PEDOT/Palladium composite material: synthesis, characterization and application to simultaneous determination of dopamine and uric acid

Construction of a Au@MoS2 composite nanosheet biosensor for the ultrasensitive detection of a neurotransmitter and understanding of its mechanism based on DFT calculations

MoS₂ nanosheets can be applied as electrochemical biosensors to selectively and sensitively respond to the surrounding environment and detect various biomolecules due to their large specific surface area and unique physicochemical properties. In this paper, single-layer or few-layer MoS₂ nanosheets were prepared by an improved liquid phase stripping method, and then combining the unique material characteristics of MoS₂ and the metallic property of Au nanoparticles (AuNPs), Au@MoS₂ composite nanosheets were synthesized based on MoS₂ nanosheets. Then, the structure and properties of MoS₂ nanosheets and Au@MoS₂ composite nanosheets were comprehensively characterized. The results proved that AuNPs were successfully loaded on MoS₂ nanosheets. At the same time, on the basis of the successful preparation of Au@MoS₂ composite nanosheets, an electrochemical biosensor targeting dopamine was successfully constructed by cyclic voltammetry. The linear detection range was 0.5–350 μM, and the detection limit was 0.2 μM. The high-sensitive electrochemical detection of dopamine has been achieved, which provides a new idea for the application of MoS₂-based nanomaterials in the biosensing of neurotransmitters. In addition, density functional theory (DFT) was used to explore the electrochemical performance of Au@MoS₂ composite nanosheets. The results show that the adsorption of Au atoms on the MoS₂ 2D structure improves the conductivity of MoS₂ nanosheets, which theoretically supports the possibilities of its application as a platform for the ultrasensitive detection of neurotransmitters or other biomolecules in the field of disease diagnosis.

An electrochemical biosensor based on Au@MoS₂ composite nanosheets was successfully prepared for the high-sensitivity detection of dopamine.

Discrimination of dopamine by an electrode modified with negatively charged manganese dioxide nanoparticles decorated on a poly(3,4 ethylenedioxythiophene)/reduced graphene oxide composite

A unique nanocomposite was fabricated using negatively charged manganese dioxide nanoparticles, poly (3,4-ethylenedioxythiophene) and reduced graphene oxide (MnO₂/PEDOT/rGO). The nanocomposite was deposited on a glassy carbon electrode (GCE) functionalized with amino groups. The modified GCE was used to electrochemically detect dopamine (DA). The surface morphology, charge effect and electrochemical behaviours of the modified GCE were characterized by scanning electron microscopy, energy dispersive X-ray analysis (EDX), cyclic voltammetry and electrochemical impedance spectroscopy, respectively. The MnO₂/PEDOT/rGO/GCE exhibited excellent performance towards DA sensing with a linear range between 0.05 and 135 µM with a lowest detection limit of 30 nM (S/N = 3). Selectivity towards DA was high in the presence of high concentrations of the typical interferences ascorbic acid and uric acid. The stability and reproducibility of the electrode were good. The sensor accurately determined DA in human serum. The synergic effect of the multiple components of the fabricated nanocomposite were critical to the good DA sensing performance. rGO provided a conductive backbone, PEDOT directed the uniform growth of MnO₂ and adsorbed DA via pi-pi and electrostatic interaction, while the negatively charged MnO₂ provided adsorption and catalytic sites for protonated DA. This work produced a promising biosensor that sensitively and selectively detected DA.

Electroactive Metal Complexes Covalently Attached to Conductive PEDOT Films: A Spectroelectrochemical Study

