3-D culture of human umbilical vein endothelial cells with reversible thermosensitive hydroxybutyl chitosan hydrogel

Role of Hydrophobic Associations in Self-Healing Hydrogels Based on Amphiphilic Polysaccharides

Self-healing hydrogels have the ability to recover their original properties after the action of an external stress, due to presence in their structure of reversible chemical or physical cross-links. The physical cross-links lead to supramolecular hydrogels stabilized by hydrogen bonds, hydrophobic associations, electrostatic interactions, or host-guest interactions. Hydrophobic associations of amphiphilic polymers can provide self-healing hydrogels with good mechanical properties, and can also add more functionalities to these hydrogels by creating hydrophobic microdomains inside the hydrogels. This review highlights the main general advantages brought by hydrophobic associations in the design of self-healing hydrogels, with a focus on hydrogels based on biocompatible and biodegradable amphiphilic polysaccharides.

Advances in Engineered Three-Dimensional (3D) Body Articulation Unit Models

Indeed, the body articulation units, commonly referred to as body joints, play significant roles in the musculoskeletal system, enabling body flexibility. Nevertheless, these articulation units suffer from several pathological conditions, such as osteoarthritis (OA), rheumatoid arthritis (RA), ankylosing spondylitis, gout, and psoriatic arthritis. There exist several treatment modalities based on the utilization of anti-inflammatory and analgesic drugs, which can reduce or control the pathophysiological symptoms. Despite the success, these treatment modalities suffer from major shortcomings of enormous cost and poor recovery, limiting their applicability and requiring promising strategies. To address these limitations, several engineering strategies have been emerged as promising solutions in fabricating the body articulation as unit models towards local articulation repair for tissue regeneration and high-throughput screening for drug development. In this article, we present challenges related to the selection of biomaterials (natural and synthetic sources), construction of 3D articulation models (scaffold-free, scaffold-based, and organ-on-a-chip), architectural designs (microfluidics, bioprinting, electrospinning, and biomineralization), and the type of culture conditions (growth factors and active peptides). Then, we emphasize the applicability of these articulation units for emerging biomedical applications of drug screening and tissue repair/regeneration. In conclusion, we put forward the challenges and difficulties for the further clinical application of the in vitro 3D articulation unit models in terms of the long-term high activity of the models.

Dual cure (thermal/photo) composite hydrogel derived from chitosan/collagen for in situ 3D bioprinting

In situ 3D printing technologies is a new frontier for highly personalized medicine, which requires suitable bioink with rheology, biocompatibility, and gelation kinetics to support the right shape and mechanical properties of the printed construct. To this end, a facile design of thermo/photo dual cure composite hydrogel was proposed using MHBC and soluble collagen in this study. M/C composite hydrogel exhibited rapid thermo-induced sol-gel transition and contraction, tunable mechanical properties, proper microstructure and biodegradability for 3D cell culture, as well as improve cyto-compatibility, all of which were dependent upon the methacrylation degree of MHBC and M/C ratios. The printability of the optimal formulation (3% MHBC/1% collagen) was validated by its mild printing condition, rapid gelation of bioink at 37 °C and simple postprocessing manipulation. Both desirable printability and cyto-compatibility enable M/C composite hydrogel a potential candidate as bioink to be applied for in situ 3D bioprinting.

Thermoresponsive polysaccharides with tunable thermoresponsive properties via functionalisation with alkylamide groups

Polysaccharides have been used widely in many industries, from food technology and mining to cosmetics and biomedical applications. Over recent years there has been growing interest in the development of responsive polysaccharides with unique and switchable properties, particularly systems that display lower-critical solution temperatures (LCSTs). Therefore, in this study we aimed to investigate a novel strategy that would allow the conversion of non-responsive polysaccharides into thermoresponsive polysaccharides with tuneable LCSTs. Through the functionalisation of dextran with alkylamide groups (isopropyl amide, diethyl amide, piperidinyl and diisobutyl amide) using a carbodiimide coupling approach in conjunction with amic acid derivatives, we prepared a library of novel dextrans with various degrees of substitution (DS), which were characterised via nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The alkylamide-functionalised dextrans were found to have good solubility in aqueous solutions, with the exception of those having a high DS of large hydrophobic substituents. Determination of the thermoresponsive characteristics of the polymer solutions via UV-vis spectroscopy revealed that the LCST of the alkylamide-functionalised dextrans was highly dependent on the type of alkylamide group and the DS and could be tuned over a large range (5-35 °C). Above the LCST, all of the thermoresponsive alkylamide-functionalised dextrans formed colloidal dispersions with particles sizes ranging from 400 -600 nm, as determined by dynamic light scattering (DLS). In addition, the polymers were found to exhibit a fast and reversible phase transition in solution with narrow hysteresis (∼ 1-5 °C). Finally, the injectability and biocompatibility of the novel thermoresponsive dextrans was confirmed in vivo via subcutaneous and intracranial ventricle injections, with no local or systemic toxicity noted over a 14 d period. Overall, the alkylamide-functionalised dextrans display interesting thermoresponsive properties and trends that may make them useful in biomedical applications, such as drug-delivery.

