Silicon-hydroxyapatite bioactive coatings (Si-HA) from diatomaceous earth and silica. Study of adhesion and proliferation of osteoblast-like cells

Diatom-guided bone healing via a hybrid natural scaffold

Bone tissue engineering (BTE) involves the design of three-dimensional (3D) scaffolds that aim to address current challenges of bone defect healing, such as limited donor availability, disease transmission risks, and the necessity for multiple invasive surgeries. Scaffolds can mimic natural bone structure to accelerate the mechanisms involved in the healing process. Herein, a crosslinked combination of biopolymers, including gelatin (GEL), chitosan (CS), and hyaluronic acid (HA), loaded with diatom (Di) and β-sitosterol (BS), is used to produce GCH-Di-S scaffold by freeze-drying method. The GCH scaffold possesses a uniform structure, is biodegradable and biocompatible, and exhibits high porosity and interconnected pores, all required for effective bone repair. The incorporation of Di within the scaffold contributes to the adjustment of porosity and degradation, as well as effectively enhancing the mechanical property and biomineralization. In vivo studies have confirmed the safety of the scaffold and its potential to stimulate the creation of new bone tissue. This is achieved by providing an osteoconductive platform for cell attachment, prompting calcification, and augmenting the proliferation of osteoblasts, which further contributes to angiogenesis and anti-inflammatory effects of BS.

The Influence of Nanosilica on Properties of Cement Based on Tetracalcium Phosphate/Monetite Mixture with Addition of Magnesium Pyrophoshate

The effect of nanosilica on the microstructure setting process of tetracalcium phosphate/nanomonetite calcium phosphate cement mixture (CPC) with the addition of 5 wt% of magnesium pyrophosphate (assigned as CT5MP) and osteogenic differentiation of mesenchymal stem cells cultured in cement extracts were studied. A more compact microstructure was observed in CT5MP cement with 0.5 wt% addition of nanosilica (CT5MP1Si) due to the synergistic effect of Mg₂P₂O₇ particles, which strengthened the cement matrix and nanosilica, which supported gradual growth and recrystallization of HAP particles to form compact agglomerates. The addition of 0.5 wt% of nanosilica to CT5MP cement caused an increase in CS from 18 to 24 MPa while the setting time increased almost twofold. It was verified that adding nanosilica to CPC cement, even in a low amount (0.5 and 1 wt% of nanosilica), positively affected the injectability of cement pastes and differentiation of cells with upregulation of osteogenic markers in cells cultured in cement extracts. Results revealed appropriate properties of these types of cement for filling bone defects.

Biomineralized Composite Liquid Crystal Fiber Scaffold Promotes Bone Regeneration by Enhancement of Osteogenesis and Angiogenesis

Liquid crystals (LCs) are appealing biomaterials for applications in bone regenerative medicine due to their tunable physical properties and anisotropic viscoelastic behavior. This study reports a novel composite poly (L-lactide) (PLLA) scaffold that is manufactured by a simple electrospinning and biomineralization technique that precisely controls the fibrous structure in liquid LC phase. The enriched-LC composites have superior mineralization ability than neat PLLA; furthermore BMSC cells were inoculated onto the HAP-PLLA/LC with hydroxyapatite (HAP) composite scaffold to test the capability for osteogenesis in vitro. The results show that the PLLA/LC with HAP produced by mineralization leads to better cell compatibility, which is beneficial to cell proliferation, osteogenic differentiation, and expression of the angiogenic CD31 gene. Moreover, in vivo studies showed that the HAP-PLLA/LC scaffold with a bone-like environment significantly accelerates new and mature lamellar bone formation by development of a microenvironment for vascularized bone regeneration. Thus, this bionic composite scaffold in an LC state combining osteogenesis with vascularized activities is a promising biomaterial for bone regeneration in defective areas.

