Biomimetic design and fabrication of porous chitosan–gelatin liver scaffolds with hierarchical channel network

Preparation of a scaffold for a vascular network channel with spatially varying diameter based on sucrose

In the past few decades, although tissue engineering has made significant progress and achieved many accomplishments, there are still some key problems that remain unsolved. One of the urgent research challenges in this field is how to prepare large-scale tissue engineering scaffolds with spatially complex structures. In this work, a sacrificial template process using sucrose as the sacrificial material and a gelatin/microbial transglutaminase mixed solution as the bio-scaffold material is proposed to fabricate a bio-scaffold with multi-level branching and spatially complex vascular network channels that mimic the structure and function of the human vascular network. To validate the feasibility of the fabrication process and the rationality of the process parameters, the morphological characteristics, connectivity of vascular network channels, shaping accuracy, and mechanical properties of the bio-scaffold were tested and analyzed. The results showed that the bio-scaffold fabricated using this process had a complete morphology and excellent connectivity. The diameter of the sucrose sacrificial template showed a linear relationship with the feeding speed, and the average diameter error rate between the sucrose sacrificial template and the vascular network channels inside the bio-scaffold was less than 8%. The mechanical properties of the bio-scaffold met the requirements for large-scale tissue defect repair. To evaluate the effect of the bio-scaffold on cell activity, human umbilical vein endothelial cells (HUVECs) were seeded into the vascular network channels of the bio-scaffold, and their attachment, growth, and proliferation on the surface of the vascular network channels were observed. To further assess the biocompatibility of the bio-scaffold, the bio-scaffold was implanted subcutaneously in the dorsal tissue of rats, and the tissue regeneration status was compared and analyzed through immunohistochemical analysis. The results showed that the vascular network channels within the bio-scaffold allowed uniform cell attachment, growth, with fewer dead cells and high cell viability. Moreover, clear cell attachment and growth were observed within the vascular network channels of the bio-scaffold after implantation in rats. These results indicate that the fabricated bio-scaffold meets the basic performance requirements for the repair and regeneration of large-scale tissue defects, providing a new approach for oxygen and nutrient transport in large-scale tissues and opening up new avenues for clinical applications.

Dual-core coaxial bioprinting of double-channel constructs with a potential for perfusion and interaction of cells

Coaxial bioprinting of hydrogel tubes has tremendous potential in the fabrication of highly complex large-scale vascularized structures, however, constructs with bioinks of simultaneous weak printability and perfusable networks have not been reported. Here, we report a coaxial printing method in which double-channel filaments are three-dimensional (3D) extrusion-bioprinted using a customized dual-core coaxial nozzle. The filament in one channel can perform core/shell role and the other channel can play a role in perfusion. These parallel channels within filaments are separated by an interval wall of alginate, whose thickness (∼50μm) is beneficial to supplement nutrients via perfusion. Different cell-laden hydrogels of weak mechanics were used to test the adaptability and perfusability of our method, and the results showed that dynamic perfusion maintained higher viability and functions than static culture. By combining with a bioprinter, 8-layer perfusable double-channel constructs were fabricated, and the cell viabilities gradually decreased with the reduction in nutrients and oxygen in the downstream medium. Furthermore, the double-channel filaments were tested as a platform to mimic dynamic functions between cells through sequential perfusion by using Mouse insulinoma 6 (Min6) and Hepatocellular carcinoma (HepG2) as the model cells. These results demonstrated the insulin secreted by Min6 upstream simulated and increased the uptake of glucose by the downstream HepG2 cells. In conclusion, our study provided evidence for the probability of all-in-one fabrication of 3D double-channel perfusable constructs with high simplicity, expansibility, and versability. Our strategy has significant potential for building large-scale tissue constructs for applications in tissue engineering, possibly even in drug screening and regenerative medicine.

