Insight into the mechanisms of combining direct current magnetic field with phosphate in promoting emulsifying properties of myofibrillar protein

This study investigated the combined effects of direct-current magnetic field (DC-MF, 9.5 mT) and tetrasodium-pyrophosphate (TSPP, 1-5 g/L) on emulsified gel properties of porcine myofibrillar protein (MP). Results showed that MP at DC-MF and 3 g/L TSPP had decreased spectrum intensity of UV and fluorescence compared to that without DC-MF, owing to the changes of MP tertiary structure caused by DC-MF, especially tryptophan and tyrosine. The emulsion treated with DC-MF behaved better emulsifying activity and stability than that without DC-MF under such condition. And emulsion had lower creaming index and better storage stability. Gels prepared by this MP emulsion had low porosity and stable structure, accompanying with smaller size and more uniform distribution of oil droplets. Microstructure images showed that gels were covered with microporous structure, which was conducive to the good WHC of the emulsified gels (97.12%). These results showed the feasibility of DC-MF and TSPP in improving MP emulsion/emulsified gel.

Effect of vegetable oils on the thermal gel properties of PSE-like chicken breast meat protein isolate-based emulsion gels

To enhance the gel properties of PSE (pale, soft, and exudative)-like chicken meat protein isolate (PPI), the effect of peanut, corn, soybean, and sunflower oils on the gel properties of PPI emulsion gels was investigated. Vegetable oils improved emulsion stability and gel strength and enhanced viscosity and elasticity. The gel strength of the PPI-sunflower oil emulsion gel increased by 163.30 %. The thermal denaturation temperature and enthalpy values were increased. They decreased the particle size of PPI emulsion (P < 0.05) and changed the three-dimensional network structure of PPI emulsion gels from reticular to sheet with a smooth surface and pore-reduced lamellar. They elevated the content of immobile water PPI emulsion gels, decreased the α-helix and β-turn, and increased the β-sheet and random coil. Vegetable oil improved the gel properties of PPI in the following order: sunflower oil > soybean oil > corn oil ≈ peanut oil > control group.

A novel approach has been developed to produce pure plant-based gel soy yogurt by combining soy proteins (7S/11S), high pressure homogenization, and glycation reaction

This research sought to examine how the physicochemical characteristics of soy globulins and different processing techniques influence the gel properties of soy yogurt. The goal was to improve these gel properties and rectify any texture issues in soy yogurt, ultimately aiming to produce premium-quality plant-based soy yogurt. In this research study, the investigation focused on examining the impact of 7S/11S, homogenization pressure, and glycation modified with glucose on the gel properties of soy yogurt. A plant-based soy yogurt with superior gel and texture properties was successfully developed using a 7S/11S globulin-glucose conjugate at a 1:3 ratio and a homogenization pressure of 110 MPa. Compared to soy yogurt supplemented with pectin or gelatin, this yogurt demonstrated enhanced characteristics. These findings provide valuable insights into advancing plant protein gels and serve as a reference for cultivating new soybean varieties by soybean breeding experts.

Effects of different temperatures on the physicochemical characteristics, microstructure and protein structure of preserved egg yolk

To clarify the mechanism of lower temperatures promoted the solidification of preserved egg yolk, the effects of temperature (4 °C, 10 °C and 25 °C) on the physicochemical properties, microstructure and protein structure of preserved egg yolk were studied. Results showed that the exterior egg yolk (EEY) exhibited higher pH, hardness and free sulfhydryl content at low-temperature pickling. The microstructure showed that the EEY gradually formed a denser gel network structure at lower temperatures. Electrophoresis results and Fourier transform infrared spectroscopy (FTIR) indicated that there were different degrees of protein degradation and cross-linking of proteins in the IEY (the interior egg yolk) and EEY and the decrease of β-sheets in the secondary structure was accompanied by an increase of β-turns during the formation of egg yolk gels. These results indicated that egg yolk solidification was faster and denser gel structure at 4 °C and 10 °C.

Effects of heat treatment at different moisture of mung bean flour on the structural, gelation and in vitro digestive properties of starch

Effects of heat treatment (100 °C) at different moisture content (13-70 %) on the structural, gelation and digestive properties of starch in real mung bean flour (MBF) systems are investigated. The results showed that the structural destruction of the starch, the starch-lipid complexion and starch-protein interaction were promoted with increasing moisture content. The starch-protein interaction was mainly driven by hydrophobic interaction forces, leading the increase of total phase transition enthalpy. Even though starch retained ordered structure after heating at 50 %-70 % moisture, the typical pasting curve almost disappeared. The less leached amylose to construct the continuous phase, and more flexible amylopectin swollen granules dispersed in the matrix may weakened the viscoelasticity of the gels. As a result, two distinct gel textures were presented: soft solids with good water-binding capacity (below 30 %) and pasty fluids (above 40 %). Starch-lipid/protein interactions were demonstrated to retard the digestion rate of starch during MBS gelatinization according to the two-stage first-order kinetic and LOS (logarithm of the slope) models.

Threading the needle: Achieving simplicity and performance in cellulose alkanoate ω-carboxyalkanoates for amorphous solid dispersion

Most active pharmaceutical ingredients (APIs) suffer from poor water solubility, often keeping them from reaching patients. To overcome the issues of poor drug solubility and subsequent low bioavailability, amorphous solid dispersions (ASDs) have garnered much attention. Cellulose ester derivatives are of interest for ASD applications as they are benign, sustainable-based, and successful in commercial drug delivery systems, e.g. in osmotic pump systems and as commercial ASD polymers. Synthesis of carboxy-pendant cellulose esters is a challenge, due in part to competing reactions between carboxyls and hydroxyls, forming ester crosslinks. Herein we demonstrate proof-of-concept for a scalable synthetic route to simple, yet highly promising ASD polymers by esterifying cellulose polymers through ring-opening of cyclic succinic or glutaric anhydride. We describe the complexity of such ring-opening reactions, not previously well-described, and report ways to avoid gelation. We report synthesis, characterization, and preliminary in vitro ASD evaluations of fifteen such derivatives. Synthetic routes were designed to accommodate these criteria: no protecting groups, no metal catalysts, mild conditions with standard reagents, simple purification, and one-pot synthesis. Finally, these designed ASD polymers included members that maintained fast-crystallizing felodipine in solution and release it from an ASD at rather high 20 % drug loading (DL).

Rheology and gelation of aqueous carboxymethylated curdlan solution: Impact of the degree of substitution

Curdlan is a unique (1,3)-β-D-glucan with bioactivity and exceptional gelling properties. By chemical functionalization such as carboxymethylation, the physicochemical properties of curdlan can be significantly tailored. However, how the carboxymethylation extent of curdlan affects its rheology and gelation characteristics has yet to be fully understood. Herein, we investigated the impact of the degree of substitution (DS, ranging from 0.04 to 0.97) on the rheological and gelation behavior of carboxymethylated curdlan (CMCD). It was found that CMCD with DS below 0.20, resembling native curdlan, still retained its gelling capability. As the DS increased beyond 0.36, there was a significant increase in its water solubility instead of gelation, resulting in transparent solutions with steady/complex viscosities adhering to the Cox-Merz rule. Moreover, CMCD with high DS demonstrated the ability to undergo in-situ gelation in the presence of metal ions, attributed to the nonspecific electrostatic binding. Additionally, in vitro cytocompatibility testing showed positive compatibility across varying DS in CMCD. This research offers a holistic understanding of the viscosifying and gelling behaviors of CMCD with varying DS, thereby fostering their practical application as thickeners and gelling agents in fields ranging from food and biomedicine to cosmetics and beyond.

