Stereological analysis of the poly-(DL-lactide-co-glycolide) submicron sphere prepared by solvent/non-solvent chemical methods and centrifugal processing

Chitosan nanobeads loaded with Biginelli hybrids as cell-selective toxicity systems with a homogeneous distribution of the cell cycle in cancer treatment

Tetrahydropyrimidines are a class of azaheterocycles, also called Biginelli hybrids (obtained from the Biginelli reaction), that have attracted an enormous interest in the medicinal chemistry community in recent years, due to a broad biological activity, such as anticancer, antiviral, anti-inflammatory, antidiabetic, antituberculosis activities, etc. According to SciFinder®, more than 70 000 different Biginelli-like compounds have been covered in publications. However, although the Biginelli reaction can yield a large number of compounds with a broad range of activities, none of them have been captured in a carrier. In this study, chitosan-based (Ch) nanoparticles (NPs) containing three different molecules (Biginelli hybrids) were developed and tested for the first time as simple and promising vehicles for anticancer Biginelli-based drugs. The key features of NPs, such as size, surface morphology, drug encapsulation efficiency, and in vitro release were systematically investigated. Rather weak cell selectivity of pure Biginelli hybrids (A–C) to selected cancer cell lines has improved and this has been accompanied with two-to-four times stronger cytotoxic effect of A–C loaded Ch NPs, with a triple reduction in toxicity to healthy cells (MRC-5). It has been observed that the examined NPs induce apoptosis. The cell cycle analysis has confirmed the influence of A-loaded Ch (A-Ch), B-loaded Ch (B-Ch), and C-loaded Ch (C-Ch) on the cell cycle distribution, which was homogenously affected. This is the difference with regard to the effect of A, B, and C on the cell cycle. It has been established that the increased selectivity and antitumor activity of NPs are related to the presence of the carrier.

Chitosan nanoparticles containing tetrahydropyrimidines were developed and tested for the first time as simple and promising vehicles for anticancer Biginelli-based drugs.

Chitosan Oligosaccharide Lactate Coated Hydroxyapatite Nanoparticles as a Vehicle for the Delivery of Steroid Drugs and the Targeting of Breast Cancer Cells

Low targeting efficiency and fast metabolism of antineoplastic drugs are hindrances to effective chemotherapies and there is an ongoing search for better drugs, but also better carriers. Steroid derivatives, 3β-hydroxy-16-hydroxymino-androst-5-en-17-one (A) and 3β,17β-dihydroxy-16-hydroxymino-androst-5-ene (B) as cancer growth inhibitors were chemically synthesized and captured in a carrier composed of hydroxyapatite (HAp) nanoparticles coated with chitosan oligosaccharide lactate (ChOLS). The only difference between the two derivatives is that A has a carbonyl group at the C17 position of the five-membered ring and B has a hydroxyl. This small difference in the structure resulted not only in different physicochemical properties of the A- and B-loaded HAp/ChOSL, but also in different biological activities. The morphology of drug-loaded HAp/ChOSL particles was spherical, but the size depended on the drug identity: d50=138 nm for A-loaded HAp/ChOSL and d50=223 nm for B-loaded HAp/ChOSL. Cell-selective toxicity was tested against human breast carcinoma (MCF7 and MDA-MB-231), human lung carcinoma (A549) and human lung fibroblasts (MRC-5). The small selectivity of pure derivatives A and B toward breast cancer cells became drastically increased when they were delivered using HAp/ChOSL particles. Whereas the ratio of the cytotoxicity imposed onto breast cancer cells and the cytotoxicity imposed onto healthy MRC-5 fibroblasts ranged from 1.5 to 1.7 for pure A and from 1.5 to 2.3 for pure derivative B depending on the concentration, it increased to 5.4 for A-loaded HAp/ChOSL and 5.1 for B-loaded HAp/ChOSL. FACS analysis demonstrated poor uptake of HAp/ChOSL particles by MCF7 cells, suggesting that the drug release occurs extracellularly. The augmented activity of the drugs was most likely due to sustained release, although the favorable positive charge of the carrier, allowing it to adhere to the negatively charged plasma membrane and release the drugs steadily and directly to the hydrophobic cell membrane milieu, was delineated as a possible complementary mechanism.