Natural polymer-based hydrogels as prospective tissue equivalent materials for radiation therapy and dosimetry

Natural polymer-based hydrogels have been extensively employed in tissue engineering and biomedical applications, owing to their biodegradability and biocompatibility. In the present work, we have investigated the efficacy of hydrogels such as agarose, hyaluronan, gelatin, carrageenan, chitosan, sodium alginate and collagen as tissue equivalent materials with respect to photon and charged particle (electron, proton and alpha particle) interactions, for use in radiation therapy and dosimetry. Tissue equivalence has been investigated by computing photon mass energy absorption coefficient (μ_en/ρ), kinetic energy released per unit mass (KERMA), equivalent atomic number (Z_eq) and energy absorption build-up factors (EABF) relative to human tissues (soft tissue, cortical bone, skeletal muscle, breast tissue, lung tissue, adipose tissue, skin tissue, brain) in the energy range of 0.015-15 MeV. Ratio of effective atomic numbers (Z_eff) have been examined for tissue-equivalence in the energy range of 10 keV-1 GeV for charged particle interactions. Analysis using standard theoretical formulations revealed that all the selected natural polymers can serve as good tissue equivalent materials with respect to all human tissues except cortical bone. Notably, sodium alginate, collagen and hyaluronan are found to have radiation interaction characteristics close to that of human tissues. These results would be useful in deciding on the suitability of a natural polymer hydrogel as tissue substitute in the desired energy range.

Emerging liver organoid platforms and technologies

Building human organs in a dish has been a long term goal of researchers in pursue of physiologically relevant models of human disease and for replacement of worn out and diseased organs. The liver has been an organ of interest for its central role in regulating body homeostasis as well as drug metabolism. An accurate liver replica should contain the multiple cell types found in the organ and these cells should be spatially organized to resemble tissue structures. More importantly, the in vitro model should recapitulate cellular and tissue level functions. Progress in cell culture techniques and bioengineering approaches have greatly accelerated the development of advance 3-dimensional (3D) cellular models commonly referred to as liver organoids. These 3D models described range from single to multiple cell type containing cultures with diverse applications from establishing patient-specific liver cells to modeling of chronic liver diseases and regenerative therapy. Each organoid platform is advantageous for specific applications and presents its own limitations. This review aims to provide a comprehensive summary of major liver organoid platforms and technologies developed for diverse applications.

Biological testing of chitosan-collagen-based porous scaffolds loaded with PLGA/Triamcinolone microspheres for ameliorating endoscopic dissection-related stenosis in oesophagus

Objectives

Endoscopic submucosal dissection (ESD), a preferential approach for early oesophageal neoplasms, inevitably results in oesophageal strictures in patients. Clinical use of glucocorticoids through submucosal injection is beneficial for inhibiting oesophageal stricture following injury; however, it also has limitations, such as dose loss and perforation. Hence, alternatives to glucocorticoid therapy should be developed.

Methods

A novel porous composite scaffold, ChCo‐TAMS, composed of chitosan, collagen‐I and triamcinolone acetonide (TA) loaded into poly (lactic‐co‐glycolic) acid (PLGA) microspheres (TAMS), was successfully constructed and subjected to biological testing to ameliorate oesophageal ESD‐related stenosis.

Results

The synthesized biomaterials displayed unique properties in inhibiting the activation of macrophages, chemokine‐mediated cell recruitment and fibrogenesis of fibroblasts. Further application of the scaffolds in the rat dermal defect and porcine oesophageal ESD model showed that these novel scaffolds played a robust role in inhibiting wound contracture and oesophageal ESD strictures.

Conclusions

The developed composite scaffolds provide a promising clinical medical device for the prevention of post‐operative oesophageal stricture.

Advances in Engineering Human Tissue Models

Research in cell biology greatly relies on cell-based in vitro assays and models that facilitate the investigation and understanding of specific biological events and processes under different conditions. The quality of such experimental models and particularly the level at which they represent cell behavior in the native tissue, is of critical importance for our understanding of cell interactions within tissues and organs. Conventionally, in vitro models are based on experimental manipulation of mammalian cells, grown as monolayers on flat, two-dimensional (2D) substrates. Despite the amazing progress and discoveries achieved with flat biology models, our ability to translate biological insights has been limited, since the 2D environment does not reflect the physiological behavior of cells in real tissues. Advances in 3D cell biology and engineering have led to the development of a new generation of cell culture formats that can better recapitulate the in vivo microenvironment, allowing us to examine cells and their interactions in a more biomimetic context. Modern biomedical research has at its disposal novel technological approaches that promote development of more sophisticated and robust tissue engineering in vitro models, including scaffold- or hydrogel-based formats, organotypic cultures, and organs-on-chips. Even though such systems are necessarily simplified to capture a particular range of physiology, their ability to model specific processes of human biology is greatly valued for their potential to close the gap between conventional animal studies and human (patho-) physiology. Here, we review recent advances in 3D biomimetic cultures, focusing on the technological bricks available to develop more physiologically relevant in vitro models of human tissues. By highlighting applications and examples of several physiological and disease models, we identify the limitations and challenges which the field needs to address in order to more effectively incorporate synthetic biomimetic culture platforms into biomedical research.