Synergistic effects of microbial transglutaminase and apple pectin on the gelation properties of pea protein isolate and its application to probiotic encapsulation

The low gelation capacity of pea protein isolate (PPI) limits their use in food industry. Therefore, microbial transglutaminase (MTG) and apple pectin (AP) were combined to modify PPI to enhance its gelling characteristics, and the mechanism of MTG-induced PPI-AP composite gel generation was investigated. PPI (10 wt%) could not form a gel at 40 °C, while MTG-treated PPI (10 wt%) formed a self-supporting gel at 40 °C. Subsequently, the addition of AP further promoted the crosslinking of PPI and significantly improved the water holding capacity, rheology, and strength of PPI gels, which was attributed to both hydrogen and isopeptide bonds in the composite gel. Additionally, the PPI-AP composite gel showed excellent protection ability, and the survival rate of probiotics could reach over 90%, which could be used as an effective delivery system. This study verified that MTG and AP were efficient in enhancing the functional quality of PPI gels.

Legume milk-based yogurt mimetics structured using glucono-δ-lactone

The potential to produce protein-structured vegan yogurts with legumes was explored to offer an alternative to conventional polysaccharide-based varieties. Glucono-δ-lactone (GDL) was employed as a slow acidifying agent and was investigated for its ability to generate cold-set, yogurt-like gels using soy and lentil milks made using minimal processing steps. Soy (5.3 % protein) and lentil (6.1 % protein) milks were successfully gelled by GDL at concentrations of 0.5 % and 1 % w/w. Soy and lentil milks experienced similar acidification profiles and demonstrated good fits with double-exponential decay models. The physical properties of these legume gels were evaluated and compared to a commercial stirred dairy yogurt. Penetration tests were carried out on intact gels, then repeated after stirring. All intact soy samples demonstrated significantly stronger gel structures compared to the commercial yogurt, and most experienced greater amounts of brittleness. Results showed that the stirring of gels caused a notable decrease in firmness and brittleness in the soy gels, making them more similar to the control. Power-law modelling of viscosity curves demonstrated that all samples experienced non-Newtonian flow behavior (n < 0.29). Susceptibility to syneresis was measured by the degree of liquid loss following centrifugation. The optimization of protein type and GDL concentration to replicate the physical properties of dairy-based yogurts can enhance their consumer acceptance and provide a more customizable and controlled approach alternative to traditional fermentation methods.

Changes in the pasting and rheological properties of wheat, corn, water caltrop and lotus rhizome starches by the addition of Annona montana mucilage

Annona montana mucilage (AMM) is a novel mucilage with unique but limited information. This study investigated the effects of AMM addition on the pasting and rheological properties of wheat starch (WS), corn starch (CS), water caltrop starch (WCS), and lotus rhizome starch (LRS). The addition of AMM generally increased the pasting temperature and peak viscosity, but reduced the setback value of all starches to varying degrees, and the initiation of viscosity-increase for cereal starch/AMM systems during pasting occurred at lower temperatures, accompanied with a distinctive two-stage swelling process as well as lower peak and final hot paste viscosity at 50 °C. AMM significantly increased the pseudoplasticity and entanglement of the systems to varying degrees (LRS > WS > WCS > CS). Under a constant shear rate of 50 s-1, the consistency level was found to fall in honey-like for cereal starch/AMM groups, and honey-like to extremely thick levels for WCS and LRS/AMM groups. Except for the WCS/AMM systems, the storage and loss modulus as well as tan increased with increasing AMM concentration. Short-term retrogradation of starch at 4 °C was pronouncedly retarded by the addition of AMM for WS, CS and WCS groups, but was less affected for LRS group.

Modulating the texture of heat-set gels of phosphorylated walnut protein isolates through Glucono-δ-lactone acidification

The gelation of walnut protein isolates has not been extensively studied, mainly due to their inherent poor dispersity. This study investigated the gelation of alkaline-extracted walnut protein isolates (AWPI) and phosphorylated walnut protein isolates (PWPI) induced by heat treatment with glucono-δ-lactone (GDL) acidification, focusing on the impact of GDL concentrations on microstructure, rheology, and texture of the resulting gels. The PWPI gel exhibited lower hardness but a smoother structure than the AWPI gel. Notably, acidification with GDL (0.6-1.2%) significantly increased the stiffness of PWPI gels, increasing storage modulus and yield stress 10-50 times, while weakening AWPI gels. Varying concentrations of GDL effectively modulated the microstructure of the PWPI gels, leading to the altered texture (from a soft-solid state to a well-self-supporting stiff-solid gel) and water holding capacity (from approximately 46% to 85%). Additionally, hydrophobic interactions and disulfide bonds were identified as the primary forces involved in the gels.

Acid-induced pea protein gels pretreated with media milling: Gelling properties and the formation mechanism

This study explored the effect of stirred media mill (SMM) processing on the acid-induced gelling properties of pea protein. Results showed that SMM treatment enhanced the gel strength from 75.06 g to 183.89 g and increased the water holding capacity from 46.64 % to 73.50 %. The minimum gelation concentration achieved for SMM-treated pea protein was 4 %, significantly lower than that of heat-pretreated pea protein (9 %). SMM decreased protein aggregate size from 104 μm to 180 nm. Microscopy analysis revealed that the small aggregates facilitated the formation of uniform gel networks with tight connections. Linear rheology indicated that small protein aggregates resulted in slower gelation rates with a higher G' for the formed gels. The SMM-pretreated protein gel showed strain hardening, shear thinning behaviors, and satisfactory stability to withstand large-amplitude oscillatory shear. Overall, SMM emerges as a promising technology for producing protein gel products with strong mechanical attributes and customizable rheological properties.

Exploring xylitol as a low-salt alternative for effective inhibition of gelation in frozen egg yolks

Xylitol and NaCl were studied as alternative inhibitors of gelation in frozen egg yolks, considering the current dietary preference for low salt and low sucrose intake. The effects of different ratios of xylitol and NaCl on gelation were investigated. Compared to the control group, all treatment groups showed decreased egg yolk particle size and turbidity, increased solubility, surface hydrophobicity, λmax, and fluorescence intensity, reduced loss of free water, and enhanced yolk fluidity. The addition of xylitol and NaCl effectively prevented ice crystal growth, minimized protein denaturation caused by water loss, and formed complexes with proteins and water lost during freezing, thereby inhibiting the aggregation of protein molecules and the formation of gels. This study presents a novel and healthier strategy for inhibiting gelation of frozen egg yolk using xylitol and NaCl.

Phase transition and gelation in cellulose nanocrystal-based aqueous suspensions studied by SANS

HYPOTHESIS

Aqueous suspensions of cellulose nanocrystals (CNC) form a re-entrant liquid crystal (LC) phase with increasing salinity. Phase separation occurs in this LC state leading to a biphasic gel with a flow programmable structure that can be used to form anisotropic soft materials. We term this state a Liquid Crystal Hydroglass (LCH). Defining the mechanisms by which the LCH forms requires detailed structural analysis at the mesoscopic length scale.

