Comparative in vitro evaluation of microspherical embolisation agents

Comparing Deposition Characteristics of Various Embolic Particles Using an In Vitro Prostate Microvasculature Model

PURPOSE

To compare spatial distributions of radiopaque glass (RG) microspheres, tris-acryl gelatin (TAG) microspheres, and polyvinyl alcohol (PVA) nonspherical foam particles within a planar in vitro microvascular model of the hyperplastic hemiprostate.

MATERIALS AND METHODS

A microvascular model simulating hyperplastic hemiprostate was perfused with a water-glycerin mixture. A microcatheter was positioned distal to the model's prostatic artery origin, and embolic particles (RG, 50 μm, 100 μm, and 150 μm; TAG, 100-300 μm and 300-500 μm; and PVA, 90-180 μm and 180-300 μm) were administered using a syringe pump. Microscopic imaging and subsequent semantic segmentation were performed to quantify particle distributions within the models. Distal penetrations were quantified statistically via modal analysis of the particle distributions.

RESULTS

Maximum distal penetration was observed for RG microspheres of 50 μm, followed by RG microspheres of 100 μm and then TAG microspheres of 100-300 μm and RG microspheres of 150 μm. TAG microspheres of 300-500 μm, PVA particles of 90-180 μm, and PVA particles of 180-300 μm exhibited the lowest distal penetrations. The distal penetration metrics between groups were significantly different (P < .05) except between TAG microspheres of 100-300 μm and RG microspheres of 150 μm and between PVA particles of 90-180 and 180-300 μm.

CONCLUSIONS

Comparing the spatial distributions of embolic particles in an in vitro microvascular model simulating the hyperplastic hemiprostate revealed that noncompressible particles and those with narrower size calibrations and smaller relative diameters exhibited higher degrees of distal packing. The embolization front was less distinct for particles with wider size calibrations, which resulted in smaller, more distal emboli along with larger, more proximal emboli. Both PVA particles and TAG microspheres of 300-500 μm exhibited relatively low overall distal penetration.

A Comparative Study of DC Beads, Callispheres and Multimodal Imaging Nano-Assembled Microspheres Loaded with Irinotecan in Vitro

Introduction: In recent years, the development of drug-eluting embolization beads that can be imaged has become a hot research topic in regard to meeting clinical needs. In our previous study, we successfully developed nano-assembled microspheres (NAMs) for multimodal imaging purposes. NAMs can not only be visualized under CT/MR/Raman imaging but can also load clinically required doses of doxorubicin. It is important to systematically compare the pharmacokinetics of NAMs with those of commercially available DC Beads and CalliSpheres to evaluate the clinical application potential of NAMs. Methods: In our study, we compared NAMs with two types of drug-eluting beads (DEBs) in terms of irinotecan, drug-loading capacity, release profiles, microsphere diameter variation, and morphological characteristics. Results: Our results indicate that NAMs had an irinotecan loading capacity similar to those of DC Beads and CalliSpheres but exhibited better sustained release in vitro. Conclusion: NAMs have great potential for application in transcatheter arterial chemoembolization for the treatment of colorectal cancer liver metastases.

Long-Term Middle Meningeal Artery Caliber Reduction Following Trisacryl Gelatine Microsphere Embolization for the Treatment of Chronic Subdural Hematoma

PURPOSE

Middle meningeal artery (MMA) particle embolization is a promising treatment of chronic subdural hematomas (CSDH). The main purpose of this study is to measure MMA proximal caliber and assess the visibility of the two main MMA branches as a surrogate for long-term distal arterial patency following MMA CSDH embolization with trisacryl gelatine microspheres (TAGM).

METHODS

This is a single-center retrospective study. All patients having undergone MMA TAGM only embolization for CSDH treatment between 15 March 2018 and 6 June 2020 with an interpretable follow-up magnetic resonance imaging (MRI) examination and no confounding factors were included. Patients were compared with controls matched for age, sex and MRI machine. Two independent readers analyzed the MRI images.

RESULTS

In this study, 30 patients having undergone embolization procedures using TAGM of 36 MMAs were included. The follow-up MRI scans were performed after a mean delay of 14.8 ± 7.1 months (range 4.9-29.4 months). The mean diameter of TAGM embolized MMAs (1 mm; 95% confidence interval, CI 0.9-1.1) was significantly smaller than the mean diameter of paired control MMAs (1.3 mm; 95% CI 1.3-1.4) (p < 0.001). The mean proximal diameter of the embolized MMAs (0.9 mm; 95% CI 0.7-1.1) was significantly smaller than the mean diameter of the contralateral MMAs in the same patients (1.4 mm; 95% CI 1.3-1.6)(p < 0.001).

CONCLUSION

Long-term follow-up MRI demonstrated a significant impact of TAGM embolization on MMA proximal caliber as well as on the visibility of the two main MMA branches. All comparisons indicated that there was a probable lasting impact of embolization on the patency of distal branches.

Silk-elastinlike protein-based hydrogels for drug delivery and embolization

Silk-Elastinlike Protein-Based Polymers (SELPs) can form thermoresponsive hydrogels that allow for the generation of in-situ drug delivery matrices. They are produced by recombinant techniques, enabling exact control of monomer sequence and polymer length. In aqueous solutions SELP strands form physical crosslinks as a function of temperature increase without the addition of crosslinking agents. Gelation kinetics, modulus of elasticity, pore size, drug release, biorecognition, and biodegradation of SELP hydrogels can be controlled by placement of amino acid residues at strategic locations in the polymer backbone. SELP hydrogels have been investigated for delivery of a variety of bioactive agents including small molecular weight drugs and fluorescent probes, oligomers of glycosaminoglycans, polymeric macromolecules, proteins, plasmid DNA, and viral gene delivery systems. In this review we provide a background for use of SELPs in matrix-mediated delivery and summarize recent investigations of SELP hydrogels for controlled delivery of bioactive agents as well as their use as liquid embolics.

