Oral and inhalation bioaccessibility of potentially toxic elements in household dust from former Hg mining district, Idrija, Slovenia

Metal-bearing airborne particles from mining activities: A review on their characteristics, impacts and research perspectives

The presence of various contaminants in airborne dusts from metal mining sites poses obvious risks to human health and the environment. Yet, few studies have thoroughly investigated the properties of airborne particles in terms of their morphology, size distribution and chemical composition, that are associated with health effects around mining activities. This review presents the most recent knowledge on the sources, physicochemical characteristics, and health and environmental risks associated with airborne dusts from various mining and smelting operations. The literature reviewed found only one research on atmospheric dust associated with hydrometallurgical plants compared to a larger number of pyrometallurgical processes/smelters studies. In addition, there are relatively few works comparing the distribution of metals between the fine and coarse size fractions around mining sites. Our analysis suggests that (i) exposure pathways of metal(loid)s to the human body are defined by linking concentration data in human biosamples and contaminated samples such as soils, drinking water and food, and (ii) chitosan and its derivatives may serve as an environmentally friendly and cost-effective method for soil remediation, with removal rates for metal(loid)s around 70-95 % at pH 6-8, and as dust suppressants for unpaved roads around mining sites. The specific limit values for PM and metal(loid)s at mining sites are not well documented. Despite the health risks associated with fine particles around mining areas, regulations have tended to focus on coarse particles. While some air quality agencies have issued regulations for occupational health and safety, there is no global alignment or common regulatory framework for enforcement. Future research priorities should focus on investigating PM and secondary inorganic aerosols associated with hydrometallurgical processes and dust monitoring, using online metal(loid)s analysers to identify the driving parameters in the deposition and resuspension process.

The relationship between the inhalation bioaccessibility of potentially toxic elements in road dust from a heavily polluted industrial area and the source of their pollution

One of the sources of chronic exposure to potentially toxic elements (PTE), especially in polluted environments, is the inhalation of resuspended road dust (RD). The aim of this study is to assess the inhalation bioaccessibility of PTE in RD from highly polluted environments from mining/smelting industries and traffic, and to identify any correlations between the bioaccessibility fraction of PTE and the physicochemical characteristics of the particles. RD from the studied area contains extremely high total concentrations of Cr, V, and Mn, which are likely due to pollution from the smelting industry. Additionally, elevated total concentrations of other elements associated with traffic emissions including Zn, Cu, Pb, Sb, and Sn were also measured. The bioaccessibility of PTE was assessed using two synthetic extraction solutions - Gamble's solution (GS) and Artificial Lysosomal Fluid (ALF). The majority of elements showed negligible bioaccessibility in GS. However, quite high inhalation bioaccessibility was observed for Zn, Pb, Sb, Cd, and Mn in the ALF solution, with a mean bioaccessible fraction of 49, 51.5, 41, 50, and 40% respectively. The highest bioavailable fraction was measured for Cd (97%) in a sample collected near a steel production facility and for Pb (95%) in a sample collected near the highway. These results indicate that increased mobility of the elements in inhaled particles occurs only in the case of phagocytosis. The lowest inhalation bioavailability was measured for Cr (mean is 3%). Differential individual particle analysis revealed that about 60% of phases, mostly major (Cr,Ti,V)-bearing metallic alloys, silicates, oxides and sulphides, are stable in ALF solution, while 40% of phases, mostly (Fe,Ca,Mn)-bearing oxides, silicates, sulphides, metals and metallic alloys originating from steel production, ferrochrome, ferrosilicon and vanadium production and from traffic emissions have been heavily corroded or completely dissolved. The study provides valuable information to further assess health hazards from various emission sources.

Oral bioaccessibility of potentially toxic elements in various urban environmental media

An important aspect of geochemical studies is determining health hazard of potentially toxic elements (PTEs). Key information on PTEs behaviour in the human body in case of their ingestion is provided with the use of in vitro bioaccessibility tests. We analysed and compared oral bioaccessibility of a wide range of PTEs (As, Cd, Ce, Cr, Cu, Hg, La, Li, Ni, Pb, Sb, Sn, Zn), including some that are not often studied but might pose a human health hazard, in soil, attic dust, street dust, and household dust, using Unified BARGE Method (UBM). Additionally, feasibility of usage of scanning electron microscope techniques in analyses of solid residuals of UBM phases was tested. Results show that bioaccessible fractions (BAFs) of PTEs vary significantly between individual samples of the same medium, between different media and between the gastric and gastro-intestinal phases. In soil, attic dust and street dust, bioaccessibility of individual PTE is mostly higher in gastric than in gastro-intestinal phase. The opposite is true for PTEs in household dust. In all four media, with the exception of Pb in household dust, among the most bioaccessible PTEs in gastric phase are Cd, Cu, Pb, and Zn. During the transition from the stomach to small intestine, the mean BAFs of most elements in soil, attic dust, and street dust decreases. The most bioaccessible PTEs in gastro-intestinal phase are Cu, Cd, Ni, and As. Micromorphological and chemical characterisation at individual particle level before and after bioaccessibility test contribute significantly to the understanding of oral bioaccessibility.