PLGA: a unique polymer for drug delivery

Biodegradable polymers have played an important role in the delivery of drugs in a controlled and targeted manner. Polylactic-co-glycolic acid (PLGA) is one of the extensively researched synthetic biodegradable polymers due to its favorable properties. It is also known as a ‘Smart Polymer’ due to its stimuli sensitive behavior. A wide range of PLGA-based drug delivery systems have been reported for the treatment or diagnosis of various diseases and disorders. The present review provides an overview of the chemistry, physicochemical properties, biodegradation behavior, evaluation parameters and applications of PLGA in drug delivery. Different drug–polymer combinations developed into drug delivery or carrier systems are enumerated and discussed.

Preparation and characterization of poly(D,L-lactide-co-glycolide) nanoparticles containing ascorbic acid

This paper is covering new, simplistic method of obtaining the system for controlled delivery of the ascorbic acid. Copolymer poly (D,L-lactide-co-glycolide) (DLPLG) nanoparticles are produced using physical method with solvent/nonsolvent systems where obtained solutions were centrifuged. The encapsulation of the ascorbic acid in the polymer matrix is performed by homogenization of water and organic phases. Particles of the DLPLG with the different content of ascorbic acid have different morphological characteristics, that is, variable degree of uniformity, agglomeration, sizes, and spherical shaping. Mean sizes of nanoparticles, which contain DLPLG/ascorbic acid in the ratio 85/150%, were between 130 to 200 nm depending on which stereological parameters are considered (maximal diameters Dmax, feret X, or feret Y). By introducing up to 15% of ascorbic acid, the spherical shape, size, and uniformity of DLPLG particles are preserved. The samples were characterized by infrared spectroscopy, scanning electron microscopy, stereological analysis, and ultraviolet spectroscopy.

Morphological changes of poly(DI-lactide-co-glycolide) nano-particles containing ascorbic acid during in vitro degradation process

Poly(DL-lactide-co-glycolide) powder composed of uniform particles with the mean particle size in the range of 110-170 nm was obtained from commercial granules. Ascorbic acid in different concentrations was encapsulated into the poly(DL-lactide-co-glycolide) particles. Degradation of the latter in terms of morphological changes in the physiological solution was followed. Within a period of 2 months, the particles completely degrade and all the ascorbic acid is released. The samples were characterized by ultraviolet spectroscopy and scanning electron microscopy.

Preparation of smallest microparticles of poly-D,L-lactide by modified precipitation method: influence of the process parameters

Biodegradable microspheres such as those made of poly-D,L-lactide (PDLLA) are widely investigated delivery systems for drugs or antigens. The aim of this study was to examine experimental conditions in order to produce PDLLA microspheres with the best properties for controlled and sustained drug delivery by the modified precipitation method. For this purpose, the following parameters were varied: co-solvent (methanol or ethanol), the concentration of stabilizer polyvinyl alcohol (PVA), chloroform-to-water ratio and the speed and time of homogenization. Scanning electron microscopy (SEM) and stereological analysis were used to characterize the particles. The average size and morphology of the microspheres varied substantially with preparation conditions from 8.44-1.25 microm. Results showed that the smallest particles were obtained with methanol, 1% PVA and with 10 min of homogenization at 21,000 rpm.

Fabrication, in vitro degradation and the release behaviours of poly(DL-lactide-co-glycolide) nanospheres containing ascorbic acid

Ascorbic acid (vitamin C) is essential for preserving optimal health and is used by the body for many purposes. The problem is that ascorbic acid easily decomposes into biologically inactive compounds making its use very limited in the field of pharmaceuticals, dermatological and cosmetics. By encapsulating the ascorbic acid into a polymer matrix it is assumed that its chemical instability can be overcome as well as higher, more efficient and equally distributed concentration throughout extended period of time can be achieved. This paper is describing the process of obtaining poly(dl-lactide-co-glycolide) (DLPLG) nanospheres (110-170 nm) using chemical method with solvent/non-solvent systems where obtained solutions have been centrifuged. The encapsulation of the ascorbic acid in the polymer matrix is performed by homogenisation of water and organic phases. Nanoparticles of the copolymer DLPLG with the different contents of the ascorbic acid have different morphological characteristics, i.e. variable degree of uniformity, agglomeration, sizes and spherical shaping. The degradation of the nanospheres of DLPLG, DLPLG/ascorbic acid nanoparticles and release rate of the ascorbic acid were studied for 8 weeks in a physiological solution (0.9% sodium chloride in water). The samples have been characterised by infrared spectroscopy (IR), scanning electron microscopy (SEM), stereological analysis and ultraviolet (UV) spectroscopy.