Substituted Hydroxyapatite, Glass, and Glass-Ceramic Thin Films Deposited by Nanosecond Pulsed Laser Deposition (PLD) for Biomedical Applications: A Systematic Review

The deposition of thin films of bioactive materials is the most common approach to improve the bone bonding ability of an implant surface. With this purpose, several wet and plasma assisted deposition methods were proposed in the scientific literature. In this review, we considered films obtained by nanosecond Pulsed Laser Deposition (PLD). Since hydroxyapatite (HA) has composition and structure similar to that of the mineral component of the bone, the initial studies focused on the selection of experimental conditions that would allow the deposition of films that retain HA stoichiometry and crystallinity. However, biological apatite was found to be a poorly crystalline and multi-substituted mineral; consequently, the attention of researchers was oriented towards the deposition of substituted HA, glass (BG), and glass-ceramic (BGC) bioactive materials to exploit the biological relevance of foreign ions and crystallinity. In this work, after a description of the nanosecond ablation and film growth of ceramic materials, we reported studies on the mechanism of HA ablation and deposition, evidencing the peculiarities of PLD. The literature concerning the PLD of ion substituted HA, BG, and BGC was then reviewed and the performances of the coatings were discussed. We concluded by describing the advantages, limitations, and perspectives of PLD for biomedical applications.

Rapid structural regulation, apatite-inducing mechanism and in vivo investigation of microwave-assisted hydrothermally treated titania coating

Owing to the poor bioactivity of microarc oxidation (MAO) coating and the rapid activation ability of the microwave hydrothermal (MH) technique, MH treatment was applied to optimize the in vivo interface status between MAO-treated titanium and bone. In this study, consequently, new outermost layers were prepared using hydroxyapatite (HA) nanorods, HA submicron pillars or sodium titanate nanosheets. The results revealed that the NaOH concentration significantly influenced the surface structure and phase constitution of the MAO samples. Moreover, on enhancing the NaOH concentration, the number of HA phases was decreased. Further, the influence of the NaOH concentration on the interfacial bonding strength was insignificant for concentrations ≤0.5 mol L⁻¹. Transmission electron microscopy (TEM) analysis showed that the induction of apatite was accompanied by the dissolution of the HA crystals and there was excellent crystallographic matching with the HA crystals. The in vitro and in vivo analyses revealed that the MH-treated MAO sample with the HA nanorods possessed superior apatite-formation ability and osseointegration, including a small amount of soft tissue and optimal bone–implant interfacial bonding force, thus signifying strong potential for the optimization of the bone–implant interfacial status.

In this work, the micro/nano scale structures of HA nanorods integrated on a titanium were prepared using MAO and MH treatment. The in vivo results indicate that HA crystals play a crucial role in the improvement of the osseointegration.

Preparation and characterization of diatomite and hydroxyapatite reinforced porous polyurethane foam biocomposites

Porous three-dimensional (3D) polyurethane-based biocomposites were produced utilizing diatomite and hydroxyapatite as fillers. Diatomite and Hydroxyapatite (HA) were utilized to reinforce the morphological, chemical, mechanical, and thermal properties of polyurethane foam (PUF). Diatomite and Hydroxyapatite were added into polyurethane at variable percentages 0, 1, 2, and 5. The mechanical properties of PUF were analyzed by the compression test. According to the compression test results, the compressive strength of the polyurethane foam is highest in the reinforced foam at 1% by weight hydroxyapatite compared to other reinforced PUFs. Scanning electron microscopy (SEM) images presented structural differences on foam by adding fillers. Functional groups of PUF were defined by Fourier Transform Infrared Spectroscopy (FTIR) and the thermal behavior of PUF was studied with Thermogravimetric Analysis (TGA). The obtained results revealed that PUF/HA biocomposites indicated higher thermal degradation than PUF/Diatomite biocomposites.

Effect of doping different Si source on Ca-P bioceramic coating fabricated by laser cladding

The doping of silicon (Si) has been proved to improve the bioactivity of Ca-P ceramics. In light of this thinking, in the present study, Ca-P coatings with La₂O₃ by addition of 10 wt% SiO₂ and 10 wt% diatomaceous earth (DE) were fabricated by laser cladding on Ti6Al4V, respectively. Coating doped without Si was also fabricated as the comparison group for the experiment. The effect of two different Si sources on the surface morphology, microstructure, microhardness, and bioactivity was systematically studied. The experimental results show that the Si-doped coating is of rough surface morphology, and the addition of DE significantly reduces the number of cracks and improves the microhardness. The X-ray diffraction results reveal that the amount of bioactive phase tricalcium-phosphate (TCP) and hydroxyapatite (HA) reaches maximum in the DE-doped coating. After soaking in simulated body fluid (SBF), the precipitate of bone-like apatite in the DE-doped coating is significantly higher than that of the other coatings.

