Substituted hydroxyapatites for bone repair

Influence of Magnesium Source on the Mechanochemical Synthesis of Magnesium-Substituted Hydroxyapatite

Magnesium, as one of the most abundant cations in the human body, plays an important role in both physiological and pathological processes. In this study, it was shown that a promising biomedical material, Mg-substituted hydroxyapatite (Mg-HA), can be synthesized via a fast mechanochemical method. For this method, the nature of magnesium-containing carriers was shown to be important. When using magnesium oxide as a source of magnesium, the partial insertion of magnesium cations into the apatite structure occurs. In contrast, when magnesium hydroxide or monomagnesium phosphate is used, single-phase Mg-HA is formed. Both experimental and theoretical investigations showed that an increase in the Mg content leads to a decrease in the lattice parameters and unit cell volume of Mg-HA. Density functional theory calculations showed the high sensitivity of the lattice parameters to the crystallographic position of the calcium site substituted by magnesium. It was shown experimentally that the insertion of magnesium cations decreases the thermal stability of hydroxyapatite. The thermal decomposition of Mg-HA leads to the formation of a mixture of stoichiometric HA, magnesium oxide, and Mg-substituted tricalcium phosphate phases.

Advanced applications of strontium-containing biomaterials in bone tissue engineering

Strontium (Sr) and strontium ranelate (SR) are commonly used therapeutic drugs for patients suffering from osteoporosis. Researches have showed that Sr can significantly improve the biological activity and physicochemical properties of materials in vitro and in vivo. Therefore, a large number of strontium containing biomaterials have been developed for repairing bone defects and promoting osseointegration. In this review, we provide a comprehensive overview of Sr-containing biomaterials along with the current state of their clinical use. For this purpose, the different types of biomaterials including calcium phosphate, bioactive glass, and polymers are discussed and provided future outlook on the fabrication of the next-generation multifunctional and smart biomaterials.

Hydroxyapatite-Bioceramic/Expanded Perlite Hybrid Composites Coating on Ti6Al4V by Hydrothermal Method and in vitro Behavior

This study was aimed to coat a hybrid bioceramic composite onto Ti6Al4V by using hydrothermal method. The Hybrid bioceramic composite for coating was prepared by reinforcing different rations of expanded perlite (EP) and 5 wt.% chitosan into synthesized Hydroxyapatite (HA). Coating was performed at 1800°C for 12 hours. The coated specimens were gradually subjected to a sintering at 6000°C for 1 hour. For in vitro analysis, the specimens were kept in Ringer's solution for 1, 10, and 25 days. All specimens were examined by SEM, EDX, FTIR, and surface roughness analyses for characterizing. It was concluded that as the reinforcement ratio increased, there was an increase in coating thickness and surface roughness. The optimum reinforcement ratio for expanded perlite can be 10 wt.% (A3-B3). With increasing ratio of calcium (Ca) and phosphate (P) (Ca/P), the surface becomes more active in body fluid and then observed the formation of the hydroxycarbonate apatite (HCA) layer. As the waiting time increased, there was an increase in the formation of an apatite structure.

Biomimetic ion substituted and Co-substituted hydroxyapatite nanoparticle synthesis using Serratia Marcescens

Biomimicry is becoming deep-rooted as part of bioceramics owing to its numerous functional advantages. Naturally occurring hydroxyapatite (HA) apart from primary nano structures are also characterised by various ionic substitutions. The ease of accommodating such key elements into the HA lattice is known to enhance bone healing properties of bioceramics. In this work, hydroxyapatite synthesized via biomimetic approach was substituted with individual as well as multiple cations for potential applications in bone repair. Ion substitutions of Sr, Mg and Zn was carried out on HA for the first time by using Serratia grown in a defined biomineralization medium. The individual ions of varying concentration substituted in Serratia HA (SHA) (Sr SHA, Mg SHA and Zn SHA) were analysed for crystallinity, functional groups, morphology and crystal size. All three showed decreased crystallinity, phase purity, large agglomerated aggregates and needle-shaped morphologies. Fourier transform infrared spectroscopy (FTIR) spectra indicated increased carbonate content of 5.8% resembling that of natural bone. Additionally, the reduced O-H intensities clearly portrayed disruption of HA lattice and subsequent ion-substitution. The novelty of this study lies primarily in investigating the co-substitution of a combination of 1% Sr, Zn and Mg in SHA and establishing the associated change in bone parameters. Scanning electron microscope (SEM) and transmission electron microscope (TEM) images clearly illustrated uniform nano-sized agglomerates of average dimensions of 20-50 nm length and 8-15 nm width for Sr SHA; 10-40 nm length and 8-10 nm width for both Zn SHA and Mg SHA and 40-70 nm length and 4-10 nm width in the case of 1% Sr, Zn, Mg SHA. In both individual as well as co-substitutions, significant peak shifts were not observed possibly due to the lower concentrations. However, cell volumes increased in both cases due to presence of Sr²⁺ validating its dominant integration into the SHA lattice. Rich trace ion deposition was presented by energy dispersive X-ray spectroscopy (EDS) and quantified using inductively coupled plasma optical emission spectrometer (ICP-OES). In vitro cytotoxicity studies in three cell lines viz. NIH/3T3 fibroblast cells, MG-63 osteosarcoma cells and RAW 264.7 macrophages showed more than 90% cell viability proving the biocompatible nature of 1% Sr, Zn and Mg in SHA. Microbial biomineralization by Serratia produced nanocrystals of HA that mimicked "bone-like apatite" as evidenced by pure phase, carbonated groups, reduced crystallinity, nano agglomerates, variations in cell parameters, rich ion deposition and non-toxic nature. Therefore ion-substituted and co-substituted biomineralized nano SHA appears to be a suitable candidate for applications in biomedicine addressing bone injuries and aiding regeneration as a result of its characteristics close to that of the human bone.

Inter-Laboratory Study on Measuring the Surface Charge of Electrically Polarized Hydroxyapatite

Surface charges on implants improve integration into bone and so require a clear protocol for achieving a surface charge and comparable results from different laboratories. This study sintered hydroxyapatite (HAp) at one laboratory to remove the influence of the microstructure on surface charge and then polarized/depolarized the pellets at two different laboratories (in Tokyo and Riga). Surface charges on HAp pellets induced by electric polarization at 400 °C in a 5 kV/cm DC electric field were measured by the thermally stimulated depolarization current (TSDC) method as 6-9 µC/cm². The surface charge results were comparable between laboratories and also agreed with previously documented values. Recommendations describe conditions for polarization and depolarization to generate a surface charge and repeatedly achieve a comparable outcome. A visual display of the polarization mechanisms and the contribution to surface charge point to further aspects that need further development.

Calcium Orthophosphate (CaPO4)-Based Bioceramics: Preparation, Properties, and Applications

Various types of materials have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A short time later, such synthetic biomaterials were called bioceramics. Bioceramics can be prepared from diverse inorganic substances, but this review is limited to calcium orthophosphate (CaPO4)-based formulations only, due to its chemical similarity to mammalian bones and teeth. During the past 50 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the CaPO4-based implants would remain biologically stable once incorporated into the skeletal structure or whether they would be resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed, and such formulations became an integrated part of the tissue engineering approach. Now, CaPO4-based scaffolds are designed to induce bone formation and vascularization. These scaffolds are usually porous and harbor various biomolecules and/or cells. Therefore, current biomedical applications of CaPO4-based bioceramics include artificial bone grafts, bone augmentations, maxillofacial reconstruction, spinal fusion, and periodontal disease repairs, as well as bone fillers after tumor surgery. Prospective future applications comprise drug delivery and tissue engineering purposes because CaPO4 appear to be promising carriers of growth factors, bioactive peptides, and various types of cells.

