Effect of sterilization and crosslinking on gelatin films

Bioactive injectable mucoadhesive thermosensitive natural polymeric hydrogels for oral bone and periodontal regeneration

Periodontitis is an inflammation-related condition, caused by an infectious microbiome and host defense that causes damage to periodontium. The natural processes of the mouth, like saliva production and eating, significantly diminish therapeutic medication residency in the region of periodontal disease. Furthermore, the complexity and diversity of pathological mechanisms make successful periodontitis treatment challenging. As a result, developing enhanced local drug delivery technologies and logical therapy procedures provides the foundation for effective periodontitis treatment. Being biocompatible, biodegradable, and easily administered to the periodontal tissues, hydrogels have sparked substantial an intense curiosity in the discipline of periodontal therapy. The primary objective of hydrogel research has changed in recent years to intelligent thermosensitive hydrogels, that involve local adjustable sol-gel transformations and regulate medication release in reaction to temperature, we present a thorough introduction to the creation and efficient construction of new intelligent thermosensitive hydrogels for periodontal regeneration. We also address cutting-edge smart hydrogel treatment options based on periodontitis pathophysiology. Furthermore, the problems and prospective study objectives are reviewed, with a focus on establishing effective hydrogel delivery methods and prospective clinical applications.

The Role of WO3 Nanoparticles on the Properties of Gelatin Films

Gelatin films are very versatile materials whose properties can be tuned through functionalization with different systems. This work investigates the influence of WO3 nanoparticles on the swelling, barrier, mechanical, and photochromic properties of gelatin films. To this purpose, polyvinylpirrolidone (PVP)-stabilized WO3 nanoparticles were loaded on gelatin films at two different pH values, namely, 4 and 7. The values of swelling and solubility of functionalized films displayed a reduction of around 50% in comparison to those of pristine, unloaded films. In agreement, WO3 nanoparticles provoked a significant decrease in water vapor permeability, whereas the decrease in the values of elastic modulus (from about 2.0 to 0.7 MPa) and stress at break (from about 2.5 to 1.4 MPa) can be ascribed to the discontinuity created by the nanoparticles inside the films. The results of differential scanning calorimetry and X-ray diffraction analysis suggest that interaction of PVP with gelatin reduce gelatin renaturation. No significant differences were found between the samples prepared at pH 4 and 7, whereas crosslinking with glutaraldehyde greatly influenced the properties of gelatin films. Moreover, the incorporation of WO3 nanoparticles in gelatin films, especially in the absence of glutaraldehyde, conferred excellent photochromic properties, inducing the appearance of an intense blue color after a few seconds of light irradiation and providing good resistance to several irradiation cycles.

Characterization of gelatin-based wound dressing biomaterials containing increasing coconut oil concentrations

This study determined the influence and ideal ratios of various coconut oil (CO) amounts in gelatin (G) based-films as wound dressings since there are limited comparative studies to evaluate the sole effect of increasing CO on protein-based biomaterials. Homogenous films at G:CO ratio of 4:0,4:2,4:3,4:4 (w:w) corresponding to CO-0, CO-2, CO-3, CO-4, respectively, were obtained using solution casting. SEM showed CO caused rougher surfaces decreasing mechanical strength. However, no pores were observed in CO-4 due to bigger clusters of oil improving stretchability compared to CO-3; and durability since aging of CO-4 was >10% lower than CO-0 in aqueous media. FTIR showed triglycerides' band only in CO films with increasing amplitude. Moreover, amide-I of CO-2 was involved in more hydrogen bonding, therefore, CO-2 had the highest melt-like transition temperatures (Tmax) at ∼163 °C while others' were at ∼133 °C; and had more ideal mechanical properties among CO films. XTT showed that increased CO improved 3T3 cell viability as CO-0 significantly decreased viability at 10,50,75,100 μg/mL (p < 0.05), whereas CO-2 and CO-3 within 5-75 μg/mL and CO-4 within 5-100 μg/mL range increased viability ≥100% suggesting proliferation. All CO samples at 25 μg/mL stimulated 3T3 cell migration in Scratch Assay indicating wound healing. CO amounts mainly improved thermal and healing properties of gelatin-based biomaterial. CO-2 was more thermally stable and CO-4 had better influence on cell viability and wound healing than CO-0. Therefore, increased CO ratios, specifically 4:2 and 4:4, G:CO (w:w), in gelatin-based films can be ideal candidates for wound dressing materials.

Development of Ag NPs/allantoin loaded PCL/GEL electrospun nanofibers for topical wound treatment

In the present study, the allantoin and silver nanoparticle (Ag NPs) loaded poly caprolactone/gelatin (PCL/GEL) nanofibers produced using electrospinning technique and their cyto-compatibility and wound healing activity were evaluated in vitro and in vivo. The SEM imaging revealed diameters of 278.8 ± 10 and 240.6 ± 12 nm for PCL/GEL/Ag NPs and PCL/GEL/Ag NPs/allantoin scaffolds. The Ag NPs entrapment into scaffolds was evaluated by FTIR analysis and EDX mapping. Both scaffolds containing Ag NPs and Ag NPs/allantoin exhibited valuable wound healing activity in Wistar rat animal model. The profound granulation tissue formation, high collagen deposition in coordination with low level of edema and inflammatory cells in Ag NPs/allantoin loaded scaffolds resulted in complete and mature re-epithelialization in giving the healing score (12 out of 12) equal to positive control group to the wounds treated with these scaffolds. It was concluded that the Ag NPs/allantoin loaded scaffolds regarding to their good antibacterial activity and excellent wound healing activity could be introduced as new effective wound dressing materials.

