New selective “on-off” fluorescence chemosensor based on carbazole Schiff base for Fe3+ detection

Luminous Insights: Exploring Organic Fluorescent "Turn-On" Chemosensors for Metal-Ion (Cu+2, Al+3, Zn+2, Fe+3) Detection

There are several metal ions that are vital for the growth of the environmental field as well as for the biological field but only up to the maximum limit. If they are present in excess, it could be hazardous for the human health. With the growing technology, a series of various detection techniques are employed in order to recognize those metal ions, some of them include voltammetry, electrochemical methods, inductively couples, etc. However, these techniques are expensive, time consuming, requires large storage, advanced instrumentation, and a skilled person to operate. So, here comes the need of a sensor and it is defined as a miniature device which detects the substance of interest by giving response in the form of energy change. So, from past few decades, many sensors have been formulated for detecting metal ions with some basic characteristics like selectivity, specificity, sensitivity, high accuracy, lower detection limit, and response time. Detecting various metal ions by employing chemosensors involves different techniques such as fluorescence, phosphorescence, chemiluminescence, electrochemical, and colorimetry. The fluorescence technique has certain advantages over the other techniques. This review mainly focuses on the chemosensors that show a signal in the form of fluorescence to detect Al+3, Zn+2, Cu+2, and Fe+3 ions.

Biodynamers: applications of dynamic covalent chemistry in single-chain polymer nanoparticles

Dynamic Covalent Chemistry (DCC) enables the development of responsive molecular systems through the integration of reversible bonds at the molecular level. These systems are thermodynamically stable and capable of undergoing various molecular assemblies and transformations, allowing them to adapt to changes in environmental conditions like temperature and pH. Introducing DCC into the field of polymer science has led to the design of Single-Chain Nanoparticles (SCNPs), which are formed by self-folding via intramolecular crosslinking mechanisms. Defined by their adaptability, SCNPs mimic biopolymers in size and functionality. Biodynamers, a subclass of SCNPs, are specifically designed for their stimuli-responsive and tunable, dynamic properties. Mimicking complex biological structures, their scope of application includes target-specific and pH-responsive drug delivery, enhanced cellular uptake and endosomal escape. In this manuscript, we discuss the integration of DCC for the design of SCNPs, focusing particularly on the characteristics of biodynamers and their biomedical and pharmaceutical applications. By underlining their potential, we highlight the factors driving the growing interest in SCNPs, providing an overview of recent developments and future perspectives in this research field.

Novel Anthracene and Carbazole Based Aggregation Induced Enhanced Emission Active Schiff Base as a Selective Sensor for Cu2+ ions

In present work our group has synthesized two novel Schiff-bases, Di-Carbazole based Schiff-base (DB-1) and Di-Anthracene based Schiff-base (DB-2) using condensation reaction and characterized thorough different spectroscopic techniques such as mass spectrometry, IR spectroscopy, 1H and 13C NMR spectroscopy. Furthermore, the AIE(Aggregation induced emission) studies were done using water-THF mixture. As compared to pure THF, the DB-2 showed a 17.8-fold increase in fluorescence intensity with a bathochromic shift of 64 nm in 80% water: THF mixture. For DB-1increase was seen at 70% water-THF combination. The analysis of the dynamic light scattering (DLS) further supported this excellent AIEE (Aggregation induced enhanced emission) characteristic. Furthermore, the spectrofluorometric techniques were used to examine the capacity of both Schiff bases to detect the heavy metals. It was discovered that only DB-1, with a detection limit of 2.4 × 10-8 M, was selective for the Cu2+ ion, whereas DB-2 had no sensing capability for metal ions. The Job's plot was used to determine the stoichiometry ratio of the DB-1 with Cu2+ to further examine the process. It was discovered that the ratio was 1:1 (DB-1:Cu2+). Additionally, the association constant of DB-1 for Cu2+ was 5.1 × 1011 M-1, demonstrating the excellent binding affinity of DB-1 for the Cu2+ ion.

Protocatechualdehyde-ferric iron tricomplex embedded gelatin hydrogel with adhesive, antioxidant and photothermal antibacterial capacities for infected wound healing promotion

Because of the indiscriminate use of antibiotics and the increasing threat of drug-resist bacteria, there is an urgent need to develop novel antibacterial strategies to combat infected wounds. In this work, stable tricomplex molecules (PA@Fe) assembled by protocatechualdehyde (PA) and ferric iron (Fe) were successfully synthesized and then embedded in the gelatin matrix to obtain a series of Gel-PA@Fe hydrogels. The embedded PA@Fe served as a crosslinker to improve the mechanical, adhesive and antioxidant properties of hydrogels through coordination bonds (catechol-Fe) and dynamic Schiff base bonds, meanwhile acting as a photothermal agent to convert near-infrared (NIR) light into heat to kill bacteria effectively. Importantly, in vivo evaluation through an infected full-thickness skin wound mice model revealed that Gel-PA@Fe hydrogel developed collagen deposition, and accelerated reconstruction of wound closure, indicating great potential of Gel-PA@Fe hydrogel in promoting the healing process of infected full-thickness wounds.

