Local bisphosphonate release versus hydroxyapatite coating for stainless steel screw fixation in rat tibiae

Bisphosphonate-incorporated coatings for orthopedic implants functionalization

Bisphosphonates (BPs), the stable analogs of pyrophosphate, are well-known inhibitors of osteoclastogenesis to prevent osteoporotic bone loss and improve implant osseointegration in patients suffering from osteoporosis. Compared to systemic administration, BPs-incorporated coatings enable the direct delivery of BPs to the local area, which will precisely enhance osseointegration and bone repair without the systemic side effects. However, an elaborate and comprehensive review of BP coatings of implants is lacking. Herein, the cellular level (e.g., osteoclasts, osteocytes, osteoblasts, osteoclast precursors, and bone mesenchymal stem cells) and molecular biological regulatory mechanism of BPs in regulating bone homeostasis are overviewed systematically. Moreover, the currently available methods (e.g., chemical reaction, porous carriers, and organic material films) of BP coatings construction are outlined and summarized in detail. As one of the key directions, the latest advances of BP-coated implants to enhance bone repair and osseointegration in basic experiments and clinical trials are presented and critically evaluated. Finally, the challenges and prospects of BP coatings are also purposed, and it will open a new chapter in clinical translation for BP-coated implants.

Zoledronic Acid Implant Coating Results in Local Medullary Bone Growth

Osteoarthritis (OA) can necessitate surgical interventions to restore the function of the joint in severe cases. Joint replacement surgery is one of the procedures implemented to replace the damaged joint with prosthetic implants in severe cases of OA. However, after successful implantation, a fraction of OA patients still require revision surgery due to aseptic prosthetic loosening. Insufficient osseointegration is one of the factors that contribute to such loosening of the bone implant, which is commonly made from titanium-based materials. Zoledronic acid (ZA), a potent bisphosphonate agent, has been previously shown to enhance osseointegration of titanium implants. Herein, we fabricated ZA/Ca composites using a reverse microemulsion method and coated them with 1,2-dioleoyl-sn-glycero-3-phosphate monosodium salt (DOPA) to form ZA/Ca/DOPA composites. Titanium alloy screws were subsequently dip-coated with a suspension of the ZA/Ca/DOPA composites and poly(lactic-co-glycolic) acid (PLGA) in chloroform to yield Za/PLGA-coated screws. The coated screws exhibited a biphasic in vitro release profile with an initial burst release within 48 h, followed by a sustained release over 1 month. To assess their performance in vivo, the Za/PLGA screws were then implanted into the tibiae of Sprague-Dawley rats. After 8 weeks, microCT imaging showed new bone growth along the medullary cavity around the implant site, supporting the local release of ZA to enhance bone growth around the implant. Histological staining further confirmed the presence of new mineralized medullary bone growth resembling the cortical bone. Such local medullary growth represents an opportunity for future studies with alternative coating methods to fine-tune the local release of ZA from the coating and enhance complete osseointegration of the implant.

Bioactive coatings with anti-osteoclast therapeutic agents for bone implants: Enhanced compliance and prolonged implant life

The use of therapeutic agents that inhibit bone resorption is crucial to prolong implant life, delay revision surgery, and reduce the burden on the healthcare system. These therapeutic agents include bisphosphonates, various nucleic acids, statins, proteins, and protein complexes. Their use in systemic treatment has several drawbacks, such as side effects and insufficient efficacy in terms of concentration, which can be eliminated by local treatment. This review focuses on the incorporation of osteoclast inhibitors (antiresorptive agents) into bioactive coatings for bone implants. The ability of bioactive coatings as systems for local delivery of antiresorptive agents to achieve optimal loading of the bioactive coating and its release is described in detail. Various parameters such as the suitable concentrations, release times, and the effects of the antiresorptive agents on nearby cells or bone tissue are discussed. However, further research is needed to support the optimization of the implant, as this will enable subsequent personalized design of the coating in terms of the design and selection of the coating material, the choice of an antiresorptive agent and its amount in the coating. In addition, therapeutic agents that have not yet been incorporated into bioactive coatings but appear promising are also mentioned. From this work, it can be concluded that therapeutic agents contribute to the biocompatibility of the bioactive coating by enhancing its beneficial properties.