Effects of Gamma Irradiation and Supercritical Carbon Dioxide Sterilization on Methacrylated Gelatin/Hyaluronan Hydrogels

Biopolymer hydrogels have become an important group of biomaterials in experimental and clinical use. However, unlike metallic or mineral materials, they are quite sensitive to sterilization. The aim of this study was to compare the effects of gamma irradiation and supercritical carbon dioxide (scCO₂) treatment on the physicochemical properties of different hyaluronan (HA)- and/or gelatin (GEL)-based hydrogels and the cellular response of human bone marrow-derived mesenchymal stem cells (hBMSC). Hydrogels were photo-polymerized from methacrylated HA, methacrylated GEL, or a mixture of GEL/HA. The composition and sterilization methods altered the dissolution behavior of the biopolymeric hydrogels. There were no significant differences in methacrylated GEL release but increased methacrylated HA degradation of gamma-irradiated samples. Pore size/form remained unchanged, while gamma irradiation decreased the elastic modulus from about 29 kPa to 19 kPa compared to aseptic samples. HBMSC proliferated and increased alkaline phosphatase activity (ALP) particularly in aseptic and gamma-irradiated methacrylated GEL/HA hydrogels alike, while scCO₂ treatment had a negative effect on both proliferation and osteogenic differentiation. Thus, gamma-irradiated methacrylated GEL/HA hydrogels are a promising base for multi-component bone substitute materials.

Immobilization of Alpha Acetolactate Decarboxylase in Hybrid Gelatin/Alginate Support for Application to Reduce Diacetyl Off-Flavor in Beer

Beer production is the largest among alcoholic beverages. Its production process is complex and demands several steps. Lager beers commonly present an off-flavor of butter that is due to the presence of diacetyl, and to avoid such a problem, a long period of maturation (3–5 weeks) is required. Another way is the application of (α-acetolactate decarboxylase) ALDC to accelerate the process. The objectives of the present work were to develop a low-cost support using gelatin, a residue from capsules from the nutraceutical industry, to immobilize the ALDC enzyme. For this, the yield, efficiency and activity recovered, and the stability of free and immobilized enzymes at different temperatures and pH were evaluated. To evaluate the capacity of immobilized enzymes when applied directly to beer and their operational stability, three concentrations of glutaraldehyde (1%, 2.5% and 5%) were tested in distilled water as a cross-linking agent. The best results obtained were 95.6%, 27.0% and 23.6%, respectively, for yield, efficiency and activity recovery. Immobilization provided a high activity over a wide pH range. The immobilized enzyme showed greater stability at temperatures of 50 and 60 °C. The immobilized derivative showed adequate reuse capacity, and its dehydrated form had excellent activity after long periods of storage.

Substance P&dimethyloxallyl glycine-loaded carboxymethyl chitosan/gelatin hydrogel for wound healing

Recent efforts have focused on preparing drug-loaded hydrogel for wound healing. In order to obtain an ideal hydrogel dressing for skin wound repair, a carboxymethyl chitosan-gelatin hydrogel was prepared for co-delivery of SP (substance P) and DMOG (dimethyloxallyl glycine) by a chemical cross-linking method using genipin as the cross-linking agent. The synthesized hydrogels have good biocompatibility and physicochemical properties due to the low toxicity of the hydrogel material. The three-dimensional network structure of the hydrogels supports cell migration and proliferation, and the combination of SP and DMOG drugs exhibited strong effects on cell proliferation. Moreover, the co-loaded drug hydrogels could significantly promote wound healing in vivo, and provide a potential hydrogel for wound healing.

A New Method to Determine Antioxidant Activities of Biofilms Using a pH Indicator (Resazurin) Model System

Biopolymeric films were prepared with gelatin, plasticizer, and three different types of antioxidants (ascorbic acid, phytic acid, and BHA) corresponding to different mechanisms in activity. The antioxidant activity of films was monitored for 14 storage days upon color changes using a pH indicator (resazurin). The instant antioxidant activity of films was measured by a DPPH free radical test. The system using resazurin was composed of an agar, an emulsifier, and soybean oil to simulate a highly oxidative oil-based food system (AES-R). Gelatin-based films (GBF) containing phytic acid showed higher tensile strength and energy to break than all other samples due to the increased intermolecular interactions between phytic acid and gelatin molecules. The oxygen barrier properties of GBF films containing ascorbic acid and phytic acid increased due to the increased polarity, while GBF films containing BHA showed increased oxygen permeability compared to the control. According to "a-value" (redness) of the AES-R system tested with films, films incorporating BHA showed the most retardation of lipid oxidation in the system. This retardation corresponds to 59.8% antioxidation activity at 14 days, compared with the control. Phytic acid-based films did not show antioxidant activity, whereas ascorbic acid-based GBFs accelerated the oxidation process due to its prooxidant activity. The comparison between the DPPH free radical test and the control showed that the ascorbic acid and BHA-based GBFs showed highly effective free radical scavenging behavior (71.7% and 41.7%, respectively). This novel method using a pH indicator system can potentially determine the antioxidation activity of biopolymer films and film-based samples in a food system.