EXPERIMENTS

By utilising Small Angle Neutron Scattering (SANS), we investigated the microstructure transitions in CNC suspensions, with a particular focus on the unique LC re-entrancy and gelation into the biphasic LCH.

FINDINGS

Scattering from LCH gels comprises contributions from a dispersed liquid state and static heterogeneity, characterised using a Lorentzian-Gaussian model of inhomogeneity. This conceptually supports a gelation mechanism (spinodal decomposition) in CNC suspensions towards a biphasic structure of the LCH. It also demonstrates that, with increasing salinity, the non-monotonic variation in effective volume fraction of CNC rods fundamentally causes the LC re-entrancy. This work provides the first experimental characterisation of the LC-re-entrancy and formation of an anisotropic LCH gel. The proposed mechanism can be extended to understanding the general behaviour of anisotropic colloids.

Ultrarapid Gelation of Porous Ti3C2Tx MXene Monoliths Induced by Ionic Liquids

Gelation is a promising method to assemble 3D macroscopic structures from MXene sheets for various applications. However, the fine control and scalable manufacturing of 3D MXene monoliths remains a great challenge. Herein, the controllable gelation of Ti3C2Tx MXene initiated by various ionic liquids (ILs) is first proposed, where the IL serve as linkers to bond the nanosheets together through electrostatic and hydrogen bonding interactions, forming 3D monoliths with well-adjustable structure. Furthermore, density functional theory calculations and experiments further reveal the cross-linking effect of different ILs. Typically, 3D porous structure with high specific surface area, suitable pore size, and improved electrolyte affinity is designed through the cross-linking of Ti3C2Tx with 1-vinyl-3-ethylimidazole bromide ([C2VIm]Br-Ti3C2Tx). Due to the strong coupling, the as-synthesized monolith possesses excellent rate performance and high energy density. The methodology is quite flexible, controllable, and universal that provides a new perspective for promoting innovative applications of 2D materials.

The extraction of buckwheat protein and its interaction with kappa-carrageenan: Textural, rheological, microstructural, and chemical properties

Current plant-based foods use plant proteins as a key structuring and texturing ingredient. The use of water for extraction can replace conventional protein extraction methods. Water extraction of protein is environmentally friendly and could prevent the loss of protein functionality due to extreme pH changes. This study demonstrates an aqueous extraction method, coupled with ultrasound as pre-treatment, to obtain buckwheat protein (BWPE) and assess its gelling property and composited gel with kappa-carrageenan (k-carr). Textural and rheological analyses showed that the hardness and storage modulus of the composited gel containing 1 % w/w BWPE and 1 % w/w k-carr was 4.2-fold and 100-fold, respectively, higher than k-carr gel at 1 % w/w. Light microscopy showed a mixed bi-continuous gel system, with k-carr reinforcing the protein gel network. Besides volume exclusion effects, chemical bond and FTIR analyses revealed that adding k-carr to BWPE altered the protein's secondary structure and mediated protein denaturation during heating. This results in greater β-sheet content, which creates a more organised gel structure. These results demonstrated that ultrasound-assisted water-extracted BWPE, together with varying concentrations of k-carr, can be used to develop composited gels of tailorable textural and rheological properties to suit different food applications.

In situ sono-rheometric assessment of procaine-loaded calcium pectinate hydrogel for enhanced drug releasing under ultrasound stimulation

Ultrasound (US) triggered alterations in the viscoelastic behavior of the procaine-loaded ionically gelatinized pectin hydrogel matrix, and drug release was observed using a sono-device rheometer. The gel softened immediately upon activation of the ultrasound operated at 43 kHz and remained in a softened state throughout the irradiation. Upon cessation of ultrasound, the gel promptly reverted to its original hardness. This cycle of softening was consistently observed in ionically crosslinked pectin hydrogels, resulting in the promotion of procaine release, particularly with higher US power and lower calcium concentration. As the amount of loaded procaine increased, the gel weakened due to ion exchange with the calcium crosslinker and procaine. The most substantial release efficiency, reaching 82 % with a concentration of 32 μg/ml, was achieved when the hydrogels contained 0.03 % procaine within the gelatinized hydrogel medicine at a calcium concentration of 0.9 M, representing a six-fold increase compared to that without US. Notably, US exposure affected the 3D porous structure and degradation rate, leading to hydrogel collapse and facilitating medicine release. Additionally, the procaine-loaded pectin hydrogels with 0.9 M calcium exhibited improved fibroblast cell viability, indicating non-toxicity compared to those hydrogels prepared at a higher Ca2+ concentration of 2.4 M.

Plasticizer-gelatin mixed solutions as skin protection materials with flexible-film-forming capability

To demonstrate the feasibility of plasticizer-gelatin solutions as novel skin protection materials from a physical aspect, we evaluated the rheological properties of the solutions and the mechanical properties and textures of their dried sheets and films. Three types of sugars and polyols were employed as organic plasticizers and mixed with gelatin in solutions at plasticizer/gelatin weight ratios of 0.13-1.67. The plasticizers minimally affected the viscosities and gelation temperatures of the gelatin solutions, but they remarkably softened dried gelatin sheets, except for propylene glycol. Glycerol exhibited the best plasticizing effects, but the sheets obtained using glycerol showed tacky textures. Preliminary investigations on the film-forming properties of the solutions on the human skin showed that the fructose-gelatin solution at a weight ratio of 1.0 formed a flexible thin film with a texture and mechanical properties similar to those of a commercially available polyurethane-based flexible film dressing. In terms of physical properties, we conclude that the fructose-gelatin solution has potential as a skin protection material that transforms from a solution to a film on the skin.

Assembly of soy protein-corn starch composite gels by thermal induction: Structure, and properties

The effect of different corn starch (CS) concentrations on the gel formation of soybean isolate protein (SPI) was investigated. Moreover, the texture, rheological properties of the gel were determined, and the spatial structure and interactions of the composite gel system were analyzed. The composite system transitioned from liquid to solid-like with an increase in the CS concentration and did not backflow when inverted for 24 h. With the addition of CS, the gel strength, water holding capacity (WHC), G', and G'' increased significantly. The maximum was reached at 10 % starch concentration with gel strength of (228.96 ± 29.86) g and WHC of (98.93 ± 2.02)  %. According to low-field 1H nuclear magnetic resonance (LF-NMR) results, CS has a high water absorption capacity, which improved the WHC. The scanning electron microscopy results revealed that composite gels with a high CS concentration had a more dense and small void network structure. According to the results of molecular force interaction, infrared spectroscopy, Raman spectroscopy, and free sulfhydryl group analysis, the added starch promoted the unfolding of SPI molecules, exposure of hydrophobic groups, transformation of free sulfhydryl groups into disulfide bonds, and hydrogen bond formation. Hydrophobic interactions, disulfide bonding, and hydrogen bonding function together to form the SPI-CS composite gel system. The study results provide the basis for applying soy protein and CS gels.

Beef protein ingredients from fat rendering process are promising functional ingredients

The valorization of co-products may be a promising way to meet the dual challenge of increasing global food resources and sustainability of food systems. In particular, meat co-products may be nutritionally interesting protein resources, if they offer functional properties in accordance with food applications. In that aim, two bovine co-products, resulting from the fat rendering process, have been characterized, regarding the protein solubility, gelling, and emulsifying properties. The effect of protein concentration, pH variation and NaCl addition on these properties was tested. Despite an effect of the ionic strength on the protein solubility of the two ingredients, a little or no significant impact was observed on the functionalities. Similarly, the functional properties were scarcely affected by pH. In the end, the protein concentration has proven to be the only important parameter, which points to an easy utilization of these ingredients in many food conditions.