A New Insight into Coating's Formation Mechanism Between TiO2 and Alendronate on Titanium Dental Implant

Organophosphorus compounds, like bisphosphonates, drugs for treatment and prevention of bone diseases, have been successfully applied in recent years as bioactive and osseoinductive coatings on dental implants. An integrated experimental-theoretical approach was utilized in this study to clarify the mechanism of bisphosphonate-based coating formation on dental implant surfaces. Experimental validation of the alendronate coating formation on the titanium dental implant surface was carried out by X-ray photoelectron spectroscopy and contact angle measurements. Detailed theoretical simulations of all probable molecular implant surface/alendronate interactions were performed employing quantum chemical calculations at the density functional theory level. The calculated Gibbs free energies of (TiO2)10-alendronate interaction indicate a more spontaneous exergonic process when alendronate molecules interact directly with the titanium surface via two strong bonds, Ti-N and Ti-O, through simultaneous participation common to both phosphonate and amine branches. Additionally, the stability of the alendronate-modified implant during 7 day-immersion in a simulated saliva solution has been investigated by using electrochemical impedance spectroscopy. The alendronate coating was stable during immersion in the artificial saliva solution and acted as an additional barrier on the implant with overall resistivity, R ~ 5.9 MΩ cm2.

Antiosteoporotic Drugs to Promote Bone Regeneration Related to Titanium Implants: A Systematic Review and Meta-Analysis

IMPACT STATEMENT

This meta-analysis was to investigate literature on the administration of antiosteoporotic drugs as an effective adjunct therapy for implant osseointegration using in vivo animal models.

Does Local Ibandronate and/or Pamidronate Delivery Enhance Osseointegration? A Systematic Review

PURPOSE

To our knowledge from indexed literature, the present study is the first one to systematically review the influence of local delivery of pamidronate (PAM) and/or ibandronate (IBA) on osseointegration enhancement. The aim of the present systematic review was to assess the efficacy of IBA and/or PAM local delivery (topically or coating on implants surfaces) in promoting osseointegration.

MATERIALS AND METHODS

To address the focused question, "Does local IBA and/or PAM delivery enhances osseointegration?," indexed databases were searched without time or language restrictions up to and including May 2016 using various combinations of the following keywords: "pamidronate," "ibandronate," "bisphosphonates," "osseointegration," and "topical administration." Letters to the Editor, historic reviews, commentaries, case series, and case reports were excluded.

RESULTS

Fifteen studies were included. Fourteen studies were performed in animals and 2 were clinical trials. One study reported an experimental model and a clinical trial in the same publication. Results from 12 experimental studies and 2 clinical studies reported improved biomechanical properties and/or osseointegration around implants with PAM and/or IBA. Two experimental studies showed that PAM and/or IBA did not improve osseointegration.

CONCLUSIONS

On experimental grounds, local IBA and/or PAM delivery seems to enhance osseointegration; however, from a clinical perspective, further randomized control trials are needed to assess the effectiveness of IBA and PAM in promoting osseointegration around dental implants.

A biphasic calcium phosphate coating for potential drug delivery affects early osseointegration of titanium implants

BACKGROUND

Calcium phosphate (CaP) surface coatings may accelerate osseointegration and serve as a drug delivery system for mineral-binding biomolecules. In a pilot study, the impact of a commercially available, thin CaP coating on early osseous bone remodeling was compared with a modern, subtractive-treated rough surface (SLA-like) in an animal trial.

METHODS

In 16 rabbits, 32 endosseous implants (CaP; n = 16, SLA-like; n = 16) were bilaterally inserted in the proximal tibia after randomization. After 2 and 4 weeks, bone-implant contact (BIC;%) in the cortical (cBIC) and the trabecular bone (sBIC) as well as volume of bone within the screw thread with the highest amount of new-formed bone (area;%) were analyzed.

RESULTS

After 2 weeks, cBIC was significantly higher for CaP when compared with SLA-like (58 ± 7% versus 40.4 ± 18%; P = 0.021). sBIC for CaP was 14.7 ± 8% and for SLA-like 7.2 ± 7.8% (P = 0.081). For area, the mean volumes were 82.8 ± 10.8% for CaP and 73.6 ± 22% for SLA-like (P = 0.311). After 4 weeks, cBIC was 42.9 ± 13% for the CaP and 46.5 ± 29.1% for the SLA-like group (P = 0.775). An sBIC of 6.9 ± 9.3% was calculated for CaP and of 12.3 ± 4.8% for SLA-like (P = 0.202). The values for area were 62.3 ± 24.1% for CaP and 50.1 ± 25.9% for SLA-like (P = 0.379).

CONCLUSIONS

The CaP coating has putative additional advantages in the early osseoconduction phases. It seems suitable for a feasible and clinical applicable bioactivation.