Lithium ion doped carbonated hydroxyapatite compositions: Synthesis, physicochemical characterisation and effect on osteogenic response in vitro

Hydroxyapatite is a commonly researched biomaterial for bone regeneration applications. To augment performance, hydroxyapatite can be substituted with functional ions to promote repair. Here, co-substituted lithium ion (Li⁺) and carbonate ion hydroxyapatite compositions were synthesised by an aqueous precipitation method. The co-substitution of Li⁺ and CO₃^2- is a novel approach that accounts for charge balance, which has been ignored in the synthesis of Li doped calcium phosphates to date. Three compositions were synthesised: Li⁺-free (Li 0), low Li⁺ (Li 0.25), and high Li⁺ (Li 1). Synthesised samples were sintered as microporous discs (70-75 % theoretical sintered density) prior to being ground and fractionated to produce granules and powders, which were then characterised and evaluated in vitro. Physical and chemical characterisation demonstrated that lithium incorporation in Li 0.25 and Li 1 samples approached design levels (0.25 and 1 mol%), containing 0.253 and 0.881 mol% Li⁺ ions, respectively. The maximum CO₃^2- ion content was observed in the Li 1 sample, with ~8 wt% CO₃, with the carbonate ions located on both phosphate and hydroxyl sites in the crystal structure. Measurement of dissolution products following incubation experiments indicated a Li⁺ burst release profile in DMEM, with incubation of 30 mg/ml sample resulting in a Li⁺ ion concentration of approximately 140 mM after 24 h. For all compositions evaluated, sintered discs allowed for favourable attachment and proliferation of C2C12 cells, human osteoblast (hOB) cells, and human mesenchymal stem cells (hMSCs). An increase in alkaline phosphatase (ALP) activity with Li⁺ doping was demonstrated in C2C12 cells and hMSCs seeded onto sintered discs, whilst the inverse was observed in hOB cells. Furthermore, an increase in ALP activity was observed in C2C12 cells and hMSCs in response to dissolution products from Li 1 samples which related to Li⁺ release. Complementary experiments to further investigate the findings from hOB cells confirmed an osteogenic role of the surface topography of the discs. This research has shown successful synthesis of Li⁺ doped carbonated hydroxyapatite which demonstrated cytocompatibility and enhanced osteogenesis in vitro, compared to Li⁺-free controls.

Sr and Mg Doped Bi-Phasic Calcium Phosphate Macroporous Bone Graft Substitutes Fabricated by Robocasting: A Structural and Cytocompatibility Assessment

Bi-phasic calcium phosphates (BCPs) are considered prominent candidate materials for the fabrication of bone graft substitutes. Currently, supplemental cation-doping is suggested as a powerful path to boost biofunctionality, however, there is still a lack of knowledge on the structural role of such substituents in BCPs, which in turn, could influence the intensity and extent of the biological effects. In this work, pure and Mg- and Sr-doped BCP scaffolds were fabricated by robocasting from hydrothermally synthesized powders, and then preliminarily tested in vitro and thoroughly investigated physically and chemically. Collectively, the osteoblast cell culture assays indicated that all types of BCP scaffolds (pure, Sr- or Sr–Mg-doped) delivered in vitro performances similar to the biological control, with emphasis on the Sr–Mg-doped ones. An important result was that double Mg–Sr doping obtained the ceramic with the highest β-tricalcium phosphate (β-TCP)/hydroxyapatite mass concentration ratio of ~1.8. Remarkably, Mg and Sr were found to be predominantly incorporated in the β-TCP lattice. These findings could be important for the future development of BCP-based bone graft substitutes since the higher dissolution rate of β-TCP enables an easier release of the therapeutic ions. This may pave the road toward medical devices with more predictable in vivo performance.

Influence of Magnesium Content on the Physico-Chemical Properties of Hydroxyapatite Electrochemically Deposited on a Nanostructured Titanium Surface

The aim of this research was to obtain hydroxyapatite (HAp)-based coatings doped with different concentrations of Mg on a Ti nanostructured surface through electrochemical techniques and to evaluate the influence of Mg content on the properties of HAp. The undoped and doped HAp-based coatings were electrochemically deposited in galvanostatic pulsed mode on titania nanotubes with a diameter of ~72 nm, being designed to enhance the adhesion of the HAp coatings to the Ti substrate. The obtained materials were investigated by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), X-Ray Diffraction (XRD), and Fourier-Transform Infra-Red spectroscopy (FTIR). The adhesion of the coatings to the substrate was also evaluated with the help of the “tape-test” and the micro-scratch test. The morphology (SEM) of all the coatings is made of very thin and narrow ribbon-like crystals, with some alterations with respect to the Mg amount in the coatings. Thus, a concentration of 1 mM of Mg in the electrolyte leads to wider and thicker ribbon-like crystals, while a concentration of 1.5 mM in the electrolyte generated a morphology that resembles the undoped HAp. Both phase composition (XRD) and chemical bonds (FTIR) analysis proved the formation of HAp in all coatings. Moreover, according to XRD, all coatings have a strong orientation toward the (002) plane. Irrespective of the Mg content, all coatings registered an average roughness between approx. 500 and 600 nm, while the coating thickness increased after addition of Mg, from a value of 9.6 μm, for the undoped HAp, to 11.3 μm and ~13.7 μm for H/Mg1 and H/Mg2, respectively. In terms of adhesion, it was shown that the coatings a H/Mg2 had a poorer adhesion when compared to H/Mg1 and the undoped HAp (H), which registered similar adhesion, indicating that a concentration of 1.5 mM of Mg in the electrolyte reduces the adhesion of the Hap-based coatings to the nanostructured surface. The obtained results indicated that Mg concentrations up to 1 mM in the electrolyte can enhance the properties of HAp-based coatings electrochemically deposited on a nanostructured surface, while even a slightly higher concentration of 1.5 mM can negatively impact the characteristics of HAp coatings.

Assessment of protein adhesion behaviour and biocompatibility of magnesium/Co-substituted HA-based composites for orthopaedic application

Protein adsorption has a great influence on Mg-based metallic implants, which affects cell attachment and cell growth. Adsorption of the proteins (via electrostatic interaction, hydrophobic/hydrophilic, and hydrogen-bonding) on the implant surface is greatly influenced by the surface chemistry of the implant. Hydroxyapatite (HA) is a class of CaP ceramic, beneficial for protein adsorption as it possesses Ca²⁺ and PO₄^3- in it, which are believed to be the protein binding sites on the HA surface. Moreover, HA is the popular choice for reinforcement in the magnesium matrix owing to its similarity with bone mineral composition. However, negligible interaction between HA and Mg particles during sintering is the major limitation for frequent usage of Mg-HA implants. Doping of HA with Mg²⁺ and Zn²⁺ (CoHA) ions leads to its chemistry similar to natural apatite in human bone and facilitates comparatively better bonding with the MgZn matrix. This study mainly aims to delve into the protein adsorption behaviour of Magnesium/Co-substituted HA-based Composites (M3Z-CoHA) along with their biocompatibility. Qualitative and quantitative protein adsorption analysis shows that the addition of 15 wt% CoHA to Mg matrix enhanced protein adsorption by ~60% and renders cell viability >90% after day 1, supporting cellular growth and proliferation. The implants also initiated osteogenic differentiation of the cells after day 7. The leached-out products from all the composites showed no toxicity. The morphology of the cells in all the composites was found as healthy as the control cells. Overall, the composite with 15 wt% HA reinforcement (M3Z-15CoHA) has shown favourable protein adsorption behaviour and cytocompatibility.