Embolization therapy with microspheres for the treatment of liver cancer: State-of-the-art of clinical translation

Embolization with microspheres is a therapeutic strategy based on the selective occlusion of the blood vessels feeding a tumor. This procedure is intraarterially performed in the clinical setting for the treatment of liver cancer. The practice has evolved over the last decade through the incorporation of drug loading ability, biodegradability and imageability with the subsequent added functionality for the physicians and improved clinical outcomes for the patients. This review highlights the evolution of the embolization systems developed through the analysis of the marketed embolic microspheres for the treatment of malignant hepatocellular carcinoma, namely the most predominant form of liver cancer. Embolic microspheres for the distinct modalities of embolization (i.e., bland embolization, chemoembolization and radioembolization) are here comprehensively compiled with emphasis on material characteristics and their impact on microsphere performance. Moreover, the future application of the embolics under clinical investigation is discussed along with the scientific and regulatory challenges ahead in the field. STATEMENT OF SIGNIFICANCE: Embolization therapy with microspheres is currently used in the clinical setting for the treatment of most liver cancer conditions. The progressive development of added functionalities on embolic microspheres (such as biodegradability, imageability or drug and radiopharmaceutical loading capability) provides further benefit to patients and widens the therapeutic armamentarium for physicians towards truly personalized therapies. Therefore, it is important to analyze the possibilities that advanced biomaterials offer in the field from a clinical translational perspective to outline the future trends in therapeutic embolization.

Particle Distribution in Embolotherapy, How Do They Get There? A Critical Review of the Factors Affecting Arterial Distribution of Embolic Particles

Embolization has tremendously evolved in recent years and has expanded to treatment of a variety of pathologic processes. There has been emerging evidence that the level of arterial occlusion and the distribution of embolic particles may play an important role in the clinical outcome. This is a comprehensive literature review to identify variables that play important role in determination of level of occlusion of blood vessels and distribution of embolic particles. The literature searches between 1996 to 2020 through PubMed and Ovid-MEDLINE yielded over 1030 articles of which 30 studies providing details on the level of occlusion are reviewed here. We divided the playing factors into characteristics of the particles, solution/injection and vascular bed. Accordingly, particle size, type and aggregation, compressibility/deformability, and biodegradability are categorized as the factors involving particles' behavioral nature. Infusion rate and concentration/dilution of the medium are related to the carrying solution. Hemodynamics and the arterial resistance are characteristics of the vascular bed that also play an important role in the distribution of embolic particles. Understanding and predicting the level of embolization is a complex multi-factor problem that requires more evidence, warranting further randomized controlled trials, and powered human and animal studies.

Surgical management of auricular arteriovenous malformations: A literature review

Auricular arteriovenous malformations (AVMs) can cause a variety of symptoms that seriously impact the patient's appearance, life, and mental well‐being. Surgery is the primary management method for auricular AVMs, but there is no consensus on how to surgically manage auricular AVMs. In this article, we document a comprehensive review of the characteristics, classification, and surgical interventions to treat auricular AVMs.

Prevention of Microsphere Blockage in Catheter Tubes Using Convex Air Bubbles

This paper presents a novel method to prevent blockages by embolic microspheres in catheter channels by using convex air bubbles attached to the channels' inner wall surface. The clogging by microspheres can occur by the arching of the microspheres in the catheter. A few studies have been done on reducing the blockage, but their methods are not suitable for use with embolic catheters. In this study, straight catheter channels were fabricated. They had cavities to form convex air bubbles; additionally, a straight channel without the cavities was designed for comparison. Blockage was observed in the straight channel without the cavities, and the blockage arching angle was measured to be 70°, while no blockage occurred in the cavity channel with air bubbles, even at a geometrical arching angle of 85°. The convex air bubbles have an important role in preventing blockages by microspheres. The slip effect on the air bubble surface and the centrifugal effect make the microspheres drift away from the channel wall. It was observed that as the size of the cavity was increased, the drift distance became larger. Additionally, as more convex air bubbles were formed, the amount of early drift to the center increased. It will be advantageous to design a catheter with large cavities that have a small interval between them.

On-demand degradable embolic microspheres for immediate restoration of blood flow during image-guided embolization procedures

Degradable embolic agents that provide transient arterial occlusion during embolization procedures have been of interest for many years. Ideally, embolic agents are visible with standard imaging modalities and offer on-demand degradability, permitting physicians to achieve desired arterial occlusion tailored to patient and procedure indication. Subsequent arterial recanalization potentially enhances the overall safety and efficacy of embolization procedures. Here, we report on-demand degradable and MRI-visible microspheres for embolotherapy. Embolic microspheres composed of calcium alginate and USPIO nanoclusters were synthesized with an air spray atomization and coagulation reservoir equipped with a vacuum suction. An optimized distance between spray nozzle and reservoir allowed uniform size and narrow size distribution of microspheres. The fabricated alginate embolic microspheres crosslinked with Ca²⁺ demonstrated highly responsive on-demand degradation properties in vitro and in vivo. Finally, the feasibility of using the microspheres for clinical embolization and recanalization procedures was evaluated with interventional radiologists in rabbits. Digital subtraction angiography (DSA) guided embolization of hepatic arteries with these embolic microspheres was successfully performed and the occlusion of artery was confirmed with DSA images and contrast enhanced MRI. T2 MRI visibility of the microspheres allowed to monitor the distribution of intra-arterial (IA) infused embolic microspheres. Subsequent on-demand image-guided recanalization procedures were also successfully performed with rapid degradation of microspheres upon intra-arterial infusion of an ion chelating agent. These instant degradable embolic microspheres will permit effective on-demand embolization/recanalization procedures offering great promise to overcome limitations of currently available permanent and biodegradable embolic agents.

