Silicate and borate glasses as composite fillers: a bioactivity and biocompatibility study

Optimization of Mechanical and Setting Properties in Acrylic Bone Cements Added with Graphene Oxide

The extended use of acrylic bone cements (ABC) in orthopedics presents some disadvantages related to the generation of high temperatures during methyl methacrylate polymerization, thermal tissue necrosis, and low mechanical properties. Both weaknesses cause an increase in costs for the health system and a decrease in the patient’s quality of life due to the prosthesis’s loosening. Materials such as graphene oxide (GO) have a reinforcing effect on ABC’s mechanical and setting properties. This article shows for the first time the interactions present between the factors sonication time and GO percentage in the liquid phase, together with the percentage of benzoyl peroxide (BPO) in the solid phase, on the mechanical and setting properties established for cements in the ISO 5833-02 standard. Optimization of the factors using a completely randomized experimental design with a factorial structure resulted in selecting nine combinations that presented an increase in compression, flexion, and the setting time and decreased the maximum temperature reached during the polymerization. All of these characteristics are desirable for improving the clinical performance of cement. Those containing 0.3 wt.% of GO were highlighted from the selected formulations because all the possible combinations of the studied factors generate desirable properties for the ABC.

The Role of Chitosan and Graphene Oxide in Bioactive and Antibacterial Properties of Acrylic Bone Cements

Acrylic bone cements (ABC) are widely used in orthopedics for joint fixation, antibiotic release, and bone defect filling, among others. However, most commercially available ABCs exhibit a lack of bioactivity and are susceptible to infection after implantation. These disadvantages generate long-term loosening of the prosthesis, high morbidity, and prolonged and expensive treatments. Due to the great importance of acrylic bone cements in orthopedics, the scientific community has advanced several efforts to develop bioactive ABCs with antibacterial activity through several strategies, including the use of biodegradable materials such as chitosan (CS) and nanostructures such as graphene oxide (GO), with promising results. This paper reviews several studies reporting advantages in bioactivity and antibacterial properties after incorporating CS and GO in bone cements. Detailed information on the possible mechanisms by which these fillers confer bioactive and antibacterial properties to cements, resulting in formulations with great potential for use in orthopedics, are also a focus in the manuscript. To the best of our knowledge, this is the first systematic review that presents the improvement in biological properties with CS and GO addition in cements that we believe will contribute to the biomedical field.

Selective Contribution of Bioactive Glasses to Molecular and Cellular Pathways

Over the past few decades, biomedical scientists and surgeons have given substantial attention to bioactive glasses as promising, long-lasting biomaterials that can make chemical connections with the neighboring hard and soft tissues. Several studies have examined the cellular and molecular responses to bioactive glasses to determine if they are suitable biomaterials for tissue engineering and regenerative medicine. In this regard, different ions and additives have been used recently to induce specific characteristics for selective cellular and molecular responses. This Review briefly describes foreign-body response mechanisms and the role of adsorbed proteins as the key players in starting interactions between cells and biomaterials. It then explains the physicochemical properties of the most common bioactive glasses, which have a significant impact on their cellular and molecular responses. It is expected that, with the development of novel strategies, the physiochemical properties of bioactive glasses can be engineered to precisely control proteins' adsorption and cellular functions after implantation.

Novel alginate/hydroxyethyl cellulose/hydroxyapatite composite scaffold for bone regeneration: In vitro cell viability and proliferation of human mesenchymal stem cells

Sodium alginate (SA)/hydroxyethylcellulose (HEC)/hydroxyapatite (HA) composite scaffolds were explored for enhanced in vitro bone regeneration. The SA/HEC/HA composites were synthesized using the lyophilization technique and further cross-linked in the presence of calcium ions to form composite hydrogel networks. The physicochemical, thermal behavior and morphology properties of the prepared scaffolds were characterized through XRD, DSC/TGA, FTIR and SEM. Furthermore, the mechanical behavior of the under investigated scaffolds was determined using texture analyzer. The in vitro bioactivity in SBF and adsorption of bovine serum albumin as well as cell viability for all the prepared scaffolds were also tested. The results indicated that the higher HA concentration (40wt%) enhanced the mechanical properties (23.9MPa), bioactivity and protein adsorption. Cell viability of the tested scaffolds confirmed the non-toxicity of the fabricated systems on the human mesenchymal stem cells (hMSCs). Proliferation capability was also confirmed for the tested scaffolds after 3 and 7days, but the higher HA-containing scaffold showed increased cell populations specially after 7days compared to HA-free scaffolds. This novel composite material could be used in bone tissue engineering as a scaffold material to deliver cells and biologically active molecules.

Composition-structure-properties relationship of strontium borate glasses for medical applications

We have synthesized TiO2 doped strontium borate glasses, 70B2O3-(30-x)SrO-xTiO2 and 70B2 O3 -20SrO(10-x)Na2 O-xTiO2 . The composition dependence of glass structure, density, thermal properties, durability, and cytotoxicity of degradation products was studied. Digesting the glass in mineral acid and detecting the concentrations of various ions using an ICP provided the actual compositions that were 5-8% deviated from the theoretical values. The structure was investigated by means of (11)B magic angle spinning (MAS) NMR spectroscopy. DSC analyses provided the thermal properties and the degradation rates were measured by measuring the weight loss of glass disc-samples in phosphate buffered saline at 37°C in vitro. Finally, the MTT assay was used to analyze the cytotoxicity of the degradation products. The structural analysis revealed that replacing TiO2 for SrO or Na2 O increased the BO3/BO4 ratio suggesting the network-forming role of TiO2 . Thermal properties, density, and degradation rates also followed the structural changes. Varying SrO content predominantly controlled the degradation rates, which in turn controlled the ion release kinetics. A reasonable control (2-25% mass loss in 21 days) over mass loss was achieved in current study. Even though, very high concentrations (up to 5500 ppm B, and 1200 ppm Sr) of ions were released from the ternary glass compositions that saturated the degradation media in 7 days, the degradation products from ternary glass system was found noncytotoxic. However, quaternary glasses demonstrated negative affect on cell viability due to very high (7000 ppm) Na ion concentration. All the glasses investigated in current study are deemed fast degrading with further control over degradation rates, release kinetics desirable.