Bioactive coatings with anti-osteoclast therapeutic agents for bone implants: Enhanced compliance and prolonged implant life

The use of therapeutic agents that inhibit bone resorption is crucial to prolong implant life, delay revision surgery, and reduce the burden on the healthcare system. These therapeutic agents include bisphosphonates, various nucleic acids, statins, proteins, and protein complexes. Their use in systemic treatment has several drawbacks, such as side effects and insufficient efficacy in terms of concentration, which can be eliminated by local treatment. This review focuses on the incorporation of osteoclast inhibitors (antiresorptive agents) into bioactive coatings for bone implants. The ability of bioactive coatings as systems for local delivery of antiresorptive agents to achieve optimal loading of the bioactive coating and its release is described in detail. Various parameters such as the suitable concentrations, release times, and the effects of the antiresorptive agents on nearby cells or bone tissue are discussed. However, further research is needed to support the optimization of the implant, as this will enable subsequent personalized design of the coating in terms of the design and selection of the coating material, the choice of an antiresorptive agent and its amount in the coating. In addition, therapeutic agents that have not yet been incorporated into bioactive coatings but appear promising are also mentioned. From this work, it can be concluded that therapeutic agents contribute to the biocompatibility of the bioactive coating by enhancing its beneficial properties.

Biocompatible magnesium-doped biphasic calcium phosphate for bone regeneration

Autologous bone grafting remains the gold standard for almost all bone void-filling orthopedic surgery. However, autologous bone grafting has several limitations, thus scientists are trying to identify an ideal synthetic material as an alternative bone graft substitute. Magnesium-doped biphasic calcium phosphate (Mg-BCP) has recently been in the spotlight and is considered to be a potential bone substitute. The Mg-BCP is a mixture of two bioceramics, that is, hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP), doped with Mg2+ , and can be synthesized through chemical wet-precipitation, sol-gel, single diffusion gel, and solid state reactions. Regardless of the synthesis routes, it is found that the Mg2+ preferentially accommodates in β-TCP lattice instead of the HA lattice. The addition of Mg2+ to BCP leads to desirable physicochemical properties and is found to enhance the apatite-forming ability as compared to pristine BCP. In vitro results suggest that the Mg-BCP is bioactive and not toxic to cells. Implantation of Mg-BCP in in vivo models further affirmed its biocompatibility and efficacy as a bone substitute. However, like the other bioceramics, the optimum physicochemical properties of the Mg-BCP scaffold have yet to be determined. Further investigations are required regarding Mg-BCP applications in bone tissue engineering.

PCL-Coated Multi-Substituted Calcium Phosphate Bone Scaffolds with Enhanced Properties

Ionic substitutions within the hydroxyapatite lattice are a widely used approach to mimic the chemical composition of the bone mineral. In this work, Sr-substituted and Mg- and Sr-co-substituted calcium phosphate (CaP) scaffolds, with various levels of strontium and magnesium substitution, were prepared using the hydrothermal method at 200 °C. Calcium carbonate skeletons of cuttlefish bone, ammonium dihydrogenphosphate (NH₄H₂PO₄), strontium nitrate (Sr(NO₃)₂), and magnesium perchlorate (Mg(ClO₄)₂) were used as reagents. Materials were characterized by means of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Whole powder pattern decomposition refinements of XRD data indicated that increased magnesium content in the Mg- and Sr-co-substituted scaffolds was related to an increased proportion of the whitlockite (WH) phase in the biphasic hydroxyapatite (HAp)/WH scaffolds. In addition, refinements indicate that Sr²⁺ ions have replaced Ca²⁺ sites in the WH phase. Furthermore, PCL-coated Mg-substituted and Sr- and Mg-co-substituted scaffolds, with the HAp:WH wt. ratio of 90:10 were prepared by vacuum impregnation. Results of compression tests showed a positive impact of the WH phase and PCL coating on the mechanical properties of scaffolds. Human mesenchymal stem cells (hMSCs) were cultured on composite scaffolds in an osteogenic medium for 21 days. Immunohistochemical staining showed that Mg-Sr-CaP/PCL scaffold exhibited higher expression of collagen type I than the Mg-CaP/PCL scaffold, indicating the positive effect of Sr²⁺ ions on the differentiation of hMSCs, in concordance with histology results. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) analysis confirmed an early stage of osteogenic differentiation.

X-Ray Diffraction and Multifrequency EPR Study of Radiation-Induced Room Temperature Stable Radicals in Octacalcium Phosphate

Octacalcium phosphate (OCP) {Ca8H2(PO4)6×5H2O] has attracted increasing attention over the last decade as a transient intermediate to the biogenic apatite for bone engineering and in studies involving the processes of pathological calcification. In this work, OCP powders obtained by hydrolysis of dicalcium phosphate dehydrate were subjected to X- and γ-ray irradiation and studied by means of stationary and pulsed electron paramagnetic resonance at 9, 36 and 94 GHz microwave frequencies. Several types of paramagnetic centers were observed in the investigated samples. Their spectroscopic parameters (components of the g and hyperfine tensors) were determined. Based on the extracted parameters, the induced centers were ascribed to H0, CO33-, CO2- and nitrogen-centered (presumably NO32-) radicals. The spectroscopic parameters of the nitrogen-centered stable radical in OCP powders were found to be markedly different from those in hydroxyapatite. According to X-ray diffraction data, γ-ray irradiation allowed the phase composition of calcium phosphates to change; all minor phases with the exception of OCP and hydroxyapatite disappeared, while the OCP crystal lattice parameters changed after irradiation. The obtained results could be used for the tracing of mineralization processes from their initiation to completion of the final product, identification of the OCP phase, and to follow the influence of radiation processes on phase composition of calcium phosphates.

Bioactive Sr2+/Fe3+co-substituted hydroxyapatite in cryogenically 3D printed porous scaffolds for bone tissue engineering

Developing multi-doped bioceramics that possess biological multifunctionality is becoming increasingly attractive and promising for bone tissue engineering. In this view innovative Sr²⁺/Fe³⁺co-substituted nano-hydroxyapatite with gradient doping concentrations fixed at 10 mol% has been deliberately designed previously. Herein, to evaluate their therapeutic potentials for bone healing, novel gradient SrFeHA/PCL scaffolds are fabricated by extrusion cryogenic 3D printing technology with subsequent lyophilization. The obtained scaffolds exhibit desired 3D interconnected porous structure and rough microsurface, along with appreciable release of bioactive Sr²⁺/Fe³⁺from SrFeHA components. These favorable physicochemical properties render printed scaffolds realizing effective biological applications bothin vitroandin vivo, particularly the moderate co-substituted Sr7.5Fe2.5HA and Sr5Fe5HA groups exhibit remarkably enhanced bioactivity that not only promotes the functions of MC3T3 osteoblasts and HUVECs directly, but also energetically manipulates favorable macrophages activation to concurrently facilitate osteogenesis/angiogenesis. Moreover,in vivosubcutaneous implantation and cranial defects repair outcomes further confirm their superior capacity to dictate immune reaction, implants vascularization andin situbone regeneration, mainly dependent on the synergetic effects of released Sr²⁺/Fe³⁺. Accordingly, for the first time, present study highlights the great potential of Sr7.5Fe2.5HA and Sr5Fe5HA for ameliorating bone regeneration process by coupling of immunomodulation with enhanced angio- and osteogenesis and hence may provide a new promising alternative for future bone tissue engineering.

Effects of Synthesis Conditions on the Formation of Si-Substituted Alpha Tricalcium Phosphates

Powders of α-TCP containing various amounts of silicon were synthesized by two different methods: Wet chemical precipitation and solid-state synthesis. The obtained powders were then physico–chemically studied using different methods: Scanning and transmission electron microscopy (TEM and SEM), energy-dispersive X-ray spectroscopy (EDS), powder X-ray diffractometry (PXRD), infrared and Raman spectroscopies (FT-IR and R), and solid-state nuclear magnetic resonance (ssNMR). The study showed that the method of synthesis affects the morphology of the obtained particles, the homogeneity of crystalline phase and the efficiency of Si substitution. Solid-state synthesis leads to particles with a low tendency to agglomerate compared to the precipitation method. However, the powders obtained by the solid-state method are less homogeneous and contain a significant amount of other crystalline phase, silicocarnotite (up to 7.33%). Moreover, the microcrystals from this method are more disordered. This might be caused by more efficient substitution of silicate ions: The silicon content of the samples obtained by the solid-state method is almost equal to the nominal values.

