Synthesis of AS1411-aptamer-conjugated CdTe quantum dots with high fluorescence strength for probe labeling tumor cells

Aptamers: ushering in new hopes in targeted glioblastoma therapy

Glioblastoma, a formidable brain cancer, has remained a therapeutic challenge due to its aggressive nature and resistance to conventional treatments. Recent data indicate that aptamers, short synthetic DNA or RNA molecules can be used in anti-cancer therapy due to their better tumour penetration, specific binding affinity, longer retention in tumour sites and their ability to cross the blood-brain barrier. With the ability to modify these oligonucleotides through the selection process, and using rational design to modify them, post-SELEX aptamers offer several advantages in glioblastoma treatment, including precise targeting of cancer cells while sparing healthy tissue. This review discusses the pivotal role of aptamers in glioblastoma therapy and diagnosis, emphasising their potential to enhance treatment efficacy and also highlights recent advancements in aptamer-based therapies which can transform the landscape of glioblastoma treatment, offering renewed hope to patients and clinicians alike.

Nucleolin-targeted doxorubicin and ICG co-loaded theranostic lipopolymersome for photothermal-chemotherapy of melanoma in vitro and in vivo

Combination therapy using chemo-photothermal therapy (chemo-PTT) shows great efficacy toward tumor ablation in preclinical studies. Besides, lipopolymersomes as a hybrid nanocarriers, integrate advantages of liposomes and polymersomes in a single platform in order to provide tremendous biocompatibility, biodegradability, noteworthy loading efficacy for both hydrophobic and hydrophilic drugs with adjustable drug release and high stability. In this study, a multipurpose lipopolymersome was fabricated for guided chemotherapy-PTT and NIR-imaging of melanoma. A lipopolymerosomal hybrid nanovesicle consisting of equal molar ratio of 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and poly (ethylene glycol)-poly (lactic acid) (PEG-PLA) diblock copolymer (molar ratio 1:1) was fabricated. The nanoparticulate system was prepared through film rehydration technique for encapsulation of doxorubicin (DOX) and indocyanine green (ICG) to form DOX-ICG-LP platform. At the next stage, AS1411 DNA aptamer was conjugated to the surface of lipopolymersome (Apt-DOX-ICG-LP) for selective delivery. The sizes of DOX-ICG-LP and Apt-DOX-ICG-LP were obtained through DLS analysis (61.0 ± 6 and 74 ± 5, respectively). Near Infrared-responsive release pattern of the prepared lipopolymersome was verified in vitro. The formulated platform showed efficient photothermal conversion, and superior stability with acceptable encapsulation efficiency. Consistent with the in vitro studies, NIR-responsive lipopolymersome exhibited significantly higher cellular toxicity for Chemo-PTT versus single anti-cancer treatment. Moreover, superlative tumor shrinkage with favorable survival profile were attained in B16F10 tumor-bearing mice received Apt-DOX-ICG-LP and irradiated with 808 nm laser compared to those treated with either DOX-ICG-LP or Apt-DOX-ICG-LP without laser irradiation. The diagnostic capability of Apt-DOX-ICG-LP was addressed using in vivo NIR imaging, 6 and 24 h post-intravenous administration. The results indicated desirable feature of an established targeted theranostic capability of Apt-DOX-ICG-LP for both diagnostics and dual chemo-PTT of melanoma.

Quantum Dots as a Potential Multifunctional Material for the Enhancement of Clinical Diagnosis Strategies and Cancer Treatments

Quantum dots (QDs) represent a class of nanoscale wide bandgap semiconductors, and are primarily composed of metals, lipids, or polymers. Their unique electronic and optical properties, which stem from their wide bandgap characteristics, offer significant advantages for early cancer detection and treatment. Metal QDs have already demonstrated therapeutic potential in early tumor imaging and therapy. However, biological toxicity has led to the development of various non-functionalized QDs, such as carbon QDs (CQDs), graphene QDs (GQDs), black phosphorus QDs (BPQDs) and perovskite quantum dots (PQDs). To meet the diverse needs of clinical cancer treatment, functionalized QDs with an array of modifications (lipid, protein, organic, and inorganic) have been further developed. These advancements combine the unique material properties of QDs with the targeted capabilities of biological therapy to effectively kill tumors through photodynamic therapy, chemotherapy, immunotherapy, and other means. In addition to tumor-specific therapy, the fluorescence quantum yield of QDs has gradually increased with technological progress, enabling their significant application in both in vivo and in vitro imaging. This review delves into the role of QDs in the development and improvement of clinical cancer treatments, emphasizing their wide bandgap semiconductor properties.

