Undecyl substitution in imidazole and its action on corrosion inhibition of copper in aerated acidic chloride media

Application of porous metal enrichment probe sampling to single cell analysis using matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS)

There is an increasing need for analyzing metabolism in a single cell, which is important to understand the nature of cellular heterogeneity, disease, growth and specialization, etc. However, single cell analysis is often challenging for the traces of samples. In the present study, porous metal enrichment probe sampling combined with matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS) has been applied for in situ analysis of live onion epidemic cell. Porous probe, treated by corroding copper wire with HCl, was directly inserted into a single cell to get cell solution. A self-made linear actuator was enough to control the penetration of probe into the target cell accurately. Then samples on the tip of probe were eluted and detected by a commercial MALDI-TOF-MS directly. The formation of porous microstructure on the probe surface increased the adsorptive capacity of cell solution. The sensitivity of porous probe sampling was 6 times higher than uncorroded probes generally. This method provides a sensitive and convenient way for the sampling and detection of single cell solution. Copyright © 2015 John Wiley & Sons, Ltd.

Adsorption of 1- and 2-butylimidazoles at the copper/air and steel/air interfaces studied by sum frequency generation vibrational spectroscopy

The structure of thin films of 1- and 2-butylimidazoles adsorbed on copper and steel surfaces under air was examined using sum frequency generation (SFG) vibrational spectroscopy in the ppp and ssp polarizations. Additionally, the SFG spectra of both isomers were recorded at 55 °C at the liquid imidazole/air interface for reference. Complementary bulk infrared, reflection-absorption infrared spectroscopy (RAIRS), and Raman spectra of both imidazoles were recorded for assignment purposes. The SFG spectra in the C-H stretching region at the liquid/air interface are dominated by resonances from the methyl end group of the butyl side chain of the imidazoles, indicating that they are aligned parallel or closely parallel to the surface normal. These are also the most prominent features in the SFG spectra on copper and steel. In addition, both the ppp and ssp spectra on copper show resonances from the C-H stretching modes of the imidazole ring for both isomers. The ring C-H resonances are completely absent from the spectra on steel and at the liquid/air interface. The relative intensities of the SFG spectra can be interpreted as showing that, on copper, under air, both butylimidazoles are adsorbed with their butyl side chains perpendicular to the interface and with the ring significantly inclined away from the surface plane and toward the surface normal. The SFG spectra of both imidazoles on steel indicate an orientation where the imidazole rings are parallel or nearly parallel to the surface. The weak C-H resonances from the ring at the liquid/air interface suggest that the tilt angle of the ring from the surface normal at this interface is significantly greater than it is on copper.

Inhibition of Mild Steel Corrosion by 3-Benzoylmethyl Benzimidazolium Hexafluoroantimonate in Acidic Solution

The corrosion inhibition of mild steel in 1 M HCl solution by a synthesized compound (3-benzoylmethyl benzimidazolium hexafluoroantimonate) was investigated electrochemically and by weight loss experiments. The concentration of this inhibitor ranged from5 ×10-7 M to5×10-4 M. The effect of temperature (from 303 to 343 K) and concentrations (from5×10-7 M to5×10-4 M) were investigated. The percentage inhibition increased with the increase of the concentration of the inhibitor and reached about 98% at the concentration of5×10-4 M at 303 K. The percentage inhibition decreased with the increase of temperature. The thermodynamic parameters for the adsorption of this inhibitor on the metal surface were calculated. This compound was found to be a very good corrosion inhibitor due to the presence of nitrogen in benzimidazole and phenyl ring.

Electrochemical Study on Corrosion Inhibition of Copper in Hydrochloric Acid Medium and the Rotating Ring-Disc Voltammetry for Studying the Dissolution

Dissolution characteristics of copper in hydrochloric acid medium and the effect of 4-amino 1,2,4-triazole (ATA) on the corrosion process have been studied using conventional electrochemical techniques and rotating ring-disc electrodes (RRDEs). Corrosion potential () and corrosion current density () were obtained by Tafel extrapolation methods. Charge transfer resistance () and double-layer capacitance () were obtained from the electrochemical impedance spectroscopy (EIS). ATA was shown to be an effective inhibitor for the copper-corrosion inhibition in acid medium. The corrosion rate was retarded in presence of inhibitors mainly because of the adsorption of the inhibitor on the electrode surface. Adsorption of the inhibitor on the metal surface was found to follow the Langmuir adsorption isotherm. Standard free energy change of the adsorption process () was calculated to be −54.3 kJ mol−1; such a large negative value of suggests the prescence of a chemisorption process.

The Effect of Ionic Liquids on the Corrosion Inhibition of Copper in Acidic Chloride Solutions

The influence of the concentration of the 1-Butyl-3-methylimidazolium chloride (BMIMCl) and 1-Butyl-3-methylimidazolium bromide (BMIMBr) as ionic liquids (ILs) on the corrosion inhibition of copper in 1.0 M Cl−solutions of pH 1.0 was studied. The investigation involved electrochemical polarization methods as well as electrochemical quartz crystal microbalance (EQCM) technique and scanning electron microscopy (SEM). The inhibition efficiency increases with an increase in the concentration of BMIMCl and BMIMBr. Adherent layers of inhibitors were postulated to account for the protective effect. Both of the compounds act as a mixed-type inhibitor. The values of standard free energy of adsorption suggest the chemical adsorption BMIMCl and BMIMBr on the copper surface.