Constructing a strongly interacting Pea-Cod binary protein system by introducing metal cations toward enhanced gelling properties

Developing prospective plant-animal binary protein systems with desirable nutritional and rheological properties stands as a significant and challenging pursuit within the food industry. Our understanding of the effect of adding salt on the aggregation behavior of food proteins is currently based on single model protein systems, however, this knowledge is rather limited following binary protein systems. Herein, various ionic strength settings are used to mitigate the repulsive forces between pea-cod mixed proteins during the thermal process, which further benefits the construction of a strengthened gel network. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) collectively demonstrated that larger heat-induced protein aggregates were formed, which increased in size with higher ionic strength. In the presence of 2.5 mM CaCl2 and 50 mM NaCl, the disulfide bonds significantly increased from 19.3 to 27.53 and 30.5 μM/g, respectively. Notably, similar aggregation behavior could be found when introducing 2.5 mM CaCl2 or 25 mM NaCl, due to the enhanced aggregation tendency by specific binding of Ca2+ to proteins. With relevance to the strengthened cross-links between protein molecules, salt endowed composite gels with preferable gelling properties, evidenced by increased storage modulus. Additionally, the gelling temperature of mixed proteins decreased below 50 °C at elevated ionic strength. Simultaneously, the proportion of network proteins in composite gels increased remarkably from 82.05 % to 93.61 % and 92.31 % upon adding 5.0 mM CaCl2 and 100 mM NaCl, respectively. The findings provide a valuable foundation for designing economically viable and health-oriented plant-animal binary protein systems.

Effect of the gelling mechanism on the physical properties of bigels based on whey protein isolate

The effect of the cold-set and heat-set gelling mechanism of whey protein isolate on bigel production was assessed. For this purpose, hydrogel phase was produced with whey protein isolated (10 % w/v) and for oleogel sunflower oil and glycerol monostearate (7.5 % w/v) were used. Bigels were produced by hot emulsification of different hydrogel:oleogel ratios (from 90:10 up to 10:90). For cold-set bigels (CSB) NaCl (200 mM) was added to the aqueous phase prior to the emulsification and the emulsion was cooled to promote the 3D network formation. On the other hand, heat-set bigels (HSB) were produced by heating the emulsion (80 °C, 60 min). Bigels were evaluated through microscopy, FTIR, thermal and texture analyzes. Results showed that depending on the hydrogel:oleogel ratio and gelling mechanism different structures organization were obtained. CSB were more organized, showing that the rate of gelation was the mechanism responsible for the structure. However, for HSB the heat treatment destabilized the emulsion and disorganized structures were observed for high oleogel content. FTIR corroborates the visual observation and showed that the arrangement was purely physical. In addition, the structural arrangement led to different mechanical properties. In general, HSB produced gels with rubber-like behavior, higher elasticity modulus and the presence of a breaking point. In contrast, CSB behaves as squeezing gel, with no breaking point and lower values of elasticity modulus. Moreover, for O/W bigels the dispersed oleogel particles disrupted the WPI network decreasing the gel strength in comparison to pure hydrogels. However, for systems where oleogel was the continuous phase, the gel strength was recovered due to the metastable and dynamic character of these systems. Thus, results showed that the gelling mechanism of the protein exerted an effect on the physical properties of bigels. In addition, the mechanical properties also can be modulated according to the bigel composition, allowing its application in products with different sensorial characteristics.

Characterization of a low-methoxyl pectin extracted from red radish (Raphanus sativus L.) pomace and its gelation induced by NaCl

There is an increasing demand for obtaining pectin from new sources. Red radish (Raphanus sativus L.) pomace pectin extracted by alkali was low-methoxyl pectin with esterification degree of 10.17 %, galacturonic acid content of 69.71 % (wt), and average molar weight of 78.59 kDa. The pectin primarily consisted of rhamnogalacturonan I and homogalacturonan domains. The predominant monosaccharides of the pectin were galacturonic acid (46.32 mol%), arabinose (16.03 mol%), galactose (10.46 mol%), and rhamnose (10.28 mol%), respectively. The red radish pomace pectin solution exhibited a shear-thinning behavior. NaCl could induce gelation of red radish pomace pectin, and the gel properties of red radish pomace pectin were considerably affected by the NaCl concentration. As the NaCl concentration (0.25-0.50 mol/L) increased, the rate of gelation accelerated, and the time to gelation point appeared earlier. There was an optimal NaCl concentration (0.50 mol/L) for the pectin to form a gel with the greatest solid-like properties, gel hardness (33.84 g) and water-holding capacity (62.41 %). Gelation force analysis indicated gel formation mainly caused by electrostatic shielding effect of Na+ and hydrogen bonding. This research could facilitate the applications of the red radish pomace pectin in the realm of edible hydrocolloids.

Strong gelation capacity of a pectin-like polysaccharide in the presence of K+ ion

In the present study, a pectin-like apple polysaccharide (AP) obtained by metal precipitation technique was demonstrated to show strong gelling capacity in the presence of K+ ion upon cooling. Increasing amount of K+ addition monotonically promoted the gelation of AP, as characterized by the increased gelation temperature (Tgel), gel melting temperature (Tmelt) and the gel strength. Compared with K+ ion, Na+ was unable to induce AP gelation even at high ionic concentrations, but other monovalent cations (Rb+, Cs+) can induce the gelation as in the case of K+ addition. At room temperature, the minimum cationic concentration as required to induce AP gelation followed the order of K+ ≈ Cr+ (8 mM) > Rb+ (3.5 mM), indicating that cationic radius (Na+ < K+ < Rb+ < Cs+) played a dominant role in inducing AP gelation, but other factors may also be involved. Finally, the gelation behavior of AP in the presence of K+ was explained as the suppressed intermolecular electrostatic repulsion between AP chains due to the strong electrostatic shielding effect of K+, which led to the formation of a gel network mediated by intermolecular hydrogen bonding. This reported gelation property may allow AP to find application as a new gelling polysaccharide.

Influence of pectin domains and protein on the viscosity and gelation properties of alkali-extracted pectin from green tea residue

Alkaline pectin extract (APE) from green tea residues has lower viscosity and gelation properties than commercial citrus pectin. To improve the viscosity and gelation properties of APE, four treatments, namely degradation of homogalacturonan (HG) or rhamnogalacturonan (RG) I domains, esterification, and protein removal and degradation, were applied. With proper degradation of the HG or RG I domains (arabinan or galactan), the viscosity of APE increased from 12 to 2.5×104 or 5.0×103 mPa·s, respectively, and the numbers further increased by approximately 500 times with the addition of Ca2+. Other treatments had slight effects on APE viscosity. The strongest gel (G' = 6.7 × 103 Pa and G″ = 930 Pa) was made using the polygalacturonase treated APE with Ca2+ addition. Degradation of the HG domain or protein enhanced APE's self-crosslink effect, while all methods except protein degradation improved the calcium bridging effect, potentially improving the market potential of pectin from biowaste.