The successful covalent attachment, via copper(I)-catalyzed azide alkyne cycloaddition (CuAAC), of alkyne-functionalized nickel(II) and copper(II) macrocyclic complexes onto azide (N₃)-functionalized poly(3,4-ethylenedioxythiophene) (PEDOT) films on ITO-coated glass electrodes is reported. To investigate the surface attachment of the selected metal complexes, which are analogues of the cobalt-based complex previously reported to be a molecular catalyst for hydrogen evolution, first, three different PEDOT films were formed by electropolymerization of pure PEDOT or pure N₃-PEDOT, and last, 1:2N₃-PEDOT:PEDOT were formed by co-polymerizing a 1:4 mixture of N₃-EDOT:EDOT monomers. The successful surface immobilization of the complexes on the latter two azide-functionalized films, by CuAAC, was confirmed by X-ray photoelectron spectroscopy (XPS) and electrochemistry as well as by UV-vis-NIR and resonance Raman spectroelectrochemistry. The ratio between the N₃ groups, and hence, the number of surface-attached metal complexes after CuAAC functionalization, in pristine N₃-PEDOT versus 1:2N₃-PEDOT:PEDOT is expected to be 3:1 and seen to be 2.86:1 with a calculated surface coverage of 3.28 ± 1.04 and 1.15 ± 0.09 nmol/cm², respectively. The conversion, to the metal complex attached films, was lower for the N₃-PEDOT films (Ni 74%, Cu 76%) than for the copolymer 1:2N₃-PEDOT:PEDOT films (Ni 83%, Cu 91%) due to the former being more sterically congested. The Raman and UV-vis-NIR results were simulated using density functional theory (DFT) and time-dependent DFT (TD-DFT), respectively, and showed good agreement with the experimental data. Importantly, the spectroelectrochemical behavior of both anchored metal complexes is analogous to that of the free metal complexes in solution. This proves that PEDOT films are promising conducting scaffolds for the covalent immobilization of metal complexes, as the existing electrochromic features of the complexes are preserved on immobilization, which is important for applications in electrocatalytic proton and carbon dioxide reduction, optoelectronics, and sensing.

Ultrasound-assisted synthesis of α-MnS (alabandite) nanoparticles decorated reduced graphene oxide hybrids: Enhanced electrocatalyst for electrochemical detection of Parkinson's disease biomarker

Herein, novel manganese sulfide nanoparticles (MnS NPs) decorated reduced graphene oxide (rGOS) nanocomposite have been designed through a facile ultrasound-assisted method and followed by a sonication process. After then, as-synthesized α-MnS@rGOS was characterized by HRTEM, FESEM, XPS, XRD and EIS. Furthermore, the α-MnS@rGOS nanocomposite modified SPCE (screen-printed carbon electrode) shows excellent electrochemical sensing performance towards Parkinson's disease biomarker of dopamine (DA). Moreover, the fabricated sensor showed a wide linear range for dopamine between 0.02 and 438.6 µM and nanomolar detection limit (3.5 nM). In addition, the α-MnS@rGOS modified SPCE showed selectivity towards the detection of dopamine in presence of a 10-fold higher concentration of other important biomolecules. The nanocomposite film modified SPCE sensor was good stable and reproducible towards the detection of Parkinson's disease biomarker. Furthermore, the as-synthesized α-MnS@rGOS nanocomposite modified SPCE has been applied to the determination of dopamine in human serum, rat serum and pharmaceutical samples with acceptable recoveries.

The role of pramipexole functionalized MWCNTs to the fabrication of Pd nanoparticles modified GCE for electrochemical detection of dopamine

BACKGROUND

Interest in functionalized carbon nanotubes for many applications arises from a variety on the kind of modification atoms or molecules that are attached to it. Dopamine, the feel-good hormone, release by neurons and playing an important role in body systems. Abnormal dopamine levels cause nerve disorders such as Parkinson's disease and schizophrenia.

OBJECTIVES

The aim of this study was the design and fabrication of electrochemical sensor based on MWCNTs and Pd nanoparticles for detection and determination of dopamine in biological samples.

METHODS

For this purpose, we report the synthesis of pramipexole-functionalized MWCNTs (pp-MWCNTs) for efficient capture of palladium nanoparticles and fabrication of Pd/pp-MWCNTs nanocomposite. Morphological and structural characteristics of the nanocomposites were characterized using various techniques including field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FT-IR).

RESULTS

This newly synthesized nanocomposite may have numerous applications in nanotechnology and sensing. We show that the synthesized nanocomposite reported here will be applicable for modifications of bare glassy carbon electrode (Pd/pp-MWCNTs/GCE) to sense of dopamine electrochemically. Two linear calibrations for dopamine are obtained over ranges of 0.01 to 10 μM and 10 to 200 μM with a detection limit of 1.4 nM. The Pd/pp-MWCNTs/GCE shows high stability and sensitivity, and an acceptable decrease of over-potential for the electrooxidation of dopamine that decreases interference in the analysis. The proposed Pd/pp-MWCNTs nanocomposite can be used as a voltammetric detector for dopamine monitoring in routine real sample analysis.

CONCLUSIONS

The proposed sensor showed high sensitivity and selectivity in sensing dopamine in biological samples. Graphical abstract Preparation of Pd/pp-MWCNTs/GCE for detection of dopamine.

