Biocompatibility of artificial bone based on vancomycin loaded mesoporous silica nanoparticles and calcium sulfate composites

Injectable Bone Cement Reinforced with Gold Nanodots Decorated rGO-Hydroxyapatite Nanocomposites, Augment Bone Regeneration

Interest in the development of new generation injectable bone cements having appropriate mechanical properties, biodegradability, and bioactivity has been rekindled with the advent of nanoscience. Injectable bone cements made with calcium sulfate (CS) are of significant interest, owing to its compatibility and optimal self-setting property. Its rapid resorption rate, lack of bioactivity, and poor mechanical strength serve as a deterrent for its wide application. Herein, a significantly improved CS-based injectable bone cement (modified calcium sulfate termed as CS_mod ), reinforced with various concentrations (0-15%) of a conductive nanocomposite containing gold nanodots and nanohydroxyapatite decorated reduced graphene oxide (rGO) sheets (AuHp@rGO), and functionalized with vancomycin, is presented. The piezo-responsive cement exhibits favorable injectability and setting times, along with improved mechanical properties. The antimicrobial, osteoinductive, and osteoconductive properties of the CS_mod cement are confirmed using appropriate in vitro studies. There is an upregulation of the paracrine signaling mediated crosstalk between mesenchymal stem cells and human umbilical vein endothelial cells seeded on these cements. The ability of CS_mod to induce endothelial cell recruitment and augment bone regeneration is evidenced in relevant rat models. The results imply that the multipronged activity exhibited by the novel-CS_mod cement would be beneficial for bone repair.

Insight in Superiority of the Hydrophobized Gentamycin in Terms of Antibiotics Delivery to Bone Tissue

Bone infections are a serious problem to cure, as systemic administration of antibiotics is not very effective due to poor bone vascularization. Therefore, many drug delivery systems are investigated to solve this problem. One of the potential solutions is the delivery of antibiotics from poly(L-actide-co-glycolide) (PLGA) nanoparticles suspended in the gellan gum injectable hydrogel. However, the loading capacity and release kinetics of the system based on hydrophilic drugs (e.g., gentamycin) and hydrophobic polymers (e.g., PLGA) may not always be satisfying. To solve this problem, we decided to use hydrophobized gentamycin obtained by ion-pairing with dioctyl sulfosuccinate sodium salt (AOT). Herein, we present a comparison of the PLGA nanoparticles loaded with hydrophobic or hydrophilic gentamycin and suspended in the hydrogel in terms of physicochemical properties, drug loading capacity, release profiles, cytocompatibility, and antibacterial properties. The results showed that hydrophobic gentamycin may be combined in different formulations with the hydrophilic one and is superior in terms of encapsulation efficiency, drug loading, release, and antibacterial efficacy with no negative effect on the NPs morphology or hydrogel features. However, the cytocompatibility of hydrophobic gentamycin might be lower, consequently more extensive study on its biological properties should be provided to evaluate a safe dose.

Hexapeptide induces M2 macrophage polarization via the JAK1/STAT6 pathway to promote angiogenesis in bone repair

Angiogenesis is essential for successful bone defect repair. In normal tissue repair, the physiological inflammatory response is the main regulator of angiogenesis through the activity of macrophages and the cytokines secreted by them. In particular, M2 macrophages which secrete high levels of PDGF-BB are typically considered to promote angiogenesis. A hexapeptide [WKYMVm, (Trp-Lys-Tyr-Met-Val-D-Met-NH2)] has been reported to modulate inflammatory activities. However, the underlying mechanisms by which WKYMVm regulates macrophages remain unclear. In this study, the possible involvement by which WKYMVm induces the polarization of macrophages and affects their behaviors was evaluated. In vitro results showed that macrophages were induced to an M2 rather than M1 phenotype and the M2 phenotype was enhanced by WKYMVm through activation of the JAK1/STAT6 signaling pathway. It was also found that WKYMVm played an important role in the PDGF-BB production increase and proangiogenic abilities in M2 macrophages. Consistent with the results in vitro, the elevated M2/M0 ratio induced by WKYMVm enhanced the formation of new blood vessels in a femoral defect mouse model. These findings suggest that WKYMVm could be a promising alternative strategy for angiogenesis in bone repair by inducing M2 macrophage polarization.

Nanocrystalline Zn2+ and SO42- binary doped fluorohydroxyapatite: A novel biomaterial with enhanced osteoconductive and osteoinconductive properties

In this study, we have successfully doped hydroxyapatite (HA) with zinc (Zn²⁺), sulphate (SO₄^2-) and fluoride (F^-) ions to develop a new composition of bioceramic, Ca_10-x Zn_x(PO₄)_6-y(SO₄)_y(OH)_2-z-yF_z(SO₄)_y, (x = 0, 0.2, 0.6, 1.0, y = 0, 0.5 and z = 0,1.0 mol), using wet precipitation method. The obtained materials were analysed using XRD, FTIR, FESEM, and XPS techniques to investigate the phase purity, particle morphology and elemental composition, respectively. A model anticancer drug (Doxorubicin, DOX) was loaded onto the surface of the Zn/SO₄-FHA materials. About 100% loading of DOX with a controlled release profile was obtained. Degradation of materials in Simulated body fluid (SBF) was greatly improved with the incorporation of Zn²⁺/SO₄^2- ions in comparison to HA/FHA, which makes it highly bioactive materials. In vitro cell viability and adhesion of Human fetal osteoblast (hFOB) cell were investigated. Cell viability has demonstrated that the hFOB cells proliferated at a high rate on Zn/SO₄-FHA materials, confirming the in vitro biocompatibility of the materials. Alkaline phosphatase (ALP) activity and intracellular calcium deposition of hFOB cells seeded on 1ZnSO₄-FHA disc surface was statistically higher than observed on pure HA and FHA discs, indicating that hFOB cells differentiated into mature osteoblasts on 1Zn/SO₄-FHA disc surfaces. Taken together, our results suggest that HA substituted by (Zn²⁺, 0.2 mol), (SO₄^2-, 0.5 mol) and (F^-, 1 mol) (1Zn/SO₄-FHA) material was a promising material for hard tissue scaffolds.