Transarterial embolization of the external carotid artery in the treatment of life-threatening haemorrhage following blunt maxillofacial trauma

Background

Severe bleeding after blunt maxillofacial trauma is a rare but life-threatening event. Non-responders to conventional treatment options with surgically inaccessible bleeding points can be treated by transarterial embolization (TAE) of the external carotid artery (ECA) or its branches. Case series on such embolizations are small; considering the relatively high incidence of maxillofacial trauma, the ECA TAE procedure has been hypothesized either underused or underreported. In addition, the literature on the ECA TAE using novel non-adhesive liquid embolization agents is remarkably scarce.

Patients and methods

PubMed review was performed to identify the ECA TAE literature in the context of blunt maxillofacial trauma. If available, the location of the ECA injury, the location of embolization, the chosen embolization agent, and efficacy and safety of the TAE were noted for each case. Survival prognostic factors were also reviewed. Additionally, we present an illustrative TAE case using a precipitating hydrophobic injectable liquid (PHIL) to safely and effectively control a massive bleeding originating bilaterally in the ECA territories.

Results and conclusions

Based on a review of 205 cases, the efficacy of TAE was 79.4–100%, while the rate of major complications was about 2–4%. Successful TAE haemostasis, Glasgow Coma Scale score ≥ 8 at presentation, injury severity score ≤ 32, shock index ≤ 1.1 before TAE and ≤ 0.8 after TAE were significantly correlated with higher survival rate. PHIL allowed for fast yet punctilious application, thus saving invaluable time in life-threatening situations while simultaneously diminishing the possibility of inadvertent injection into the ECA-internal carotid artery (ICA) anastomoses.

In Vitro Characterization of a Novel Type of Radiopaque Doxorubicin-Loaded Microsphere

PURPOSE

To evaluate and compare the material characteristics of a novel type of radiopaque doxorubicin-loaded microsphere (V-100) with radiopaque and non-radiopaque doxorubicin-loaded microspheres.

MATERIALS AND METHODS

The prototype V-100 featuring inherent radiopacity and three available commercial controls (DC-Bead-LUMI™-70-150, Embozene-Tandem™-100 and DC-Bead™-M1) were analyzed before and after doxorubicin loading (37.5 mg doxorubicin/1 ml microspheres) in suspension with aqua and/or aqua/iodixanol-320. Study goals included inherent radiopacity [e.g., using conventional computed tomography (CT)], doxorubicin loading efficacy, morphology using light and fluorescence microscopy, size distribution using laser diffraction/light scattering, time-in-suspension, rheological properties using rheometer analysis, and microsphere stability observed over a period of 5 days after doxorubicin loading.

RESULTS

V-100 showed good inherent radiopacity without adverse imaging artifacts. Under conventional CT, the quantitative radiopacity was as follows: 480.4 ± 2.9HU for V-100, 2432.7 ± 3.2HU for DC-Bead-LUMI™-70-150, 118.1 ± 3.0HU for Embozene-Tandem™-100, and 19.8 ± 1.5HU for DC-Bead™-M1. All of the types of microspheres showed a similar loading efficiency (> 98%) after 24 h; however, there were slower doxorubicin loading velocities for the radiopaque microspheres. The doxorubicin-loaded V-100 and Embozene-Tandem™-100 showed typical narrow-sized distributions. In aqua/iodixanol-320 suspension, doxorubicin-loaded V-100 showed the best suspension features and ideal deformability and elasticity characteristics. Similar to other microspheres, doxorubicin-loaded V-100 was very stable and storable for at least 5 days.

CONCLUSION

V-100 is a promising novel type of radiopaque doxorubicin-loaded microsphere. Compared with the controls, V-100 shows good inherent radiopacity without adverse imaging artifacts and with comparable doxorubicin loading efficacy. Further advantages of V-100 include narrow-sized distribution and excellent suspension, rheology, and stability features.

Advances in Biomaterials and Technologies for Vascular Embolization

Minimally invasive transcatheter embolization is a common nonsurgical procedure in interventional radiology used for the deliberate occlusion of blood vessels for the treatment of diseased or injured vasculature. A wide variety of embolic agents including metallic coils, calibrated microspheres, and liquids are available for clinical practice. Additionally, advances in biomaterials, such as shape-memory foams, biodegradable polymers, and in situ gelling solutions have led to the development of novel preclinical embolic agents. The aim here is to provide a comprehensive overview of current and emerging technologies in endovascular embolization with respect to devices, materials, mechanisms, and design guidelines. Limitations and challenges in embolic materials are also discussed to promote advancement in the field.

An In Vitro Evaluation of Four Types of Drug-Eluting Embolics Loaded with Idarubicin

PURPOSE

This study compared loading, elution, and stability of drug-eluting embolic beads (DEBs) loaded with idarubicin.

MATERIALS AND METHODS

DC Bead (100-300 μm), HepaSphere (30-60 μm), LifePearl (200 μm), and Tandem (100 μm) DEBs were loaded with 5 mg/mL idarubicin. Loading, elution, diameter changes, loading stability over 2 weeks in storage, and time in suspension were determined for each of the DEBs.

RESULTS

Loading of more than 99% of idarubicin was achieved within 15 minutes for LifePearl, DC Bead, and Tandem beads. LifePearl, DC Bead, HepaSphere, and Tandem beads eluted 75% of the total idarubicin released in 13, 24, 42, and 91 minutes, respectively. In vitro elution was completed in 2 hours with 73% ± 3%, 74% ± 3%, 65% ± 6%, and 7% ± 0% of the loaded idarubicin eluted for LifePearl, DC Bead, HepaSphere, and Tandem, respectively. Statistically significant differences were observed at every time point between at least 2 of the products. Overall, in vitro idarubicin elution was rapid and nearly complete for LifePearl, DC Bead, and HepaSphere beads but was minimal and slow from Tandem beads. The average diameter of DEBs after loading was reduced by 5% for LifePearl, whereas it was increased by 9% and 1% for DC Bead and Tandem, respectively. After loading, time in suspension was 11 ± 4 and 10 ± 2 minutes for LifePearl and HepaSphere, respectively, whereas DC Bead and Tandem beads were held in suspension for greater than 20 minutes.