A facile one-step preparation of Ca10(PO4)6(OH)2/Li-BioMOFs resin nanocomposites with Glycyrrhiza glabra (licorice) root juice as green capping agent and mechanical properties study

The Ca₁₀(PO₄)₆(OH)₂/Li-BioMOFs resin nanocomposites were prepared and introduced as a new dental resin nanocomposite. Ca₁₀(PO₄)₆(OH)₂/Li-BioMOFs resin nanocomposites were synthesized with individual mechanical properties in the presence of lecithin as a biostabilizer. The hydrothermal synthesis of hydroxyapatite (HAp) nanostructures occurred in the presence of Glycyrrhiza glabra (liquorice) root juice that acts not only as a green capping agent but also as a reductant compound with a high steric hindrance agent. Results showed that the mechanical properties of nano-Ca₁₀(PO₄)₆(OH)₂ structures with a concentration of 60 ppm Li-BioMOF were increased by ∼132.5 MPa and 11.5 GPa for the flexural and Young's modulus, respectively. Based on the optical absorption ultraviolet-visible spectrum, the HAp nanocrystallites had a direct bandgap energy of 4.2 eV. The structural, morphological, and mechanical properties of the as-prepared nanoparticles were characterized with the FT-IR (Fourier-transform infra-red), UV-Vis (ultraviolet visible) spectrums, X-ray diffraction, SEM (scanning electron microscopy), and TEM (transmission electron microscopy) images, and atomic force microscopy (AFM). It is suggested that HAp structures loaded on the Li-BioMOFs are as a suitable and novel substrate which can be considered as a promising biomaterial in dental resin nanocomposites significantly improved the strength and modulus.

Synthesis of Silicon- and Carbonate-doped Biomimetic Hydroxyapatite in the Presence of Citrate Ions and its Physicochemical, Bioactivity Properties

The present study investigated the phase composition, the structural, morphological, and bioactivity properties of silicon- and carbonate-doped biomimetic hydroxyapatite synthesized by precipitation from aqueous solutions in the presence of different amounts of citrate ions. The X-ray diffraction and Fourier transform infrared spectroscopy analyses confirmed that all the samples exhibited single-phase. Base on the results of the morphological study, all the obtained samples consisted of porous agglomerated particles made up of tiny crystallites in the nanometer range. The change in structural order, as well as the decrease in particle size and degree of crystallinity result from the presence of citrate ions were revealed by X-ray diffraction, dynamic light scattering, and scanning electron microscopy analyses. Bioactivity properties of samples were studied by analyzing their bioresorbability in physiological saline (ω (NaCl) = 0.9%) and evaluating their solubility in SBF solution after a certain period of soaking time. The amount of the released Ca2+ ions was found to increase with the increasing concentration of citrate ions introduced in the synthesis process. The better solubility of material with the presence of citrate ions was beneficial in the growth of apatite on its surface that made produced material more biocompatible.

Interplay between surface chemistry and osteogenic behaviour of sulphate substituted nano-hydroxyapatite

Surface potential and chemical compositions of the bioceramics are the core of therapeutic effect and are key factors to trigger the interfacial interactions with surrounding hard and soft tissues to repair and regeneration. Ionic substitution in hydroxyapatite (Hap) lattice significantly influences the zeta potential from -16.46 ± 0.66 mV to -6.01 ± 0.68 mV as well as an average nano-rod length from ~40 nm to ~26 nm with respect to SO₄^2- ion content. Moreover, the surface chemistry of Hap is mainly inter-related to SO₄^2- substitution rate at PO₄^2- site. Specifically, nano-sized feature with lowered negative surface potential influences the protein adsorption via their weak repulsive or attractive forces. Bovine serum albumin (BSA) and lysozyme (LSZ) adsorption studies confirmed the increased affinity to active binding sites of Hap's surface. Further, SO₄^2- ion substituted Hap (SNHA) showed improved in vitro biomineralization activity and alkaline phosphatase activity. Expression of osteogenic biomarkers such as collagen I, V, osteopontin and osteocalcin were evaluated in Saos-2 and MC3T3-E1 cells. Gene expression of these markers was influenced by SO₄^2- ion content in Hap (maximum with 10SNHA). Altogether, these data emphasizes that chemical composition and surface properties are dominant aspect in bioceramic development towards bone regeneration.

Using HAADF-STEM for atomic-scale evaluation of incorporation of antibacterial Ag atoms in a β-tricalcium phosphate structure

Structural evaluation of ionic additions in calcium phosphates that enhance their performance is a long-lasting area of research in the field of biomedical materials. Ionic incorporation in β-tricalcium phosphate (β-TCP) structures is indispensable for obtaining desirable properties for specific functions and applications. Owing to its complex structure and beam-sensitive nature, determining the extent of ion incorporation and its corresponding location in the β-TCP structure is challenging. Further, very few experimental studies have been able to estimate the location of Ag atoms incorporated in a β-TCP structure while considering the associated changes in lattice parameters. Although the incorporation alters the lattice parameters, the alteration is not significant enough for estimating the location of the incorporated Ag atoms. Here, Ag incorporation in a β-TCP structure was evaluated on atomic scale using scanning transmission electron microscopy (STEM). To the best of our knowledge, this is the first report to unambiguously determine the location of the incorporated Ag atoms in the β-TCP structure by comparing z-contrast profiles of the Ag and Ca atoms by combining the state-of-art STEM observations and STEM image simulations. The Ag incorporation in the Ca(4) sites of β-TCP, as estimated by the Rietveld refinement, was in good agreement with the high-angle annular dark-field STEM observations and the simulations of the location of Ag atoms for [001] and [010] zone axes.

Calcium Phosphate Carrying Simvastatin Enhances Bone Regeneration: A Systematic Review

Several studies have aimed to develop alternative therapeutic biomaterials for bone repair. The purpose of this systematic review was to evaluate how statins carried by calcium phosphate affect the formation and regeneration of bone tissue in animal models when compared to other biomaterials or spontaneous healing. This systematic review followed the recommendations of the Cochrane Handbook for Systematic Reviews of Interventions, the PRISMA guidelines, and the Preclinical Systematic Review & Meta-analysis Facility (SyRF). The protocol of this systematic review was registered in PROSPERO (CRD42018091112) and in CAMARADES. In addition, ARRIVE checklists were followed in order to increase the quality and transparency of the search. An electronic search was performed using the MEDLINE/PubMed, Scopus, SciELO, and PROSPERO library databases. The authors used a specific search strategy for each database, and they also conducted a search in the grey literature and cross-references. The eligibility criteria were animal studies, which evaluated bone repair treated with calcium phosphate as a simvastatin carrier. The selection process yielded 8 studies from the 657 retrieved. All manuscripts concluded that locally applied simvastatin carried by calcium phosphate is biocompatible, enhanced bone repair and induced statistically greater bone formation than cloth or calcium phosphate alone. In conclusion, the pertinent pre-clinical studies evidenced the calcium phosphate biocompatibility and its effectiveness in delivering SIM to improve the repair of bone defects. So, clinical trials are encouraged to investigate the impact of SIM associated with calcium phosphate bone graft in repairing bone defect in humans.

