Geochemical and mineralogical assessment of sedimentary limestone mine waste and potential for mineral carbonation

Mineralogical and chemical characterization of mining waste and utilization for carbon sequestration through mineral carbonation

Mining activities have often been associated with the issues of waste generation, while mining is considered a carbon-intensive industry that contributes to the increasing carbon dioxide emission to the atmosphere. This study attempts to evaluate the potential of reusing mining waste as feedstock material for carbon dioxide sequestration through mineral carbonation. Characterization of mining waste was performed for limestone, gold and iron mine waste, which includes physical, mineralogical, chemical and morphological analyses that determine its potential for carbon sequestration. The samples were characterized as having alkaline pH (7.1-8.3) and contain fine particles, which are important to facilitate precipitation of divalent cations. High amount of cations (CaO, MgO and Fe2O3) was found in limestone and iron mine waste, i.e., total of 79.55% and 71.31%, respectively, that are essential for carbonation process. Potential Ca/Mg/Fe silicates, oxides and carbonates have been identified, which was confirmed by the microstructure analysis. The limestone waste composed majorly of CaO (75.83%), which was mainly originated from calcite and akermanite minerals. The iron mine waste consisted of Fe2O3 (56.60%), mainly from magnetite and hematite, and CaO (10.74%) which was derived from anorthite, wollastonite and diopside. The gold mine waste was attributed to a lower cation content (total of 7.71%), associated mainly with mineral illite and chlorite-serpentine. The average capacity for carbon sequestration was between 7.73 and79.55%, which corresponds to 383.41 g, 94.85 g and 4.72 g CO2 that were potentially sequestered per kg of limestone, iron and gold mine waste, respectively. Therefore, it has been learned that the mine waste might be utilized as feedstock for mineral carbonation due to the availability of reactive silicate/oxide/carbonate minerals. Utilization of mine waste would be beneficial in light of waste restoration in most mining sites while tackling the issues of CO2 emission in mitigating the global climate change.

Carbon dioxide sequestration of iron ore mining waste under low-reaction condition of a direct mineral carbonation process

Mining waste that is rich in iron-, calcium- and magnesium-bearing minerals can be a potential feedstock for sequestering CO₂ by mineral carbonation. This study highlights the utilization of iron ore mining waste in sequestering CO₂ under low-reaction condition of a mineral carbonation process. Alkaline iron mining waste was used as feedstock for aqueous mineral carbonation and was subjected to mineralogical, chemical, and thermal analyses. A carbonation experiment was performed at ambient CO₂ pressure, temperature of 80 °C at 1-h exposure time under the influence of pH (8-12) and particle size (< 38-75 µm). The mine waste contains Fe-oxides of magnetite and hematite, Ca-silicates of anorthite and wollastonite and Ca-Mg-silicates of diopside, which corresponds to 72.62% (Fe₂O₃), 5.82% (CaO), and 2.74% (MgO). Fe and Ca carbonation efficiencies were increased when particle size was reduced to < 38 µm and pH increased to 12. Multi-stage mineral transformation was observed from thermogravimetric analysis between temperature of 30 and 1000 °C. Derivative mass losses of carbonated products were assigned to four stages between 30-150 °C (dehydration), 150-350 °C (iron dehydroxylation), 350-700 °C (Fe carbonate decomposition), and 700-1000 °C (Ca carbonate decomposition). Peaks of mass losses were attributed to ferric iron reduction to magnetite between 662 and 670 °C, siderite decarbonization between 485 and 513 °C, aragonite decarbonization between 753 and 767 °C, and calcite decarbonization between 798 and 943 °C. A 48% higher carbonation rate was observed in carbonated products compared to raw sample. Production of carbonates was evidenced from XRD analysis showing the presence of siderite, aragonite, calcite, and traces of Fe carbonates, and about 33.13-49.81 g CO₂/kg of waste has been sequestered from the process. Therefore, it has been shown that iron mining waste can be a feasible feedstock for mineral carbonation in view of waste restoration and CO₂ emission reduction.

CO2 Sequestration through Mineral Carbonation: Effect of Different Parameters on Carbonation of Fe-Rich Mine Waste Materials

Mineral carbonation is an increasingly popular method for carbon capture and storage that resembles the natural weathering process of alkaline-earth oxides for carbon dioxide removal into stable carbonates. This study aims to evaluate the potential of reusing Fe-rich mine waste for carbon sequestration by assessing the influence of pH condition, particle size fraction and reaction temperature on the carbonation reaction. A carbonation experiment was performed in a stainless steel reactor at ambient pressure and at a low temperature. The results indicated that the alkaline pH of waste samples was suitable for undergoing the carbonation process. Mineralogical analysis confirmed the presence of essential minerals for carbonation, i.e., magnetite, wollastonite, anorthite and diopside. The chemical composition exhibited the presence of iron and calcium oxides (39.58–62.95%) in wastes, indicating high possibilities for carbon sequestration. Analysis of the carbon uptake capacity revealed that at alkaline pH (8–12), 81.7–87.6 g CO2/kg of waste were sequestered. Furthermore, a particle size of <38 µm resulted in 83.8 g CO2/kg being sequestered from Fe-rich waste, suggesting that smaller particle sizes highly favor the carbonation process. Moreover, 56.1 g CO2/kg of uptake capacity was achieved under a low reaction temperature of 80 °C. These findings have demonstrated that Fe-rich mine waste has a high potential to be utilized as feedstock for mineral carbonation. Therefore, Fe-rich mine waste can be regarded as a valuable resource for carbon sinking while producing a value-added carbonate product. This is in line with the sustainable development goals regarding combating global climate change through a sustainable low-carbon industry and economy that can accelerate the reduction of carbon dioxide emissions.

Characterization of Gold Mining Waste for Carbon Sequestration and Utilization as Supplementary Cementitious Material

This study aims to identify the potential of gold mining waste for CO2 sequestration and its utilization for carbon storage in cementitious material. Samples of mine waste were identified from a gold mine for mineralogical and chemical composition analysis using X-ray diffractogram and scanning electron microscopy with energy-dispersive X-ray. Mine waste was utilized in a brick-making process as supplementary cementitious material and as an agent for CO2 capture and storage in bricks. Carbonation curing was incorporated in brick fabrication to estimate CO2 uptake of the brick product. Results indicated that the mine wastes were composed of silicate minerals essential for mineral carbonation such as muscovite and illite (major) and chlorite-serpentine, aerinite, albite and stilpnomelane (moderate/minor phases). The mine wastes were identified as belonging to the highly pozzolanic category, which has a great role in improving the strength properties of brick products. Carbonated minerals served as an additional binder that increased the strength of the product. CO2 uptake of the product was between 0.24% and 0.57% for bricks containing 40–60% of gold mine waste, corresponding to 7.2–17.1 g CO2/brick. Greater performance in terms of compressive strength and water adsorption was observed for bricks with 3 h carbonation curing. The carbonation product was evidenced by strong peaks of calcite and reduced peaks for calcium hydroxide from XRD analysis and was supported by a densified and crystalline microstructure of materials. It has been demonstrated that gold mine waste is a potential feedstock for mineral carbonation, and its utilization for permanent carbon storage in brick making is in line with the concept of CCUS for environmental sustainability.