Graphene Family Nanomaterial Reinforced Magnesium-Based Matrix Composites for Biomedical Application: A Comprehensive Review

Together with the enhancement of the load-bearing implant process for bone substitution and reproduction, an increasing requirement was observed concerning biodegradable magnesium and its alloys with lighter density and outstanding characteristics. Regardless of the current great potential of Mg utilization currently, the broader use of Mg alloys continues to be constrained by several natural causes, such as low resistance of corrosion, inadequate mechanical integrity during the healing process, and poor antibacterial performance. In this perspective, Mg-based composite encapsulated within graphene family nanomaterials (GFNs) such as graphene (Gr), graphene oxide (GO), graphene nanoplatelets (GNPs), and reduced graphene oxide (rGO) as reinforcement agents present great antibacterial activity, as well as cellular response and depicted numerous benefits for biomedical use. Magnesium matrix nanocomposites reinforced with GFNs possess enhanced mechanical properties and high corrosion resistance (low concentration graphene). It is worth noting that numerous elements including the production technique of the Mg-based composite containing GFNs and the size, distribution, and amounts of GFNs in the Mg-based matrix have a crucial role in their properties and applications. Then, the antibacterial mechanisms of GFN-based composite are briefly described. Subsequently, the antibacterial and strengthening mechanisms of GFN-embedded Mg-based composites are briefly described. This review article is designed to wrap up and explore the most pertinent research performed in the direction of Mg-based composites encapsulated within GFNs. Feasible upcoming investigation directions in the field of GFN-embedded Mg-based composites are discussed in detail.

Advanced Biomaterials and Processing Methods for Liver Regeneration: State-of-the-Art and Future Trends

Liver diseases contribute markedly to the global burden of mortality and disease. The limited organ disposal for orthotopic liver transplantation results in a continuing need for alternative strategies. Over the past years, important progress has been made in the field of tissue engineering (TE). Many of the early trials to improve the development of an engineered tissue construct are based on seeding cells onto biomaterial scaffolds. Nowadays, several TE approaches have been developed and are applied to one vital organ: the liver. Essential elements must be considered in liver TE-cells and culturing systems, bioactive agents or growth factors (GF), and biomaterials and processing methods. The potential of hepatocytes, mesenchymal stem cells, and others as cell sources is demonstrated. They need engineered biomaterial-based scaffolds with perfect biocompatibility and bioactivity to support cell proliferation and hepatic differentiation as well as allowing extracellular matrix deposition and vascularization. Moreover, they require a microenvironment provided using conventional or advanced processing technologies in order to supply oxygen, nutrients, and GF. Herein the biomaterials and the conventional and advanced processing technologies, including cell-sheets process, 3D bioprinting, and microfluidic systems, as well as the future trends in these major fields are discussed.

Development of a 3D porous chitosan/gelatin liver scaffold for a bioartificial liver device

Functional artificial livers (FALs), with embedded hepatocytes that perform the functions of a normal liver, have been developed during the past decades. It is important to note that the liver scaffold, which is a biologically functional core of bioartificial livers, plays a vital role in the bio-cartridge within a bioartificial liver. In this study, a three-dimensional (3D) liver scaffold for in vitro cultures was fabricated by freeze-drying a chitosan/gelatin (CG) solution. A CG scaffold has advantages such as (i) inexpensive and easy-to-make; (ii) easy to fabricate with varying compressive modulus by changing the concentration of glutaraldehyde; (iii) non-cytotoxicity; and (iv) porous structure is similar to extracellular matrix (ECM), thus facilitating hepatocyte adhesion and proliferation. The results revealed that the compressive modulus and maintainability of a CG scaffold was correlated to the increase in glutaraldehyde. Furthermore, hepatocyte viability and hepatic functions showed the best performances with a 0.61% glutaraldehyde-CG scaffold. This CG scaffold not only had higher hepatocyte biocompatibility and mechanical strength, but also maintained hepatic functions and viability in vitro cultures; especially, the mechanical properties of 0.61% glutaraldehyde-CG scaffold were very similar to those in normal liver. The CG scaffold as a liver scaffold may have high potential for further bioartificial liver design in the near future.