Obtaining and Characterizing Thin Layers of Magnesium Doped Hydroxyapatite by Dip Coating Procedure

A simple dip coating procedure was used to prepare the magnesium doped hydroxyapatite coatings. An adapted co-precipitation method was used in order to obtain a Ca25−xMgx(PO4)6(OH)2, 25MgHAp (xMg = 0.25) suspension for preparing the coatings. The stabilities of 25MgHAp suspensions were evaluated using ultrasound measurements, zeta potential (ZP), and dynamic light scattering (DLS). Using transmission electron microscopy (TEM) and scanning electron microscopy (SEM) information at nanometric resolution regarding the shape and distribution of the 25MgHAp particles in suspension was obtained. The surfaces of obtained layers were evaluated using SEM and atomic force microscopy (AFM) analysis. The antimicrobial evaluation of 25MgHAp suspensions and coatings on various bacterial strains and fungus were realized. The present study presents important results regarding the physico-chemical and antimicrobial studies of the magnesium doped hydroxyapatite suspensions, as well as the coatings. The studies have shown that magnesium doped hydroxyapatite suspensions prepared with xMg = 0.25 presented a good stability and relevant antimicrobial properties. The coatings made using 25MgHAp suspension were homogeneous and showed remarkable antimicrobial properties. Also, it was observed that the layer realized has antimicrobial properties very close to those of the suspension. Both samples of the 25MgHAp suspensions and coatings have very good biocompatible properties.

Advanced Mg, Zn, Sr, Si Multi-Substituted Hydroxyapatites for Bone Regeneration

Purpose

Compositional tailoring is gaining more attention in the development of advanced biomimetic nanomaterials. In this study, we aimed to prepare advanced multi-substituted hydroxyapatites (ms-HAPs), which show similarity with the inorganic phase of bones and might have therapeutic potential for bone regeneration.

Materials

Novel nano hydroxyapatites substituted simultaneously with divalent cations: Mg²⁺ (1.5%), Zn²⁺ (0.2%), Sr²⁺ (5% and 10%), and Si (0.2%) as orthosilicate (SiO₄^4-) were designed and successfully synthesized for the first time.

Methods

The ms-HAPs were obtained via a wet-chemistry precipitation route without the use of surfactants, which is a safe and ecologically friendly method. The composition of synthesized materials was determined by inductively coupled plasma optical emission spectrometry (ICP-OES). The materials were characterized by X-ray powder diffraction (XRD), FT-IR and FT-Raman spectroscopy, BET measurements and by imaging techniques using high-resolution TEM (HR-TEM), FE-SEM coupled with EDX, and atomic force microscopy (AFM). The ion release was measured in water and in simulated body fluid (SBF).

Results

Characterization methods confirmed the presence of the unique phase of pure stoichiometric HAP structure and high compositional purity of all synthesized nanomaterials. The doping elements influenced the crystallite size, the crystallinity, lattice parameters, morphology, particle size and shape, specific surface area, and porosity. Results showed a decrease in both nanoparticle size and crystallinity degree, coupled with an increase in specific surface area of these advanced ms-HAP materials, in comparison with pure stoichiometric HAP. The release of biologically important ions was confirmed in different liquid media, both in static and simulated dynamic conditions.

Conclusion

The incorporation of the four substituting elements into the HAP structure is demonstrated. Synthesized nanostructured ms-HAP materials might inherit the in vivo effects of substituting functional elements and properties of hydroxyapatite for bone healing and regeneration. Results revealed a rational tailoring approach for the design of a next generation of bioactive ms-HAPs as promising candidates for bone regeneration.

Effect of Hydrothermal (Sr)-Hydroxyapatite Coatings on the Corrosion Resistance and Mg2+ Ion Release to Enhance Osteoblastic Cell Responses of AZ91D Alloy

The biomedical applications of Mg-based alloys are limited by their rapid corrosion rate in the body fluid. In this study, the hydrothermal synthesis is employed to produce protective bioactive hydroxyapatite coating (HAC) and strontium-substituted hydroxyapatite coating (Sr-HAC) to further enhance the corrosion resistance and in vitro biocompatibility of biodegradable AZ91D Mg alloy in physiological environments. For comparison, the brucite Mg(OH)₂ prepared by the alkaline pre-treatment is designated as a control group. Experimental evidences of XRD and XPS analysis confirm that Sr²⁺ ions can be incorporated into HA crystal structure. It is noted that the hydrothermally synthesized Sr-HAC conversion coating composed of a specific surface topography with the nanoscaled flake-like fine crystallites is constructed on the AZ91D Mg alloy. The hydrophilicity of Mg substrate is effectively enhanced with the decrease in static contact angles after performing alkaline and hydrothermal treatments. Potentiodynamic polarization measurements reveal that the nanostructured Sr-HAC-coated specimens exhibit superior corrosion resistance than HAC and alkaline pre-treated Mg(OH)₂. Moreover, immersion tests demonstrate that Sr-HAC provides favorable long-term stability for the Mg alloy with decreasing concentration of released Mg²⁺ ions in the SBF and the reduced corrosion rate during the immersion length of 30 days. The cells cultured on Sr-HAC specimens exhibit higher viability than those on the alkaline-pre-treated Mg(OH)₂ and HAC specimens. The Sr-substituted HA coating with a nanostructured surface topography can help to stimulate the cell viability of osteoblastic cells.

Zn-HA/Bi-HA biphasic coatings on Titanium: Fabrication, characterization, antibacterial and biological activity

Hydroxyapatite (HA) coatings have been of important as biocompatible coatings for dental and bone tissue engineering application. However, the poor antibacterial performance and weak biological activity of HA coatings limited their clinical applications. As a strategy to improve the antibacterial performance and biological activity of HA, Zinc and bismuth ions were incorporated into HA lattice by substituting Ca²⁺ ions, respectively, and thus zinc substituted hydroxyapatite/bismuth substituted hydroxyapatite (Zn-HA/Bi-HA) biphasic coatings on titanium plates with various ratios were fabricated via sol-gel and dip-coating processes. The purity of the Zn-HA and Bi-HA phase was confirmed by X-ray diffraction (XRD) test. The biphasic coatings showed slower dissolution rate than pure HA coating. Furthermore, the Zn-HA/Bi-HA coatings reveal good biomineralization activity in simulated body fluid (SBF) by forming regular spherical apatite agglomerates. Moreover, the biphasic Zn-HA/Bi-HA coatings exhibited that improved antimicrobial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as compared to pure HA coatings. The CCK-8 assays demonstrate Zn-HA/Bi-HA coatings showed no toxicity to MG63 cells, and the Zn-HA/Bi-HA2 (Zn-HA:Bi-HA=64:1) coating is more effective to enhance the proliferation of MG63 cells compared to other coatings. This finding suggests Zn-HA/Bi-HA biphasic coatings are promising candidates for biomedical applications.

Tailored Three-Dimensionally Printed Triply Periodic Calcium Phosphate Implants: A Preclinical Study for Craniofacial Bone Repair

Finding alternative strategies for the regeneration of craniofacial bone defects (CSD), such as combining a synthetic ephemeral calcium phosphate (CaP) implant and/or active substances and cells, would contribute to solving this reconstructive roadblock. However, CaP's architectural features (i.e., architecture and composition) still need to be tailored, and the use of processed stem cells and synthetic active substances (e.g., recombinant human bone morphogenetic protein 2) drastically limits the clinical application of such approaches. Focusing on solutions that are directly transposable to the clinical setting, biphasic calcium phosphate (BCP) and carbonated hydroxyapatite (CHA) 3D-printed disks with a triply periodic minimal structure (TPMS) were implanted in calvarial critical-sized defects (rat model) with or without addition of total bone marrow (TBM). Bone regeneration within the defect was evaluated, and the outcomes were compared to a standard-care procedure based on BCP granules soaked with TBM (positive control). After 7 weeks, de novo bone formation was significantly greater in the CHA disks + TBM group than in the positive controls (3.33 mm3 and 2.15 mm3, respectively, P=0.04). These encouraging results indicate that both CHA and TPMS architectures are potentially advantageous in the repair of CSDs and that this one-step procedure warrants further clinical investigation.