CONCLUSIONS

Although all 4 DEBs loaded idarubicin within 15 minutes with minimal changes in diameter, the elution amounts, rates of release, and time in suspension varied.

Comparison of the Efficacy of Two Microsphere Embolic Agents for Transcatheter Arterial Chemoembolization in Hepatocellular Carcinoma Patients

Purpose

Transarterial chemoembolization (TACE) delivers cytotoxic drugs intra-arterially and induces ischemic necrosis by arterial embolization. Embolization is achieved using a variety of agents that differ widely in particle size and range, deformation, and in vivo arterial distribution. The clinical significance of these differences has not been thoroughly characterized. The present study is to compare the efficacy of Embosphere and Embozene microspheres in TACE therapy for hepatocellular carcinoma.

Materials and Methods

This retrospective study includes 108 hepatocellular carcinoma (HCC) patients who received TACE/doxorubicin with Embozene (70 patients) or Embosphere (38 patients) at a single medical center. Patient outcomes, including liver function, tumor size, tumor response, and complications after treatment, were analyzed. The change in total target lesion size and tumor response was evaluated according to embolization agent and clinical characteristics.

Results

The postoperative glutamate oxaloacetate transaminase (mean, 194.5 vs. 147.5; p=0.032) and bilirubin (mean, 1.11 mg/dL vs. 0.73 mg/dL; p=0.016) were higher among patients treated with Embozene, the decrease in the number (55.86±25.55% vs. 41.81±38.51%, p=0.027) and size (56.37±25.91 mm vs. 43.44±37.89 mm, p=0.001) of liver tumors relative to baseline was greater in these patients than in those treated with Embosphere. These greater antitumor effects were achieved using lower doses of doxorubicin than for treatment with Embozene. Minor complications were more common among patients treated with Embosphere than with Embozene.

Conclusion

These results suggest that Embozene is more efficacious than Embosphere for HCC treatment using TACE/doxorubicin.

Thermo-sensitive composite hydrogels based on poloxamer 407 and alginate and their therapeutic effect in embolization in rabbit VX2 liver tumors

Interventional embolization therapy is an effective, most widely used method for inoperable liver tumors. Blood-vessel-embolic agents were essential in transarterial embolization (TAE). In this work, thermo-sensitive composite hydrogels based on poloxamer 407, sodium alginate, hydroxymethyl cellulose and iodixanol (PSHI), together with Ca2+ (PSHI-Ca2+) were prepared as liquid embolic agents for TAE therapy to liver cancer. With increasing temperature, PSHI exhibited two phase states: a flowing sol and a shrunken gel. Rheology tests showed good fluidity and excellent viscoelastic behavior with a gelation temperature (GT) of 26.5°C. The studies of erosion indicated that PSHI had calcium ion-related erosion characteristics and showed a slow erosion rate in an aqueous environment. When incubated with L929 cells, the thermo-sensitive composite hydrogels had low cytotoxicity in vitro. The results of analyzing the digital subtraction angiography and computed tomography images obtained from in vitro and in vivo assays indicated a good embolic effect in the renal arteries of normal rabbits. Angiography and histological studies on VX2 tumor-bearing rabbits indicated that PSHI-Ca2+ successfully occluded the tumors, including the peripheral vessels. In conclusion, PSHI-Ca2+ was a promising embolic agent for transarterial embolization therapy.

Comparison of microsphere penetration with LC Bead LUMI™ versus other commercial microspheres

The purpose of this study was to evaluate LC Bead LUMI™ (40-90µm and 70-150µm) in order to determine if their increased resistance to compression influences microsphere penetration and distribution compared to more compressible commercial microspheres. LC Bead LUMI™ 40-90µm and 70-150µm, LC BeadM1^® 70-150µm, Embozene™ 40µm and Embozene™ 100µm size and distributions were measured using optical microscopy. Penetration in vitro was evaluated using an established 'plate model', consisting of a calibrated tapered gap between a glass plate and plastic housing to allow visual observation of microsphere penetration depth. Behaviour in vivo was assessed using a rabbit renal embolization model with histopathologic confirmation of vessel penetration depth. Penetration behaviour in vitro was reproducible and commensurate with the measured microsphere size, the smaller the microsphere the deeper the penetration. Comparison of the microsphere diameter measured on the 2D plate model versus the corresponding average microsphere size measured by histopathology in the kidney showed no significant differences (p = > 0.05 Mann-Whitney, demonstrating good in vitro - in vivo predictive capabilities of the plate model) confirming predictable performance for LC Bead LUMI™ (40-90µm and 70-150µm) based on microsphere size, their increased rigidity having no bearing on their depth of penetration and distribution. An assessment of a LC Bead LUMI™ (40-90µm and 70-150µm) has shown that despite having greater resistance to compression, these microspheres behave in a predictable manner within in vitro and in vivo models comparable with more compressible microspheres of similar sizes.

Tissue sublimation follow transarterial embolization of a follicular nodular hyperplasia of the liver-report of a case

Background

Follicular nodular hyperplasia (FNH) is a common benign liver tumor for which conservative management is indicated. Surgical or interventional management is indicated in symptomatic cases. Transarterial embolization (TAE) has been extensively used to manage unresectable liver tumors. Sublimation describes a change of physical state from solid to gas. Hepatic tissue sublimation following TAE has so far not been reported in medical literature.

Case presentation

A 30 year - old male patient presenting with pain to the upper abdomen due to a large FNH was managed with TAE. Routine radiographic control on post-intervention day one was within normal limits. Imaging due to right upper quadrant pain with fever and elevated inflammatory markers and liver enzymes on day two after TAE revealed a marked reduction of the FNH accompanied by the presence of a large volume of gas collection without signs of abscess formation. This change of state from solid to gas without sign of abscess formation within 2 days after TAE was described as hepatic tissue sublimation. The patient was managed conservatively and discharge 12 days after TAE.