Internal fixation of osteoporotic fractures

Osteoporosis leads to bone fragility and increased risk of fracture. Despite advances in diagnosis and treatment, the prevalence continues to rise. Osteoporotic fracture treatment has a unique set of difficulties related to poor bone quality and traditional approaches, and implants may not perform well. Fixation failure and repeat surgery are poorly tolerated and highly undesirable in this patient population. This review illustrates the most recent updates in internal fixation, implant design, and surgical theory regarding treatment of patients with osteoporotic fractures.

Changes in the mechanical properties and composition of bone during microdamage repair

Under normal conditions, loading activities result in microdamage in the living skeleton, which is repaired by bone remodeling. However, microdamage accumulation can affect the mechanical properties of bone and increase the risk of fracture. This study aimed to determine the effect of microdamage on the mechanical properties and composition of bone. Fourteen male goats aged 28 months were used in the present study. Cortical bone screws were placed in the tibiae to induce microdamage around the implant. The goats were euthanized, and 3 bone segments with the screws in each goat were removed at 0 days, 21 days, 4 months, and 8 months after implantation. The bone segments were used for observing microdamage and bone remodeling, as well as nanoindentation and bone composition, separately. Two regions were measured: the first region (R1), located 1.5 mm from the interface between the screw hole and bone; and the second region (R2), located>1.5 mm from the bone-screw interface. Both diffuse and linear microdamage decreased significantly with increasing time after surgery, with the diffuse microdamage disappearing after 8 months. Thus, screw implantation results in increased bone remodeling either in the proximal or distal cortical bone, which repairs the microdamage. Moreover, bone hardness and elastic modulus decreased with microdamage repair, especially in the proximal bone tissue. Bone composition changed greatly during the production and repair of microdamage, especially for the C (Carbon) and Ca (Calcium) in the R1 region. In conclusion, the presence of mechanical microdamage accelerates bone remodeling either in the proximal or distal cortical bone. The bone hardness and elastic modulus decreased with microdamage repair, with the micromechanical properties being restored on complete repair of the microdamage. Changes in bone composition may contribute to changes in bone mechanical properties.

C3 rho-inhibitor for targeted pharmacological manipulation of osteoclast-like cells

The C3 toxins from Clostridium botulinum (C3bot) and Clostridium limosum (C3lim) as well as C3-derived fusion proteins are selectively taken up into the cytosol of monocytes/macrophages where the C3-catalyzed ADP-ribosylation of Rho results in inhibition of Rho-signalling and characteristic morphological changes. Since the fusion toxin C2IN-C3lim was efficiently taken up into and inhibited proliferation of murine macrophage-like RAW 264.7 cells, its effects on RAW 264.7-derived osteoclasts were investigated. C2IN-C3lim was taken up into differentiated osteoclasts and decreased their resorption activity. In undifferentiated RAW 264.7 cells, C2IN-C3lim-treatment significantly decreased their differentiation into osteoclasts as determined by counting the multi-nucleated, TRAP-positive cells. This inhibitory effect was concentration- and time-dependent and most efficient when C2IN-C3lim was applied in the early stage of osteoclast-formation. A single-dose application of C2IN-C3lim at day 0 and its subsequent removal at day 1 reduced the number of osteoclasts in a comparable manner while C2IN-C3lim-application at later time points did not reduce the number of osteoclasts to a comparable degree. Control experiments with an enzymatically inactive C3 protein revealed that the ADP-ribosylation of Rho was essential for the observed effects. In conclusion, the results indicate that Rho-activity is crucial during the early phase of osteoclast-differentiation. Other bone cell types such as pre-osteoblastic cells were not affected by C2IN-C3lim. Due to their cell-type selective and specific mode of action, C3 proteins and C3-fusions might be valuable tools for targeted pharmacological manipulation of osteoclast formation and activity, which could lead to development of novel therapeutic strategies against osteoclast-associated diseases.

Bisphosphonates induce the osteogenic gene expression in co-cultured human endothelial and mesenchymal stem cells