Characterization of Dual-Layer Hybrid Biomatrix for Future Use in Cutaneous Wound Healing

A skin wound without immediate treatment could delay wound healing and may lead to death after severe infection (sepsis). Any interruption or inappropriate normal wound healing, mainly in these wounds, commonly resulted in prolonged and excessive skin contraction. Contraction is a common mechanism in wound healing phases and contributes 40-80% of the original wound size post-healing. Even though it is essential to accelerate wound healing, it also simultaneously limits movement, mainly in the joint area. In the worst-case scenario, prolonged contraction could lead to disfigurement and loss of tissue function. This study aimed to fabricate and characterise the elastin-fortified gelatin/polyvinyl alcohol (PVA) film layered on top of a collagen sponge as a bilayer hybrid biomatrix. Briefly, the combination of halal-based gelatin (4% (w/v)) and PVA ((4% (w/v)) was used to fabricate composite film, followed by the integration of poultry elastin (0.25 mg/mL) and 0.1% (w/v) genipin crosslinking. Furthermore, further analysis was conducted on the composite bilayer biomatrix's physicochemical and mechanical strength. The bilayer biomatrix demonstrated a slow biodegradation rate (0.374967 ± 0.031 mg/h), adequate water absorption (1078.734 ± 42.33%), reasonable water vapour transmission rate (WVTR) (724.6467 ± 70.69 g/m² h) and porous (102.5944 ± 28.21%). The bilayer biomatrix also exhibited an excellent crosslinking degree and was mechanically robust. Besides, the elastin releasing study presented an acceptable rate post-integration with hybrid biomatrix. Therefore, the ready-to-use bilayer biomatrix will benefit therapeutic effects as an alternative treatment for future diabetic skin wound management.

Gallic Acid Crosslinked Gelatin and Casein Based Composite Films for Food Packaging Applications

In the current work, we fabricated gelatin–casein-based edible films (GC-EFs) crosslinked with gallic acid (GA). We analyzed the physiochemical characteristics, crystallinity, thermal stability, and surface properties of the EFs using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). It was found that the edible films possessed a semi-crystalline structure. Addition of GA enhanced the thermal stability of the edible films as well as the surface properties of the films. It was found that a higher concentration of GA (4–5% w/v) significantly improved the surface properties, observed in the surface and cross-sectional examination of SEM micrographs. EFs containing higher amounts of GA showed more compact and denser structures with smoother and more homogeneous surfaces than the control samples. In addition, swelling degree (SD), thickness, water solubility (WS), moisture content (MC), and water vapor permeability (WVP) were found to be low in EFs containing more GA concentration. Mechanical parameters revealed that the Young modulus (Ym) and tensile strength (TS) increased with a rise in GA concentration, and elongation at break (EB) reduced with a rise in GA concentration. In transparency and color analysis, it was observed that GA positively affected the transparency of the edible films.

Topography and physical properties of carboxymethyl cellulose films assembled with calcium and gelatin at different temperature and humidity

Effects of the environmental temperature and relative humidity of drying conditions on the surface ultrastructure of carboxymethyl cellulose (CMC) films were investigated by atomic force microscopy. The mechanical and water vapor barrier properties of the films were also evaluated. The results showed that CMC molecules self-assembled into a uniform network at the solution of 5% calcium chloride. And continuous structure was formed of composite mixture with the CMC/gelatin ratio in 1:1. The CMC/Gel film forming solution was respectively dried at 2-8 °C, 23 °C, 50 °C and 23 °C with ventilation to obtain films. The size and numbers of holes on the films surface were affected by the temperature and relative humidity. Correspondingly, the mechanical properties and water vapor permeability were altered with the films structure. Moreover, the surface structure of the composite films was changed by the infiltration and delivery of water vapor when films were stored at 2-8 °C and -20 °C for days.