Conclusion

Tissue sublimation has hardly been reported in medical literature. This to the best of our knowledge is the first documented case of hepatic tissue sublimation following TAE.

Drug-eluting embolic microspheres for local drug delivery - State of the art

Embolic microspheres or beads used in transarterial chemoembolization are an established treatment method for hepatocellular carcinoma patients. The occlusion of the tumor-feeding vessels by intra-arterial injection of the beads results in tumor necrosis and shrinkage. In this short review, we describe the utility of using these beads as devices for local drug delivery. We review the latest advances in the development of non-biodegradable and biodegradable drug-eluting beads for transarterial chemoembolization. Their capability to load different drugs, such as chemotherapeutics and anti-angiogenic compounds with different physicochemical properties, like charge and hydrophilicity/hydrophobicity, are discussed. We specifically address controlled and sustained drug release from the microspheres, and the resulting in vivo pharmacokinetics in the plasma vs. drug distribution in the targeted tissue.

Endovascular Embolization by Transcatheter Delivery of Particles: Past, Present, and Future

Minimally invasive techniques to occlude flow within blood vessels, initially pioneered in the 1970s with autologous materials and subsequently advanced with increasingly sophisticated engineered biomaterials, are routinely performed for a variety of medical conditions. Contemporary interventional radiologists have at their disposal a wide armamentarium of occlusive agents to treat a range of disease processes through a small incision in the skin. In this review, we provide a historical perspective on endovascular embolization tools, summarize the current state-of-the-art, and highlight burgeoning technologies that promise to advance the field in the near future.

In situ forming biodegradable poly(ε-caprolactone) microsphere systems: a challenge for transarterial embolization therapy. In vitro and preliminary ex vivo studies

BACKGROUND

In situ forming biodegradable poly(ε-caprolactone) (PCL) microspheres (PCL-ISM) system was developed as a novel embolic agent for transarterial embolization (TAE) therapy of hepatocellular carcinoma (HCC). Ibuprofen sodium (Ibu-Na) was loaded on this platform to evaluate its potential for the treatment of post embolization syndrome.

METHODS

The influence of formulation parameters on the size/shape, encapsulation efficiency and drug release was investigated using mixture experimental design. Regression models were derived and used to optimize the formulation for particle size, encapsulation efficiency and drug release profile for TAE therapy. An ex vivo model using isolated rat livers was established to assess the in situ formation of microspheres.

RESULTS

All PCL-ISM components affected the studied properties and fitting indices of the regression models were high (Radj² = 0.810 for size, 0.964 encapsulation efficiency, and 0.993 or 0.971 for drug release at 30 min or 48 h). The optimized composition was: PCL = 4%, NMP = 43.1%, oil = 48.9%, surfactant = 2% and drug = 2%. Ex vivo studies revealed that PCL-ISM was able to form microspheres in the hepatic arterial bed.

CONCLUSIONS

PCL-ISM system provides a novel tool for the treatment of HCC and post-embolization syndrome. It is capable of forming microspheres with desirable size and Ibu-Na release profile after injection into blood vessels.

Polymeric materials for embolic and chemoembolic applications

Percutaneous transcatheter embolization procedures involve the selective occlusion of blood vessels. Occlusive agents, referred to as embolics, vary in material characteristics including chemical composition, mechanical properties, and the ability to concurrently deliver drugs. Commercially available polymeric embolics range from gelatin foam to synthetic polymers such as poly(vinyl alcohol). Current systems under investigation include tunable, bioresorbable microspheres composed of chitosan or poly(ethylene glycol) derivatives, in situ gelling liquid embolics with improved safety profiles, and radiopaque embolics that are trackable in vivo. This article reviews commercially available materials used for embolization as well as polymeric materials that are under investigation.

Use of the 2.8 French Progreat microcatheter in diagnostic cerebral angiography

BACKGROUND

Tortuous vascular anatomy poses a significant challenge to performing diagnostic cerebral angiography.

OBJECTIVE

To report a new cerebral angiography technique for overcoming tortuous aortic and supra-aortic anatomy using a 2.8 French (F) Progreat microcatheter (0.028 inch (internal diameter) (Terumo; Somerset, New Jersey, USA) to obtain a diagnostic cerebral angiogram.

MATERIALS AND METHODS

A retrospective analysis of consecutive cases undergoing diagnostic cerebral angiography at our institution between 1 January 2013 and 30 November 2015 in which a 2.8F Progreat microcatheter was used. Clinical and operative notes were reviewed and correlated with imaging. Radiologic imaging, including CT, MRI, and digital subtraction angiography, was reviewed. Neurologic, systemic, and local complications were recorded on the basis of clinical follow-up results after each angiographic examination. Events that occurred within 24 h of the angiography were considered to be complications of the procedure.

RESULTS

Initial attempts at catheterization of the target vessel with various 4F and 5F catheters were unsuccessful owing to tortuosity, atherosclerotic disease, or occlusion of the catheter in the target vessel. Microcatheterization of the target vessel was successful in 59/62 (95%) target vessels. A diagnostic cerebral angiogram with a power injection was obtained in 59 (100%) of the successfully catheterized vessels. In one case, angiography proceeded to aneurysm coiling after over-the-wire exchange. In two cases, angiography proceeded to mechanical thrombectomy after over-the-wire exchange. No procedural complications were seen.

CONCLUSIONS

The 2.8F Progreat microcatheter can be used to obtain a diagnostic cerebral angiogram in patients with anatomic challenges limiting catheterization by standard techniques.