Composites of Poly (3,4-Ethylenedioxythiophene) with Nanostructures as Electrochemical Sensors for Application in Bioelectroanalysis

Background:

The article presents the state of research on conductive composite materials constructed on the basis of poly (3,4-ethylenedioxythiophene) (PEDOT), a conductive polymer, as well as selected nanoparticles and nanostructures. Combining two or more materials in a composite which is later used in electrode modification can result in obtaining an electrode with new, more desirable properties. One of such fields is pharmacological analysis which, due to the continuous emergence of new substances and often also a need for analyte determination in complex samples, requires newer instruments in the form of suitably sensitive and selective sensors.

Contents:

The review contains the description of properties of PEDOT and composite PEDOT with polystyrenesulfonates. In the following part, composite materials are described: PEDOT-CNT, PEDOT- nanoparticles, PEDOT-graphene. The review closes with the examples of multi-component composite materials.

Conclusion:

The on-going development of new substances used in medicine, pharmacy and related fields, as well as the continuous increase in the production and consumption of this type of substances, necessitates constant development and modernization of analytical techniques used for their determination.

:

Biomedical assays require being able to carry out determinations in different systems, including in vitro ones, without separating individual compounds. It is necessary to be able to identify several substances simultaneously or determine one compound in the presence of chemically similar substances. Modern electrode materials such as PEDOT and nanostructured materials allow for the development of sensors which are getting increasingly better at meeting the requirements of the analysts.

A free-standing, flexible PEDOT:PSS film and its nanocomposites with graphene nanoplatelets as electrodes for quasi-solid-state supercapacitors

Research and development on all-solid-state, flexible supercapacitors is the prime concern of the scientific community these days due to their various advantages including their easy transportability, miniaturization, and compactness in different appliances. We report the novel configuration of all-solid symmetrical supercapacitors employing free-standing, flexible films of poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) (PEDOT:PSS) and its nanocomposite electrodes with graphene nanoplatelets (GNPs), separated by ionic liquid (IL) (1-ethyl 3-methylimidazolium trifluoromethanesulfonate (EMITf))-based gel polymer electrolyte (GPE) films. The free-standing and flexible form of PEDOT:PSS/GNP nanocomposite films have been prepared via simple mixing of the two counterparts. Scanning electron microscopy, x-ray diffraction, Raman analysis, and thermal and mechanical characterizations have been performed to ascertain the suitability of pristine and nanocomposite PEDOT:PSS films as potential supercapacitor electrodes. The GPE film, comprising of a solution of NH₄CF₃SO₃ (NH₄-triflate or NH₄Tf) in IL, entrapped in poly(vinylidine fluoride-co-hexafluoropropylene) (PVdF-HFP), is a promising electrolyte due to its high ionic conductivity and sufficient electrochemical stability window. The supercapacitor with a PEDOT:PSS nanocomposite containing ∼3.8 wt.% of GNP has been found to give an optimum specific capacitance of ∼106 F g^-1 (evaluated from electrochemical impedance spectroscopy), and specific energy and power of ∼6.95 Wh kg^-1 and 2.58 kW kg^-1, respectively (evaluated from galvanostatic charge-discharge). More importantly, the capacitors demonstrate stable performance for more than 2000 charge-discharge cycles, with only ∼10% initial fading in capacitance. Interestingly, the PEDOT:PSS/GNP nanocomposite-based solid-state supercapacitors with the IL-incorporated GPE have shown comparable (even better) performance than other reported PEDOT:PSS-based supercapacitors.

Nanomaterials: Electrochemical Properties and Application in Sensors

The unique properties of nanoparticles make them an extremely valuable modifying material, being used in electrochemical sensors. The features of nanoparticles affect the kinetics and thermodynamics of electrode processes of both nanoparticles and redox reactions occurring on their surface. The paper describes theoretical background and experimental studies of these processes. During the transition from macro- to micro- and nanostructures, the analytical characteristics of sensors modify. These features of metal nanoparticles are related to their size and energy effects, which affects the analytical characteristics of developed sensors. Modification of the macroelectrode with nanoparticles and other nanomaterials reduces the detection limit and improves the degree of sensitivity and selectivity of measurements. The use of nanoparticles as transducers, catalytic constituents, parts of electrochemical sensors for antioxidant detection, adsorbents, analyte transporters, and labels in electrochemical immunosensors and signal-generating elements is described.

