Enhancement of photocatalytic activities of ZnFe2O4 composite by incorporating halloysite nanotubes for effective elimination of aqueous organic pollutants

Efficient removal of crystal violet dye from water using zinc ferrite-polyaniline nanocomposites

Nanomaterials are widely employed in wastewater treatment, among which nanoferrites and their composites hold significant prominence. This study adopts a green approach to synthesize zinc ferrite nanoparticles, subsequently integrating them with polyaniline (PANI) to fabricate the ZnFe2O4-PANI nanocomposite. Characterization of the prepared ZnFe2O4-PANI nanocomposite was conducted using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopic (SEM) techniques. Using Scherrer's equation, the crystallite size of the synthesized zinc ferrite nanoparticles was found to be 17.67 nm. SEM micrographs of the ZnFe2O4-PANI nanocomposite revealed that in situ polymerization of ZnFe2O4 with polyaniline transforms the amorphous surface morphology of the polymer into a homogeneous nanoparticle structure. The adsorption of crystal violet (CV) dye onto the surface of the ZnFe2O4-PANI nanocomposite depends on pH, adsorbent dosage, temperature, concentration levels and duration. The Langmuir adsorption model fitted the data well, indicating adherence to a pseudo-second-order kinetic pattern. Thermodynamic values ΔG°, ΔH° and ΔS° indicated that the adsorption process occurred spontaneously. Advantages and disadvantages of the technique have also been highlighted. Mechanism of adsorption is discussed. From the obtained results, it is evident that the ZnFe2O4-PANI nanocomposite holds promise as a sorbent for the removal of dye from wastewater.

The mechanism and reaction kinetics of visible light active bismuth oxide deposited on titanium vanadium oxide for aqueous diclofenac photocatalysis

Non-uniform, non-spherical bismuth oxide deposited on titanium vanadium oxide (3%-BVT1) was successfully synthesized via co-precipitation method and assessed for visible light degradation of aqueous diclofenac. The synthesized photocatalysts were characterized using X-ray diffraction, diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. Up to 80.7% diclofenac degradation was observed with a significant increment in reaction rate compared to commercially available Degussa P25 (kapp = 0.0013 → 0.0083 min-1) achieved within 3 h treatment time under optimized parameters of diclofenac concentration (10 mg L-1), catalyst loading (0.1 g L-1), and pH (5). The enhanced photocatalysis could be due to electron-hole separation and contribution of powerful oxidative species •OH > O2•-  > h+  >  > e-. The recyclability experiments indicate that 3%-BVT1 retained its efficiency up to 74.1% over five reaction cycles. Gas chromatography-mass spectrometry analysis indicated the formation of several transformation products during the degradation pathway. The studies of interfering ions depicted mild interference by sulfates, while interference by phosphates and nitrates was negligible during photocatalytic process, i.e., 70, 78.01, and 78.43% for the selected concentrations of 50, 25, and 40 mg L-1 as per their maximum concentrations detected in the natural wastewaters. Thus, 3%-BVT1 is a potential versatile candidate to treat various organic pollutants including pharmaceuticals.

Extraction of Covid-19 drug (Favipiravir) from plasma samples by yolk-shell mesoporous silica before HPLC-MS/MS determination

In this work, a simple and inexpensive dispersive solid phase extraction method using SiO2 @MCM-41-Co3O4 yolk shell as a sorbent was developed for the extraction of favipiravir from plasma samples. The sorbent was synthesized with a simple and novel method. Optimization of the extraction procedure was performed using one parameter at a time strategy. For selective measurement of favipiravir in real samples, multiple reaction monitoring mode in high-performance liquid chromatography-tandem mass spectrometry was used. The synthesized sorbent presented a high adsorption capacity for favipiravir due to its mesoporous structure and different interactions. After optimization of effective parameters including the amount of sorbent, pH, and adsorption and desorption times, the analytical parameters of the method were evaluated. The developed method exhibited a wide linear range from 0.50 to 1000 μg/L. The detection limit and quantification limit of the method were 0.15 and 0.50 μg/L, respectively. The relative standard deviation of the method was obtained by using intra- and inter-day tests, and in both cases, it was less than 6.0%. Finally, the method was successfully used to measure favipiravir in plasma samples with relative recoveries in the range of 87-105%.