Preparation and evaluation of biocompatible long-term radiopaque microspheres based on polyvinyl alcohol and lipiodol for embolization

The aim of this work was to develop long-term radiopaque microspheres (LRMs) by entrapping lipiodol in biocompatible polyvinyl alcohol with multiple emulsions chemical crosslinking method. The high content of lipiodol (0.366 g/mL) was hardly released from LRMs in vitro and the radiopacity could maintain at least 3 months after subcutaneous injection in mice without weakening. A series of tests was performed to evaluate the feasibility of LRMs for embolization. LRMs were proved to be smooth, spherical, and well dispersed with diameter range of 100–1200 μm. Young's modulus of LRMs was 55.39 ± 9.10 kPa and LRMs could be easily delivered through catheter without aggregating or clogging. No toxicity of LRMs was found to mouse L929 fibroblasts cells and only moderate inflammatory in surrounding tissue of mice was found after subcutaneous injection of LRMs. After LRMs were embolized in renal artery of a rabbit, the distribution and radiopacity of LRMs in vivo were easily detectable by X-ray fluoroscopy and computed tomography (CT) imaging, respectively. More accurate distribution of LRMs in embolized kidney and vessels could be detected by high-revolution visualization of micro-CT ex vivo. In conclusion, the LRMs were proved to be biocompatible and provide long-term radiopacity with good physical and mechanical properties for embolization.

Endoluminal occlusion devices: technology update

Endoluminal occlusion has been performed since the early beginning of interventional radiology. Over recent decades, major technological advances have improved the techniques used and different devices have been developed for changing conditions. Most of these occlusion devices have been implemented in the vascular territory. Early embolization materials included glass particles, hot contrast, paraffin, fibrin, and tissue fragments such as muscle fibers and blood clots; today, occlusion materials include metallic devices, particles, and liquid materials, which can be indicated for proximal or distal occlusion, high-flow and low-flow situations, and in large-caliber and small-caliber vessels, based on need. Technological progress has led to a decreased size of delivery catheters, and an increase in safety due to release systems that permit the withdrawing and replacement of embolization material. Furthermore, bioactive embolization materials have been developed to increase the efficacy of embolization or the biological effect of medication. Finally, materials have been modified for changing indications. Intravascular stents were initially developed to keep an artery open; however, by adding a covering membrane, these stents can be used to occlude the wall of a vessel or other endoluminal structures. This article gives an overview of the devices most utilized for occlusion of endoluminal structures, as well as their major purpose in the endovascular territory.

Comparison of polyvinyl alcohol microspheres and tris-acryl gelatin microspheres for uterine fibroid embolization: results of a single-center randomized study

PURPOSE

To assess the efficacy of two embolic agents in the treatment of symptomatic uterine leiomyomas.

MATERIALS AND METHODS

A randomized, prospective, single-center study enrolled 60 women with symptomatic uterine leiomyomas. Uterine artery embolization (UAE) with spherical polyvinyl alcohol (SPVA) microspheres (n = 30; 700-900 μm and 900-1,200 μm; near-stasis or stasis endpoint) and tris-acryl gelatin (TAG) microspheres (n = 30; 500-700 μm; "pruned-tree" endpoint) was performed. Infarction rates were calculated for the dominant tumor and for small (< 2 cm) and large (> 2 cm) nondominant tumors. The primary endpoint was tumor infarction at 24 hours measured by contrast-enhanced magnetic resonance imaging assessed by a blinded reviewer.

RESULTS

Baseline characteristics were similar between groups. The primary endpoint was similar in both treatments (≥ 91% dominant tumor infarction; SPVA. 86.2%; TAG, 93.3%, P = .35). Complete infarction (100%) was also similar between arms at 24 hours and 3 months. Symptom severity was reduced and quality of life improved equally at 3 and 12 months in each treatment group. Complications were minor in both groups.

CONCLUSIONS

Uterine leiomyoma infarction at 24 hours and 3 months after treatment with SPVA or TAG microspheres was comparable when using near-stasis as a procedural endpoint with SPVA microspheres. Symptom relief was maintained for as long as 12 months for both embolic agents.

Pattern of retained contrast on immediate postprocedure computed tomography (CT) after particle embolization of liver tumors predicts subsequent treatment response

PURPOSE

To determine if the pattern of retained contrast on immediate postprocedure computed tomography (CT) after particle embolization of hepatic tumors predicts modified Response Evaluation Criteria in Solid Tumors (mRECIST) response.

MATERIALS AND METHODS

This study was approved by the Institutional Review Board with a waiver of authorization. One hundred four liver tumors were embolized with spherical embolic agents (Embospheres, Bead Block, LC Bead) and polyvinyl alcohol. Noncontrast CT was performed immediately after embolization to assess contrast retention in the targeted tumors, and treatment response was assessed by mRECIST criteria on follow-up CT (average time 9.0 ± 7.7 weeks after embolization). Tumor contrast retention (TCR) was determined based on change in Hounsfield units (HUs) of the index tumors between the preprocedure and immediate postprocedure scans; vascular contrast retention (VCR) was rated; and defects in contrast retention (DCR) were also documented. The morphology of residual enhancing tumor on follow-up CT was described as partial, circumferential, or total. Association between TCR variables and tumor response were assessed using multivariate logistic regression.

RESULTS

Of 104 hepatic tumors, 51 (49%) tumors had complete response (CR) by mRECIST criteria; 23 (22.1%) had partial response (PR); 21 (20.2%) had stable disease (SD); and 9 (8.7%) had progressive disease (PD). By multivariate analysis, TCR, VCR, and tumor size are independent predictors of CR (p = 0.02, 0.05, and 0.005 respectively). In 75 tumors, DCR was found to be an independent predictor of failure to achieve complete response (p < 0.0001) by imaging criteria.

CONCLUSION

TCR, VCR, and DCR on immediate posttreatment CT are independent predictors of CR by mRECIST criteria.