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium

A high-performance multilayer coating with external, flexible, and silicon-doped hydroxyapatite (Si-HA) nanorods was designed using bionics. Plasma electrolytic oxidation (PEO) and the microwave hydrothermal (MH) method were used to rapidly deposit this multilayer coating on a titanium (Ti) substrate, applied for 5 and 10 min, respectively. The bioactive multilayer coating was composed of four layers, and the outermost layer was an external growth layer that consisted of many Si-HA nanorods with a single-crystal structure. The Si-HA nanorods exhibited good flexibility, likely because of their complete single-crystal structures, smooth surfaces, and suitable diameters and lengths. This multilayer coating with a high surface energy was superhydrophilic and exhibited good in vitro bioactivities, such as good apatite formation ability, good cell spreading, and high osteogenic gene expression levels. After implantation in the tibia of rabbits for 16 weeks, almost no soft tissues were formed at the MH treated PEO implant-bone interface. A direct bone contact interface was formed by a bridging effect of the flexible Si-HA nanorods, which further produced a high implant-bone interface bonding strength. The current results demonstrated that the bioactive multilayer layers with the flexible Si-HA nanorods displayed a very good osseointegration ability, showing promising applications in the biomedical field.

Comparative study of hydroxyapatite, fluor-hydroxyapatite and Si-substituted hydroxyapatite nanoparticles on osteogenic, osteoclastic and antibacterial ability

This study compared the effects of hydroxyapatite (HA), fluor-hydroxyapatite (FHA) and Si-substituted hydroxyapatite (SiHA) on osteogenic differentiation, osteoclastic activity and antibacterial properties. HA, FHA and SiHA were prepared via a sol-gel reaction and characterized by scanning electron microscopic analysis (SEM), transmission electron microscopic analysis (TEM), and X-ray photoelectron spectrometry. Cell proliferation was evaluated using an MTT assay and cytoskeletal morphology was observed by fluorescence microscopy. Osteogenic differentiation was evaluated using alkaline phosphatase activity and Alizarin red staining. Quantitative real-time PCR was used to evaluate the mRNA expression of runt-related transcription factor 2 (Runx2) and osteopontin (OPN). New bone formation was tested using μCT, haematoxylin and eosin staining and TRAP staining. The antibacterial actions against Porphyromonas gingivalis (P. g) were evaluated through plate counting and live-dead bacterial staining. The results demonstrated that HA, FHA and SiHA can promote proliferation of bone mesenchymal stem cells (BMSCs). ALP activity in FHA extract with a concentration of 625 μg mL-1 was the highest after 14 days osteogenic induction; similar results were observed for Runx2 and OPN mRNA expression. HA, FHA and SiHA decreased trabecular space in bone defects, but FHA reduced osteoclastic activity and inhibited P. g growth. In conclusion, FHA can promote osteogenic activity, reduce osteoclastic activity and enhance antibacterial effects.

Bioactive diatomite and POSS silica cage reinforced chitosan/Na-carboxymethyl cellulose polyelectrolyte scaffolds for hard tissue regeneration

Recently, natural polymers are reinforced with silica particles for hard tissue engineering applications to induce bone regeneration. In this study, as two novel bioactive agents, effects of diatomite and polyhedral oligomeric silsesquioxanes (POSS) on chitosan (CS)/Na-carboxymethylcellulose (Na-CMC) polymer blend scaffolds are examined. In addition, the effect of silica reinforcements was compared with Si-substituted nano-hydroxyapatite (Si-Hap) particles. The morphology, physical and chemical structures of the scaffolds were characterized with SEM, liquid displacement, FT-IR, mechanical analysis, swelling and degradation studies. The particle size and the crystal structure of diatomite, POSS and Si-Hap particles were determined with DLS and XRD analyses. In vitro studies were performed to figure out the cytotoxicity, proliferation, ALP activity, osteocalcin production and biomineralization to demonstrate the promising use of natural silica particles in bone regeneration. Freeze-dried scaffolds showed 190-307 μm pore size range and 61-70% porosity. Both inorganic reinforcements increased the mechanical strength, enhanced the water uptake capacity and fastened the degradation rate. The nanocomposite scaffolds did not show any cytotoxic effect and enhanced the surface mineralization in osteogenic medium. Thus, diatomite and POSS cage structures can be potential reinforcements for nanocomposite design in hard tissue engineering applications.