Bisphosphonates (BPs) are known to affect bone homeostasis and also to have anti-angiogenic properties. Because of the intimate relationship between angiogenesis and osteogenesis, this study analysed the effects of Alendronate (AL) and Zoledronate (ZL) in the expression of endothelial and osteogenic genes on interacting endothelial and mesenchymal stem cells, an issue that was not previously addressed. Alendronate and ZL, 10(-12) -10(-6) M, were evaluated in a direct co-culture system of human dermal microvascular endothelial cells (HDMEC) and human bone marrow mesenchymal stem cells (HMSC), over a period of 14 days. Experiments with the respective monocultures were run in parallel. Alendronate and ZL caused an initial dose-dependent stimulation in the cell proliferation in the monocultures and co-cultures, and did not interfere with their cellular organization. In HDMEC monocultures, the expression of the endothelial genes CD31, VE-cadherin and VEGFR2 was down-regulated by AL and ZL. In HMSC monocultures, the BPs inhibited VEGF expression, but up-regulated the expression of the osteogenic genes alkaline phosphatase (ALP), bone morphogenic protein-2 (BMP-2) and osteocalcin (OC) and, to a greater extent, osteoprotegerin (OPG), a negative regulator of the osteoclastic differentiation, and increased ALP activity. In co-cultured HDMEC/HMSC, AL and ZL decreased the expression of endothelial genes but elicited an earlier and sustained overexpression of ALP, BMP-2, OC and OPG, compared with the monocultured cells; they also induced ALP activity. This study showed for the first time that AL and ZL greatly induced the osteogenic gene expression on interacting endothelial and mesenchymal stem cells.

Biomechanical considerations for surgical stabilization of osteoporotic fractures

The incidence of osteoporotic fractures has been steadily rising along with the aging of the population. Surgical management of these fractures can be a challenge to orthopedic surgeons. Diminished bone mass and frequent comminution make fixation difficult. Advancements in implant design and fixation techniques have served to address these challenges and when properly applied, can improve overall outcome. The purpose of this review is to describe fixation challenges of common osteoporotic fractures and provide options for successful treatment.

Biomedical applications of bisphosphonates

Since their discovery over 100 years ago, bisphosphonates have been used industrially as corrosion inhibitors and complexing agents. With the discovery of their pharmacological activity in the late 1960s, implicating their high affinity for hydroxyapatite, bisphosphonates have been employed in the treatment of bone diseases and as targeting agents for colloids and drugs. They have notably been investigated for the treatment of Paget's disease, osteoporosis, bone metastases, malignancy-associated hypercalcemia, and pediatric bone diseases. Currently, they are first-line medications for several of these diseases and are taken by millions of patients worldwide, mostly postmenopausal women. A major problem associated with their use is their low oral bioavailability. Several delivery systems have been proposed to improve their absorption and to direct them to sites other than bone tissues. Beyond their important pharmacological role, the medical applications of bisphosphonates are numerous. In addition, their metal-chelating properties have been exploited to coat and stabilize implants, nanoparticulates, and contrast agents. In this contribution, we review the pharmacological and clinical uses of bisphosphonates and highlight their novel applications in the pharmaceutical and biomedical fields.

The future of biologic coatings for orthopaedic implants

Implants are widely used for orthopaedic applications such as fixing fractures, repairing non-unions, obtaining a joint arthrodesis, total joint arthroplasty, spinal reconstruction, and soft tissue anchorage. Previously, orthopaedic implants were designed simply as mechanical devices; the biological aspects of the implant were a byproduct of stable internal/external fixation of the device to the surrounding bone or soft tissue. More recently, biologic coatings have been incorporated into orthopaedic implants in order to modulate the surrounding biological environment. This opinion article reviews current and potential future use of biologic coatings for orthopaedic implants to facilitate osseointegration and mitigate possible adverse tissue responses including the foreign body reaction and implant infection. While many of these coatings are still in the preclinical testing stage, bioengineers, material scientists and surgeons continue to explore surface coatings as a means of improving clinical outcome of patients undergoing orthopaedic surgery.

In vivo evaluation of a novel implant coating agent: laminin-1

PURPOSE

The aim of this study was to assess the effect of implant coating with laminin-1 on the early stages of osseointegration in vivo.

MATERIALS AND METHODS

Turned titanium implants were coated with the osteoprogenitor-stimulating protein, laminin-1 (TL). Their osteogenic performance was assessed with removal torque, histomorphometry, and nanoindentation in a rabbit model after 2 and 4 weeks. The performance of the test implants was compared with turned control implants (T), alkali- and heat-treated implants (AH), and AH implants coated with laminin-1.

RESULTS

After 2 weeks, TL demonstrated significantly higher removal torque as compared with T and equivalent to AH. Bone area was significantly higher for the test surface after 4 weeks, while no significant changes were detected on the micromechanical properties of the surrounding bone.

CONCLUSIONS

Within the limitations of this study, our results suggest a great potential for laminin-1 as a coating agent. A turned implant surface coated with laminin-1 could enhance osseointegration comparable with a bioactive implant surface while keeping the surface smooth.