Biphasic Calcium Sulfate as an Alternative Grafting Material in Various Dental Applications

Various grafting materials have been used in oral and periodontal surgeries to augment and rebuild bone intraorally. Calcium sulfate, a synthetic material, also known as an alloplast, has been used for decades in orthopedics, plastic surgery, and oncologic and maxillofacial surgeries for the treatment of osseous deficiencies caused by trauma or inflammation. Biphasic calcium sulfate provides benefits as a short-term space maintainer. Use of biphasic calcium sulfate as the sole material are limited to relatively small osseous defects surrounded by at least 3 bony walls (eg, extraction sockets). Thus, for augmenting large and more complex bone deficiencies Bond Apatite, a composite graft formulation, is indicated. This work will review the various clinical applications of Bond Apatite as an alternative to other graft materials.

Antimicrobial Properties and Osteogenicity of Vancomycin-Loaded Synthetic Scaffolds Obtained by Supercritical Foaming

Advanced porous synthetic scaffolds are particularly suitable for regeneration of damaged tissues, but there is the risk of infections due to the colonization of microorganisms, forming biofilms. Supercritical foaming is an attractive processing method to prepare bone scaffolds, regulating simultaneously the porosity and loading of bioactive compounds without loss of activity. In this work, scaffolds made of poly-ε-caprolactone (50 kDa), containing chitosan and an antimicrobial agent (vancomycin), were processed by supercritical CO₂ foaming for bone regeneration purposes. The obtained scaffolds showed a suitable combination of morphological (porosity, pore size distribution, and interconnectivity), time-dependent in vitro vancomycin release behavior and biological properties (cell viability and proliferation, osteodifferentiation, and tissue-scaffold integration). The scaffolds sustained vancomycin release for more than 2 weeks. Finally, the antimicrobial activity of the scaffolds was tested against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria after 24 h of incubation with full growth inhibition for S. aureus.

Polydopamine and peptide decorated doxorubicin-loaded mesoporous silica nanoparticles as a targeted drug delivery system for bladder cancer therapy

We reported a simple polydopamine (PDA)-based surface modification method to prepare novel targeted doxorubicin-loaded mesoporous silica nanoparticles and peptide CSNRDARRC conjugation (DOX-loaded MSNs@PDA-PEP) for enhancing the therapeutic effects on bladder cancer. Drug-loaded NPs were characterized in terms of size, size distribution, zeta potential, transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) surface area and drug loading content. In vitro drug release indicated that DOX-loaded MSNs@PDA and MSNs@PDA-PEP had similar release kinetic profiles of DOX. The PDA coating well controlled DOX release and was highly sensitive to pH value. Confocal laser scanning microscopy (CLSM) showed that drug-loaded MSNs could be internalized by human bladder cancer cell line HT-1376, and DOX-loaded MSNs@PDA-PEP had the highest cellular uptake efficiency due to ligand-receptor recognition. The antitumor effects of DOX-loaded nanoparticles were evaluated by the MTT assay in vitro and by a xenograft tumor model in vivo, demonstrating that targeted nanocarriers DOX-loaded MSNs@PDA-PEP were significantly superior to free DOX and DOX-loaded MSNs@PDA. The novel DOX-loaded MSNs@PDA-PEP, which specifically recognized HT-1376 cells, can be used as a potential targeted drug delivery system for bladder cancer therapy.

3D-printed porous titanium changed femoral head repair growth patterns: osteogenesis and vascularisation in porous titanium

Osteonecrosis of the femoral head (ONFH) is a major cause of morbidity, and total hip arthroplasty is both traumatic and expensive. Here, we created a gelatine scaffold embedded in uniquely shaped, 3D-printed porous titanium parts, which could attract and promote the proliferation of osteoblasts as well as bone regeneration, as the extracellular matrix (ECM) does in vivo. Interestingly, after hybridisation with platelets, the scaffold exhibited a low yet considerable rate of stable, safe and long-term growth factor release. Additionally, a novel ONFH model was constructed and verified. Scaffolds implanted in this model were found to accelerate bone repair. In conclusion, our scaffold successfully simulates the ECM and considerably accelerates bone regeneration, in which platelets play an indispensable role. We believe that platelets should be emphasised as carriers that may be employed to transport drugs, cytokines and other small molecules to target locations in vivo. In addition, this novel scaffold is a useful material for treating ONFH. An overview of the novel scaffold mimicking the extracellular environment in bone repair. a and b: A gelatine scaffold was cross-linked and freeze-dried within 3D-printed porous titanium. c: Platelets were coated onto the gelatine microscaffold after freeze-drying platelet-rich plasma. d: The microscaffold supported the migration of cells into the titanium pores and their subsequent growth, while the platelets slowly released cell factors, exerting bioactivity.