Synthesis and characterization of pH-responsive conducting polymer/Na-alginate/gelatin based composite hydrogels for sustained release of amoxicillin drug

Composite hydrogels of Na-Alginate (Na-ALG) and Gelatin (GEL) with conducting polymers (CPs) were synthesised using poly(o-phenylenediamine) (POPD), polyaniline (PANI), poly(1-naphthylamine (PNA) and poly(vinylenedine fluoride) (PVDF). The synthesised hydrogels were characterized using FTIR, scanning electron microscopy (SEM) rheology, swelling ability and in-vitro drug release characteristics. The purpose of this investigation was to determine whether these hydrogels could be used to deliver antibiotics for extended drug release. The composite hydrogels were loaded with antibiotic drug: amoxicillin in three different concentrations and the release was studied at intestinal fluid (pH 7.4) and gastric fluid (pH 1.2). Release kinetics was found to show best fit in zero order models at both pH values and showed prolonged release characteristics. The POPD-Na-ALG/GEL showed highest release at intestinal pH of 7.4, while PVDF-Na-ALG/GEL showed highest release at gastric pH at 1.2.

Alginate-metal cation interactions: Macromolecular approach

Alginates are a broad family of linear (unbranched) polysaccharides derived from brown seaweeds and some bacteria. Despite having only two monomers, i.e. β-d-mannuronate (M) and its C5 epimer α-l-guluronate (G), their blockwise arrangement in oligomannuronate (..MMM..), oligoguluronate (..GGG..), and polyalternating (..MGMG..) blocks endows it with a rather complex interaction pattern with specific counterions and salts. Classic polyelectrolyte theories well apply to alginate as polyanion in the interaction with monovalent and non-gelling divalent cations. The use of divalent gelling ions, such as Ca2+, Ba2+ or Sr2+, provides thermostable homogeneous or heterogeneous hydrogels where the block composition affects both macroscopic and microscopic properties. The mechanism of alginate gelation is still explained in terms of the original egg-box model, although over the years some novel insights have been proposed. In this review we summarize several decades of research related to structure-functionships in alginates in the presence of non-gelling and gelling cations and present some novel applications in the field of self-assembling nanoparticles and use of radionuclides.

Dual regulations on texture and water mobility of shrimp surimi gel with sustained-release epigallocatechin-3-gallate in γ-cyclodextrin metal organic frameworks: Insights into functionality and mechanisms

Epigallocatechin-3-gallate (EGCG) could demonstrate crosslinking effects on myofibrillar proteins, yet its proneness to self-aggregation could bring excessive crosslinking and water loss within gels, hindering its application as an additive during thermal gelation process. Here, encapsulation with the γ-cyclodextrin metal organic framework (γ-CD-MOF) before the use of EGCG was found to play a dual role: alleviating over-crosslinking of proteins and elevating water retention within gels. Results showed that EGCG got a sustainable release throughout the thermal process due to the gradual fracture of O-K coordinate bounds and structural collapse of γ-CD-MOF. Mechanism insights revealed that the use of EGCG loaded γ-CD-MOF (EGCG@γ-CD-MOF) could regulate formation efficiency on disulfide bounds and promote protonation transition of the amino groups in proteins. Moreover, EGCG@γ-CD-MOF brought a higher retention of phenols within gels through preventing oxidative transformation of phenols towards quinones, which were verified to display a higher affinity towards myosin via molecular calculations.

Hydrogels for Cardiac Restorative Support: Relevance of Gelation Mechanisms for Prospective Clinical Use

PURPOSE OF REVIEW

Cardiac tissue regenerative strategies have gained much traction over the years, in particular those utilizing hydrogels. With our review, and with special focus on supporting post-myocardial infarcted tissue, we aim to provide insights in determining crucial design considerations of a hydrogel and the implications these could have for future clinical use.

RECENT FINDINGS

To date, two hydrogel delivery strategies are being explored, cardiac injection or patch, to treat myocardial infarction. Recent advances have demonstrated that the mechanism by which a hydrogel is gelated (i.e., physically or chemically cross-linked) not only impacts the biocompatibility, mechanical properties, and chemical structure, but also the route of delivery of the hydrogel and thus its effect on cardiac repair. With regard to cardiac regeneration, various hydrogels have been developed with the ability to function as a delivery system for therapeutic strategies (e.g., drug and stem cells treatments), as well as a scaffold to guide cardiac tissue regeneration following myocardial infarction. However, these developments remain within the experimental and pre-clinical realm and have yet to transition towards the clinical setting.

Injection of l-arginine or l-lysine before freezing delays the emulsifying and gelling properties deterioration of myofibrillar proteins of frozen porcine Longissimus lumborum muscle

This study aimed to investigate the effects of injecting l-arginine and l-lysine solution before freezing and after thawing on the emulsifying and gelling properties of myofibrillar proteins (MPs) of frozen porcine longissimus dorsi. The results showed that the pre-freezing injections were more effective in alleviating the decrease in emulsifying properties of MPs compared with the post-thawing injections, as evidenced by higher emulsion creaming index, oil droplet size, interfacial absorptive protein amount, and viscoelasticity. Additionally, the pre-freezing injections could effectively mitigate the damage to the gelling properties of MPs, as evidenced by the formation of a homogeneous and compact gel network with stronger water retention, strength and chemical forces, as well as a higher proportion of non-flowing water, whereas the post-thawing injections could not. These results demonstrated that the injection of l-arginine and l-lysine solution before freezing could delay freezing-induced damage to the emulsifying and gelling properties of MPs, keeping the processing characteristics of frozen porcine.

The level of sulfate substitution of polysaccharide regulates thermal-induced egg white protein gel properties: The characterization of gel structure and intermolecular forces

Sulfated polysaccharides exhibit great potential for regulating protein-protein interactions. In the present study, three sulfated microcrystalline cellulose (MCS) with different degrees of sulfate substitution (DSS: 0.33, 0.51, 0.61) were synthesized and the effects of DSS on the regulation of egg white protein (EWP) aggregation and gelation properties were investigated. The results found that the improvement of protein mechanical properties by MCS is closely related to the level of sulfate substitution. The higher the DSS, the more ordered protein aggregates and compact gel network formed during heating as compared to that of pure EWP. Lower DSS (0.33) shows little effect on the mechanical properties of EWP. Furthermore, all the MCSs could significantly destroy the tertiary structure of protein molecules during heating, while for the secondary structure, MCS with higher DSS (0.51 and 0.61) could effectively control the decreasing tendency of α-helix and increasing tendency of β-sheet. Hydrophobic interactions were recognized as the major intermolecular force in the compact mixed gels (EWP/MCS2 and EWP/MCS3 gels, DSS was 0.51 and 0.61, respectively). These findings provide a vital understanding of the gelling mechanism of the protein-polysaccharide system and the application of sulfated polysaccharides in protein-based food products.