Crosslinkers for polysaccharides and proteins: Synthesis conditions, mechanisms, and crosslinking efficiency, a review

Polysaccharides and proteins are important macromolecules for developing hydrogels devoted to biomedical applications. Chemical hydrogels offer chemical, mechanical, and dimensional stability than physical hydrogels due to the chemical bonds among the chains mediated by crosslinkers. There are many crosslinkers to synthesize polysaccharides and proteins based on hydrogels. In this review, we revisited the crosslinking reaction mechanisms between synthetic or natural crosslinkers and polysaccharides or proteins. The selected synthetic crosslinkers were glutaraldehyde, carbodiimide, boric acid, sodium trimetaphosphate, N,N'-methylene bisacrylamide, and polycarboxylic acid, whereas the selected natural crosslinkers included transglutaminase, tyrosinase, horseradish peroxidase, laccase, sortase A, genipin, vanillin, tannic acid, and phytic acid. No less important are the reactions involving click chemistry and the macromolecular crosslinkers for polysaccharides and proteins. Literature examples of polysaccharides or proteins crosslinked by the different strategies were presented along with the corresponding highlights. The general mechanism involved in chemical crosslinking mediated by gamma and UV radiation was discussed, with particular attention to materials commonly used in digital light processing. The evaluation of crosslinking efficiency by gravimetric measurements, rheology, and spectroscopic techniques was presented. Finally, we presented the challenges and opportunities to create safe chemical hydrogels for biomedical applications.

Engineering Hydrogels for the Development of Three-Dimensional In Vitro Models

The superiority of in vitro 3D cultures over conventional 2D cell cultures is well recognized by the scientific community for its relevance in mimicking the native tissue architecture and functionality. The recent paradigm shift in the field of tissue engineering toward the development of 3D in vitro models can be realized with its myriad of applications, including drug screening, developing alternative diagnostics, and regenerative medicine. Hydrogels are considered the most suitable biomaterial for developing an in vitro model owing to their similarity in features to the extracellular microenvironment of native tissue. In this review article, recent progress in the use of hydrogel-based biomaterial for the development of 3D in vitro biomimetic tissue models is highlighted. Discussions of hydrogel sources and the latest hybrid system with different combinations of biopolymers are also presented. The hydrogel crosslinking mechanism and design consideration are summarized, followed by different types of available hydrogel module systems along with recent microfabrication technologies. We also present the latest developments in engineering hydrogel-based 3D in vitro models targeting specific tissues. Finally, we discuss the challenges surrounding current in vitro platforms and 3D models in the light of future perspectives for an improved biomimetic in vitro organ system.

Protein materials as sustainable non- and minimally invasive strategies for biomedical applications

Protein-based materials have found applications in a wide range of biomedical fields because of their biocompatibility, biodegradability and great versatility. Materials of different physical forms including particles, hydrogels, films, fibers and microneedles have been fabricated e.g. as carriers for drug delivery, factors to promote wound healing and as structural support for the generation of new tissue. This review aims at providing an overview of the current scientific knowledge on protein-based materials, and selected preclinical and clinical studies will be reviewed in depth as examples of the latest progress within the field of protein-based materials, specifically focusing on non- and minimally invasive strategies mainly for topical application.

Preclinical efficacy study of a porous biopolymeric scaffold based on gelatin-hyaluronic acid-chondroitin sulfate in a porcine burn injury model: role of critical molecular markers (VEGFA, N-cadherin, COX-2), gamma sterilization efficacy and a comparison of healing potential to Integra™

Development of scaffold from biopolymers can ease the requirements for donor skin autograft and plays an effective role in the treatment of burn wounds. In the current study, a porous foam based, bilayered hydrogel scaffold was developed using gelatin, hyaluronic acid and chondroitin sulfate (G-HA-CS). The fabricated scaffold was characterized physicochemically for pre- and post-sterilization efficacy by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA).In-vitrostudies proved that the scaffold promoted cellular proliferation. The efficacy of G-HA-CS scaffold was compared with Integra™ at different time points (7, 14, 21 and 42 days), in a swine second degree burn wound model. Remarkable healing potential of the scaffold was evident from the wound contraction rate, reduction of IL-6, TNF-αand C3. The expression of healing markers TGF-β1 and collagen 1 revealed significant skin regeneration with regulated fibroblast activation towards the late phase of healing (p< 0.001 at day 21 and 42 vs. control). Expression of Vascular Endothelial Growth Factor A (VEGFA), vimentin and N-cadherin were found to favor angiogenesis and skin regeneration. Mechanistically, scaffold promoted wound healing by modulation of CD-45, cyclooxygenase-2 and MMP-2. Thus, the promising results with foam based scaffold, comparable to Integra™ in swine burn injury model offer an innovative lead for clinical translation for effective management of burn wound.

Raman spectroscopy assisted biochemical evaluation of L929 fibroblast cells on differentially crosslinked gelatin hydrogels

Biochemical evaluation of cell-matrix interaction using conventional labelling techniques often possesses limitations due to dye entrapment. In contrast, Raman spectroscopy guided approach offers label-free determination of cell-matrix biochemistry. Herein, gelatin (Gel) matrices modified with 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide/ N-Hydroxysuccinimide (EDC/NHS) and glutaraldehyde (GTA) was used as standards for comparative evaluation. Raman spectroscopy was deployed as a label-free approach to investigate interaction of cells with Gel hydrogels. Raman-based approach assisted in evaluation of cell-matrix interactions by identifying key biomolecular signatures retrospecting the fact that L929 fibroblast cells portrayed excellent growth and proliferation kinetics in crosslinked Gel as compared to its bare counterpart. EDC crosslinked hydrogels exhibited superior cell proliferation than its GTA counterparts. Cell proliferation on differentially crosslinked gel was also confirmed using standard MTT Assay and Rhodamine-DAPI staining thus corroborating the fact that Raman spectroscopy can be deployed as a superior label-free alternative towards real-time determination of cell proliferation and growth.