Physico-Chemical Properties of CdTe/Glutathione Quantum Dots Obtained by Microwave Irradiation for Use in Monoclonal Antibody and Biomarker Testing

In this report, we present the results on the physicochemical characterization of cadmium telluride quantum dots (QDs) stabilized with glutathione and prepared by optimizing the synthesis conditions. An excellent control of emissions and the composition of the nanocrystal surface for its potential application in monoclonal antibody and biomarker testing was achieved. Two samples (QDYellow, QDOrange, corresponding to their emission colors) were analyzed by dynamic light scattering (DLS), and their hydrodynamic sizes were 6.7 nm and 19.4 nm, respectively. Optical characterization by UV-vis absorbance spectroscopy showed excitonic peaks at 517 nm and 554 nm. Photoluminescence spectroscopy indicated that the samples have a maximum intensity emission at 570 and 606 nm, respectively, within the visible range from yellow to orange. Infrared spectroscopy showed vibrational modes corresponding to the functional groups OH-C-H, C-N, C=C, C-O, C-OH, and COOH, which allows for the formation of functionalized QDs for the manufacture of biomarkers. In addition, the hydrodynamic radius, zeta potential, and approximate molecular weight were determined by dynamic light scattering (DLS), electrophoretic light scattering (ELS), and static light scattering (SLS) techniques. Size dispersion and the structure of nanoparticles was obtained by Transmission Electron Microscopy (TEM) and by X-ray diffraction. In the same way, we calculated the concentration of Cd2+ ions expressed in mg/L by using the Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-OES). In addition to the characterization of the nanoparticles, the labeling of murine myeloid cells was carried out with both samples of quantum dots, where it was demonstrated that quantum dots can diffuse into these cells and connect mostly with the cell nucleus.

Aptamer-functionalized quantum dots as theranostic nanotools against cancer and bacterial infections: A comprehensive overview of recent trends

Aptamers (Apts) are synthetic nucleic acid ligands that can be engineered to target various molecules, including amino acids, proteins, and pharmaceuticals. Through a series of adsorption, recovery, and amplification steps, Apts are extracted from combinatorial libraries of synthesized nucleic acids. Using aptasensors in bioanalysis and biomedicine can be improved by combining them with nanomaterials. Moreover, Apt-associated nanomaterials, including liposomes, polymeric, dendrimers, carbon nanomaterials, silica, nanorods, magnetic NPs, and quantum dots (QDs), have been widely used as promising nanotools in biomedicine. Following surface modifications and conjugation with appropriate functional groups, these nanomaterials can be successfully used in aptasensing. Advanced biological assays can use Apts immobilized on QD surfaces through physical interaction and chemical bonding. Accordingly, modern QD aptasensing platforms rely on interactions between QDs, Apts, and targets to detect them. QD-Apt conjugates can be used to directly detect prostate, ovarian, colorectal, and lung cancers or simultaneously detect biomarkers associated with these malignancies. Tenascin-C, mucin 1, prostate-specific antigen, prostate-specific membrane antigen, nucleolin, growth factors, and exosomes are among the cancer biomarkers that can be sensitively detected using such bioconjugates. Furthermore, Apt-conjugated QDs have shown great potential for controlling bacterial infections such as Bacillus thuringiensis, Pseudomonas aeruginosa, Escherichia coli, Acinetobacter baumannii, Campylobacter jejuni, Staphylococcus aureus, and Salmonella typhimurium. This comprehensive review discusses recent advancements in the design of QD-Apt bioconjugates and their applications in cancer and bacterial theranostics.

Recent advances in cellulose, pectin, carrageenan and alginate-based oral drug delivery systems

Polymers-based drug delivery systems constitute one of the highly explored thrust areas in the field of the medicinal and pharmaceutical industries. In the past years, the properties of polymers have been modified in context to their solubility, release kinetics, targeted action site, absorption, and therapeutic efficacy. Despite the availability of diverse synthetic polymers for the bioavailability enhancement of drugs, the use of natural polymers is still highly recommended due to their easy availability, accessibility, and non-toxicity. The aim of the review is to provide the available literature of the last five years on oral drug delivery systems based on four natural polymers i.e., cellulose, pectin, carrageenan, and alginate in a concise and tabulated manner. In this review, most of the information is in tabulated form to provide easy accessibility to the reader. The data related to active pharmaceutical ingredients and supported components in different formulations of the mentioned polymers have been made available.

