) and tannin as additives. The results showed that addition of CNC and tannin to PVAc glue increased tensile shear strength in lap joint tests presenting a promising base for future tests regarding the addition of CNC and tannin in MUF or PVAc adhesive formulations. Unfortunately, the tested bio-based additives did not reveal the same encouraging results when tested in the wet state.
Collapse
|
15
|
Trache D, Tarchoun AF, Derradji M, Hamidon TS, Masruchin N, Brosse N, Hussin MH. Nanocellulose: From Fundamentals to Advanced Applications. Front Chem 2020; 8:392. [PMID: 32435633 PMCID: PMC7218176 DOI: 10.3389/fchem.2020.00392] [Citation(s) in RCA: 273] [Impact Index Per Article: 68.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2020] [Accepted: 04/15/2020] [Indexed: 12/14/2022] Open
Abstract
Over the past few years, nanocellulose (NC), cellulose in the form of nanostructures, has been proved to be one of the most prominent green materials of modern times. NC materials have gained growing interests owing to their attractive and excellent characteristics such as abundance, high aspect ratio, better mechanical properties, renewability, and biocompatibility. The abundant hydroxyl functional groups allow a wide range of functionalizations via chemical reactions, leading to developing various materials with tunable features. In this review, recent advances in the preparation, modification, and emerging application of nanocellulose, especially cellulose nanocrystals (CNCs), are described and discussed based on the analysis of the latest investigations (particularly for the reports of the past 3 years). We start with a concise background of cellulose, its structural organization as well as the nomenclature of cellulose nanomaterials for beginners in this field. Then, different experimental procedures for the production of nanocelluloses, their properties, and functionalization approaches were elaborated. Furthermore, a number of recent and emerging uses of nanocellulose in nanocomposites, Pickering emulsifiers, wood adhesives, wastewater treatment, as well as in new evolving biomedical applications are presented. Finally, the challenges and opportunities of NC-based emerging materials are discussed.
Collapse
Affiliation(s)
- Djalal Trache
- UER Procédés Energétiques, Ecole Militaire Polytechnique, Bordj El-Bahri, Algeria
| | - Ahmed Fouzi Tarchoun
- UER Procédés Energétiques, Ecole Militaire Polytechnique, Bordj El-Bahri, Algeria
| | - Mehdi Derradji
- UER Procédés Energétiques, Ecole Militaire Polytechnique, Bordj El-Bahri, Algeria
| | - Tuan Sherwyn Hamidon
- Materials Technology Research Group, School of Chemical Sciences, Universiti Sains Malaysia, Penang, Malaysia
| | - Nanang Masruchin
- Research Center for Biomaterials, Indonesian Institute of Sciences (LIPI), Jakarta, Indonesia
| | - Nicolas Brosse
- Laboratoire d'Etude et de Recherche sur le MAtériau Bois (LERMAB), Faculté des Sciences et Techniques, Université de Lorraine, Vandœuvre-lès-Nancy, France
| | - M. Hazwan Hussin
- Materials Technology Research Group, School of Chemical Sciences, Universiti Sains Malaysia, Penang, Malaysia
| |
Collapse
|
16
|
A separable paper adhesive based on the starch―lignin composite. Carbohydr Polym 2020; 229:115488. [DOI: 10.1016/j.carbpol.2019.115488] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2019] [Revised: 10/10/2019] [Accepted: 10/16/2019] [Indexed: 11/23/2022]
|
17
|
Chen Q, Shi Y, Chen G, Cai M. Enhanced mechanical and hydrophobic properties of composite cassava starch films with stearic acid modified MCC (microcrystalline cellulose)/NCC (nanocellulose) as strength agent. Int J Biol Macromol 2020; 142:846-854. [DOI: 10.1016/j.ijbiomac.2019.10.024] [Citation(s) in RCA: 42] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/13/2019] [Revised: 09/29/2019] [Accepted: 10/02/2019] [Indexed: 10/25/2022]
|
18
|
Deshpande TD, Singh YRG, Patil S, Joshi YM, Sharma A. Adhesion strength and viscoelastic properties of polydimethylsiloxane (PDMS) based elastomeric nanocomposites with embedded electrospun nanofibers. SOFT MATTER 2019; 15:5739-5747. [PMID: 31268461 DOI: 10.1039/c9sm00533a] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