Biotemplated Synthesis and Characterization of Mesoporous Nitric Oxide-Releasing Diatomaceous Earth Silica Particles

Diatomaceous earth (DE), a nanoporous silica material composed of fossilized unicellular marine algae, possesses unique mechanical, molecular transport, optical, and photonic properties exploited across an array of biomedical applications. The utility of DE in these applications stands to be enhanced through the incorporation of nitric oxide (NO) technology shown to modulate essential physiological processes. In this work, the preparation and characterization of a biotemplated diatomaceous earth-based nitric oxide delivery scaffold are described for the first time. Three aminosilanes [(3-aminopropyl)triethoxysilane (APTES), N-(6-aminohexyl)aminomethyltriethoxysilane (AHAMTES), and 3-aminopropyldimethylethoxysilane (APDMES)] were evaluated for their ability to maximize NO loading via the covalent attachment of N-acetyl-d-penicillamine (NAP) to diatomaceous earth. The use of APTES cross-linker resulted in maximal NAP tethering to the DE surface, and NAP-DE was converted to NO-releasing S-nitroso-N-acetyl-penicillamine (SNAP)-DE by nitrosation. The total NO loading of SNAP-DE was determined by chemiluminescence to be 0.0372 ± 0.00791 μmol/mg. Retention of diatomaceous earth's unique mesoporous morphology throughout the derivatization was confirmed by scanning electron microscopy. SNAP-DE exhibited 92.95% killing efficiency against Gram-positive bacteria Staphylococcus aureus as compared to the control. The WST-8-based cytotoxicity testing showed no negative impact on mouse fibroblast cells, demonstrating the biocompatible potential of SNAP-DE. The development of NO releasing diatomaceous earth presents a unique means of delivering tunable levels of NO to materials across the fields of polymer chemistry, tissue engineering, drug delivery, and wound healing.

Exploratory Testing of Diatom Silica to Map the Role of Material Attributes on Cell Fate

Porous silica is an attractive biomaterial in many applications, including drug-delivery systems, bone-graft fillers and medical devices. The issue with porous silica biomaterials is the rate at which they resorb and the significant role played by interfacial chemistry on the host response in vivo. This paper explores the potential of diatom-biosilica as a model tool to assist in the task of mapping and quantifying the role of surface topography and chemical cues on cell fate. Diatoms are unicellular microalgae whose cell walls are composed of, amorphous nanopatterned biosilica that cannot be replicated synthetically. Their unique nanotopography has the potential to improve understanding of interface reactions between materials and cells. This study used Cyclotella meneghiniana as a test subject to assess cytotoxicity and pro-inflammatory reactions to diatom-biosilica. The results suggest that diatom-biosilica is non-cytotoxic to J774.2 macrophage cells, and supports cell proliferation and growth. The addition of amine and thiol linkers have shown a significant effect on cytotoxicity, growth and cytokine response, thus warranting further investigation into the interfacial effects of small chemical modifications to substrate surfaces. The overall findings suggest diatom-biosilica offers a unique platform for in-depth investigation of the role played by nanotopography and chemistry in biomedical applications.

The improved biological response of shark tooth bioapatites in a comparative in vitro study with synthetic and bovine bone grafts