Bioprinting for Liver Transplantation

Bioprinting techniques can be used for the in vitro fabrication of functional complex bio-structures. Thus, extensive research is being carried on the use of various techniques for the development of 3D cellular structures. This article focuses on direct writing techniques commonly used for the fabrication of cell structures. Three different types of bioprinting techniques are depicted: Laser-based bioprinting, ink-jet bioprinting and extrusion bioprinting. Further on, a special reference is made to the use of the bioprinting techniques for the fabrication of 2D and 3D liver model structures and liver on chip platforms. The field of liver tissue engineering has been rapidly developed, and a wide range of materials can be used for building novel functional liver structures. The focus on liver is due to its importance as one of the most critical organs on which to test new pharmaceuticals, as it is involved in many metabolic and detoxification processes, and the toxicity of the liver is often the cause of drug rejection.

Hydrogels for Liver Tissue Engineering

Bioengineered livers are promising in vitro models for drug testing, toxicological studies, and as disease models, and might in the future be an alternative for donor organs to treat end-stage liver diseases. Liver tissue engineering (LTE) aims to construct liver models that are physiologically relevant. To make bioengineered livers, the two most important ingredients are hepatic cells and supportive materials such as hydrogels. In the past decades, dozens of hydrogels have been developed to act as supportive materials, and some have been used for in vitro models and formed functional liver constructs. However, currently none of the used hydrogels are suitable for in vivo transplantation. Here, the histology of the human liver and its relationship with LTE is introduced. After that, significant characteristics of hydrogels are described focusing on LTE. Then, both natural and synthetic materials utilized in hydrogels for LTE are reviewed individually. Finally, a conclusion is drawn on a comparison of the different hydrogels and their characteristics and ideal hydrogels are proposed to promote LTE.

Direct-write and sacrifice-based techniques for vasculatures

Fabricating biomimetic vasculatures is considered one of the greatest challenges in tissue regeneration due to their complex structures across various length scales. Many strategies have been investigated on how to fabricate tissue-engineering vasculatures (TEVs), including vascular-like and vascularized structures that can replace their native counterparts. The advancement of additive manufacturing (AM) technologies has enabled a wide range of fabrication techniques that can directly-write TEVs with complex and delicate structures. Meanwhile, sacrifice-based techniques, which rely on the removal of encapsulated sacrificial templates to form desired cavity-like structures, have also been widely studied. This review will specifically focus on the two most promising methods in these recently developed technologies, which are the direct-write method and the sacrifice-based method. The performance, advantages, and shortcomings of each technique are analyzed and compared. In the discussion, we list current challenges in this field and present our vision of next-generation TEVs technologies. Perspectives on future research in this field are given at the end.

Biomimetic design and fabrication of scaffolds integrating oriented micro-pores with branched channel networks for myocardial tissue engineering

The ability to fabricate three-dimensional (3D) thick vascularized myocardial tissue could enable scientific and technological advances in tissue engineering and drug screening, and may accelerate its application in myocardium repair. In this study, we developed a novel biomimetic scaffold integrating oriented micro-pores with branched channel networks to mimic the anisotropy and vasculature of native myocardium. The oriented micro-pores were fabricated using an 'Oriented Thermally Induced Phase Separation (OTIPS)' technique, and the channel network was produced by embedding and subsequently dissolving a 3D-printed carbohydrate template after crosslinking. Micro-holes were incorporated on the wall of channels, which greatly enhanced the permeability of channels. The effect of the sacrificial template on the formation of oriented micro- pores was assessed. The mechanical properties of the scaffold were tuned by varying the temperature gradient and chitosan/collagen ratio to match the specific stiffness of native heart tissue. The engineered cardiac tissue achieved synchronized beating with electrical stimulation. Calcium transient results suggested the formation of connection between cardiomyocytes within scaffold. All the results demonstrated that the reported scaffold has the potential to induce formation of a perfusable vascular network and to create thick vascularized cardiac tissue that may advance further clinical applications.