TiO2, CeO2, and TiO2-CeO2 nanoparticles incorporated 2.5D chitosan hydrogels: Gelation behavior and cytocompatibility

In this study, gelation behavior and cytocompatibility of 2.5D chitosan hydrogels were investigated in the presence of TiO2, CeO2 and TiO2-CeO2 composite nanoparticles. Chemical co-precipitation method was used for nanoparticle synthesis and they were heat treated at 600 °C and 700 °C. Gelation of the chitosan solutions was carried out at 37 °C in the presence of glycerol phosphate and genipin as crosslinkers. The gelation time of chitosan was decreased by all of the nanoparticles whereas its elastic modulus was increased by nanoparticles addition. Chitosan solutions containing CeO2 or TiO2-CeO2 nanoparticles showed faster gel formation compared to chitosan solutions containing only TiO2 nanoparticles. CeO2@700 °C nanoparticles decreased the gelation time by 46% and increased elastic modulus by 14%. Average pore diameter of the hydrogel decreased from 127 ± 62 μm to 77 ± 33 μm, water uptake decreased 21% and thermal stability increased in the presence of CeO2@700 °C nanoparticles compared to chitosan hydrogel. Cell viability results indicated that chitosan hydrogels with or without nanoparticles created 2.5D environment supporting cellular proliferation approximately 1.5 times more than TCPS due to their high porous surfaces. Immunofluorescence images were also supported cell viability results. Therefore, CeO2 or TiO2-CeO2 composite nanoparticles incorporated 2.5D chitosan hydrogels may be alternative tissue engineering materials with their fast gelation, ease of use, low cost, light transparency, and cytocompatibility.

High-intensity ultrasound treatment on casein: Pea mixed systems: Effect on gelling properties

This study aimed to investigate the suitability of the application of high-intensity ultrasounds (HIUS) to improve the acid induced gelation of mixed protein systems formed by casein micelles (CMs) and pea. The protein suspensions were prepared in different protein ratios CMs: pea (100:0, 80:20, 50:50, 20:80, 0:100) at 8% (w/w) total protein concentration. In the suspensions, the ultrasound treatment produced an increase in solubility, surface hydrophobicity, and a decrease in the samples' viscosity, with more remarkable differences in protein blends in which pea protein was the major component. However, the replacement of 20% of CMs for pea proteins highly affected the gel elasticity. Hence, the creation of smaller and more hydrophobic building blocks before acidification due to the HIUS treatment increased the elasticity of the gels up to 10 times. Therefore, high-intensity ultrasounds are a suitable green technique to increase the gelling properties of CMs: pea systems.

The pH-responsiveness carrier of sanxan gel beads crosslinked with CaCl2 to control drug release

Natural polysaccharide-based gel carriers have been widely studied for their potential to provide slow and controlled release. Sanxan is an edible polysaccharide produced by Sphingomonas sanxanigenens. In this study, gel beads were prepared using the extrusion dripping method with sanxan as the carrier material and HCl and CaCl2 as the fixing solution. The molecular structure, texture profile, and microstructure of the bead were analyzed. And the swelling characterization and in vitro release of beads were evaluated. The results of Fourier-transform infrared analysis indicate that Ca2+ was used to create an ionically crosslinked structure of sanxan. Texture analyzer and scanning electron microscope studies showed that the acid‑calcium gel exhibited physical resistance and resilience, as well as a distinct gel pore structure. The swelling, dissolution, and drug release of the beads decreased as the amount of CaCl2 increased. Compared to the control (without CaCl2), the release of sanxan beads when 0.5 CaCl2 was added (sanxan carboxyl/Ca2+, by the number of moles M/M) in the stomach and small intestine release decreased by 40.9 % and 49.5 %, respectively. This study indicates that the fabrication of sanxan-Ca2+ crosslinked gel had sustained release characteristics, indicating that sanxan carriers have great potential for gradual and regulated medication delivery.

Enhanced stability, formulations, and rheological properties of nanoemulsions produced with microfludization for eco-friendly process

HYPOTHESIS

Eco-friendly processes that are emerging around the world require mass production of low-energy, low-cost nanoemulsions. The process involving the high-concentrated nanoemulsions and diluting them with a large amount of solvent can certainly save the cost; however, not much detailed research has been conducted on the stability mechanism and rheological characteristics of high-concentrated nanoemulsions.

EXPERIMENTS

In this study, we produced nanoemulsions via the microfluidization (MF) process, comparing their dispersion stability and rheological characteristics with macroemulsions across various oil and surfactant concentrations. Droplet mobility and dispersion stability depended on these concentrations, with Asakura-Osawa-type attractive depletion considering interparticle interaction's role in stability changes. We investigated nanoemulsions' long-term stability based on turbidity and droplet size changes over four weeks, proposing a stability diagram showing four different states depending on emulsification conditions.

FINDINGS

We explored the microstructure of emulsions under varying mixing conditions, observing their effects on droplet mobility and rheological properties. We monitored changes in rheology, turbidity, and droplet size over 4 weeks, establishing stability diagrams for macro- and nanoemulsions. The stability diagrams revealed that the stability of emulsions are sensitively dependent on the droplet size, concentrations, surfactant cocentrations and the strcture of coexistent phases in case of macroscopic segregation are significantly different depending on the droplet sizes. We identified their respective stability mechanisms and discovered the relationship between stability and rheological properties for highly concentrated nanoemulsion.

Classification, gelation mechanism and applications of polysaccharide-based hydrocolloids in pasta products: A review

Polysaccharide-based hydrocolloids (PBHs) are a group of water-soluble polysaccharides with high molecular weight hydrophilic long-chain molecules, which are widely employed in food industry as thickeners, emulsifiers, gelling agents, and stabilizers. Pasta products are considered to be an important source of nutrition for humans, and PBHs show great potential in improving their quality and nutritional value. The hydration of PBHs to form viscous solutions or sols under specific processing conditions is a prerequisite for improving the stability of food systems. In this review, PBHs are classified in a novel way according to food processing conditions, and their gelation mechanisms are summarized. The application of PBHs in pasta products prepared under different processing methods (baking, steaming/cooking, frying, freezing) are reviewed, and the potential mechanism of PBHs in regulating pasta products quality is revealed from the interaction between PBHs and the main components of pasta products (protein, starch, and water). Finally, the safety of PBHs is critically explored, along with future perspectives. This review provides a scientific foundation for the development and specific application of PBHs in pasta products, and provides theoretical support for improving pasta product quality.

Manipulating supramolecular gels with surfactants: Interfacial and non-interfacial mechanisms

Gel is a class of self-supporting soft materials with applications in many fields. Fast, controllable gelation, micro/nano structure and suitable rheological properties are essential considerations for the design of gels for specific applications. Many methods can be used to control these parameters, among which the additive approach is convenient as it is a simple physical mixing process with significant advantages, such as avoidance of pH change and external energy fields (ultrasound, UV light and others). Although surfactants are widely used to control the formation of many materials, particularly nanomaterials, their effects on gelation are less known. This review summarizes the studies that utilized different surfactants to control the formation, structure, and properties of molecular and silk fibroin gels. The mechanisms of surfactants, which are interfacial and non-interfacial effects, are classified and discussed. Knowledge and technical gaps are identified, and perspectives for further research are outlined. This review is expected to inspire increasing research interest in using surfactants for designing/fabricating gels with desirable formation kinetics, structure, properties and functionalities.

Gelation of Hole Transport Layer to Improve the Stability of Perovskite Solar Cells

To achieve high power conversion efficiency (PCE) and long-term stability of perovskite solar cells (PSCs), a hole transport layer (HTL) with persistently high conductivity, good moisture/oxygen barrier ability, and adequate passivation capability is important. To achieve enough conductivity and effective hole extraction, spiro-OMeTAD, one of the most frequently used HTL in optoelectronic devices, often needs chemical doping with a lithium compound (LiTFSI). However, the lithium salt dopant induces crystallization and has a negative impact on the performance and lifetime of the device due to its hygroscopic nature. Here, we provide an easy method for creating a gel by mixing a natural small molecule additive (thioctic acid, TA) with spiro-OMeTAD. We discover that gelation effectively improves the compactness of resultant HTL and prevents moisture and oxygen infiltration. Moreover, the gelation of HTL improves not only the conductivity of spiro-OMeTAD, but also the operational robustness of the devices in the atmospheric environment. In addition, TA passivates the perovskite defects and facilitates the charge transfer from the perovskite layer to HTL. As a consequence, the optimized PSCs based on the gelated HTL exhibit an improved PCE (22.52%) with excellent device stability.