Three-Dimensional Culture System of Cancer Cells Combined with Biomaterials for Drug Screening

Simple Summary

For the research and development of drug discovery, it is of prime importance to construct the three-dimensional (3D) tissue models in vitro. To this end, the enhancement design of cell function and activity by making use of biomaterials is essential. In this review, 3D culture systems of cancer cells combined with several biomaterials for anticancer drug screening are introduced.

Abstract

Anticancer drug screening is one of the most important research and development processes to develop new drugs for cancer treatment. However, there is a problem resulting in gaps between the in vitro drug screening and preclinical or clinical study. This is mainly because the condition of cancer cell culture is quite different from that in vivo. As a trial to mimic the in vivo cancer environment, there has been some research on a three-dimensional (3D) culture system by making use of biomaterials. The 3D culture technologies enable us to give cancer cells an in vitro environment close to the in vivo condition. Cancer cells modified to replicate the in vivo cancer environment will promote the biological research or drug discovery of cancers. This review introduces the in vitro research of 3D cell culture systems with biomaterials in addition to a brief summary of the cancer environment.

Thermoresponsive Chitosan/DOPA-Based Hydrogel as an Injectable Therapy Approach for Tissue-Adhesion and Hemostasis

Chitosan (CS) hydrogels are widely used in wound hemostatic agents due to their superior biocompatibility, biodegradability, and hemostatic effect. However, most of them fail to achieve great hemostatic effect because of poor adhesion to bleeding tissues. Also, the conventional implantation surgery of hemostatic hydrogels to internal bleeding wounds may cause secondary trauma to the human body. In this work, catechol-hydroxybutyl chitosan (HBCS-C) has been designed and prepared by grafting hydroxybutyl groups and catechol groups to the CS backbones. The multifunctional HBCS-C hydrogels are fabricated with the properties of thermosensitivity, injectability, tissue-adhesion, biodegradation, biocompatibility, and wound hemostasis. They exhibit excellent liquid-gel transition at different temperatures, through the changes of hydrophilic-hydrophobic interaction and hydrogen bonds generating from hydroxybutyl groups. By the multiple interactions between catechol groups/amino groups and tissues, the biocompatible hydrogels can strongly adhere on the surface of tissue. To further study, the bleeding rat-liver models are made to evaluate the hemostatic effects. After injecting the hydrogel precursor solution into the rat body, the hydrogels are not only formed in situ within 30 s but are also firmly adhered to the bleeding tissues which shows effective hemostasis. The injectability and tissue-adhesion improvement in this study gives a new insight into hemostatic agents, and the multifunctional hydrogels have a great potential in the biomedical application.

Microcarriers for Upscaling Cultured Meat Production

Due to the considerable environmental impact and the controversial animal welfare associated with industrial meat production, combined with the ever-increasing global population and demand for meat products, sustainable production alternatives are indispensable. In 2013, the world's first laboratory grown hamburger made from cultured muscle cells was developed. However, coming at a price of $300.000, and being produced manually, substantial effort is still required to reach sustainable large-scale production. One of the main challenges is scalability. Microcarriers (MCs), offering a large surface/volume ratio, are the most promising candidates for upscaling muscle cell culture. However, although many MCs have been developed for cell lines and stem cells typically used in the medical field, none have been specifically developed for muscle stem cells and meat production. This paper aims to discuss the MCs' design criteria for skeletal muscle cell proliferation and subsequently for meat production based on three scenarios: (1) MCs are serving only as a temporary substrate for cell attachment and proliferation and therefore they need to be separated from the cells at some stage of the bioprocess, (2) MCs serve as a temporary substrate for cell proliferation but are degraded or dissolved during the bioprocess, and (3) MCs are embedded in the final product and therefore need to be edible. The particularities of each of these three bioprocesses will be discussed from the perspective of MCs as well as the feasibility of a one-step bioprocess. Each scenario presents advantages and drawbacks, which are discussed in detail, nevertheless the third scenario appears to be the most promising one for a production process. Indeed, using an edible material can limit or completely eliminate dissociation/degradation/separation steps and even promote organoleptic qualities when embedded in the final product. Edible microcarriers could also be used as a temporary substrate similarly to scenarios 1 and 2, which would limit the risk of non-edible residues.