Tissue-mimicking gelatin scaffolds by alginate sacrificial templates for adipose tissue engineering

When adipose tissue (AT) is impaired by trauma or disease, AT engineering could provide a shelf-ready structural and functional restoration as alternative to current clinical treatments, which mainly aim at aesthetic replacement. Yet, the lack of an efficient vascular network within the scaffolds represents a major limitation to their translation application in patients. Here, we propose the use of microstructured crosslinked gelatin hydrogels with an embedded prevascular channel as scaffolding materials for AT engineering. The scaffolds are fabricated using - simultaneously - alginate-based microbeads and 3D printed filaments as sacrificial material encapsulated in gelatin at the point of material fabrication and removed post-crosslinking. This method yields the formation of microstructures that resemble the micro-architecture of physiological human fat tissue and of microvessels that can facilitate vascularization through anastomosis with patients' own blood vessels. The cytocompatible method used to prepare the gelatin scaffolds showed structural stability over time while allowing for cell infiltration and protease-based remodeling/degradation. Scaffolds' mechanical properties were also designed to mimic the one of natural breast adipose tissue, a key parameter for AT regeneration. Scaffold's embedded channel (∅ = 300-400 µm) allowed for cell infiltration and enabled blood flow in vitro when an anastomosis with a rat blood artery was performed using surgical glue. In vitro tests with human mesenchymal stem cells (hMSC) showed colonization of the porous structure of the gelatin hydrogels, differentiation into adipocytes and accumulation of lipid droplets, as shown by Oil Red O staining. STATEMENT OF SIGNIFICANCE: The potential clinical use of scaffolds for adipose tissue (AT) regeneration is currently limited by an unmet simultaneous achievement of adequate structural/morphological properties together with a promoted scaffold vascularization. Sacrificial materials, currently used either to obtain a tissue-mimicking structure or hollow channels to promote scaffold' vascularization, are powerful versatile tools for the fabrication of scaffolds with desired features. However, an integrated approach by means of sacrificial templates aiming at simultaneously achieving an adequate AT-mimicking structure and hollow channels for vascularization is missing. Here, we prove the suitability of crosslinked gelatin scaffolds obtained by using sacrificial alginate microbeads and 3D printed strands to achieve proper features and hollow channels useful for scaffolds vascularization.

Interpenetrating polymer network hydrogels composed of chitosan and photocrosslinkable gelatin with enhanced mechanical properties for tissue engineering

Gelatin and chitosan (CS) are widely used natural biomaterials for tissue engineering scaffolds, but the poor mechanical properties of pure gelatin or CS hydrogels become a big obstacle that limits their use as scaffolds, especially in load-bearing tissues. This study provided a novel mechanism of forming interpenetrating network (IPN) of gelatin methacryloyl (GelMA) and CS hydrogels by covalent bonds and hydrophobic interactions through photocrosslinking and basification, respectively. By characterization of the compressive and tensile moduli, ultimate tensile stress and strain, it was found that semi-IPN and IPN structure can greatly enhance the mechanical properties of GelMA-CS hydrogels compared to the single network CS or GelMA. Moreover, the increase of either GelMA or CS concentration can strengthen the hydrogel network. Then, the swelling, enzymatic degradation, and morphology of GelMA-CS hydrogels were also systematically investigated. The excellent biocompatibility of GelMA-CS hydrogels was demonstrated by large spreading area of bone mesenchymal stem cells on hydrogel surfaces when CS concentration was <2% (w/v). According to this study, the multiple requirements of properties can be fulfilled by carefully selecting the GelMA and CS compositions for IPN hydrogels.