Autologous bone is considered to be the gold standard for bone tissue regeneration, providing more highly efficient functional responses compared to synthetic materials, and avoiding the rejection risks of allogenic grafts. However, it presents limitations for certain types of surgery due to its high resorption levels and donor site morbidity. Different biphasic synthetic composites, based onnon-apatitic calcium phosphates enriched with apatitic phases-such as hydroxyapatite, and bioderived bone grafts of bovine and porcine origin-are proposed as lower resorption materials due to their higher crystalline structure. The present work proposes two new sources of bioapatites for bone filler applications obtained from the dentine and enameloid of shark teeth, respectively. These bioapatites each present a characteristic apatite-based composition and additional enrichments of specific trace elements, such as magnesium and fluorine, with proven roles in bone metabolism. Their processing and physicochemical characterization (SEM, FT-Raman and XRD) is presented, together with an in vitro evaluation of osteogenic activity compared to a commercial bovine mineralized matrix and synthetic HA/β TCP grafts. The results proved the globular morphology (0.5-1.5 μm) and porosity (~50 μm and ~0.5-1 μm) of shark dentine bioapatites with biphasic composition: apatitic (hydroxyapatite and apatite-(CaF)), non-apatitic (whitlockite), and an apatitic phase (fluorapatite), organized in oriented crystals in enameloid bioapatites. An evaluation of the pre-osteoblast MC3T3-E1 morphology revealed the colonization of pores in dentine bioapatites and an aligned cell growth in the oriented enameloid crystals. A higher proliferation (p  <  0.01) was detected at up to 21 d in both the shark bioapatites and synthetic biphasic graft with respect to the bovine mineralized matrix. Finally, the great potential of porous biphasic dentine bioapatites enriched with Mg and the aligned fluorapatite crystals of enameloid bioapatites in promoting greater osteogenic activity was confirmed with a significantly increased ALP synthesis (p  <  0.01) compared to the commercial grafts.

Structural Properties and Antifungal Activity against Candida albicans Biofilm of Different Composite Layers Based on Ag/Zn Doped Hydroxyapatite-Polydimethylsiloxanes

Modern medicine is still struggling to find new and more effective methods for fighting off viruses, bacteria and fungi. Among the most dangerous and at times life-threatening fungi is Candida albicans. Our work is focused on surface and structural characterization of hydroxyapatite, silver doped hydroxyapatite and zinc doped hydroxyapatite deposited on a titanium substrate previously coated with polydimethylsiloxane (HAp-PDMS, Ag:HAp-PDMS, Zn:HAp-PDMS) by different techniques: Scanning Electron Microscopy (SEM), Glow Discharge Optical Emission Spectroscopy (GDOES) and Fourier Transform Infrared Spectroscopy (FTIR). The morphological studies revealed that the use of the PDMS polymer as an interlayer improves the quality of the coatings. The structural characterizations of the thin films revealed the basic constituents of both apatitic and PDMS structure. In addition, the GD depth profiles indicated the formation of a composite material as well as the successful embedding of the HAp, Zn:HAp and Ag:HAp into the polymer. On the other hand, in vitro evaluation of the antifungal properties of Ag:HAp-PDMS and Zn:HAp-PDMS demonstrated the fungicidal effects of Ag:HAp-PDMS and the potential antifungal effect of Zn:HAp-PDMS composite layers against C. albicans biofilm. The results acquired in this research complete previous research on the potential use of new complex materials produced by nanotechnology in biomedicine.

Silicon effect on the composition and structure of nanocalcium phosphates: In vitro biocompatibility to human osteoblasts

Nanostructured calcium phosphates, such as nanohydroxyapatite (HAP) and HAP with silicon content (HAP-Si) of 0.47wt.% (1% SiO2), 2.34wt.% (5% SiO2) and 4.67wt.% (10% SiO2) in the final product, were synthesized by aqueous precipitation, freeze dried and then calcined at 650, 950 and 1150°C. The obtained materials were investigated by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrometry, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and atomic force microscopy (AFM) imaging. From the analysis of the XRD patterns, the HAP and β-tricalcium phosphate (β-TCP) phases were identified and their amounts in the samples were estimated. The size of HAP and β-TCP crystallites was estimated to be in the nanocrystalline domain. FTIR spectra showed the presence of characteristic vibrations for P-O, H-O and Si-O groups and their modification with Si content and calcination temperature. TEM, SEM and AFM images also revealed the morphology of the particles and of their aggregates. These materials have been used to manufacture scaffolds which were tested for their influence on adhesion and proliferation of cells, in human osteoblast culture, considering their further use in bone reconstruction. It was found that an appropriate addition of silicon in nanocalcium phosphate scaffolds leads to an enhanced adhesion and proliferation of cells in osteoblasts in vitro.