Thermoresponsive polysaccharides and their thermoreversible physical hydrogel networks

Thermoresponsive polymers have been used extensively for various applications including food additives, pharmaceutical formulations, therapeutic delivery, cosmetics and environmental remediation, to mention a few. Many thermoresponsive polymers have the ability to form physical hydrogel networks in response to temperature changes, which are particularly useful for emerging biomedical applications, including cell therapies, drug delivery systems, tissue engineering, wound healing and 3D bioprinting. In particular, the use of polysaccharides with thermoresponsive properties has been of interest due to their wide availability, versatile functionality, biodegradability, and in many cases, inherent biocompatibility. Naturally thermoresponsive polysaccharides include agarose, carrageenans and gellan gum, which exhibit upper critical solution temperatures, transitioning from a solution to a gel state upon cooling. Arguably, this limits their use in biomedical applications, particularly for cell encapsulation as they require raised temperatures to maintain a solution state that may be detrimental to living systems. Conversely, significant progress has been made over recent years to develop synthetically modified polysaccharides, which tend to exhibit lower critical solution temperatures, transitioning from a solution to a gel state upon warming. Of particular interest are thermoresponsive polysaccharides with a lower critical solution temperature in between room temperature and physiological temperature, as their solutions can conveniently be manipulated at room temperature before gelling upon warming to physiological temperature, which makes them ideal candidates for many biological applications. Therefore, this review provides an introduction to the different types of thermoresponsive polysaccharides that have been developed, their resulting hydrogels and properties, and the exciting applications that have emerged as a result of these properties.

Thermoresponsive polysaccharide-based composite hydrogel with antibacterial and healing-promoting activities for preventing recurrent adhesion after adhesiolysis

Postoperative adhesions are very common complications after general abdominal surgery. Although adhesiolysis has been proven effective in eliminating the preexisting adhesions, the new trauma caused by surgical lysis can induce recurrent adhesion. The prevention of recurrent adhesion after adhesiolysis is more difficult because the injury is more severe and adhesion mechanism is more complicated compared with the primary adhesion. In this study, a thermoresponsive hydrogel contained galactose modified xyloglucan (mXG) and hydroxybutyl chitosan (HBC) was developed as a barrier device for recurrent adhesion prevention after adhesiolysis due to its injectability and spontaneous gelling behaviors at the body temperature without any chemical reactions or extra driving factors. First, mXG and HBC were synthesized via enzymatic modification and etherification reaction, respectively. Rheological measurements indicated that the mXG/HBC composite system showed excellent thermosensitivity properties, and their gelation temperature and time can be modulated via adjusting the mXG/HBC ratio. Moreover, the mXG/HBC hydrogel exhibited excellent cytocompatibility and hemocompatibility in vitro. Furthermore, the mXG/HBC hydrogel could promote wound healing in the rat skin wound model. Finally, the efficacy of the mXG/HBC composite hydrogel in the prevention of recurrent adhesion was evaluated in a more rigorous rat repeated-injury adhesion model. The results demonstrated that the composite hydrogel could not only effectively prevent recurrent adhesion after adhesiolysis, but also promote wound healing and reduce scare formation. These results suggested that the mXG/HBC composite hydrogel may be a promising candidate as an injectable anti-adhesion system for clinical applications.

STATEMENT OF SIGNIFICANCE

Although adhesiolysis has been proven effective in eliminating the preexisting adhesions, the new trauma caused by surgical lysis can induce recurrent adhesion. So far, most of the existing barrier systems and pharmacological approaches were developed for primary adhesion prevention while few attention has paid on prevention of recurrent adhesion after adhesiolysis. In the present study, we developed a thermoresponsive polysaccharide-based composite hydrogel by simple mixing galactose modified xyloglucan (mXG) and hydroxybutyl chitosan (HBC). The resulting mXG/HBC composite hydrogel not only was easy to handle and highly effective in preventing the recurrent adhesion after adhesiolysis, but also could promote wound healing and reduce scare formation. Our study provide an effective anti-adhesion system for preventing recurrent adhesion after adhesiolysis.

Development of a rapid in vitro tissue deadhesion system using the thermoresponsive sol-gel transition of hydroxybutyl chitosan