Preparation and characterization of a chitosan/galactosylated hyaluronic acid/heparin scaffold for hepatic tissue engineering

Cell culture microenvironment and hepatocyte-specific three-dimensional tissue-engineering scaffold play important roles for bioartificial liver devices. In the present study, highly porous sponge scaffolds composed of chitosan (CS) and galactosylated hyaluronic acid (GHA, galactose moieties were covalently coupled with hyaluronic acid through ethylenediamine), were prepared by freezing-drying technique. Because the growth factors specifically bind to heparin with a high affinity and biological stability of the growth factors are modulated by heparin. Heparin was added into CS/GHA scaffold under mild conditions. The effects of heparin on the morphology, structure, porosity, mechanical properties of the CS/GHA/heparin scaffold were studied. CS/GHA scaffold containing heparin maintains the porous structure and good mechanical properties. Furthermore, addition of heparin with the growth factors into the scaffold resulted in a significantly improved the microenvironment of cell growth and prolonged liver functions of the hepatocytes such as albumin secretion, urea synthesis and ammonia elimination. These results indicate that this CS/GHA/heparin scaffold is a potential candidate for liver tissue engineering.

Current status of three-dimensional printing inks for soft tissue regeneration

Recently, three-dimensional (3D) printing technologies have become an attractive manufacturing process, which is called additive manufacturing or rapid prototyping. A 3D printing system can design and fabricate 3D shapes and geometries resulting in custom 3D scaffolds in tissue engineering. In tissue regeneration and replacement, 3D printing systems have been frequently used with various biomaterials such as natural and synthetic polymers. In tissue engineering, soft tissue regeneration is very difficult because soft tissue has the properties of high elasticity, flexibility and viscosity which act as an obstacle when creating a 3D structure by stacking layer after layer of biomaterials compared to hard tissue regeneration. To overcome these limitations, many studies are trying to fabricate constructs with a very similar native micro-environmental property for a complex biofunctional scaffold with suitable biological and mechanical parameters by optimizing the biomaterials, for example, control the concentration and diversification of materials. In this review, we describe the characteristics of printing biomaterials such as hydrogel, synthetic polymer and composite type as well as recent advances in soft tissue regeneration. It is expected that 3D printed constructs will be able to replace as well as regenerate defective tissues or injured functional tissues and organs.

Fabrication, biodegradation behavior and cytotoxicity of Mg-nanodiamond composites for implant application

Mg-based biodegradable implants offer several advantages over their non-degradable or degradable polymeric counterparts used today. However, the low corrosion resistance of Mg in physiologic environment remained as concerns. In this research, nanodiamond (ND) was uniformly dispersed in Mg matrix to induce a protective layer on Mg surface during corrosion. Compared with pure Mg, fabricated Mg-ND nanocomposites had lower corrosion rates, higher corrosion potential, and higher corrosion resistance. Specifically, the corrosion rate of Mg was reduced by 4.5 times by adding 5 wt% of ND particles. Corrosion inhibition effect of ND was thus validated. The chemical interaction and physical adsorption of the ions from simulated body fluid on ND might be the main reason for enhanced corrosion resistance. In vitro biocompatibility test results indicated that Mg-ND nanocomposites were biocompatible since cells growing in contact with corrosion products of Mg-ND maintained high cell viability and healthy morphology. Therefore, Mg-ND nanocomposites with homogenous ND dispersion, enhanced corrosion resistance, and good biocompatibility might be an excellent candidate material for biodegradable implant application.

In vitro biodegradation behavior, mechanical properties, and cytotoxicity of biodegradable Zn-Mg alloy

Zinc-Magnesium (Zn-Mg) alloy as a novel biodegradable metal holds great potential in biodegradable implant applications as it is more corrosion resistant than Magnesium (Mg). However, the mechanical properties, biodegradation uniformity, and cytotoxicity of Zn-Mg alloy remained as concerns. In this study, hot extrusion process was applied to Zn-1 wt % Mg (Zn-1Mg) to refine its microstructure. Effects of hot extrusion on biodegradation behavior and mechanical properties of Zn-1Mg were investigated in comparison with Mg rare earth element alloy WE43. Metallurgical analysis revealed significant grain size reduction, and immersion test found that corrosion rates of WE43 and Zn-1Mg were reduced by 35% and 57%, respectively after extrusion. Moreover, hot extrusion resulted in a much more uniform biodegradation in extruded Zn-1Mg alloy and WE43. In vitro cytotoxicity test results indicated that Zn-1Mg alloy was biocompatible. Therefore, hot extruded Zn-1Mg with homogenous microstructure, uniform as well as slow degradation, improved mechanical properties, and good biocompatibility was believed to be an excellent candidate material for load-bearing biodegradable implant application.