A microfluidic device for the characterisation of embolisation with polyvinyl alcohol beads through biomimetic bifurcations

A microfluidic based device has been developed for the characterisation of embolisation behaviour with polyvinyl alcohol (PVA) hydrogel beads within a microchannel network with bifurcations which mimic the blood vessel network. Both distal and proximal embolisations were achieved within the PMMA-made microdevice exhibiting comparable embolisation characteristics with those observed in vivo. Results showed that small beads allowed more distal embolisations with a reduced control of the spatial location of occlusion sites. In contrast, large beads generated effective proximal embolisations with an improved reproducibility of embolisation performance. Embolic bead hydrodynamics, partitioning at bifurcations, penetration through microchannels and embolisation locations across the channel network were characterised by quantifying the effects of embolic bead size, bead concentration, channel geometry and fluidic conditions. This development provided further insights into the physical principles governing embolisation performances within the constructed microdevices allowing the improvement of the predictability and controllability of the clinical process outcomes. Furthermore, it can potentially provide a useful platform for preclinical research as an alternative to animal models, with an ultimate goal to reduce the amount of animal testing.

Preparation and characterization of ketoprofen-loaded microspheres for embolization

To deliver drug locally and relieve the syndrome of pain after uterine artery embolization, N-[tris (hydroxymethyl) methyl] acrylamide-gelatin microspheres were prepared based on inverse suspension polymerization and then separated into a number of subgroups (150-350, 350-560, 560-710, 710-1,000, and 1,000-1,430 μm) by wet-sieving. The microspheres were dried by lyophilization or by washing with anhydrous ethanol. And ketoprofen was loaded by soaking dried blank microspheres into concentrated ketoprofen ethanol solution. The ketoprofen loading level in different subgroups of microspheres was measured and found higher when the microspheres were dried by lyophilization. Equilibrium water content and mean diameters of microspheres decreased after drug loading, especially in subgroups with larger size. The microspheres went through the catheter without any difficulty. Compression and relaxation tests were performed on microspheres before lyophilization, embosphere™, microspheres after lyophilization and ketoprofen loading microspheres. The Young's moduli were 54.74, 64.19, 98.15, and 120.44 kPa, respectively. The release of ketoprofen from microspheres in different subgroups was studied by using the USPII method and T-cell apparatus, respectively. The results indicate that the release rate of ketoprofen depends upon the diameter of microspheres, the type of dissolution apparatus and the flow rate of media in the case that T-cell apparatus was applied. The CH50 test shows that the activation of complement by ketoprofen-loaded microspheres was lower than by blank ones.

Comparison of clinical outcomes of tris-acryl microspheres versus polyvinyl alcohol microspheres for uterine artery embolization for leiomyomas: results of a randomized trial

PURPOSE

To compare tris-acryl microspheres and polyvinyl alcohol (PVA) microspheres as embolic agents in uterine artery embolization (UAE) for uterine leiomyomas in terms of clinical outcome, inflammatory response, and adverse reactions.

MATERIALS AND METHODS

A double-blinded randomized controlled trial was performed, with 27 patients in the tris-acryl microsphere group and 29 in the PVA microsphere group. The primary endpoint was clinical success, defined as a 2-year freedom from subsequent surgery as a result of persistent or deteriorated symptoms. Secondary endpoints included (i) posttreatment leiomyoma enlargement, (ii) leiomyoma volume reduction at 3 and 9 months, (iii) significant residual intratumoral perfusion, (iv) increase in inflammatory and stress markers, (v) incidence of complications, and (vi) duration of hospital stay.

RESULTS

There was no statistically significant difference between the two groups in patient demographics, clinical presentation, initial tumor findings, change in inflammatory and stress markers after treatment, incidence of complications, and duration of hospital stay. Tris-acryl microspheres were associated with a higher rate of clinical success than PVA microspheres (96.3% [26 of 27] vs 69% [20 of 29]; P = .012), a lower incidence of posttreatment leiomyoma enlargement (P = .030), and a lower incidence of significant residual intratumoral perfusion (P = .030).

CONCLUSIONS

In the treatment of uterine leiomyomas, UAE with tris-acryl microspheres was associated with a higher clinical success rate, a lower incidence of tumor enlargement, and no significant differences in adverse reactions and inflammatory response compared with the use of PVA microspheres. Tris-acryl microspheres therefore represent the preferred agent for UAE of uterine leiomyomas.

Anti-tumour effects of transcatheter arterial embolisation administered in combination with thalidomide in a rabbit VX2 liver tumour model

OBJECTIVE

Using a liver tumour model we investigated whether thalidomide enhances the anti-tumour effect of transcatheter arterial embolisation (TAE).

METHOD

First, the viability of VX2 tumour cells co-cultured with thalidomide in a 21% and 1% O(2) atmosphere was assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Second, we randomly assigned 20 rabbits bearing VX2 liver tumours to 4 groups: Group 1 (thalidomide plus TAE), Group 2 (TAE only), Group 3 (thalidomide only) and Group 4 (control). Thalidomide was orally administered for 5 days. The anti-tumour effects were assessed by the tumour proliferation rate using MRI and by immunohistochemical analysis of the area of intratumoural vessels. Analysis of variance and Tukey's honestly significant difference test were used for statistical analysis.

RESULTS

The viability of cells grown under hypoxic and normal conditions was not significantly different, nor was there a difference among the four groups. The tumour size increased by 55.9±29.3% in Group 1, 250.6±73.3% in Group 2, 355.2±51.7% in Group 3 and 424.7±110.7% in Group 4; the difference between Group 1 and the other three groups was significant. The area of intratumour vessels in specimens was 0.22±0.28% in Group 1, 0.42±0.29% in Group 2, 1.44±1.00% in Group 3 and 6.00±2.17% in Group 4; the difference between Group 1 and the other groups was statistically significant, as was the difference between Groups 3 and 4.

CONCLUSION

Thalidomide used in combination with TAE enhanced anti-tumour effects in rabbits bearing VX2 liver tumours.