In the present study, the adhesive and viscoelastic properties of polydimethylsiloxane (PDMS) based nanocomposite pressure sensitive adhesives (PSAs) with embedded electrospun polyacrylonitrile (PAN) and polyvinyl alcohol (PVA) nanofibers as fillers were investigated. PDMS nanocomposite adhesive films using PAN and PVA nanofibers were synthesized by dispersing fillers in the matrix by a solvent mixing process. The adhesion strength and reusability of the prepared nanocomposite PSA films were measured using peel tests as the fraction of nanofibers in the polymer matrix is increased. The variations of the adhesive properties of the PSAs as function of the type and loading of filler were related to their rheological properties in terms of shear and elastic moduli. Although 3-fold enhancement of the adhesion strength was achieved with 0.5 wt% loading for both types (PAN and PVA) of nanocomposites as compared to elastic PDMS, the composite adhesive with PAN nanofibers can provide a superior balance of rheological properties, resulting in improved reusability over other PSAs. The differences in the adhesion and viscoelastic properties of the composite PSAs are attributed to the polymer chemistry, processability, and architecture of the electrospun nanofibers in the soft PDMS matrix.
Collapse
Affiliation(s)
- Tushar D Deshpande
- Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur-208016, UP, India.
| | - Yogesh R G Singh
- Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur-208016, UP, India.
| | - Sandip Patil
- Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur-208016, UP, India. and E-Spin Nanotech Pvt Ltd SIIC, SIDBI Incubation Centre Indian Institute of Technology Kanpur, Kanpur-208016, UP, India
| | - Yogesh M Joshi
- Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur-208016, UP, India.
| | - Ashutosh Sharma
- Department of Chemical Engineering, Indian Institute of Technology Kanpur, Kanpur-208016, UP, India.
| |
Collapse
|
19
|
Vineeth SK, Gadhave RV, Gadekar PT. Nanocellulose Applications in Wood Adhesives—Review. ACTA ACUST UNITED AC 2019. [DOI: 10.4236/ojpchem.2019.94006] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
20
|
Winter A, Mundigler N, Holzweber J, Veigel S, Müller U, Kovalcik A, Gindl-Altmutter W. Residual wood polymers facilitate compounding of microfibrillated cellulose with poly(lactic acid) for 3D printer filaments. PHILOSOPHICAL TRANSACTIONS. SERIES A, MATHEMATICAL, PHYSICAL, AND ENGINEERING SCIENCES 2018; 376:20170046. [PMID: 29277743 PMCID: PMC5746559 DOI: 10.1098/rsta.2017.0046] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Accepted: 09/08/2017] [Indexed: 05/25/2023]
Abstract
Microfibrillated cellulose (MFC) is a fascinating material with an obvious potential for composite reinforcement due to its excellent mechanics together with high specific surface area. However, in order to use this potential, commercially viable solutions to important technological challenges have to be found. Notably, the distinct hydrophilicity of MFC prevents efficient drying without loss in specific surface area, necessitating storage and processing in wet condition. This greatly hinders compounding with important technical polymers immiscible with water. Differently from cellulose, the chemistry of the major wood polymers lignin and hemicellulose is much more diverse in terms of functional groups. Specifically, the aromatic moieties present in lignin and acetyl groups in hemicellulose provide distinctly less polar surface-chemical functionality compared to hydroxyl groups which dominate the surface-chemical character of cellulose. It is shown that considerable advantages in the production of MFC-filled poly(lactic acid) filaments for three-dimensional printing can be obtained through the use of MFC containing residual lignin and hemicellulose due to their advantageous surface-chemical characteristics. Specifically, considerably reduced agglomerations of MFC in the filaments in combination with improved printability and improved toughness of printed objects are achieved.This article is part of a discussion meeting issue 'New horizons for cellulose nanotechnology'.