Human mesenchymal stem cells response to multi-doped silicon-strontium calcium phosphate coatings

The search for apatitic calcium phosphate coatings to improve implants osteointegration is, nowadays, preferentially focused in the obtaining of compositions closer to that of the inorganic phase of bone. Silicon and strontium are both present in trace concentrations in natural bone and have been demonstrated, by separate, to significantly improve osteoblastic response on calcium phosphate bioceramics. This work aims the controlled and simultaneous multi-doping of carbonated calcium phosphate coatings with both elements, Si and Sr, by pulsed laser deposition technique and the biological response of human mesenchymal stem cells to them. A complete physicochemical characterization has been also performed to analyze the coatings and significant positive effect was obtained at the osteogenic differentiation of cells, confirming the enormous potential of this multi-doping coating approach.

Accurate characterization of pure silicon-substituted hydroxyapatite powders synthesized by a new precipitation route

This paper presents a new aqueous precipitation method to prepare silicon-substituted hydroxyapatites Ca10(PO4)6-y(SiO4)y(OH)2-y(VOH)y (SiHAs) and details the characterization of powders with varying Si content up to y=1.25molmolSiHA(-1). X-ray diffraction, transmission electron microscopy, solid-state nuclear magnetic resonance and Fourier transform infrared spectroscopy were used to accurately characterize samples calcined at 400°C for 2h and 1000°C for 15h. This method allows the synthesis of monophasic SiHAs with controlled stoichiometry. The theoretical maximum limit of incorporation of Si into the hexagonal apatitic structure is y<1.5. This limit depends on the OH content in the channel, which is a function of the Si content, temperature and atmosphere of calcination. These results, particularly those from infrared spectroscopy, raise serious reservations about the phase purity of previously prepared and biologically evaluated SiHA powders, pellets and scaffolds in the literature.

Nanocrystalline hydroxyapatite/si coating by mechanical alloying technique

A novel approach for depositing hydroxyapatite (HA) films on titanium substrates by using mechanical alloying (MA) technique has been developed. However, it was shown that one-hour heat treatment at 800°C of such mechanically coated HA layer leads to partial transformation of desired HA phase to beta-tri-calcium phosphate (β-TCP) phase. It appears that the grain boundary and interface defects formed during MA promote this transformation. It was discovered that doping HA by silicon results in hindering this phase transformation process. The Si-doped HA does not show phase transition to β-TCP or decomposition after heat treatment even at 900°C.

Detection of interfacial phenomena with osteoblast-like cell adhesion on hydroxyapatite and oxidized polystyrene by the quartz crystal microbalance with dissipation

The adhesion process of osteoblast-like cells on hydroxyapatite (HAp) and oxidized polystyrene (PSox) was investigated using a quartz crystal microbalance with dissipation (QCM-D), confocal laser scanning microscope (CLSM), and atomic force microscope (AFM) techniques in order to clarify the interfacial phenomena between the surfaces and cells. The interfacial viscoelastic properties (shear viscosity (η(ad)), elastic shear modulus (μ(ad)), and tan δ) of the preadsorbed protein layer and the interface layer between the surfaces and cells were estimated using a Voigt-based viscoelastic model from the measured frequency (Δf) and dissipation shift (ΔD) curves. In the ΔD-Δf plots, the cell adhesion process on HAp was classified as (1) a mass increase only, (2) increases in both mass and ΔD, and (3) slight decreases in mass and ΔD. On PSox, only ΔD increases were observed, indicating that the adhesion behavior depended on the surface properties. The interfacial μ(ad) value between the material surfaces and cells increased with the number of adherent cells, whereas η(ad) and tanδ decreased slightly, irrespective of the surface. Thus, the interfacial layer changed the elasticity to viscosity with an increase in the number. The tan δ values on HAp were higher than those on PSox and exceeded 1.0. Furthermore, the pseudopod-like structures of the cells on HAp had periodic stripe patterns stained with a type I collagen antibody, whereas those on PSox had cell-membrane-like structures unstained with type I collagen. These results indicate that the interfacial layers on PSox and HAp exhibit elasticity and viscosity, respectively, indicating that the rearrangements of the extracellular matrix and cytoskeleton changes cause different cell-surface interactions. Therefore, the different cell adhesion process, interfacial viscoelasticity, and morphology depending on the surfaces were successfully monitored in situ and evaluated by the QCM-D technique combined with other techniques.