Curcumin-Functionalized Gelatin Films: Antioxidant Materials with Modulated Physico-Chemical Properties

In this paper we used curcumin as a functionalizing agent of gelatin films with the aim to get antioxidant materials with modulated physico-chemical properties. To this aim, we prepared gelatin films at different contents of curcumin up to about 1.2 wt%. The as-prepared films, as well as glutaraldehyde crosslinked films, were submitted to several tests: swelling, water solubility, differential scanning calorimetry, X-ray diffraction, mechanical tests and curcumin release. The radical scavenging activity of the as-prepared films is similar to that of free curcumin, indicating remarkable antioxidant properties. All the other tested properties vary as a function of curcumin content and/or the presence of the crosslinking agent. In particular, the films exhibit sustained curcumin release in different solvents. Thanks to its biocompatibility, biodegradability and lack of antigenicity, gelatin uses span from food processing to packaging and biomaterials. It follows that the modulated properties exhibited by the functionalized materials developed in this work can be usefully employed in different application fields.

Microwave-assisted Preparation of Cross-linked Gelatin-Paracetamol Matrices: Optimization Using the D-optimal Design

Objectives

This study was conducted to assess the effect of microwave heating on the preparation of paracetamol cross-linked gelatin matrices by using the design of experiment (DoE) approach and explore the influence of the duration of microwave irradiation, the concentrations of crosslinker, and the amount of sodium bicarbonate (salt) on paracetamol release. These parameters were also compared with those of the matrices prepared via conventional heating.

Materials and Methods

Twenty gel matrices were prepared with different durations of microwave irradiation, amounts of maize, and concentrations of sodium bicarbonate as suggested by Design Expert (DX®). The percentage drug release, the coefficient of variance (CV) in release, and the mean dissolution time (MDT) were the properties explored in the designed experimentation.

Results

Target responses were dependent on microwave irradiation time, cross-linker amount, and salt concentration. Classical and microwave heating did not demonstrate statistically significant difference in modifying the percentage of drug released from the matrices. However, the CVs of microwave-assisted formulations were lower than those of the gel matrices prepared via classical heating. Thus, microwave heating produced lesser variations in drug release. The optimized gel matrices demonstrated that the observed percentage of drug release, CV, and MDT were within the prediction interval generated by DX®. The release mechanism of the matrix formulations followed the Peppas-Korsmeyer anomalous transport model.

Conclusion

The DoE-supported microwave-assisted approach could be applied to optimize the critical factors of drug release with less variation.

Novel drug-loaded film forming patch based on gelatin and snail slime

Gelatin-based films enriched with snail slime are proposed as novel biodegradable and naturally bioadhesive patches for cutaneous drug delivery. Films (thickness range 163-248 μm) were stretchable and they adhered firmly onto the wetted skin, especially those with high amount (70% V/V) of snail slime extract. Fluconazole was selected as model drug and added to films containing the highest amount of snail slime. The presence of Fluconazole (4.53 ± 0.07% w/w) did not modify significantly the mechanical properties, the swelling degree and the bioadhesive performances of the films. Structural investigations demonstrated that the crystalline form III of the drug changed to the amorphous one, forming an amorphous solid dispersion. Moreover, snail slime prevented the drug recrystallization over time. In vitro permeation studies showed that film exhibited a cumulative drug concentration (over 60% in 24 h) similar to that of the control solution containing 20% w/V of ethanol. Fluconazole-loaded gelatin films proved to be effective towards clinical isolates of Candida spp. indicating that the drug maintained its remarkable antifungal activity once formulated into gelatin and snail slime-based films. In conclusion, snail slime, thanks to its peculiar composition, has proved to be responsible of optimal skin adhesion, film flexibility and of the formation of a supersaturating drug delivery system able to increase skin permeation.

Development and in vitro evaluation of mucoadhesive gelatin films for the vaginal delivery of econazole