Bismuth-Doped Nanohydroxyapatite Coatings on Titanium Implants for Improved Radiopacity and Antimicrobial Activity

This study aims to present the possibility to obtain bismuth-doped nanohydroxyapatite coatings on the surface of the titanium implants by using a solution-derived process according to an established biomimetic methodology. The bioactivity of the titanium surface was increased by an alkali-thermal treatment. Then, under biomimetic conditions, the titanium surface was coated with a Bi-doped nanohydroxyapatite layer by using a modified supersaturated calcification solution (SCS) containing a bismuth salt. The apatite deposits were analyzed by scanning electron microscopy coupled with X-ray analysis (SEM-EDX), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and digital X-rays radiography method. The results indicate that the Bi-doped nanohydroxyapatite coatings on titanium surface were produced. These coatings exhibit a good radiopacity, thus enhancing their applications in dental and orthopedic fields. Additionally, the Bi-doped nanohydroxyapatite coatings show significant antimicrobial activity against Escherichia coli and Staphylococcus aureus bacteria.

The topography and proliferative activity of cells immunoreactive to various growth factors in rat femoral bone tissues after experimental fracture and implantation of titanium implants with bioactive biodegradable coatings

BACKGROUND

Biodegradable implant coatings promote proliferation and expression of BMP-2, VEGF, and TGF-β2 genes and enhance BMP-2, VEGF, and TGF-β2 regulatory effects at different stages of reparative osteogenesis.

OBJECTIVE

To study the topography and ratio of PCNA-, VEGF-, BMP-2-, and TGF-β2-immunoreactive cells in rat femoral bone after closed fracture and implantation of titanium implants with biodegradable calcium phosphate and hydroxyapatite coatings.

METHODS

Standard titanium implant screws and similar implants with bioactive coatings were used. A total of 18 rats were randomly divided into three groups, two experimental and a control one. The rats in the first experimental group were implanted with implants without specific coating, while those in the second group, with implants with specific coatings. The control rats were subjected to the same fracture as the experimental ones without subsequent implantation. On days 7, 14, and 30 of experiment, the rats were sampled for histological examination. Histological sections were prepared and processed for PCNA, BMP-2, VEGF, and TGF-β2 immunoreactivity.

RESULTS

In the regeneration zone, PCNA-immunoreactive cells substantially outnumbered other immunoreactive cell types. During the first two weeks after fracture, in the immediate vicinity of implant surface, the rate of VEGF production increased in osteoblast subpopulations and level of TGF-32 immunoreactivity decreased in chondroblasts. The level of TGF-32 was maximum on day 30 of experiment. BMP-2-immunoreactive osteocytes were found in the zone of external general plates. They accumulated at implants with calcium phosphate coating. Their number gradually increased by day 30 of experiment.

CONCLUSIONS

The present data suggest that biodegradable implant coatings promote proliferation and expression of BMP-2, VEGF, and TGF-β2 genes and enhance BMP-2, VEGF, and TGF-β2 regulatory effects at different stages of reparative osteogenesis.

Enhanced bioactivity of Si3N4 through trench-patterning and back-filling with Bioglass®

Using a simple and innovative sandblasting process, disks of monolithic biomedical silicon nitride (β-Si₃N₄) were texturized with a matrix of regular, discrete square trenches with a total depth in the range of hundreds of microns. The process consisted of sandblasting Si₃N₄ substrates through a stainless-steel wire-mesh (150 or 200 μm) using abrasive silicon carbide powders (α-SiC, ∼40 μm) under 1,034 kPa (150 psi) of gas pressure. The depth of the porosities could be controlled varying both the treatment time and the distance from the surface. Part of the samples were then filled with 45S5 Bioglass® powders to improve the osteointegration and stimulate the production of bone tissue. Due to the increased macroscopic and microscopic roughness, biological testing using human osteosarcoma cells (SaOS-2) showed improved cell proliferation and greater production of both mineral (hydroxyapatite) and organic (collagen) phases on the patterned surfaces compared to untreated β-Si₃N₄ or to the biomedical titanium control samples. Both of these effects were further enhanced when the porosities were filled with Bioglass®.

Dual Doping of Silicon and Manganese in Hydroxyapatites: Physicochemical Properties and Preliminary Biological Studies

Silicated hydroxyapatite powders enriched with small amounts of manganese (Mn²⁺) cations were synthesized via two different methods: precipitation in aqueous solution and the solid-state method. The source of Mn²⁺ ions was manganese acetate, while silicon was incorporated using two different reagents: silicon acetate and sodium metasilicate. Powder X-ray diffraction (PXRD) analysis showed that the powders obtained via the precipitation method consisted of single-phase nanocrystalline hydroxyapatite. In contrast, samples obtained via the solid-state method were heterogenous and contaminated with other phases, (i.e., calcium oxide, calcium hydroxide, and silicocarnotite) arising during thermal treatment. The transmission electron microscope (TEM) images showed powders obtained via the precipitation method were nanosized and elongated, while solid-state synthesis produced spherical microcrystals. The phase identification was complemented by Fourier transform infrared spectroscopy (FTIR). An in-depth analysis via solid-state nuclear magnetic resonance (ssNMR) was carried out, using phosphorus ³¹P single-pulse Bloch decay (BD) (³¹P BD) and cross-polarization (CP) experiments from protons to silicon-29 nuclei (¹H → ²⁹Si CP). The elemental measurements carried out using wavelength-dispersive X-ray fluorescence (WD-XRF) showed that the efficiency of introducing manganese and silicon ions was between 45% and 95%, depending on the synthesis method and the reagents. Preliminary biological tests on the bacteria Allivibrio fisheri (Microtox®) and the protozoan Spirostomum ambiguum (Spirotox) showed no toxic effect in any of the samples. The obtained materials may find potential application in regenerative medicine, bone implantology, and orthopedics as bone substitutes or implant coatings.

Biological Response to Macroporous Chitosan-Agarose Bone Scaffolds Comprising Mg- and Zn-Doped Nano-Hydroxyapatite

Modification of implantable scaffolds with magnesium and zinc for improvement of bone regeneration is a growing trend in the engineering of biomaterials. The aim of this study was to synthesize nano-hydroxyapatite substituted with magnesium (Mg²⁺) (HA-Mg) and zinc (Zn²⁺) (HA-Zn) ions in order to fabricate chitosan-agarose-hydroxyapatite (HA) scaffolds (chit/aga/HA) with improved biocompatibility. Fabricated biomaterials containing Mg²⁺ or Zn²⁺ were tested using osteoblasts and mesenchymal stem cells to determine the effect of incorporated metal ions on cell adhesion, spreading, proliferation, and osteogenic differentiation. The study was conducted in direct contact with the scaffolds (cells were seeded onto the biomaterials) and using fluid extracts of the materials. It demonstrated that incorporation of Mg²⁺ ions into chit/aga/HA structure increased spreading of the osteoblasts, promoted cell proliferation on the scaffold surface, and enhanced osteocalcin production by mesenchymal stem cells. Although biomaterial containing Zn²⁺ did not improve cell proliferation, it did enhance type I collagen production by mesenchymal stem cells and extracellular matrix mineralization as compared to cells cultured in a polystyrene well. Nevertheless, scaffolds made of pure HA gave better results than material with Zn²⁺. Results of the experiments clearly showed that modification of the chit/aga/HA scaffold with Zn²⁺ did not have any positive impact on cell behavior, whereas, incorporation of Mg²⁺ ions into its structure may significantly improve biocompatibility of the resultant material, increasing its potential in biomedical applications.