Regulation mechanism of curcumin-loaded oil on the emulsification and gelation properties of myofibrillar protein: Emphasizing the dose-response of curcumin

The regulation mechanism of curcumin (CUR) in the oil phase on the emulsification and gelation properties of myofibrillar protein (MP) was investigated. CUR enhanced the emulsifying activity index (EAI) of MP but decreased its turbiscan stability index (TSI) and surface hydrophobicity, which exacerbated oil droplet aggregation. Medium amounts (200 mg/L) of CUR changed the 3D network architectures of emulsion gels from lamellar to reticular, improving the gels' water-holding capacity (WHC), storage modulus, springiness, and cohesiveness. Besides, the LF-NMR revealed that CUR had limited effects on the mobility of immobilized and free water. The α-helix of MP in gels with medium amounts of CUR decreased from 51% to 45%, but the β-sheet increased from 23% to 27% compared to those without CUR. Overall, CUR has the potential to become a novel structural modifier in emulsified meat products due to its dose-response.

Mechanism for improving the gel properties of transglutaminase-mediated porcine myofibrillar protein by ultrasonic pretreatment combined with carrageenan

To improve the limitation of transglutaminase on the quality of myofibrillar protein (MP) gel, this study investigated the synergistic effect of ultrasonic pretreatment in combination with carrageenan on the gel properties of transglutaminase-mediated MP gels. The synergistic effect generated gel with lower surface hydrophobicity and fluorescence intensity. Combined with the secondary structure results, it can be hypothesized that the synergistic effect caused the rearrangement of the proteins and the formation of aggregates wrapping hydrophobic groups, which changed the structure and phase behavior of the proteins. The synergistic effect also improved the formation of dense and interpenetrating gel networks, which reduced cooking loss and produced composite MP gels with optimal gel strength. Moreover, FTIR spectroscopy revealed the presence of electrostatic interactions in the hybrid gel system. This study provides a theoretical basis and experimental foundation for the effective use of high-tech composite functional components to improve the quality of gel products.

Sol/gel transition of thermoresponsive Hyaluronan: From liquids to elastic and sticky materials

Thermoassociating copolymers were prepared by grafting temperature responsive poly(N-isopropylacrylamide-stat-N-tert-butylacrylamide) telomers onto hyaluronan. By varying the composition of LCST side chains, from 50 to 100 wt% of NIPAM units, it is shown that the sol/gel transition of entangled solutions can be accurately controlled in the range of 10 to 35 °C with an abrupt transition and reversible properties. Complementary experiments, performed by DSC and NMR, demonstrate the close relationship between thermoassociation of LCST grafts, forming microdomains of low mobility, and macroscopic properties. Moreover, by performing tack experiments during heating we demonstrate that hyaluronan formulations abruptly switch from a weak adhesive viscous behavior to an elastic adhesive profile in the gel regime. As LCST side-chains form concentrated micro-domains of low mobility, physical gels can resist to dissociation above their sol/gel transition for relatively long periods when immersed in excess physiological medium. The thermoassociative behavior of these copolymers, whose properties can be finely tuned in order to form sticky gels at body temperature, clearly demonstrates their potential in biomedical applications such as injectable gels for drug delivery or tissue engineering.

Enhancement of polymer thermoresponsiveness and drug delivery across biological barriers by addition of small molecules

Thermoresponsive polymers that undergo sol-gel transitions in the physiological temperature range have been widely used in biomedical applications. However, some commercially and clinically available thermoresponsive materials, particularly poloxamer 407 (P407), have the significant drawback of insufficient gel strength, which limit their performance. Furthermore, co-delivery with some small molecules, including chemical permeation enhancers (CPEs) can further impair the physical properties of P407. Here, we have developed a thermoresponsive platform by combination of CPEs with the poloxamer P188 to enable gelation at physiological temperatures and enhance gel strength. P188 gels at 60 °C, which is far above the physiological range. In combination with limonene (LIM) and sodium dodecyl sulfate (SDS), P188 gels at ∼25 °C, a temperature that in useful for biomedical applications. Gelation behavior was studied by small angle neutron scattering (SANS) experiments, which identified micelle-to-cubic mesophase transitions with increasing temperature. Analysis of the SANS intensities revealed that P188 micelles became larger as LIM or SDS molecules were incorporated, making it easier to form a micellar gel structure. P188-3CPE (i.e., 2% LIM, 1% SDS and 0.5% bupivacaine (BUP)) had low viscosity at room temperature, facilitating administration, but rapidly gelled at body temperature. P188-3CPE enabled the flux of the antibiotic ciprofloxacin across the TM and completely eradicated otitis media from nontypable Haemophilus influenzae (NTHi) in chinchillas after a single administration.

Thermal gelation and digestion properties of hen egg white: Study on the effect of neutral and alkaline salts addition

In this study, the thermal gelation and digestion properties of hen egg white (hen EW) proteins with different salts were investigated. Results show that the addition of neutral salt - sodium chloride (NaCl) decreased the gel hardness/resilience, increased gel lightness, aggregated particle size and digestibility of hen EW proteins significantly. In contrast, alkaline salts - phosphate and carbonate addition increased the gel resilience and strain tolerance as well as reduced the aggregated particle size and gel lightness of hen EW proteins due to the increase of solution pH and negative charge. Correlation analysis shows that the digestibility of hen EW gels was affected by gel viscoelasticity, molecule forces and texture. In conclusion, thermal gelation properties of hen EW proteins could be modulated by salts with different pH/ionic strength, and thus affected the protein digestion and peptide released.

Improving the gel properties of salted egg white/cooked soybean protein isolate composite gels by ultrasound treatment: Study on the gelling properties and structure

In this study, the effects of ultrasound treatment on the texture, physicochemical properties and protein structure of composite gels prepared by salted egg white (SEW) and cooked soybean protein isolate (CSPI) at different ratios were investigated. With the increased SEW addition, the ζ-potential absolute values, soluble protein content, surface hydrophobicity and swelling ratio of composite gels showed overall declining trends (P < 0.05), while the free sulfhydryl (SH) contents and hardness of exhibited overall increasing trends (P < 0.05). Microstructural results revealed that composite gels exhibited denser structure with the increased SEW addition. After ultrasound treatment, the particle size of composite protein solutions significantly decreased (P < 0.05), and the free SH contents of ultrasound-treated composite gels were lower than that of untreated composite gels. Moreover, ultrasound treatment enhanced the hardness of composite gels, and promoted the conversion of free water into non-flowable water. However, when ultrasonic power exceeded 150 W, the hardness of composite gels could not be further enhanced. FTIR results indicated that ultrasound treatment facilitated the composite protein aggregates to form a more stable gel structure. The improvement of ultrasound treatment on the properties of composite gels was mainly by promoting the dissociation of protein aggregates, and the dissociated protein particles further interacted to form denser aggregates through disulfide bond, thus facilitating the crosslinking and reaggregation of protein aggregates to form denser gel structure. Overall, ultrasound treatment is an effective approach to improve the properties of SEW-CSPI composite gels, which can improve the potential utilization of SEW and SPI in food processing.