Biosilica-based strategies for treatment of osteoporosis and other bone diseases

Osteoporosis is a common disease in later life, which has become a growing public health problem. This degenerative bone disease primarily affects postmenopausal women, but also men may suffer from reduced bone mineral density. The development of prophylactic treatments and medications of osteoporosis has become an urgent issue due to the increasing proportion of the elderly in the population. Apart from medical/hormonal treatments, current strategies for prophylaxis of osteoporosis are primarily based on calcium supplementation as a main constituent of bone hydroxyapatite mineral. Despite previous reports suggesting an essential role in skeletal growth and development, the significance of the trace element silicon in human bone formation has attracted major scientific interest only rather recently. The interest in silicon has been further increased by the latest discoveries in the field of biosilicification, the formation of the inorganic silica skeleton of the oldest still extant animals on Earth, the sponges, which revealed new insights in the biological function of this element. Sponges make use of silicon to build up their inorganic skeleton which consists of biogenously formed polymeric silica (biosilica). The formation of biosilica is mediated by specific enzymes, silicateins, which have been isolated, characterized, and expressed in a recombinant way. Epidemiological studies revealed that dietary silicon reduces the risk of osteoporosis and other bone diseases. Recent results allowed for the first time to understand the molecular mechanism underlying the protective effect of silicic acid/biosilica against osteoporosis. Biosilica was shown to modulate the ratio of expression of two cytokines involved in bone formation-RANKL and osteoprotegerin. Hence, biosilica has been proposed to have a potential in prophylaxis and therapy of osteoporosis and related bone diseases.

The bio-functional role of calcium in mesoporous silica xerogels on the responses of osteoblasts in vitro

Mesoporous silica xerogels with various amount of calcium (0, 5, 10 and 15%, named m-SXC0, m-SXC5, m-SXC10 and m-SXC15, respectively) were synthesized by template sol-gel methods, and cell responses to m-SXCs were studied using murine pre-osteoblast MC3T3-E1 in vitro. The results showed that cell morphology was not affected by m-SXCs indicating good biocompatibility. Furthermore, cell proliferation ratio on the m-SXCs increased over time, among which m-SXC10 was highest. NO production obviously rose with the increase of Ca content in m-SXCs. ALP activity and PGE(2) level on m-SXC5 significantly improved compared with m-SXC0 while decreased with the increase of Ca content for m-SXC10 and m-SXC15. No obvious discrepancy on osteopontin mRNA expressions was observed among m-SXCs. The collagen I and osteocalcin mRNA expression on m-SXC5 were up-regulated, while decreased on m-SXC15 evidently. The phosphorylation level of ERK 1/2 for the m-SXC10 was highest after 7 days. In conclusion, calcium in m-SXCs plays an important role in osteoblast activity, which indicates mesoporous silica xerogel containing appropriate calcium could stimulate osteoblast proliferation, differentiation, gene expression via the activation of ERK 1/2 signaling pathway, and shows great prospects in bone regeneration field using as a drug controlled release filler.

Biomimetic synthesis of hierarchically porous nanostructured metal oxide microparticles--potential scaffolds for drug delivery and catalysis

Hierarchically porous hybrid microparticles, strikingly reminiscent in their structure of the silica skeletons of single-cell algae, diatoms, but composed of titanium dioxide, and the chemically bound amphiphilic amino acids or small proteins can be prepared by a simple one-step biomimetic procedure, using hydrolysis of titanium alkoxides modified by these ligands. The growth of the hierarchical structure results from the conditions mimicking the growth of skeletons in real diatoms--the self-assembly of hydrolysis-generated titanium dioxide nanoparticles, templated by the microemulsion, originating from mixing the hydrocarbon solvent and water on action of amino acids as surfactants. The obtained microsize nanoparticle aggregates possess remarkable chemical and thermal stability and are promising substrates for applications in drug delivery and catalysis. They can be provided with pronounced surface chirality through application of chiral modifying ligands. They display also high selectivity in sorption of phosphorylated biomolecules or medicines as demonstrated by (1)H and (31)P NMR studies and by in vitro modeling using (32)P-marked ATP as a substrate. The release of the adsorbed model compounds in an inert medium is a very slow process directed by desorption kinetics. It is enhanced, however, noticeably in contact with biological fluids modeling those of the tissues suffering inflammation, which makes the produced material highly attractive for application in medical implants. The developed synthetic approach has been applied successfully also for the preparation of analogous hybrid microparticles based on zirconium dioxide or aluminum sesquioxide.