Catechins-Modified Selenium-Doped Hydroxyapatite Nanomaterials for Improved Osteosarcoma Therapy Through Generation of Reactive Oxygen Species

Osteosarcoma is the most common bone cancer with limited therapeutic options. It can be treated by selenium-doped hydroxyapatite owing to its known antitumor potential. However, a high concentration of Se is toxic toward normal and stem cells whereas its low concentration cannot effectively remove cancer cells. Therefore, the current study was aimed to improve the anticancer activity of Se-HAp nanoparticles through catechins (CC) modification owing to their high cancer therapeutic value. The sequentially developed catechins modified Se-HAp nanocomposites (CC/Se-HAp) were characterized for various physico-chemical properties and antitumor activity. Structural analysis showed the synthesis of small rod-like single phase HAp nanoparticles (60 ± 15 nm), which effectively interacted with Se and catechins and formed agglomerated structures. TEM analysis showed the internalization and degradation of CC/Se-HAp nanomaterials within MNNG/HOS cells through a non-specific endocytosis process. Cell toxicity analysis showed that catechins modification improved the antitumor activity of Se-HAp nanocomposites by inducing apoptosis of human osteosarcoma MNNG/HOS cell lines, through generation of reactive oxygen species (ROS) which in turn activated the caspase-3 pathway, without significantly affecting the growth of human normal bone marrow stem cells (hBMSCs). qPCR and western blot analyses revealed that casp3, p53, and bax genes were significantly upregulated while cox-2 and PTK-2 were slightly downregulated as compared to control in CC/Se-HAp-treated MNNG/HOS cell lines. The current study of combining natural biomaterial (i.e., catechins) with Se and HAp, can prove to be an effective therapeutic approach for bone cancer therapy.

Crystal Chemistry and Antibacterial Properties of Cupriferous Hydroxyapatite

Copper-doped hydroxyapatite (HA) of nominal composition Ca₁₀(PO₄)₆[Cu_x(OH)_2-2xO_x] (0.0 ≤ x ≤ 0.8) was prepared by solid-state and wet chemical processing to explore the impact of the synthesis route and mode of crystal chemical incorporation of copper on the antibacterial efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) strains. Apatites prepared by solid-state reaction showed unit cell volume dilation from 527.17 ų for copper-free HA to 533.31 ų for material of the putative composition Ca₁₀(PO₄)₆[Cu_0.8(OH)_0.4O_0.8] consistent with Cu⁺ insertion into the [001] hydroxyapatite channel. This was less pronounced (528.30 ų to 529.3 ų) in the corresponding wet chemical synthesised products, suggesting less complete Cu tunnel incorporation and partial tenancy of Cu in place of calcium. X-ray absorption spectroscopy suggests fast quenching is necessary to prevent oxidation of Cu⁺ to Cu²⁺. Raman spectroscopy revealed an absorption band at 630 cm⁻¹ characteristic of symmetric O-Cu⁺-O units tenanted in the apatite channel while solid-state ³¹P magic-angle-spinning nuclear magnetic resonance (MAS NMR) supported a vacancy-Cu⁺ substitution model within the apatite channel. The copper doping strategy increases antibacterial efficiency by 25% to 55% compared to undoped HA, with the finer particle sizes and greater specific surface areas of the wet chemical material demonstrating superior efficacy.

Strontium and Zinc Substitution in β-Tricalcium Phosphate: An X-ray Diffraction, Solid State NMR and ATR-FTIR Study

β-tricalcium phosphate (β-TCP) is one of the most common bioceramics, widely applied in bone cements and implants. Herein we synthesized β-TCP by solid state reaction in the presence of increasing amounts of two biologically active ions, namely strontium and zinc, in order to clarify the structural modifications induced by ionic substitution. The results of X-ray diffraction analysis indicate that zinc can substitute for calcium into a β-TCP structure up to about 10 at% inducing a reduction of the cell parameters, whereas the substitution occurs up to about 80 at% in the case of strontium, which provokes a linear increase of the lattice constants, and a slight modification into a more symmetric structure. Rietveld refinements and solid-state ³¹P NMR spectra demonstrate that the octahedral Ca(5) is the site of β-TCP preferred by the small zinc ion. ATR-FTIR results indicate that zinc substitution provokes a disorder of β-TCP structure. At variance with the behavior of zinc, strontium completely avoids Ca(5) site even at high concentration, whereas it exhibits a clear preference for Ca(4) site. The infrared absorption bands of β-TCP show a general shift towards lower wavenumbers on increasing strontium content. Particularly significant is the shift of the infrared symmetric stretching band at 943 cm⁻¹ due to P(1), that is the phosphate more involved in Ca(4) coordination, which further supports the occupancy preference of strontium.

Ion-substituted calcium phosphate coatings by physical vapor deposition magnetron sputtering for biomedical applications: A review

Coatings based on ion-substituted calcium phosphate (Ca-P) have attracted great attention in the scientific community over the past decade for the development of biomedical applications. Among such Ca-P based structures, hydroxyapatite (HA) has shown significant influence on cell behaviors including cell proliferation, adhesion, and differentiation. These cell behaviors determine the osseointegration between the implant and host bone and the biocompatibility of implants. This review presents a critical analysis on the physical vapor deposition magnetron sputtering (PVDMS) technique that has been used for ion-substituted Ca-P based coatings on implants materials. The effect of PVDMS processing parameters such as discharge power, bias voltage, deposition time, substrate temperature, and post-heat treatment on the surface properties of ion-substituted Ca-P coatings is elucidated. Moreover, the advantages, short comings and future research directions of Ca-P coatings by PVDMS have been comprehensively analyzed. It is revealed that the topography and surface chemistry of amorphous HA coatings influence the cell behavior, and ion-substituted HA coatings significantly increase cell attachment but may result in a cytotoxic effect that reduces the growth of the cells attached to the coating surface areas. Meanwhile, low-crystalline HA coatings exhibit lower rates of osteogenic cell proliferation as compared to highly crystalline HA coatings developed on Ti based surfaces. PVDMS allows a close reproduction of bioapatite characteristics with high adhesion strength and substitution of therapeutic ions. It can also be used for processing nanostructured Ca-P coatings on polymeric biomaterials and biodegradable metals and alloys with enhanced corrosion resistance and biocompatibility. STATEMENT OF SIGNIFICANCE: Recent studies have utilized the physical vapor deposition magnetron sputtering (PVDMS) for the deposition of Ca-P and ion-substituted Ca-P thin film coatings on orthopedic and dental implants. This review explains the effect of PVDMS processing parameters, such as discharge power, bias voltage, deposition time, substrate temperature, and post-heat treatment, on the surface morphology and crystal structure of ion-substituted Ca-P and ion-substituted Ca-P thin coatings. It is revealed that coating thickness, surface morphology and crystal structure of ion-substituted Ca-P coatings via PVDMS directly affect the biocompatibility and cell responses of such structures. The cell responses determine the osseointegration between the implant and host bone and eventually the success of the implants.

Microporous Coatings of PEKK/SN Composites Integration with PEKK Exhibiting Antibacterial and Osteogenic Activity, and Promotion of Osseointegration for Bone Substitutes

To improve the antibacterial and osteogenic activities of poly(etherketoneketone) (PEKK), concentrated sulfuric acid (H₂SO₄) suspension with silicon nitride (SN) microparticle was utilized to modify PEKK surface. Through sulfonation reaction, microporous coatings of PEKK/SN composites were created on PEKK surface, which were integrated with PEKK substrate. The results showed that the content of SN in the microporous coatings increased with the increase of SN content in H₂SO₄ suspension (PKS without SN, PKSC5 and PKSC10 with 5 and 10 wt % SN content in H₂SO₄) and that the surface roughness and hydrophilicity of microporous coatings on PEKK were significantly improved with the SN content increasing. In addition, the microporous coating of PKSC10 with high SN content exhibited excellent antibacterial activity due to the synergistic action of the presence of amino (-NH₂) and sulfonic acid (-SO₃H) groups as well as the improvement of protein absorption. Moreover, the microporous coating of PKSC10 obviously stimulated adhesion, proliferation, and osteogenic differentiation of rat bone mesenchymal stem cells. Furthermore, histological and push-out load evaluation indicated that the microporous coating of PKSC10 significantly promoted osteogenesis and osseointegration in vivo. The results suggested that the microporous coating of PKSC10 with high SN content display good biocompatibility, antibacterial and osteogenic activities, and osseointegration ability, which would have great potential for bone substitutes.