Several strategies have been explored to obtain effective econazole nitrate (ECN) concentrations at the site of application for a prolonged time. In this paper, different gelatin-based film formulations for vaginal application were investigated, containing ECN (10% w/w with respect to gelatin) as pure drug or as drug-solid dispersions (SD). For the production of SD, different polymers were evaluated: polyvinylpyrrolidone (PVP), Soluplus® (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) and Gelucire® 50/13 (mixture of mono-, di- and triglycerides of fatty acids, esters of PEG 1500 and free PEG). Gelucire®-SD showed the best solubility enhancement, increasing 9.2 times the ECN solubility in pH 4.5 solution respect to pure drug; DSC and XRD analysis confirmed the crystalline form of the drug. XRD results evidenced that all gelatin-based films, containing either the drug or the SD, underwent the topotactic transformation of ECN into crystalline econazole (EC), owing to a strong interaction between the drug and the gelatin. Films containing Gelucire®-based SD displayed lower brittleness and rigidity with respect to the other samples; moreover they demonstrated good structural integrity after 24 h of incubation in the acidic solution (swelling degree of about 350%). Then, Gelucire®-SD based films were compared with the corresponding formulations cross-linked by genipin (2% w/w). The addition of genipin did not interfere with the drug-gelatin interaction. Gelucire®-SD based films showed similar release profiles to neat gelatin films, enhancing the drug release in the first 5 h and controlling the EC release over time, avoiding the use of a crosslinking additive. Finally, gelatin films containing Gelucire® solid dispersion displayed good adhesiveness and anti-Candida activity. Overall, results support the potential use of this film formulation as noncytotoxic EC delivery system for the treatment of vaginal candidiasis.

Effect of sterilization treatment on mechanical properties, biodegradation, bioactivity and printability of GelMA hydrogels

Gelatin methacryloyl (GelMA) hydrogel scaffolds and GelMA-based bioinks are widely used in tissue engineering and bioprinting due to their ability to support cellular functions and new tissue development. Unfortunately, while terminal sterilization of the GelMA is a critical step for translational tissue engineering applications, it can potentially cause thermal or chemical modifications of GelMA. Thus, understanding the effect of terminal sterilization on GelMA properties is an important, though often overlooked, aspect of material design for translational tissue engineering applications. To this end, we characterized the effects of FDA-approved terminal sterilization methods (autoclaving, ethylene oxide treatment, and gamma (γ)-irradiation) on GelMA prepolymer (bioink) and GelMA hydrogels in terms of the relevant properties for biomedical applications, including mechanical strength, biodegradation rate, cell culture in 2D and 3D, and printability. Autoclaving and ethylene oxide treatment of the GelMA decreased the stiffness of the hydrogel, but the treatments did not modify the biodegradation rate of the hydrogel; meanwhile, γ-irradiation increased the stiffness, reduced the pore size and significantly slowed the biodegradation rate. None of the terminal sterilization methods changed the 2D fibroblast or endothelial cell adhesion and spreading. However, ethylene oxide treatment significantly lowered the fibroblast viability in 3D cell culture. Strikingly, γ-irradiation led to significantly reduced ability of the GelMA prepolymer to undergo sol-gel transition. Furthermore, printability studies showed that the bioinks prepared from γ-irradiated GelMA had significantly reduced printability as compared to the GelMA bioinks prepared from autoclaved or ethylene oxide treated GelMA. These results reveal that the choice of the terminal sterilization method can strongly influence important properties of GelMA bioink and hydrogel. Overall, this study provides further insight into GelMA-based material design with consideration of the effect of terminal sterilization.

Mechanically Reinforced Gelatin Hydrogels by Introducing Slidable Supramolecular Cross-Linkers

Tough mechanical properties are generally required for tissue substitutes used in regeneration of damaged tissue, as these substitutes must be able to withstand the external physical force caused by stretching. Gelatin, a biopolymer derived from collagen, is a biocompatible and cell adhesive material, and is thus widely utilized as a component of biomaterials. However, the application of gelatin hydrogels as a tissue substitute is limited owing to their insufficient mechanical properties. Chemical cross-linking is a promising method to improve the mechanical properties of hydrogels. We examined the potential of the chemical cross-linking of gelatin hydrogels with carboxy-group-modified polyrotaxanes (PRXs), a supramolecular polymer comprising a poly(ethylene glycol) chain threaded into the cavity of α-cyclodextrins (α-CDs), to improve mechanical properties such as stretchability and toughness. Cross-linking gelatin hydrogels with threading α-CDs in PRXs could allow for freely mobile cross-linking points to potentially improve the mechanical properties. Indeed, the stretchability and toughness of gelatin hydrogels cross-linked with PRXs were slightly higher than those of the hydrogels with the conventional chemical cross-linkers 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC)/N-hydroxysuccinimide (NHS). In addition, the hysteresis loss of gelatin hydrogels cross-linked with PRXs after repeated stretching and relaxation cycles in a hydrated state was remarkably improved in comparison with that of conventional cross-linked hydrogels. It is considered that the freely mobile cross-linking points of gelatin hydrogels cross-linked with PRXs attenuates the stress concentration. Accordingly, gelatin hydrogels cross-linked with PRXs would provide excellent mechanical properties as biocompatible tissue substitutes exposed to a continuous external physical force.