In regenerative medicine, it has become increasingly important to collect cultured tissues using non-invasive methods. Enzymatic deadhesion is normally used to collect cells, but this method cannot be used when trying to collect whole tissues in order to avoid damaging cell-cell interactions. In order to resolve this issue, a thermoresponsive culture dish with poly(N-isopropyl acrylamide) (PNIPAAm) has been employed. This system can change its hydrophobicity depending on temperature. Thus, tissues can attach above 37 °C and be detached below 20 °C. However, the PNIPAAm system has some issues related to cost and detachment time. In this study, we developed a novel thermoresponsive detachment system using a polysaccharide derivative. We chose hydroxy butyl chitosan (HBC) as the thermoresponsive polymer because of its high biocompatibility and rapid phase transition. We developed a novel method of HBC synthesis in conditions that were milder than previously reported. We used spin-coating to make a thin coating on two kinds of culture dishes with various concentrations of HBC solution. Seeded cells attached to the surface at less than 0.5 mg/ml HBC coating concentration, and they could be successfully detached by simply lowering the temperature of the suspension dishes without enzymatic treatment; the cells took only 5-20 min to detach. To evaluate this system, we measured three metrics related to cell culturing on culture dishes: initial attachment rate, detachment rate and tissue detachment time. The study revealed that tissues could be detached faster on the suspension dishes used in this study than on PNIPAAm grafted dishes when HBC was coated at 0.5 mg/ml. We successfully developed a novel tissue detachment system using HBC. These results suggest that smart polymers may be useful in regenerative medicine.

Investigation of gelling behavior of thiolated chitosan in alkaline condition and its application in stent coating

The gelling behaviors of thiolated chitosan (TCS) in alkaline condition were investigated. Thioglycolic acid was conjugated onto chitosan backbone through amide bond formation. The variations of thiol group content were monitored in presence of H2O2 or different pH values (pH 7.0, 8.0, 9.0) in dialysis mode. Different from the decreasing thiol group content upon time in acidic condition, increasing amount of thiol groups was detected in alkaline pH during 120 min dialysis attributed to alkaline hydrolysis of intra-molecular disulfide bonds. The extent of which was larger at higher pH values. Higher degree of thiolation, thiomer concentration or pH values promoted gelation of TCS. Entanglement and coagulation of chitosan molecule chains and re-arrangement of disulfide bonds acted closely and dynamically in the gelation process. Disulfide bonds, especially inter-molecular type, are formed by synergetic effects of thiol/disulfide interchange and thiol/thiol oxidation reactions. TCS coated vascular stent displayed wave-like microstructure of parallel ridges and grooves, which favored HUVECs adhesion and proliferation. The biocompatibility, peculiar morphology and thiol moieties of TCS as stent coating material appear application potential for vascular stent.

Hydroxybutyl Chitosan Polymer-Mediated CD133 Antibody Coating of Metallic Stents to Reduce Restenosis in a Porcine Model of Atherosclerosis

Antibody-coated stents to capture circulating endothelial progenitor cells (EPCs) for re-endothelialization appear to be a novel therapeutic option for the treatment of atherosclerotic disease. Hydroxybutyl chitosan (HBC), a linear polysaccharide made from shrimps and other crustacean shells, is biocompatible, nontoxic, and hydrophilic, making it ideal for biomedical applications. In this study, HBC was explored for the immobilization of anti-CD133 antibodies. We demonstrated that CD133 antibodies mediated by HBC were successfully coated on cobalt-chromium alloy discs and metal stents. The coating was homogeneous and smooth as shown by electronic microscopy analysis. Balloon expansion of coated stents did not cause cracking or peeling. The HBC discs promoted CD133+ EPCs and human umbilical vein endothelial cell growth in vitro. The CD133 antibody-coated but not bare discs bound CD133+ EPCs in vitro. Implantation of CD133 antibody-coated stents significantly inhibited intimal hyperplasia and reduced restenosis compared with implantation of bare stents in a porcine model of atherosclerosis. These findings suggest HBC is a valuable anchoring agent that can be applied for bioactive coating of stents and that CD133 antibody-coated stents might be a potential therapeutic alternative for the treatment of atherosclerotic disease.

Cell-laden photocrosslinked GelMA-DexMA copolymer hydrogels with tunable mechanical properties for tissue engineering

To effectively repair or replace damaged tissues, it is necessary to design three dimensional (3D) extracellular matrix (ECM) mimicking scaffolds with tunable biomechanical properties close to the desired tissue application. In the present work, gelatin methacrylate (GelMA) and dextran glycidyl methacrylate (DexMA) with tunable mechanical and biological properties were utilized to prepared novel bicomponent polymeric hydrogels by cross-linking polymerization using photoinitiation. We controlled the degree of substitution (DS) of glycidyl methacrylate in DexMA so that they could obtain relevant mechanical properties. The results indicated that copolymer hydrogels demonstrated a lower swelling ratio and higher compressive modulus as compared to the GelMA. Moreover, all of the hydrogels exhibited a honeycomb-like architecture, the pore sizes decreased as DS increased, and NIH-3T3 fibroblasts encapsulated in these hydrogels all exhibited excellent viability. These characteristics suggest a class of photocrosslinkable, tunable mechanically copolymer hydrogels that may find potential application in tissue engineering and regenerative medicine applications.