Collapse
Affiliation(s)
- Armin Winter
- Department of Materials Science and Process Engineering, BOKU-University of Natural Resources and Life Science Vienna, Konrad Lorenz Strasse 24, 3430 Tulln, Austria
| | - Norbert Mundigler
- Department of Agrobiotechnology, BOKU-University of Natural Resources and Life Science Vienna, Konrad Lorenz Strasse 20, 3430 Tulln, Austria
| | - Julian Holzweber
- Department of Agrobiotechnology, BOKU-University of Natural Resources and Life Science Vienna, Konrad Lorenz Strasse 20, 3430 Tulln, Austria
| | - Stefan Veigel
- Department of Materials Science and Process Engineering, BOKU-University of Natural Resources and Life Science Vienna, Konrad Lorenz Strasse 24, 3430 Tulln, Austria
| | - Ulrich Müller
- Department of Materials Science and Process Engineering, BOKU-University of Natural Resources and Life Science Vienna, Konrad Lorenz Strasse 24, 3430 Tulln, Austria
| | - Adriana Kovalcik
- Competence Centre for Wood Composites and Wood Chemistry (Wood K Plus), Kompetenzzentrum Holz GmbH, Altenbergerstrasse 69, 4040 Linz, Austria
| | - Wolfgang Gindl-Altmutter
- Department of Materials Science and Process Engineering, BOKU-University of Natural Resources and Life Science Vienna, Konrad Lorenz Strasse 24, 3430 Tulln, Austria
| |
Collapse
|
21
|
Kargarzadeh H, Mariano M, Huang J, Lin N, Ahmad I, Dufresne A, Thomas S. Recent developments on nanocellulose reinforced polymer nanocomposites: A review. POLYMER 2017. [DOI: 10.1016/j.polymer.2017.09.043] [Citation(s) in RCA: 251] [Impact Index Per Article: 35.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
|
22
|
Pinkas O, Haneman O, Chemke O, Zilberman M. Fiber-reinforced composite hydrogels for bioadhesive and sealant applications. POLYM ADVAN TECHNOL 2017. [DOI: 10.1002/pat.4009] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Affiliation(s)
- Oded Pinkas
- Department of Biomedical Engineering, Faculty of Engineering; Tel Aviv University; Tel Aviv 69978 Israel
- Department of Materials Science and Engineering, Faculty of Engineering; Tel Aviv University; Tel Aviv 69978 Israel
| | - Or Haneman
- Department of Biomedical Engineering, Faculty of Engineering; Tel Aviv University; Tel Aviv 69978 Israel
| | - Omer Chemke
- Department of Biomedical Engineering, Faculty of Engineering; Tel Aviv University; Tel Aviv 69978 Israel
| | - Meital Zilberman
- Department of Biomedical Engineering, Faculty of Engineering; Tel Aviv University; Tel Aviv 69978 Israel
- Department of Materials Science and Engineering, Faculty of Engineering; Tel Aviv University; Tel Aviv 69978 Israel
| |
Collapse
|
23
|
Bio-Based Adhesives and Evaluation for Wood Composites Application. Polymers (Basel) 2017; 9:polym9020070. [PMID: 30970748 PMCID: PMC6432405 DOI: 10.3390/polym9020070] [Citation(s) in RCA: 58] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/31/2016] [Revised: 02/07/2017] [Accepted: 02/10/2017] [Indexed: 11/18/2022] Open
Abstract
There has been a rapid growth in research and innovation of bio-based adhesives in the engineered wood product industry. This article reviews the recent research published over the last few decades on the synthesis of bio-adhesives derived from such renewable resources as lignin, starch, and plant proteins. The chemical structure of these biopolymers is described and discussed to highlight the active functional groups that are used in the synthesis of bio-adhesives. The potentials and drawbacks of each biomass are then discussed in detail; some methods have been suggested to modify their chemical structures and to improve their properties including water resistance and bonding strength for their ultimate application as wood adhesives. Moreover, this article includes discussion of techniques commonly used for evaluating the petroleum-based wood adhesives in terms of mechanical properties and penetration behavior, which are expected to be more widely applied to bio-based wood adhesives to better evaluate their prospect for wood composites application.
