Characterization and removal of microplastics in a sewage treatment plant from urban Nagpur, India

Microplastics in aquatic systems: An in-depth review of current and potential water treatment processes

Plastic products, despite their undeniable utility in modern life, pose significant environmental challenges, particularly when it comes to recycling. A crucial concern is the pervasive introduction of microplastics (MPs) into aquatic ecosystems, with deleterious effects on marine organisms. This review presents a detailed examination of the methodologies developed for MPs removal in water treatment systems. Initially, investigating the most common types of MPs in wastewater, subsequently presenting methodologies for their precise identification and quantification in aquatic environments. Instruments such as scanning electron microscopy, dynamic light scattering, Fourier transform infrared spectroscopy, Raman spectroscopy, surface-enhanced Raman spectroscopy, and Raman tweezers stand out as powerful tools for studying MPs. The discussion then transitions to the exploration of both existing and emergent techniques for MPs removal in wastewater treatment plants and drinking water treatment plants. This includes a description of the core mechanisms that drive these techniques, with an emphasis on the latest research developments in MPs degradation. Present MPs removal methodologies, ranging from physical separation to chemical and biological adsorption and degradation, offer varied advantages and constraints. Addressing the MPs contamination problem in its entirety remains a significant challenge. In conclusion, the review offers a succinct overview of each technique and forwards recommendations for future research, highlighting the pressing nature of this environmental dilemma.

Exploring the abundance of microplastics in Indian landfill leachate: An analytical study

Landfills are a major source of many emerging pollutants, including microplastics (MPs). This makes them a potential threat to human and environmental health and calls for a more detailed analysis of their hazard potential. India is a developing country with multiple unscientific waste dumping sites. In spite of their hazardous nature, detailed studies on the abundance of microplastics in landfills in India are scanty. Current work investigates the abundance and diversity of MPs in two landfills of India, Uruli Devachi in Pune (S1) and Deonar in Mumbai (S2). MPs collected from landfill leachate using multiple filters were analyzed using an optical microscope and categorized on the basis of shape, color and size to give information on their distribution. MP abundance in S1 was 1473 ± 273.01 items/L while 2067 ± 593.75 items/L were found in leachate from S2. Film and fragment were the dominant shape and black was the dominant color of MP found in both the landfills. Maximum number of MPs were in the size range below 100 μm in both the landfills necessitating the study of small sized particles. Chemical characterization revealed the prevalence of four types of MPs (polyethylene terephthalate, polypropylene, cellulose acetate and polyvinyl chloride). This study sheds light on the prevalence, characteristics, abundance and distribution of MPs in landfill leachate in Western India, sparking more research into the processes followed for capturing the factual small sized microplastic abundance data. This study is vital for a detailed management of landfill leachate enabling a sustainable waste management and targeted actions for ecosystem preservation.

Unraveling the land-based discharge of microplastics from sewers to oceans - A comprehensive study and risk assessment in wastewaters of Goa, India

Owing to their pervasive dispersion in the environment and their potential ramifications on both marine life and human health, microplastics (MPs) are of increasing concern. However, there is still a lack of research on the release of MPs from different land-based pathways like creeks, drainage outfalls, and conduits into coastal water systems in India. This study represents comprehensive research into the attribution of MPs in the estuarine system, specifically those emanating from wastewater sources in Panjim City, Goa, India. Urban wastewater collected from different locations in and around Panjim City exhibited values ranging from 79 ± 21 to 338 ± 7 MPs/L, with a prevalence of fibrous and black MP particles. The size range of the MPs at all sampling sites was 100-300 μm. Analysis by μ-FTIR revealed 35 distinct polymeric compositions in wastewater, with a dominance of polyacrylamide (PAM), polyvinyl chloride (PVC), and polyamide (PA). Additionally, primary and secondary MPs were studied to unravel the contributions from land-based sources. This included the quantification of MPs in ten samples from personal care products (PCPs) and twenty samples from washing machine effluents (WMEs). MPs in PCPs ranged from 1.8 to 1554 MPs/g. Microfibres and fragments were predominant in WMEs (3986 to 4898 MPs/L). This study suggests a strong relation between polymers found in wastewater effluent and those present in PCPs and WMEs. The identified polymers showed high polymer hazard indices (IV and V), posing a significant threat to the ecosystem and a potential risk to human health.