Iminobenzophenone-thiophen hydrazide schiff base: a selective turn on sensor for paramagnetic Fe3+ ion and application in real sample analysis

A highly selective turn-on sensor for paramagnetic Fe³⁺ ions based on (E)-N'-((2-aminophenyl)(phenyl)methylene)thiophene-2-carbohydrazide is successfully synthesized. The sensor BPTH is significantly selective and sensitive towards Fe³⁺ ions over other interfering metal ions especially Cu²⁺ and Co²⁺ ions with a lowest limit of recognition 1.48 × 10^-7 M. The turn-on sensing mechanism involves enhanced charge transfer. Fe³⁺ ion forms strong binding with the ligand with a K_a value about 8.23 × 10⁴ M^-1 and a 1:1 stoichiometric ratio is confirmed by Job's plot experiment. With Fe³⁺ ion, the yellow ligand BPTH change to a green fluorescent and reversible with 1 equivalent of EDTA. Practical application of sensor is demonstrated in real sample analysis.

Schiff Bases: A Versatile Fluorescence Probe in Sensing Cations

Metal cations such as Zn²⁺, Al³⁺, Hg²⁺, Cd²⁺, Sn²⁺, Fe²⁺, Fe³⁺ and Cu²⁺ play important roles in biology, medicine, and the environment. However, when these are not maintained in proper concentration, they can be lethal to life. Therefore, selective sensing of metal cations is of great importance in understanding various metabolic processes, disease diagnosis, checking the purity of environmental samples, and detecting toxic analytes. Schiff base probes have been largely used in designing fluorescent sensors for sensing metal ions because of their easy processing, availability, fast response time, and low detection limit. Herein, an in-depth report on metal ions recognition by some Schiff base fluorescent sensors, their sensing mechanism, their practical applicability in cell imaging, building logic gates, and analysis of real-life samples has been presented. The metal ions having biological, industrial, and environmental significance are targeted. The compiled information is expected to prove beneficial in designing and synthesis of the related Schiff base fluorescent sensors.

Schiff Base Ligand 3-(-(2-Hydroxyphenylimino) Methyl)-4H-Chromen-4-One as Colorimetric Sensor for Detection of Cu2+, Fe3+, and V5+ in Aqueous Solutions

The ligand 3-(-(2-hydroxyphenylimino) methyl)-4H-chromen-4-one (SL) has been synthesized and examined as a chemosensor for some metal ions in aqueous solutions based on colorimetric analysis. Color changes were monitored using UV-visible spectroscopy. Binding stoichiometry and limit of detection (LOD) were estimated using titration experimentation based on UV-visible absorbance and Job's plot. The synthesized ligand was tested for selectivity in the presence of several cations and was examined for possible utility as a chemosensor in real water samples. The results indicated sensing ability and selectivity for Cu²⁺, Fe³⁺, and V⁵⁺. Stable complexes were formed between SL and Cu²⁺, Fe³⁺, and V⁵⁺, and the ligand-to-metal binding stoichiometry was found 2 : 1 in the SL-Cu²⁺ and SL-Fe³⁺ complexes, and 1 : 1 in the SL-V⁵⁺ complex. The results of LOD and bending constant were (7.03 μM, 1.37 × 10⁴ M^-1), (5.16 μM, 2.01 × 10⁴ M^-1), and (5.94 μM, 1.82 × 10⁴ M^-1) for Cu²⁺, Fe³⁺, and V⁵⁺, respectively.

Construction of an ultra-small hydrazone-linked covalent organic polymer for selective fluorescent detection of ferric ion in aqueous solution

A novel ultra-small hydrazone-linked covalent organic polymer (UHCOP) was synthesized based on the Schiff-base reaction between 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde and 1,4-benzenedicarbohydrazide at room temperature and utilized as a sensitive fluorescent sensor for rapid (<2 min) and selective detection of Fe³⁺ in aqueous solution. The prepared UHCOP displayed ultra-small size with the diameter of 7.98 ± 0.97 nm and gave a stable fluorescent emission at 510 nm. UHCOP exhibited good sensitivity and highly selectivity towards Fe³⁺. The coordination interaction between UHCOP and Fe³⁺ resulted in the obviously aggregation-caused quenching response of UHCOP. The linear range was from 5.0 μM to 1.4 mM (R² = 0.999) with the detection limit of 2.5 μM. Finally, UHCOP has been successfully applied in the detection of Fe³⁺ in real water samples, proving the fabricated UHCOP is promising as a sensitive fluorescent sensor for selective detection of Fe³⁺ in aqueous solution.