Development of "imageable" beads for transcatheter embolotherapy

PURPOSE

To develop and characterize radiopaque embolization microspheres capable of in vivo detection with intraprocedural fluoroscopy and computed tomography (CT) imaging and to evaluate their spatial distribution inside target tissues during and after transcatheter embolization.

MATERIALS AND METHODS

Polyvinyl alcohol hydrogel microspheres were loaded with Lipiodol and examined for iodine content, stability of loading, and conspicuity with fluoroscopy and CT in vitro. Transcatheter embolization of swine liver and kidney was performed with the radiopaque microspheres and spatial distribution was evaluated with intraprocedural fluoroscopy and CT. Ex vivo evaluation was performed with light microscopy and micro-CT.

RESULTS

In vitro analyses demonstrated that radiopaque microspheres could be loaded with sufficient iodine content to be detected with routine fluoroscopy and CT imaging and that such loading was relatively stable. Radiopaque microspheres were visible in vivo with fluoroscopy and CT during transcatheter embolization. CT imaging during embolization procedures demonstrated a dose-dependent relationship in the number and size of visualized embolized arteries. Imaging features of radiopaque microsphere distribution inside target tissues correlated well with ex vivo light microscopic and micro-CT evaluation of microsphere distribution.

CONCLUSIONS

Radiopaque embolization microspheres are visualized during transcatheter embolization with routine intraprocedural fluoroscopy and CT. These radiopaque microspheres provided the three-dimensional spatial distribution of embolic material inside target organs during the procedure, and therefore can provide real-time intraprocedural feedback for the interventional radiologist. These microspheres may be useful for demonstrating the influence of material and technical variability in transcatheter embolization in addition to providing intraprocedural identification of tissue at risk of undertreatment.

Characterisation of physico-mechanical properties and degradation potential of calcium alginate beads for use in embolisation

High molecular weight alginate beads with 59% mannuronic acid content or 68% guluronic acid were prepared using a droplet generator and crosslinked in calcium chloride. The alginate beads were compared to current embolisation microspheres for compressibility and monitored over 12 weeks for size and weight change at 37 degrees C in low volumes of ringers solutions. A sheep uterine model was used to analyse bead degradation and inflammatory response over 12 weeks. Both the in vitro and in vivo data show good delivery, with a compressibility similar to current embolic beads. In vitro, swelling was noted almost immediately and after 12 weeks the first signs of degradation were noted. No difference was noted in vivo. This study has shown that high molecular weight alginate gel beads were well tolerated by the body, but beads associated with induced thrombi were susceptible to inflammatory cell infiltration. The beads were shown to be easy to handle and were still observable after 3 months in vivo. The beads were robust enough to be delivered through a 2.7 Fr microcatheter. This study has demonstrated that high molecular weight, high purity alginate bead can be considered as semi-permanent embolisation beads, with the potential to bioresorb over time.

Arterial distribution of calibrated tris-acryl gelatin and polyvinyl alcohol embolization microspheres in sheep uterus

The purpose of this study was to compare, after embolization, the distribution in the uterine arterial vasculature of tris-acryl gelatin microspheres (TGMS) and polyvinyl alcohol microspheres (PVAMS). A limited bilateral uterine artery embolization was performed in six adult sheep under fluoroscopic control by injecting in each uterine artery 0.25 ml of 500- to 700-microm TGMS of PVAMS suspended in 50/50 saline/contrast medium. Sacrifices were performed 1 week after embolization and uteri were analyzed histologically. The number and size of microspheres and vessels were measured, as well as the histological location according to a classification in four zones of the uterus. One hundred sixty-five vessels (69 vessels occluded with TGMS and 96 vessels occluded with PVAMS) were measured. The size of the occluded vessels decreased significantly from proximal to distal zones of the uterine vasculature (P < 0.0001). The location of TGMS and PVAMS within the vasculature was significantly different (P < 0.0001) since PVAMS blocked significantly more distally than TGMS. Deformation of the microspheres within the tissue was greater for PVAMS (18.0% +/- 12.3%) than for TGMS (8.7% +/- 9.2%) (P < 0.0001). In conclusion, PVAMS have a more distal distribution in the sheep uterine vasculature, compared to TGMS. Such differences in partition, already described in the kidney embolization model, can ultimately explain the different clinical outcome reported with these two types of microspheres in uterine fibroid embolization.

Arterial distribution characteristics of Embozene particles and comparison with other spherical embolic agents in the porcine acute embolization model

PURPOSE

To determine the arterial distribution pattern of the embolic agent Embozene within the porcine kidney and compare it with those of other spherical embolic agents.

MATERIALS AND METHODS

Embozene, Embosphere, Bead Block, and Contour SE in size classes of 100-300 microm, 500-700 microm, and 700-900 microm and Embozene and Embosphere in the size class of 40-120 microm were used for total arterial occlusion in minipig kidneys. Organs were evaluated microscopically regarding vascular distribution of the different embolic agents and particle sizes.

RESULTS

The following variations of arterial distribution were identified. In the 40-120-microm size class, Embosphere particles penetrated significantly deeper compared with Embozene (P = .04). In the 100-300-microm size class, Bead Block showed a significantly deeper distribution as microscopy identified particles in arteries much smaller than their nominal size. In the 500-700-microm size class, Embosphere and Contour SE showed a deeper distribution. The most uniform arterial distribution was observed in the 700-900 microm size class,. However, few Embosphere and Contour SE particles were found in arcuate arteries, also indicating a distal distribution.

CONCLUSIONS

Throughout the four most-used size classes, from very small (40-120 microm) to large (700-900 microm), the distribution characteristics of the four tested materials vary substantially. Particularly, small Embosphere particles and small Bead Block particles showed a more distal distribution, as did medium-sized Embosphere and Contour SE particles. In the largest investigated size class, the distribution was more uniform. In general, the Embozene particles are very uniform in size, and they seem to reach vessels closely corresponding to their nominal size.