Analysis of antioxidant and anti-inflammatory activity of silicon in murine macrophages

The purpose of this study is to investigate the antioxidant and anti-inflammatory properties of silicon (Si) in the RAW 264.7 murine macrophage cell line. Lipopolysaccharide (LPS) was used to induce inflammatory conditions, and cells were treated with 0, 1, 5, 10, 25, 50, and 100 μM Si in the form of sodium metasilicate. Tert-butylhydroquinone (TBHQ), a well-known antioxidative substance, was used as a positive control to assess the degree of antioxidative and anti-inflammatory properties of Si. Sodium metasilicate at 100 μM suppressed LPS-induced nitric oxide generation from macrophages 36 h after treatment. In addition, 50 μM sodium metasilicate decreased interleukin-6 production, and the degree of suppression was comparable to that of 10 μM TBHQ treatment. LPS-induced messenger RNA (mRNA) expression of tumor necrosis factor-α and inducible nitric oxide synthase was significantly decreased by 1, 5, 10, and 50 μM sodium metasilicate. Cyclooxygenase-2 mRNA expression was also suppressed by 1, 5, 25, and 50 μM sodium metasilicate. Based on these data, Si has the ability to suppress the production of inflammatory cytokines and mediators, possibly through the suppression of radical scavenger activity and down-regulation of gene expression of inflammatory mediators.

Influence of ibuprofen addition on the properties of a bioactive bone cement

Bioactive bone cements can promote bone growth and the formation of a strong chemical bond between the implant and bone tissue increasing the lifetime of the prosthesis. This study aims at synthesizing a new bioactive bone cement with different amounts of ibuprofen (5, 10 and 20 wt%) using a low toxicity activator, and investigating its in vitro release profile. The effect of ibuprofen (IB) on the setting parameters, residual monomer and bioactivity in synthetic plasma was also evaluated. It was verified that the different IB contents do not prevent the growth of calcium phosphate aggregates on composite surfaces, confirming that the cements are potentially bioactive. A relevant advantage of these formulations was a significant improvement in their curing parameters with increasing IB amount, associated to a reduction of the peak temperature and an extension of the setting time. The investigated cements released an average of about 20 % of the total incorporated ibuprofen during 30 days test, with IB20 liberating the highest percentage of drug 20.6 %, and IB10 and IB5, respectively 19.1 and 17.6 %. This behavior was attributed to the low solubility of this drug in aqueous media and was also related with the hydrophobic character of the polymer. Regarding the therapeutic concentration sufficient to suppress inflammation, the cement with 10 % of ibuprofen achieved the required release rate for 1 week and the cement with 20 % for 2 weeks.

Acrylic formulations containing bioactive and biodegradable fillers to be used as bone cements: properties and biocompatibility assessment

The solid phase of bioactive self-curing acrylic cements was modified by different biodegradable fillers such as poly(3-hydroxybutyrate) (PHB) and its copolymer with hydroxyvalerate (PHBV). The addition of the biodegradable fillers made the cement partially degradable, which is important to allow new bone replacement and ingrowth. The thermal analysis, crystallinity, curing parameters, mechanical properties, degradation and cellular tests were studied in order to characterize the cement performance. Within this context it was verified that the incorporation of the PHBV polymer made the cement more resistant, reaching values within the range reported for typical PMMA bone cements. The results also showed that the cement filled with PHBV took up more water than the cement with PHB after 60 days, for all studied formulations. Regarding the osteoblastic cytocompatibility assessment, the inclusion of the PHBV greatly improved the biological response in both cements filled with the silicate or the borate glass, compared to the inclusion of the PHB. The importance of this novel approach resides on the combination of the properties of the cements components and the possibility of allowing bone regeneration, improving the interfaces with both the prosthesis and the bone, and leading to a new material with suitable performance for application as bone cement.

Properties and osteoblast cytocompatibility of self-curing acrylic cements modified by glass fillers

Materials filled with a silicate glass (MSi) and a borate glass (MB) were developed and compared in terms of their in vitro behavior. The effect of filler composition and concentration (0, 30, 40 and 50 wt%) on the curing parameters, residual monomer, water uptake, weight loss, bioactivity, mechanical properties (bending and compression) and osteoblast cytocompatibility was evaluated. The addition of bioactive glass filler significantly improved the cements curing parameters and the mechanical properties. The most relevant results were obtained for the lower filler concentration (30 t%) a maximum flexural strength of 40.4 Pa for MB3 and a maximum compressive strength of 95.7 MPa for MSi3. In vitro bioactivity in acellular media was enhanced by the higher glass contents in the cements. Regarding the biological assessment, the incorporation of the silicate glass significantly improved osteoblast cytocompatibility, whereas the presence of the borate glass resulted in a poor cell response. Nevertheless it was shown that the surviving cells on the MB surface were in a more differentiated stage compared to those growing over non-filled poly(methyl methacrylate). Results suggest that the developed formulations offer a high range of properties that might be interesting for their use as self-curing cements.