A new highly selective "off-on" typical chemosensor of Al3+, 1-((Z)-((E)-(3,5-dichloro-2-hydroxybenzylidene)hydrazono)methyl) naphthalene-2-ol, an experimental and in silico study

A new promising fluorescent chemosensor based on a 2-hydroxynaphthaldehyde skeleton was successfully synthesized through double imine formation as a yellow solid with an overall chemical yield of 63%. The compound showed UV/Visible maxima of at 394 nm in DMSO. Based on spectroscopic data of FTIR, ToF-HRMS, 1H-NMR, and 13C-NMR, the product was characterized as 1-((Z)-((E)-(3,5-dichloro-2-hydroxybenzilydine)hydrazono)methyl)naphthalene-2-ol. Upon experimental study, the compound was confirmed as a highly selective and reversible off-on typical chemosensor against Al3+ with an emission quantum yield of 0.203 ± 0.009. The Job's plot analysis revealed that a highly stable 1:1 complex was formed with an association constant of 8.73 × 105 M-1. A pH-dependent study showed that the sensor was potentially applicable at physiological conditions (pH 7-8) in a mixture of DMSO : H2O (99 : 1, v/v). The LoD and LoQ of the chemosensor towards Al3+ in DMSO were found to be 0.04 and 0.14 μM respectively. Based on DFT and TD-DFT calculation (B3LYP hybrid method/basis set of 6-311+G(d,p)), the sensing mechanism of the chemosensor to the ion was discovered as inhibition of excited-state intramolecular proton transfer (ESIPT).

2,3-Diaminomaleonitrile: A Multifaceted Synthon in Organic Synthesis

2,3-Diaminomaleonitrile (DAMN), a tetramer of hydrogen cyanide, displays weakly basic properties and has reactivity comparable to o-phenylenediamine. It has emerged as a versatile, cheap as well as a readily accessible building block towards the synthesis of a variety of organic compounds. The present review focuses on the applications of 2,3-diaminomaleonitrile for the synthesis of Schiff's base, imidazoles, pyrazines, quinoxolines, benzodiazocines, 1,4-diazepines, purines, pyrimidines, pyrazine-tetrazole hybrids, triazoles, thiadiazole, thiazolidines, porphyrazines, formamidines, 1,3,5-triazepines, pyrrolo[3,4-b][1,4]diazepin-6(3H)-ones, triaza[22]annulenes, pyrrolo[3,4-f][1,3,5]triazepines, spiro compounds, pyrazoles and 2,3-dicyano-5,7-bismethylthieno[3,4-b]pyrazine.

Synthesis, characterization, theoretical investigations and fluorescent sensing behavior of oligomeric azine-based Fe3+Chemosensors

Three azine oligomeric esters were synthesized, characterized by IR, UV, 1H, 13C{1H} and GPC technique, and applied to chemosensor application. The sensitivity response of the oligomers towards the metal ion was evaluated for a metal ion series. The results have shown selective and sensitive “turn off” fluorescence response towards Fe3+ ion in DMF/H2O (1:1, pH: 7.4, fluorophore: 5 μM) solution. The binding stoichiometry and binding constant of the fluorophores were calculated using the Stern–Volmer equation and Benesi–Hildebrand plots, respectively. The quenching of fluorophores on the addition of Fe3+ ion indicates the capability of fluorophore towards quantitative analysis of Fe3+. The dimer of oligomers was theoretically studied using DFT, B3LYP/6-311G level basic set to support and explain the quenching mechanism of LMCT, PET process and to explain the DC, AC electrical studies results. The electrical conductivity measurements of solid-state, I2 doped and undoped oligomers were carried out and the conductivity gradually increases with increase in iodine vapor contact time of oligomers. The electrical conductivity was related with band gap and charge density values of imine nitrogen obtained by Huckel calculations. The dielectric measurements at different temperatures and frequencies were made by two probe method. Among the oligomers, EBHAP has recorded a high dielectric constant at the low applied frequency of 50 Hz at 373 K due to loosely attached π bonds resulting good polarization.

Synthesis of an unprecedented H-stitched binuclear crystal structure based on selective fluorescence recognition of Zn2+ in newly synthesized Schiff base ligand with DFT and imaging application in living cells

Single hydrogen atom stitched giant binuclear crystal.