Synthesis of Heart/Dumbbell-Like CuO Functional Nanostructures for the Development of Uric Acid Biosensor

It is always demanded to prepare a nanostructured material with prominent functional properties for the development of a new generation of devices. This study is focused on the synthesis of heart/dumbbell-like CuO nanostructures using a low-temperature aqueous chemical growth method with vitamin B₁₂ as a soft template and growth directing agent. CuO nanostructures are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. CuO nanostructures are heart/dumbbell like in shape, exhibit high crystalline quality as demonstrated by XRD, and have no impurity as confirmed by XPS. Apparently, CuO material seems to be porous in structure, which can easily carry large amount of enzyme molecules, thus enhanced performance is shown for the determination of uric acid. The working linear range of the biosensor is 0.001 mM to 10 mM with a detection limit of 0.0005 mM and a sensitivity of 61.88 mV/decade. The presented uric acid biosensor is highly stable, repeatable, and reproducible. The analytical practicality of the proposed uric acid biosensor is also monitored. The fabrication methodology is inexpensive, simple, and scalable, which ensures the capitalization of the developed uric acid biosensor for commercialization. Also, CuO material can be used for various applications such as solar cells, lithium ion batteries, and supercapacitors.

Hydrothermal Synthesis of Nitrogen-Doped Carbon Quantum Dots as Fluorescent Probes for the Detection of Dopamine

Nitrogen-doped carbon quantum dots (N-CQDs) were synthesized though a facile, economical and straightforward hydrothermal method by using polyacrylamide as both carbon and nitrogen sources. The as-prepared N-CQDs offered high quantum yield of 23.1%, exhibited good water solubility and fluorescence properties. Moreover, the N-CQDs can be used as effective probes for sensitive and selective detection of dopamine. Fluorescence of N-CQDs was effectively quenched after the addition of dopamine owing to dopamine would be transformed into dopamine-quinone under alkaline conditions. A good linear relationship between fluorescence quenching and the concentration of dopamine in the range 0.1-200 μM was obtained with a low detection limit of 0.05 μM. The proposed method showed high selectivity for dopamine in the presence of potential interfering species. Moreover, this method was successfully applied to the determination of DA in urine sample with satisfactory recoveries.

Simple strategy for sensitive detection of dopamine using CdTe QDs modified glassy carbon electrode

BACKGROUND

Cellular and brain metabolism of dopamine can be correlated with a number of neurodegenerative disorders, our study was to explore a simple and efficient method to detect dopamine in real samples.

METHODS

A new quantum dots (CdTe QDs) could be prepared using the hydrothermal method, the electrochemical biosensor was established by dropping CdTe QDs on the surface of glassy carbon electrode (GCE).

RESULTS

The CdTe QDs/GCE exhibited the excellent electrochemical catalytic activity toward dopamine (DA) with good stability and high sensitivity in presence of interfering substances. The detection limit of DA was calculated by differential pulse voltammetry (DPV) as low as 0.3 μmol L^-1 with a linear dynamic range of 1 μmol L^-1 to 400 μmol L^-1 .

CONCLUSION

In this paper, the proposed electrochemical biosensor could be effectively used for the direct and rapid detection of DA in human serum and urine samples.

Development of a PrGO-Modified Electrode for Uric Acid Determination in the Presence of Ascorbic Acid by an Electrochemical Technique

An attractive electrochemical sensor of poly(3,4-ethylenedioxythiophene)/reduced graphene oxide electrode (PrGO) was developed for an electrochemical technique for uric acid (UA) detection in the presence of ascorbic acid (AA). PrGO composite film showed an improved electrocatalytic activity towards UA oxidation in pH 6.0 (0.1 M PBS). The PrGO composite exhibited a high current signal and low charge transfer resistance (Rct) compared to a reduced graphene oxide (rGO) electrode or a bare glassy carbon electrode (GCE). The limit of detection and sensitivity of PrGO for the detection of UA are 0.19 μM (S/N = 3) and 0.01 μA/μM, respectively, in the range of 1-300 μM of UA.

Carbon nanodots prepared for dopamine and Al(3+) sensing, cellular imaging and logic gate operation

Fluorescent carbon nanodots (CNDs) were synthesized through a facile, economic and green one-step hydrothermal process. The CNDs exhibit various merits including excellent solubility, superior photostability and low toxicity. Besides, the CNDs can be used as an effective fluorescent probe for dopamine and Al(3+). What's more, this CNDs based fluorescent probe was favorably applied to the analyses of dopamine in biological fluids and Al(3+) in food samples. This CDs based sensing platform shows its potential applications in the field of biology and food analysis with extraordinary advantages such as fast and simple as well as environmental-friendly. Inspired by these results, the prepared CNDs can be utilized as logic gates at the molecular level.