Long-term presence of microplastics in aerobic and anaerobic sequential batch reactors: Effect on treatment, microbial diversity, and microplastics morphology

Sewage treatment plants (STPs) are identified as the significant sink and source of microplastics (MPs) in aquatic bodies and terrestrial systems. A major fraction of MPs gets retained in STPs for a longer duration, and their potentiality for secondary MPs generation and additives leaching remain under investigated. Therefore, this study focussed on the effect of long-term exposure of aerobic and anaerobic biological sewage treatment units on MPs, along with the effect of MPs on treatment efficiency and microbial consortium. A mixture of polyvinyl chloride, polystyrene, and nylon MPs at 262 MPs/L was spiked in the aerobic and anaerobic sequential batch reactors (SBRs) for 120 days at the start of study. The study revealed a release of noteworthy fraction of secondary MPs into the reactors from spiked MPs. At the end of 120th day, the presence of secondary generated MPs was estimated as 1000 ± 71 MPs/L and 650±141 MPs/L in aerobic and anaerobic SBRs respectively. Most of the observed secondary MPs were of size < 300 µm. Leaching of additives, i.e. cyclohexylamine, cyclotetradecane, octadecanol, pipericine etc., into the SBR effluents were also observed. The depuration capacities of the reactors were not affected with the presence of MPs during the study. While the microbial diversity and abundance were negatively impacted in aerobic SBRs, no such impacts were observed in anaerobic SBRs due to MPs. These results do suggest such exposures to potentially cause secondary MPs and chemical pollution in receiving matrices for the treated effluent, as well as effect on the native microbial community.

Estimated exposure to microplastics through national and local brands of bottled water in Central India

Microplastics (MPs) are ubiquitous pollutants that affect various environmental matrices, including air, water, soil, food, and beverages. In India, there is limited research on microplastics in bottled drinking water, which is a significant route of MP exposure to the human body. To date, the data on the occurrence of MPs in national and local bottled water brands have not been studied and compared. Therefore, the current study focuses on the contamination of MPs in bottled water from different national and local brands procured from the market of Nagpur, India. The MPs were observed in all the analyzed samples. It was observed that the local bottled water showed higher MP contamination compared to national bottled water, with MP concentrations of 212 ± 100 MPs/L and 72 ± 36 MPs/L, respectively. The MPs were identified and characterized using microscopic and attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR) analysis, revealing that the dominant MP particles were fragments (71%), followed by fibers (23%), and others (6%). Among the observed particles, 50% of particles were black colored, followed by transparent (16%), red (13%), orange (8%), green (3%), blue (5%), and yellow (5%). The predominant polymer types were polyethylene (PE) and polyethylene terephthalate (PET). Overall, the pollution load indices suggested a moderate level of contamination in bottled water samples. Furthermore, the estimated annual human exposure to MPs was calculated as 5186 ± 3751 p/kg-bw/year for children and 1482 ± 1072 p/kg-bw/year for adults, making it a significant route of human exposure to MPs.

Microplastics in the sediments along the eastern Arabian Sea shelf: Distribution, governing factors and risk assessment

Despite the omnipresence of microplastics (MPs), the studies around the western continental shelf of Indian Ocean (Eastern Arabian Sea-EAS) are uncovered and understudied. Thus, the present study was focused to understand the spatial distribution, characterization and risk assessment of MPs in sediment across seven coastal transects (10 to 50 m) all along the EAS shelf. The highest MPs concentration (MPs/kg d.w.) was detected in the northern EAS (NEAS; 2260 ± 1050) followed by central (CEAS; 1550 ± 1012) and southern (SEAS; 1300 ± 513) shelves. Among all distinct locations, the highest concentration of MPs (2500 ± 1042) was detected in the north coastal sediments off Mumbai, followed by off Mangalore (1480 ± 1169) in the center and off Kochi (1350 ± 212) in the south. MPs were found in the form of fibres, fragments and films with a predominance of fibres (~70-80 %). Approximately 74.6 % of the total MPs were in the size range of 300 μm to 5 mm. The surface of detected MPs was rough, irregular, and mechanical weathering features such as pits, grooves also observed and spotted with bacterial community structures. Polypropylene (PP; 34 %), polyisoprene (PIP; 19 %), butyl rubber (18 %), and low-density polyethylene (LDPE; 13 %) were dominant polymers. The pollution load index highlighted minor risk while the polymer hazard index exhibited a hazard level of V. Litter discharge, fishing activities, and active marine navigation are among the many high-risk sources of plastic contamination in this region. Due to the prevailing winds, currents, low sea surface height, and high precipitation, the conditions in the EAS are favorable for the accumulation of both sea-based and land-based particles. Hence, this study provides novel insights into the potential risks posed by MP to the IO rim and associated marine ecosystem which will enhance our knowledge of the ecological implications and consequences of MP pollution, ultimately aiding in developing effective management and mitigation strategies.

Degradation mechanism of microplastics and potential risks during sewage sludge co-composting: A comprehensive review

Microplastics (MPs) as a kind of emerging contaminants, widely exists in various kinds of medium, sewage sludge (SS) is no exception. In the sewage treatment process, a large number of microplastics will be deposited in SS. More seriously, microplastics in sewage sludge can migrate to other environmental media and threaten human health. Therefore, it is necessary to remove MPs from SS. Among the various restorations, aerobic composting is emerging as a green microplastic removal method. There are more and more reports of using aerobic compost to degrade microplastics. However, there are few reports on the degradation mechanism of MPs in aerobic composting, hindering the innovation of aerobic composting methods. Therefore, in this paper, the degradation mechanism of MPs in SS is discussed based on the environmental factors such as physical, chemical and biological factors in the composting process. In addition, this paper expounds the MPs in potential hazards, and combined with the problems in the present study were studied the outlook.