Toward an efficient antibacterial agent: Zn- and Mg-doped hydroxyapatite nanopowders

The use of synthetic hydroxyapatites (HAps) in biomedical and environmental applications is well warranted given that they have been shown to behave as an excellent bio-compatible material in human teeth and bones. In this paper, a series of HAps doped and co-doped with two metal cations (zinc and magnesium) has been successfully synthesized by means of the precipitation method using CaCl₂, Na₂HPO₄, ZnCl₂ and MgCl₂ aqueous solutions as reagents. The synthesized samples have been characterized using Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray fluorescence spectroscopy (XRF). All samples prepared using over 10 mol% of Zn and Mg ions were identified as HAp. However, the presence of metal cations caused a significant increase in their crystallite sizes (30-50 nm) along with the appearance of a second phase (scholzite, whitlockite). The XRF spectra indicated the presence of Ca, P, Zn and Mg in the powders prepared with a high Metal/P ratio (1.7-2). The antimicrobial activity of these nanopowders has been tested in vitro against five bacteria (Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa as Gram-negative; Staphylococcus aureus and Bacillus subtilis as Gram-positive) and two fungal strains (Candida albicans and Aspergillus niger). The outcomes revealed that these nanopowders exhibited strong antimicrobial activity, starting at 15 mol% of Zn and/or Mg.

Doping β-TCP as a Strategy for Enhancing the Regenerative Potential of Composite β-TCP-Alkali-Free Bioactive Glass Bone Grafts. Experimental Study in Rats

The present work aims at evaluating the potential gains derived from partially replacing calcium in resorbable β-tricalcium phosphate (β-TCP) by two different molar percentages of strontium (5, 10) and zinc (1, 2), concomitantly with a fixed molar percentage (0.5) of manganese. Synthetic granular composite bone filling grafts consisting of doped β-TCP and an alkali-free bioactive glass were prepared and implanted in ~4 mm diameter bone defects drilled in the calvaria of Wistar rats used as animal models. The animals were sacrificed after 9 weeks of implantation and the calvaria was excised. Non-manipulated bone was used as positive control, while empty defects were used as a negative control group. The von Kossa staining revealed an enhanced new bone formation with increasing doping levels, supporting the therapeutic effects exerted by the doping elements. The percentage of newly formed bone was similar when the defects were filled with autologous bone, BG (previous results) or 3TCP2/7BG, which indicates that the latter two are excellent candidates for replacement of autologous bone as bone regeneration material. This finding confirms that doping with suitable doses of therapeutic ions is a good strategy towards transposing the bone graft materials to biomedical applications in humans.

Biomineralization-Inspired Material Design for Bone Regeneration

Synthetic substitutes of bone grafts, such as calcium phosphate-based ceramics, have shown some good clinical successes in the regeneration of large bone defects and are currently extensively used. In the past decade, the field of biomineralization has delivered important new fundamental knowledge and techniques to better understand this fascinating phenomenon. This knowledge is also applied in the field of biomaterials, with the aim of bringing the composition and structure, and hence the performance, of synthetic bone graft substitutes even closer to those of the extracellular matrix of bone. The purpose of this progress report is to critically review advances in mimicking the extracellular matrix of bone as a strategy for development of new materials for bone regeneration. Lab-made biomimicking or bioinspired materials are discussed against the background of the natural extracellular matrix, starting from basic organic and inorganic components, and progressing into the building block of bone, the mineralized collagen fibril, and finally larger, 2D and 3D constructs. Moreover, bioactivity studies on state-of-the-art biomimicking materials are discussed. By addressing these different topics, an overview is given of how far the field has advanced toward a true bone-mimicking material, and some suggestions are offered for bridging current knowledge and technical gaps.

A multiscale investigation of mechanical properties of bio-inspired scaffolds

Finding a structural design which allows the scaffold to have a high porosity and large pore size while retaining high strength is essential. Here, a bio-inspired scaffold is designed based on the observed geometrical pattern of the apatite atomic crystal structure, and mechanical properties are compared with other common scaffold geometries. The bio-inspired scaffold design is proven superior using a multiscale computational approach, which combines density functional theory and finite element analysis to predict the stress reaction and substitution effects on the scaffolds. This study provides insight into better scaffold design using bio-inspired structures and the effect of substitutions.

Cationic Substitutions in Hydroxyapatite: Current Status of the Derived Biofunctional Effects and Their In Vitro Interrogation Methods

High-performance bioceramics are required for preventing failure and prolonging the life-time of bone grafting scaffolds and osseous implants. The proper identification and development of materials with extended functionalities addressing socio-economic needs and health problems constitute important and critical steps at the heart of clinical research. Recent findings in the realm of ion-substituted hydroxyapatite (HA) could pave the road towards significant developments in biomedicine, with an emphasis on a new generation of orthopaedic and dentistry applications, since such bioceramics are able to mimic the structural, compositional and mechanical properties of the bone mineral phase. In fact, the fascinating ability of the HA crystalline lattice to allow for the substitution of calcium ions with a plethora of cationic species has been widely explored in the recent period, with consequent modifications of its physical and chemical features, as well as its functional mechanical and in vitro and in vivo biological performance. A comprehensive inventory of the progresses achieved so far is both opportune and of paramount importance, in order to not only gather and summarize information, but to also allow fellow researchers to compare with ease and filter the best solutions for the cation substitution of HA-based materials and enable the development of multi-functional biomedical designs. The review surveys preparation and synthesis methods, pinpoints all the explored cation dopants, and discloses the full application range of substituted HA. Special attention is dedicated to the antimicrobial efficiency spectrum and cytotoxic trade-off concentration values for various cell lines, highlighting new prophylactic routes for the prevention of implant failure. Importantly, the current in vitro biological tests (widely employed to unveil the biological performance of HA-based materials), and their ability to mimic the in vivo biological interactions, are also critically assessed. Future perspectives are discussed, and a series of recommendations are underlined.

Molecular dynamics simulations of adsorption and desorption of bone morphogenetic protein-2 on textured hydroxyapatite surfaces

Interactions between bone morphogenetic protein-2 (BMP-2) and biomaterial surfaces are of great significance in the fields of regenerative medicine and bone tissue engineering. In this work, the adsorption and desorption behaviors of BMP-2 on a series of nano-textured hydroxyapatite (HAP) surfaces were systematically investigated by combined molecular dynamic (MD) simulations and steered molecular dynamic (SMD) simulations. The textured HAP surfaces exhibited nanostructured topographies and played a critical role in the mediation of dynamic behaviors of BMP-2. Compared to the HAP-flat model, the HAP-1:1 group (means ridge vs groove = 1:1) showed the excellent ability to capture BMP-2, less conformation change of BMP-2 molecule, and high cysteine-knot stability during the adsorption and desorption processes. These findings suggest that nano-textured HAP surfaces are more capable of loading BMP-2 molecules, and most importantly, they can help maintain a higher biological activity of BMP-2 cargos. In the present study, for the first time, we have deeply clarified the adsorption and desorption dynamics of BMP-2 on various nano-textured HAP surfaces at the atomic level, which can provide significant guidelines for the future design of BMP-2-based tissue engineering implants/scaffolds. STATEMENT OF SIGNIFICANCE: By using combined molecular dynamic (MD) simulations and steered molecular dynamic (SMD) simulations, the adsorption and desorption dynamics of bone morphogenetic protein-2 (BMP-2) dimer on a series of nano-textured hydroxyapatite (HAP) surfaces at the atomic level were presented in details for the first time. We have proved that the HAP-1:1 model (means ridge vs groove = 1:1) possessed excellent ability to capture BMP-2, less conformation change, and high cysteine-knot stability. As a result, the nano-textured topography of HAP-1:1 could maintain a relatively high biological activity of BMP-2 cargos. This work could provide theoretical guidelines for the design of BMP-2-based implants/scaffolds for bone tissue engineering.