Multiplatform Protein Detection and Quantification Using Glutaraldehyde-Induced Fluorescence for 3D Systems

Glutaraldehyde (GTA) is a dialdehyde used as biological fixative and its interaction with proteins like bovine serum albumin (BSA) has been well described. Additionally, GTA is known to induce fluorescence when interacting with BSA molecules. In this work, it is developed a new sensitive and reproducible method for BSA quantification using GTA crosslinking to endow fluorescence to BSA molecules. This method can be used with standard lab equipment, providing a low cost, fast-tracking and straightforward approach for BSA quantification. Techniques such as confocal laser scanning microscopy (CLSM) and spectrofluorometry are applied for quantitative assessment, and widefield fluorescence microscopy for qualitative assessment. Qualitative and quantitative correlations between BSA content and GTA-induced fluorescence are verified. BSA concentrations as low as 62.5 μg/mL are detected using CLSM. This method can be highly advantageous for protein quantification in three-dimensional hydrogel systems, specially to evaluate protein loading/release in protein delivery or molecular imprinting systems. Graphical Abstract Preparation and analysis of glutaraldehyde-induced protein-fluorescence in 3D hydrogels. Alginate-methacrylate hydrogels containing varying amounts of bovine serum albumin (BSA) are prepared by photopolymerization and then incubated in glutaraldehyde solutions. Samples observation is performed using confocal laser scanning microscopy, spectrofluorometry and widefield fluorescence microscopy. Data is processed and retrieves a quantitative correlation between protein content and fluorescence levels.

Genipin-Crosslinked Donor Sclera for Posterior Scleral Contraction/Reinforcement to Fight Progressive Myopia

Purpose

Myopia has become a global public health problem, particularly in East Asia where myopic retinopathy has become one of the leading causes of blindness and visual impairment in the elderly population. The purpose of this study was to evaluate the efficacy of posterior scleral contraction/reinforcement (PSCR) surgery on controlling the progressive elongation of axial length of highly myopic eyes in young patients.

Methods

This is a prospective self-controlled interventional case series. Forty young patients (<18-years old) with progressive high myopia received PSCR with a genipin-crosslinked donor scleral strip for one eye and the fellow eye served as concurrent control without surgery. The main outcome measurement was the change of axial length over 2 to 3 years of follow-up.

Results

Immediately after the surgery, axial length was shortened and subsequently increased by 0.32 mm over the follow-up period. In contrast, axial length of the fellow eyes increased by 0.82 mm over the same period (P < 0.001, paired t-test). PSCR delayed axial elongation in eyes with or without staphyloma. No significant change of visual acuity, cornea refractive power, or retina thickness was noted between the surgery and fellow eyes. None of the patients lost visual acuity compared with the baseline. The procedure was well tolerated with only temporary corneal refractive axis shifts that recovered by the 6-month postsurgical visit.

Conclusions

PSCR with genipin-crosslinked sclera is safe and effective to restrain eye globe elongation in young patients within a 2- to 3-year follow-up period.

Cryostructuring of polymer systems. 47. Preparation of wide porous gelatin-based cryostructurates in sterilizing organic media and assessment of the suitability of thus formed matrices as spongy scaffolds for 3D cell culturing

New gelatin-based cryostructurates have been elaborated and tested as scaffolds for three-dimensional (3D) cell culturing. Scaffold preparation included dissolution of Type A gelatin in dimethylsulfoxide, freezing of such solution, cryoextraction of crystalline phase with cold ethanol, cross-linking of gelatin with carbodiimide in ethanol medium, treatment of the matrix with ethanolic solution of Tris and tanning of the matrix with formaldehyde dissolved in ethanol. The use of organic media during all the preparation stages ensured the sterility of the scaffolds. The matrices thus prepared were seeded with human adipose tissue multipotent mesenchymal stromal cells to confirm the biocompatibility of scaffolds and their possibility to provide necessary environment for the cell growth and differentiation. The cells attached onto the surface of the pore walls, proliferated and differentiated into osteogenic and adipogenic lineages. These results demonstrate that gelatin-based cryostructurates prepared in the sterility ensuring organic media can be used as scaffolds for tissue engineering purposes.

Atmospheric Pressure Non-Equilibrium Plasma as a Green Tool to Crosslink Gelatin Nanofibers

Electrospun gelatin nanofibers attract great interest as a natural biomaterial for cartilage and tendon repair despite their high solubility in aqueous solution, which makes them also difficult to crosslink by means of chemical agents. In this work, we explore the efficiency of non-equilibrium atmospheric pressure plasma in stabilizing gelatin nanofibers. We demonstrate that plasma represents an innovative, easy and environmentally friendly approach to successfully crosslink gelatin electrospun mats directly in the solid state. Plasma treated gelatin mats display increased structural stability and excellent retention of fibrous morphology after immersion in aqueous solution. This method can be successfully applied to induce crosslinking both in pure gelatin and genipin-containing gelatin electrospun nanofibers, the latter requiring an even shorter plasma exposure time. A complete characterization of the crosslinked nanofibres, including mechanical properties, morphological observations, stability in physiological solution and structural modifications, has been carried out in order to get insights on the occurring reactions triggered by plasma.