Collapse
|
24
|
Zhao Y, Zhang Y, Lindström ME, Li J. Tunicate cellulose nanocrystals: Preparation, neat films and nanocomposite films with glucomannans. Carbohydr Polym 2015; 117:286-296. [DOI: 10.1016/j.carbpol.2014.09.020] [Citation(s) in RCA: 86] [Impact Index Per Article: 9.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2014] [Revised: 05/04/2014] [Accepted: 09/12/2014] [Indexed: 11/25/2022]
|
25
|
He X, Xiao Q, Lu C, Wang Y, Zhang X, Zhao J, Zhang W, Zhang X, Deng Y. Uniaxially aligned electrospun all-cellulose nanocomposite nanofibers reinforced with cellulose nanocrystals: scaffold for tissue engineering. Biomacromolecules 2014; 15:618-27. [PMID: 24405043 DOI: 10.1021/bm401656a] [Citation(s) in RCA: 161] [Impact Index Per Article: 16.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Uniaxially aligned cellulose nanofibers with well oriented cellulose nanocrystals (CNCs) embedded were fabricated via electrospinning using a rotating drum as the collector. Scanning electron microscope (SEM) images indicated that most cellulose nanofibers were uniaxially aligned. The incorporation of CNCs into the spinning dope resulted in more uniform morphology of the electrospun cellulose/CNCs nanocomposite nanofibers (ECCNN). Polarized light microscope (PLM) and transmission electron microscope (TEM) showed that CNCs dispersed well in ECCNN nonwovens and achieved considerable orientation along the long axis direction. This unique hierarchical microstructure of ECCNN nonwovens gave rise to remarkable enhancement of their physical properties. By incorporating 20% loading (in weight) of CNCs, the tensile strength and elastic modulus of ECCNN along the fiber alignment direction were increased by 101.7 and 171.6%, respectively. Their thermal stability was significantly improved as well. In addition, the ECCNN nonwovens were assessed as potential scaffold materials for tissue engineering. It was elucidated from MTT tests that the ECCNN were essentially nontoxic to human cells. Cell culture experiments demonstrated that cells could proliferate rapidly not only on the surface but also deep inside the ECCNN. More importantly, the aligned nanofibers of ECCNN exhibited a strong effect on directing cellular organization. This feature made the scaffold particularly useful for various artificial tissues or organs, such as blood vessel, tendon, nerve, and so on, in which cell orientation was crucial for their performance.
Collapse
Affiliation(s)
- Xu He
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute at Sichuan University , Chengdu 610065, China
| | | | | | | | | | | | | | | | | |
Collapse
|
26
|
Wang T, Drzal LT. Cellulose-nanofiber-reinforced poly(lactic acid) composites prepared by a water-based approach. ACS APPLIED MATERIALS & INTERFACES 2012; 4:5079-5085. [PMID: 22991937 DOI: 10.1021/am301438g] [Citation(s) in RCA: 47] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
The difficulty of dispersing cellulose nanofibers (CNFs) in hydrophobic polymers such as poly(lactic acid) (PLA) remains a major obstacle to the expansion of cellulose nanocomposite applications. In this work, we employed the solvent evaporation technique commonly used for drug microencapsulation to suspend PLA in water as microparticles. The suspension of the microparticles was easily mixed with the CNFs prepared by high-pressure homogenization. Water removal by membrane filtration produced CNF sheets filled with the particles. Compression molding of the stacked sheets resulted in nanocomposites with good CNF dispersions. Increases in the modulus and strength (up to 58% and 210%, respectively) demonstrated the load-bearing capability of the CNF network in the composites.
Collapse
Affiliation(s)
- Tao Wang
- Composite Materials and Structures Center, Department of Chemical Engineering and Materials Science, Michigan State University (MSU), East Lansing, Michigan 48824, USA.
| | | |
Collapse
|