Novel surface structure of LaFeO3/nitrogen-deficient g-C3N4 nanocomposites to improve visible-light photocatalytic performance toward phenol removal

Herein, novel surface structure LaFeO3/nitrogen-deficient g-C3N4 nanocomposites (LaFeO3/g-C3N4-H) have been successfully synthesized by a two-step process. First, nitrogen-deficient graphitic carbon nitride (g-C3N4-H) was produced by thermally condensing melamine that had been treated with acetic acid as a precursor. After that, LaFeO3 was incorporated into the g-C3N4-H nanosheets. The as-prepared nanostructured materials were characterized by XRD, FT-IR, N2 adsorption-desorption experiments, FESEM, and TEM, demonstrating the formation of interfacial interaction and heterogeneous structure in LaFeO3/g-C3N4-H nanocomposites. Additionally, UV-vis diffuse reflectance spectra (DRS) and photoluminescence spectra (PL) have been used to assess the optical properties of the nanohybrids. The results show that the LaFeO3/g-C3N4-H nanocomposite was successfully produced with a reliable interfacial interface, and produced a good heterojunction relationship between g-C3N4-H and LaFeO3 which may significantly boost the photocatalytic activity as compared to prinstine g-C3N4 and LaFeO3. Phenol degradation under visible light irradiation was used to test the photocatalytic activity of LaFeO3/g-C3N4-H, and the results showed that 10%-LaFeO3/g-C3N4-H had significant photocatalytic activity and remarkable adsorption efficiency, with an overall removal rate of phenol up to 88% after 180 min of visible light irradiation. This study may present a novel method for developing highly efficient artificial photocatalytic systems.

Rhodamine B functionalized silver nanoparticles paper discs as turn-on fluorescence sensor, coupled with a smartphone for the detection of microbial contamination in drinking water

The precise detection of pathogenic microorganisms is crucial for the reduction of water-borne diseases. Herein, a filter-paper-based florescent chemosensor was fabricated for the detection of Escherichia coli and Staphylococcus aureus contamination exploiting protein-DNA interaction between the target and a specific probe. The sensing mechanism involved the self-assembly of Rhodamine B (RhB) on silver nanoparticles (AgNPs) surface that was labeled with a single-stranded DNA probe. This causes the fluorescence quenching of RhB by a distant-dependant process. The hybridization between pathogen-specific probe and bacterial surface protein causes the release of fluorescence of RhB, which was observed under UV light. For paper-based bio-surface preparation, the mixture comprising RhB-AgNP-ssDNA was drop-casted on filter paper discs. The conditions were optimized using isolated genomic DNA of the microbes. The method was applied for E.coli detection using an eae gene-based probe targeting intimin protein and S. aureus detection using tuf gene-based probe targeting EF-tuf protein on the microbe's surface. The chemosensor had a notable specificity and selectivity for E.coli, and S. aureus, with detection limits of 0.6 × 108 and 0.37 × 103 CFU/mL respectively. Moreover, the sensor was tested on real water samples, which presented excellent reproducibility of results (RSD ≤ 0.24%). Furthermore, the gradient change of fluorescence was captured by a smartphone, which allows direct detection of pathogens in a sensitive semi-quantitative way without the need for expensive instruments. The designed chemosensor can serve as a simple, inexpensive, and rapid method for the on-site detection of microbial contamination in drinking water.

Determination of methotrexate in plasma and environmental samples using an electrochemical sensor modified by UiO66-NH2/mesoporous carbon nitride composite and synergistic signal amplification with decorated AuNPs

Electrochemical methods have low toxicity, fast response and, easy operation. By modifying electrochemical sensors with a conductive and porous modifier, their sensitivity and selectivity can be improved. Nanomaterials with new and extraordinary properties are a new approach in science and especially in electrochemical sensors. In this study, UiO66-NH2/mesoporous carbon nitride (M - C3N4) composite provides a porous structure for decorated Au nanoparticles (AuNPs) to prepare a potent modifier for carbon paste electrode (CPE). Due to environmental toxicity of methotrexate, its sensitive, fast and, low-cost determination in workplace environments is of great interest. So, the modified CPE was applied as a sensitivity analysis approach for methotrexate in plasma samples. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used as techniques to optimize the analysis and measurement of methotrexate. To measure this drug, several effective parameters were optimized and a calibration curve was drawn under optimal conditions. The calibration curve showed a linear range from 0.5 to 150 μM with a detection limit of 0.15 μM for methotrexate. Examining the repeatability of the response of one electrode and multiple electrodes under optimal conditions shows the high precision of the developed method. Finally, this developed method based on UiO66-NH2/M-gC3N4/AuNPs|CPE was used to determine the methotrexate in the plasma sample using the standard addition method.