Electrospun polycaprolactone/gelatin composites with enhanced cell-matrix interactions as blood vessel endothelial layer scaffolds

During the fabrication of tissue engineering scaffolds and subsequent tissue regeneration, surface bioactivity is vital for cell adhesion, spreading, and proliferation, especially for endothelium dysfunction repair. In this paper, synthetic polymer polycaprolactone (PCL) was blended with natural polymer gelatin at four different weight ratios followed by crosslinking (i.e., 100:0, 70:30, 50:50, 30:70, labeled as PCL-C, P7G3-C, P5G5-C, and P3G7-C) to impart enhanced bioactivity and tunable mechanical properties. The PCL/gelatin blends were first dissolved in 2,2,2-trifluroethanol (TFE) and supplementary acetic acid (1% relative to TFE) solvent, electrospun, and then cross-linked to produce PBS-proof fibrous scaffolds. Scanning electron micrographs (SEM) indicated that fibers of each sample were smooth and homogeneous, with the fiber diameters increasing from 1.01±0.51μm to 1.61±0.46μm as the content of gelatin increased. While thermal resistance and crystallization of the blends were affected by the presence of gelatin, as reflected by differential scanning calorimetry (DSC) results, water contact angle (WCA) tests confirmed that the scaffold surfaces became more hydrophilic. Tensile tests showed that PCL-C and P7G3-C scaffolds had mechanical properties comparable to those of human coronary arteries. As for cytocompatibility, skeleton staining images showed that human mesenchymal stem cells (hMSCs) had more favorable binding sites on PCL/gelatin scaffolds than those on PCL scaffolds. Cell proliferation assays revealed that P7G3-C scaffolds could support the most number of hMSCs. The results of this study demonstrated the enhanced cell-matrix interactions and potential use of electrospun PCL/gelatin scaffolds in the tissue engineering field, especially in wound dressings and endothelium regeneration.

Sterilization of collagen scaffolds designed for peripheral nerve regeneration: Effect on microstructure, degradation and cellular colonization

In this study we investigated the impact of three different sterilization methods, dry heat (DHS), ethylene oxide (EtO) and electron beam radiation (β), on the properties of cylindrical collagen scaffolds with longitudinally oriented pore channels, specifically designed for peripheral nerve regeneration. Scanning electron microscopy, mechanical testing, quantification of primary amines, differential scanning calorimetry and enzymatic degradation were performed to analyze possible structural and chemical changes induced by the sterilization. Moreover, in vitro proliferation and infiltration of the rat Schwann cell line RSC96 within the scaffolds was evaluated, up to 10days of culture. No major differences in morphology and compressive stiffness were observed among scaffolds sterilized by the different methods, as all samples showed approximately the same structure and stiffness as the unsterilized control. Proliferation, infiltration, distribution and morphology of RSC96 cells within the scaffolds were also comparable throughout the duration of the cell culture study, regardless of the sterilization treatment. However, we found a slight increase of chemical crosslinking upon sterilization (EtO<DHS<β), together with an enhanced resistance to denaturation of the EtO treated scaffolds and a significantly accelerated enzymatic degradation of the β sterilized scaffolds. The results demonstrated that β irradiation impaired the scaffold properties to a greater extent, whereas EtO exposure appeared as the most suitable method for the sterilization of the proposed scaffolds.

An innovative co-axial system to electrospin in situ crosslinked gelatin nanofibers

Crosslinking of gelatin nanofibers maintaining a fibrous morphology after exposure to an aqueous solution is still a challenge. In this work, we developed an innovative method based on the use of an ad hoc designed co-axial needle to fabricate gelatin mats crosslinked with a very small amount of genipin and still able to retain their morphology when immersed in aqueous solution. Genipin-containing gelatin nanofibers are obtained by allowing mixing of the two solutions just within the needle. Genipin content of the electrospun mats can be modulated by varying feeding rates of the inner and outer solutions and their relative concentration. A subsequent thermal treatment of the mats, performed at 55 °C or 37 °C for 1 or 3 days and followed by rapid rinsing in ethanol and then in PB, allows one to obtain highly crosslinked gelatin nanofibers that perfectly maintain their morphology after immersion in an aqueous solution, display improved mechanical properties and enhanced stability. This new approach allows us to achieve gelatin mat stabilization using a very small amount of genipin with respect to other methods and to avoid post-treatment of the mats with the crosslinking agent, with a consequent significant reduction of the final cost of the materials. Moreover, in vitro tests demonstrate that the crosslinked mats support normal human primary chondrocyte culture, promoting their differentiation.

Multi-Layered Scaffolds for Osteochondral Tissue Engineering: In Vitro Response of Co-Cultured Human Mesenchymal Stem Cells

A promising strategy for osteochondral interface regeneration consists in the development of hybrid scaffolds, composed of distinct but integrated layers able to mimic the different regions of cartilage and bone. We developed multi-layered scaffolds by assembling a gelatin layer with layers containing different amounts of gelatin and hydroxyapatite nanocrystals, and using a gelatin solution (as a glue) to stick layers together. The scaffolds exhibit a high, interconnected porosity and mechanical properties varying with composition along the thickness of the scaffolds up to values of compressive stress and modulus of about 1 and 14 MPa, respectively. In vitro tests demonstrate that the different layers of the scaffolds promote chondrogenic and osteogenic differentiation of Human Mesenchimal Stem Cells (hMSC).