Attic dust: an archive of historical air contamination of the urban environment and potential hazard to health?

A comprehensive study of attic dust in an urban area is presented. Its entire life cycle, from determining historical emission sources to recognising the processes that take place in attic dust and its potential to impact human health is discussed. Its chemical composition and morphological characteristics of individual solid particles reflect past anthropogenic activities. High levels of Be-Cd-Cu-Sb-Sn-Pb-Te-Zn and occurrence of Cu-Zn shavings are typical for an industrial zone characterised by a foundry and a battery factory. High levels of Co-Fe-Mo-Ni-W-Ba-Cr-Mg-Mn-Nb-Ti and occurrence of various solid Fe-oxides, particularly spherical particles, were identified in another industrial zone, which was dominated by the automotive and metal-processing industries. Emissions from coal combustion affected the distribution of S-Se-Hg-Tl-As-Ag-U. The predominant mineral in attic dust is gypsum, which was presumably formed in situ by the reaction of carbonate dust particles and atmospheric SO₂ gas. The high oral bioaccessibility of As-Cd-Cu-Pb-Zn in the gastric phase and high bioaccessibility of As-Cu-Cd-Ni in the gastrointestinal phase were identified. Determined characteristics of attic dust and identified possibilities of prolonged human exposure to it indicate that attic dust should be treated as an excellent proxy for historical air contamination as well as a potentially hazardous material for human health.

A Naphthalimide-Based Fluorescent Probe for the Detection and Imaging of Mercury Ions in Living Cells

The selective and efficient monitoring of mercury (Hg2+ ) contamination found in the environment and ecosystem has been carried out. Thus, a new 1,8-naphthalimide-based fluorescent probe NADP for the detection of Hg2+ based on a fluorescence enhancement strategy has been designed and synthesized. The NADP probe can detect Hg2+ with high selectivity and sensitivity and a low detection limit of 13 nm. The detection mechanism was based on a Hg2+ -triggered deprotection reaction, resulting in a dramatic change in fluorescence from colorless to green at physiological pH. Most importantly, biological investigation has shown that the NADP probe can be successfully applied to the monitoring of Hg2+ in living cells and zebrafish with low cytotoxicity.

Metal(Loids) Bioaccessibility in Road Dust from the Surrounding Villages of an Active Mine

Human activities, in general, cause a significant impact on the environment and human health. The present study aims to characterize the road dust of villages located near an active mine and to assess metal(loids) bioaccessible fractions. From the collected road dust samples (<250 µm fraction), the pseudo total, gastric (G) and gastrointestinal (GI) phase (UBM assay) concentrations, mineralogical composition, enrichment factor (EF), and risk for humans were determined. The obtained results revealed that arsenic represents the highest risk to humans, with mean pseudototal values higher than the maximum reference value range. The enrichment factor pointed to As as having significant to very high enrichment in all of the villages. In addition, Cd presented the maximum EF values in all of the villages, and was thus classified as having a very high enrichment. Particles enriched in As, Ca, Fe, Cu, Al, and Ti were identified by SEM-EDS in weathered agglomerates, and were linked to mine wastes and long-distance transport through both wind and/or traffic. The arsenic bioaccessibility fraction (%BAF) presented low values in the studied samples, possibly because of the low complex solubility of Fe with adsorbed As, limiting the release of arsenic and reducing its bioaccessibility. The concentrations of bioaccessible Cd for the G and GI phases were within the reference range, while for Cu, they were above and for Pb they were lower than the reference value range. The results show that the pseudototal fraction risk is overestimated when compared with BAF%; nevertheless, the total G and GI risks were above the carcinogenic target risk (1 × 10−6) in most of the samples. The carcinogenic risk of the bioaccessible contaminants showed that As represented the higher risk for developing cancer over a lifetime, with ingestion being the main risk route.