Preparation of high-performance supercapacitor electrode with nanocomposite of CuO/NCNO flower-like

Due to the importance of energy storage systems based on supercapacitors, various studies have been conducted. In this research CuO, NCNO and the flower like CuO/NCNO have been studied as a novel materials in this field. The resulte showed that the synthesized CuO nanostructutes have flower like morphology which studied by FE-SEM analisis. Further, the XRD pattern confirmed the crystalline properties of the CuO/NCNO nanocomposite, and the Raman verified the functional groups and vibrations of the components of CuO/NCNO nanocomposite. In a two-electrode system at a current density of 4 A/g, the capacitance, power density, and energy density were 450 F/g, 3200 W/kg, and 98 Wh/kg, respectively. The charge transfer resistances of CuO and NCNO/CuO electrodes obtained 8 and 2 Ω respectively, which show that the conductivity and supercapacitive properties of nanocomposite are better than pure components. Also, the stability and low charge transfer resistance are other advantages obtained in a two-symmetrical electrode investigation. The stability investigation showed that after 3000 consecutive cycles, only 4% of the initial capacitance of the CuO/NCNO electrode decreased.

Nano-crystallite bones of Oreochromis niloticus and Katsuwonus pelamis for the photocatalytic degradation of Congo red dye

The bones of two fish species, Oreochromis niloticus and Katsuwonus pelamis, were chosen in this research for evaluating their photocatalytic efficacy under solar radiation. The fish bones were isolated and conditioned before analyzing crystallographic parameters. The samples were characterized by using different instrumental techniques such as Fourier Transform Infrared (FTIR), X-ray diffraction (XRD), Energy Dispersive X-ray (EDX), Field Emission Scanning Electronic Microscopy (FESEM), and optical bandgap. From the XRD data, various types of crystallographic information such as crystallite size, microstrain, lattice parameters, dislocation density, degree of crystallinity, crystallinity index, Hydroxylapatite (HAp), the volume fraction of β-TCP, β-Tricalcium phosphate (β-TCP) percentage, and specific surface area were evaluated. Different model equations such as the Sahadat-Scherrer model, Linear Straight-line model, Monshi-Scherrer's method, and Williamson-Hall plot were employed to justify the nano-crystallite size. The photocatalytic efficacy of the two types of samples was explored by changing the catalyst concentration, dye concentration, interaction time, pH of the solution, etc. under solar irradiation.

A Modified Electrochemical Sensor Based on N,S-Doped Carbon Dots/Carbon Nanotube-Poly(Amidoamine) Dendrimer Hybrids for Imatinib Mesylate Determination

Imatinib mesylate, an anticancer drug, is prescribed to treat gastrointestinal stromal tumors and chronic myelogenous leukemia. A hybrid nanocomposite of N,S-doped carbon dots/carbon nanotube-poly(amidoamine) dendrimer (N,S-CDs/CNTD) was successfully synthesized and used as a significant modifier to design a new and highly selective electrochemical sensor for the determination of imatinib mesylate. A rigorous study with electrochemical techniques, such as cyclic voltammetry and differential pulse voltammetry, was performed to elucidate the electrocatalytic properties of the as-prepared nanocomposite and the preparation procedure of the modified glassy carbon electrode (GCE). A higher oxidation peak current was generated for the imatinib mesylate on a N,S-CDs/CNTD/GCE surface compared to the GCE and CNTD/GCE. The N,S-CDs/CNTD/GCE showed a linear relationship between the concentration and oxidation peak current of the imatinib mesylate in 0.01-100 μM, with a detection limit of 3 nM. Finally, the imatinib mesylate's quantification in blood-serum samples was successfully performed. The N,S-CDs/CNTD/GCE's reproducibility and stability were indeed excellent.