Carboxymethylation modification, characterization of dandelion root polysaccharide and its effects on gel properties and microstructure of whey protein isolate

In the present study, a native polysaccharide (DP) with sugar content of 87.54 ± 2.01 % was isolated from dandelion roots. DP was chemically modified to obtain a carboxymethylated polysaccharide (CMDP) with DS of 0.42 ± 0.07. DP and CMDP were composed of the same six monosaccharides including mannose, rhamnose, galacturonic acid, glucose, galactose, and arabinose. The molecular weights of DP and CMDP were 108,200 and 69,800 Da, respectively. CMDP exhibited more stable thermal performance and better gelling properties than DP. The effects of DP and CMDP on the strength, water holding capacity (WHC), microstructure, and rheological properties of whey protein isolate (WPI) gels were investigated. Results showed that CMDP-WPI gels had higher strength and WHC than DP-WPI gels. With the addition of 1.5 % CMDP, WPI gel had a good three-dimensional network structure. The apparent viscosities, loss modulus (G"), and storage modulus (G') of WPI gels were increased with the polysaccharide addition, the influence of CMDP was remarkable compared to DP at the same concentration. These findings suggest that CMDP may be used as a functional ingredient in protein-containing food products.

Gelation behaviors and mechanism of a new pectic polysaccharide from apple pomace as a potential gelatin substitute

In this study, we reported a pectic polysaccharide industrially obtained from apple pomace by metal ion precipitation technique showing an unexpected gelation behavior. Structurally, this apple pectin (AP) is a macromolecular polymer with a weight-average molecular weight (Mw) of 361.7 kDa, and DM (degree of methoxylation) of 12.5 %, comprising 60.38 % glucose, 19.41 % mannose, 17.60 % galactose and 1.00 % rhamnose and 1.61 % glucuronic acid. The low acidic sugar percentage relative to the total monosaccharide amount indicated a high branching structure of AP. On addition of Ca²⁺ ions, AP exhibited a remarkable gelling ability upon cooling its heat solution to low temperature (e.g., 4 °C). However, at room temperature (e.g., 25 °C) or in the absence of Ca²⁺, no gel was formed. At a fixed pectin concentration (0.5 %, w/v), AP showed increasing gel hardness and gelation temperature (T_gel) with CaCl₂ concentration increasing to 0.05 % (w/v); however, further addition of CaCl₂ weakened AP gels and even abolished the gelation. On reheating, all gels melted below 35 °C, which suggests the potential use of AP as a gelatin substitute. The gelation mechanism was explained as an intricate balance of the synchronous formation of hydrogen bond and Ca²⁺ crosslinks between AP molecules during cooling.

Concentration-dependent effect of eugenol on porcine myofibrillar protein gel formation

The effects of different concentrations of eugenol (EG = 0, 5, 10, 20, 50, and 100 mg/g protein) on the structural properties and gelling behavior of myofibrillar proteins (MPs) were investigated. The interaction of EG and MPs decreased free thiol and amine content, and reduced tryptophan fluorescence intensity and thermal stability, but enhanced surface hydrophobicity and aggregation of MPs. Compared with the control (EG free), the MPs' gels treated with 5 and 10 mg/g of EG had a higher storage modulus, compressive strength, and less cooking loss. A high microscopic density was observed in these EG-treated gels. However, EG at 100 mg/g was detrimental to the gelling properties of the MPs. The results indicate that an EG concentration of 20 mg/g is a turning point, i.e., below 20 mg/g, EG promoted MPs gelation, but above 20 mg/g, it impeded gelation by interfering with protein network formation. The EG modification of MPs could provide a novel ingredient strategy to improve the texture of comminuted meat products.

Preparation and properties of Sanxan gel based fertilizer for water retention and slow-release

The advent of gel fertilizers has benefited agriculture and the environment. This study utilized sanxan, a novel polysaccharide, as a carrier and loaded it with urea to create sanxan gel fertilizer (SGF), thus creating a new, effective gel fertilizer. Water retention and sustained release ability of SGF were evaluated, and crop experiments were carried out. The results showed that, SGF that content 2.0 % solution of sanxan and loaded 20 g g^-1 of urea were prepared by heating-cooling method. The water-retention ratio of SGF was attained at 56.4 g g^-1 for 10 h. The urea releases of SGF in water have a more significant persistence than pure urea. In addition, wheat growth was promoted by SGF, compared with pure urea, the biomass of wheat shoot and root increased 27.4 % and 62.2 % during 20 days, respectively. Consequently, SGF has the ability to retain water and slowly release nutrition, which was an ideal carrier for managing water and urea. The SGF developed in this study provides data support and theoretical basis for the application of sanxan gel in agriculture and the environment.

Combining antioxidants and processing techniques to improve oxidative stability of a Schizochytrium algal oil ingredient with application in yogurt

Oxidative instability limits incorporation of ω-3 fatty acids (FAs) into some products. This research combined processing techniques with antioxidant addition to overcome these barriers. Oleogels, microencapsulates, and microencapsulated gel ingredients were prepared using Schizochytrium spp. algal oil (AO) in combination with α, β, γ, and δ tocopherols or 1-o-galloylglycerol (GG) as antioxidants. Ingredients were tested for physicochemical stability and optimal ingredients were selected to prepare yogurts as a model food with ideal matrix. Yogurts were analyzed for physicochemical properties. After 24-days storage at 4 °C, yogurt containing microencapsulated oleogel with GG as antioxidant exhibited average peroxide and p-Anisidine values of 7.17 mmol O2/kg of oil and 118.85 abs/g, respectively. These values were similar to store-bought yogurt using saturated fat source, with values of 6.83 mmol O2/kg of oil and 117.95 absorbance/g, respectively. These results could lead to incorporation of ω-3 FAs into foods, cosmetics, and pharmaceuticals in the future.

Amyloid fibril-nanocellulose interactions and self-assembly

Amyloid fibrils from inexpensive food proteins and nanocellulose are renewable and biodegradable materials with broad ranging applications, such as water purification, bioplastics and biomaterials. To improve the mechanical properties of hybrid amyloid-nanocellulose materials, their colloidal interactions need to be understood and tuned. A combination of turbidity and zeta potential measurements, rheology and atomic force microscopy point to the importance of electrostatic interactions. These interactions lead to entropy-driven polyelectrolyte complexation for positively charged hen egg white lysozyme (HEWL) amyloids with negatively charged nanocellulose. The complexation increased the elasticity of the amyloid network by cross-linking individual fibrils. Scaling laws suggest different contributions to elasticity depending on nanocellulose morphology: cellulose nanocrystals induce amyloid bundling and network formation, while cellulose nanofibrils contribute to a second network. The contribution of the amyloids to the elasticity of the entire network structure is independent of nanocellulose morphology and agrees with theoretical scaling laws. Finally, strong and almost transparent hybrid amyloid-nanocellulose gels were prepared in a slow self-assembly started from repulsive co-dispersions above the isoelectric point of the amyloids, followed by dialysis to decrease the pH and induce amyloid-nanocellulose attraction and cross-linking. In summary, the gained knowledge on colloidal interactions provides an important basis for the design of functional biohybrid materials based on these two biopolymers.