Microwave-assisted preparation of N-doped carbon dots as a biosensor for electrochemical dopamine detection

A new N-doped carbon dots (NCDs) could be prepared by using the microwave-assisted technique within 10 min without the need for any solvent or catalyst. The NCDs exhibited a highly sensitive electrochemical response toward dopamine (DA) in Phosphate Buffered Saline (PBS) (pH=6.5). The detection limit of DA was calculated by differential pulse voltammetry (DPV) as low as 1.2×10(-9) mol/L with a linear dynamic range of 5.0×10(-8) to 8.0×10(-6) mol/L. These results suggested that this new NCDs could be effectively used for the direct and rapid detection of trace levels of DA in human serum and urine samples.

A facile solid-state heating method for preparation of poly(3,4-ethelenedioxythiophene)/ZnO nanocomposite and photocatalytic activity

Poly(3,4-ethylenedioxythiophene)/zinc oxide (PEDOT/ZnO) nanocomposites were prepared by a simple solid-state heating method, in which the content of ZnO was varied from 10 to 20 wt%. The structure and morphology of the composites were characterized by Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) absorption spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM). The photocatalytic activities of the composites were investigated by the degradation of methylene blue (MB) dye in aqueous medium under UV light and natural sunlight irradiation. The FTIR, UV-vis, and XRD results showed that the composites were successfully synthesized, and there was a strong interaction between PEDOT and nano-ZnO. The TEM results suggested that the composites were a mixture of shale-like PEDOT and less aggregated nano-ZnO. The photocatalytic activity results indicated that the incorporation of ZnO nanoparticles in composites can enhance the photocatalytic efficiency of the composites under both UV light and natural sunlight irradiation, and the highest photocatalytic efficiency under UV light (98.7%) and natural sunlight (96.6%) after 5 h occurred in the PEDOT/15wt%ZnO nanocomposite.

Nonenzymatic amperometric sensor for ascorbic acid based on hollow gold/ruthenium nanoshells

We report a new nonenzymatic amperometric detection of ascorbic acid (AA) using a glassy carbon (GC) disk electrode modified with hollow gold/ruthenium (hAu-Ru) nanoshells, which exhibited decent sensing characteristics. The hAu-Ru nanoshells were prepared by the incorporation of Ru on hollow gold (hAu) nanoshells from Co nanoparticle templates, which enabled AA selectivity against glucose without aid of enzyme or membrane. The structure and electrocatalytic activities of the hAu-Ru catalysts were characterized by spectroscopic and electrochemical techniques. The hAu-Ru loaded on GC electrode (hAu-Ru/GC) showed sensitivity of 426 μA mM(-1) cm(-2) (normalized to the GC disk area) for the linear dynamic range of <5 μM to 2 mM AA at physiological pH. The response time and detection limit were 1.6 s and 2.2 μM, respectively. Furthermore, the hAu-Ru/GC electrode displayed remarkable selectivity for ascorbic acid over all potential biological interferents, including glucose, uric acid (UA), dopamine (DA), 4-acetamidophenol (AP), and nicotinamide adenine dinucleotide (NADH), which could be especially good for biological sensing.

Polythiophenes and polythiophene-based composites in amperometric sensing

This overview of polythiophene-based materials provides a critical examination of meaningful examples of applications of similar electrode materials in electroanalysis. The advantages arising from the use of polythiophene derivatives in such an applicative context is discussed by considering the organic conductive material as such, and as one of the components of hybrid materials. The rationale at the basis of the combination of two or even more individual components into a hybrid material is discussed with reference to the active electrode processes and the consequent possible improvements of the electroanalytical performance. In this respect, study cases are presented considering different analytes chosen among those that are most frequently reported within the classes of organics and inorganics. The use of a polythiophene matrix to stably fix biological elements at the electrode surface for the development of catalytic biosensors and genosensors is also discussed. Finally, a few possible lines along which the next research in the field could be fruitfully pursued are outlined. Furthermore, the work still to be done to exploit the possibilities offered by novel products of organic synthesis, even along paths already traced in other fields of electrochemistry, is discussed.