Study on the photochromism, photochromic fluorescence switch, fluorescent and colorimetric sensing for Cu2+ of naphthopyran-diaminomaleonitrile dyad and recognition Cu2+ in living cells

A well-designed naphthopyran-diaminomaleonitrile dyad (sensor 1) has been synthesized successfully, its molecular structure was well characterized by NMR and mass spectrometry. Sensor 1 exhibits excellent photochromic and photochromic fluorescence switch performance with reversible color change and good fatigue resistance upon alternating ultraviolet irradiation and thermal bleaching. In addition, sensor 1 displayed excellent fluorescent and colorimetric sensing ability towards Cu²⁺ ions with high selectivity and sensitivity. The addition of 5.0 equiv. of Cu²⁺ ions into sensor 1 (1 × 10^-5) in CH₃CN solution significantly quenched the fluorescence of sensor 1 by 80.0%. Furthermore, the addition of Cu²⁺ ions also caused the complete disappearance of the absorbance band at 350-450 nm in absorbance spectra of sensor 1 and accompanied by the distinct color change form yellow to colorless. Job's plot, mass spectrometry, ¹H NMR titration and DFT calculations proved that sensing performance was attributed to the formation of 1:1 sensor 1-Cu²⁺complexes. Sensor 1 can monitor the existence of Cu²⁺ ions in living cells via the fluorescence images. Sensor 1 showed great potential applications as chemosensor and photochromic materials.

Fluorescence study of 5-nitroisatin Schiff base immobilized on SBA-15 for sensing Fe3+

N’-(5-nitro-2-oxoindolin-3-ylidene) thiophene-2-carbohydrazide (NH) was successfully synthesized as a ligand, then grafted onto the surface of mesoporous silica SBA-15via an aminopropyl bridge. The successful grafting of ligand NH onto the hybrid nanomaterial (SBA-15/APTES-NH) was confirmed by infrared spectroscopy. On excitation at 276 and 370 nm, the ligand NH and the hybrid nanomaterial SBA-15/APTES-NH showed a strong and narrow emission peak centered at 533 nm. By dispersing SBA-15/APTES-NH in an aqueous solution containing metal ions, the resulting solid materials showed a higher binding of NH sensing site to Fe3+ ions as compared to the others with a quench of the emission intensity up to 84%. This result showed that the hybrid nanomaterial is a potential chemosensor that requires development for the detection of metal ions.

Metathesis of Functionalized Alkane: Understanding the Unsolved Story

For the first time, we developed a method which enables a functionalized alkane to be metathesized to its lower and higher homologues. For this metathesis reaction, we used [(≡Si-O-)W(CH3)5] as a catalyst precursor and 9-hexyl-9H-carbazole as a reactant.

A new benzimidazole-based selective and sensitive 'on-off' fluorescence chemosensor for Cu2+ ions and application in cellular bioimaging

Two new twinborn benzimidazole derivates (L and A), which bonded pyridine via the ester space on the opposite and adjacent positions of the benzene ring of benzimidazole respectively, were designed and synthesized. Compound L displayed fluorescence quenching response only towards copper(II) ions (Cu²⁺ ) in acetonitrile solution with high selectivity and sensitivity. However, compound A presented 'on-off' fluorescence response towards a wide range of metal ions to different degrees and did not have selectivity. Furthermore, compound L formed a 1:1 complex with Cu²⁺ and the binding constant between sensor L and Cu²⁺ was high at 6.02 × 10⁴  M^-1 . Job's plot, mass spectra, IR spectra, ¹ H-NMR titration and density functional theory (DFT) calculations demonstrated the formation of a 1:1 complex between L and Cu²⁺ . Chemosensor L displayed a low limit of detection (3.05 × 10^-6  M) and fast response time (15 s) to Cu²⁺ . The Stern-Volmer analysis illustrated that the fluorescence quenching agreed with the static quenching mode. In addition, the obvious difference of L within HepG2 cells in the presence and absence of Cu²⁺ indicated L had the recognition capability for Cu²⁺ in living cells.

Recent progress in development of 2,3-diaminomaleonitrile (DAMN) based chemosensors for sensing of ionic and reactive oxygen species

2,3-Diaminomaleonitrile (DAMN) has proved to be a valuable organic π-conjugated molecule having many applications in the area of chemosensors for sensing of ionic and neutral species because of its ability to act as a building block for well-defined molecular architectures and scaffolds for preorganised arrays of functionality. In this article, we discussed the utilization of 2,3-diaminomaleonitrile (DAMN) for the design and development of chemosensor molecules and their application in the area of metal ion, anion and reactive oxygen species sensing. Along with these, we present different examples of DAMN based chemosensors for multiple ion sensing. We also discuss the ion sensing mechanism and potential uses in other related areas of research.

2,3-Diamniomaleonitrile (DAMN) is valuable π-conjugated organic scaffold molecule for designing of efficient chemosensors for sensing of ionic and Reactive Oxygen Species (ROS).