Gene Therapy for Regenerative Medicine

The development of biological methods over the past decade has stimulated great interest in the possibility to regenerate human tissues. Advances in stem cell research, gene therapy, and tissue engineering have accelerated the technology in tissue and organ regeneration. However, despite significant progress in this area, there are still several technical issues that must be addressed, especially in the clinical use of gene therapy. The aims of gene therapy include utilising cells to produce a suitable protein, silencing over-producing proteins, and genetically modifying and repairing cell functions that may affect disease conditions. While most current gene therapy clinical trials are based on cell- and viral-mediated approaches, non-viral gene transfection agents are emerging as potentially safe and effective in the treatment of a wide variety of genetic and acquired diseases. Gene therapy based on viral vectors may induce pathogenicity and immunogenicity. Therefore, significant efforts are being invested in non-viral vectors to enhance their efficiency to a level comparable to the viral vector. Non-viral technologies consist of plasmid-based expression systems containing a gene encoding, a therapeutic protein, and synthetic gene delivery systems. One possible approach to enhance non-viral vector ability or to be an alternative to viral vectors would be to use tissue engineering technology for regenerative medicine therapy. This review provides a critical view of gene therapy with a major focus on the development of regenerative medicine technologies to control the in vivo location and function of administered genes.

Targeted poly(L-glutamic acid)-based hybrid peptosomes co-loaded with doxorubicin and USPIONs as a theranostic platform for metastatic breast cancer

Peptosomes, as a vesicular polypeptide-based system and a versatile carrier for co-delivery of hydrophilic and hydrophobic materials, provide great delivery opportunities due to the intrinsic biocompatibility and biodegradability of the polypeptides backbone. In the current study, a novel poly(L-glutamic acid)-block-polylactic acid di-block copolymer (PGA-PLA) was synthesized in two steps. Firstly, γ-benzyl L-glutamate-N-carboxy anhydride (BLG-NCA) and 3,6-dimethyl-1,4-dioxane-2,5-dione were polymerized using N-hexylamine and benzyl alcohol as initiators to produce poly(γ-benzyl L-glutamate (PBLG) and polylactic acid. Then, PBLG was deprotected to produce PGA. Secondly, PGA was conjugated to the benzyl-PLGA to fabricate PGA-PLA diblock copolymer. The synthesized diblock copolymer was used for the encapsulation of doxorubicin, as hydrophilic anticancer and ultra-small superparamagnetic iron oxide nanoparticles (USPIONs) as hydrophobic contrast agent within aqueous core and bilayer of vesicular peptosome, respectively via double emulsion method. The prepared peptosomes (Pep@USPIONs-DOX) controlled the release of DOX (<15 % of the encapsulated DOX release up to 240 h of incubation at the physiological conditions) while increasing the stability and solubility of the hydrophobic USPIONs. Then, AS1411 DNA aptamer was decorated on the surface of the PGA-PLA peptosomes (Apt-Pep@USPIONs-DOX). The prepared targeted and non-targeted platforms showed spherical morphology with hydrodynamic sizes of 265 ± 52 and 229 ± 44 nm respectively. In vitro cellular cytotoxicity and cellular uptake were studied in nucleolin positive (4T1) and nucleolin negative (CHO) cell lines. Cellular uptake of the targeted formulation was greater than that of non-targeted peptosome, while cellular internalization of these peptosomes was identical in CHO cells. Moreover, targeted peptosomes showed greater toxicity than non-targeted peptosome in 4T1 cell line. The prepared theranostic targeted peptosomes demonstrated improved capability in terms of survival rate, biodistribution, tumor suppression efficiency, and MR imaging in the 4T1 tumor-bearing mice.

Quantum Dot-Based Screening Identifies F3 Peptide and Reveals Cell Surface Nucleolin as a Therapeutic Target for Rhabdomyosarcoma

Active drug delivery by tumor-targeting peptides is a promising approach to improve existing therapies for rhabdomyosarcoma (RMS), by increasing the therapeutic effect and decreasing the systemic toxicity, e.g., by drug-loaded peptide-targeted nanoparticles. Here, we tested 20 different tumor-targeting peptides for their ability to bind to two RMS cell lines, Rh30 and RD, using quantum dots Streptavidin and biotin-peptides conjugates as a model for nanoparticles. Four peptides revealed a very strong binding to RMS cells: NCAM-1-targeting NTP peptide, nucleolin-targeting F3 peptide, and two Furin-targeting peptides, TmR and shTmR. F3 peptide showed the strongest binding to all RMS cell lines tested, low binding to normal control myoblasts and fibroblasts, and efficient internalization into RMS cells demonstrated by the cytoplasmic delivery of the Saporin toxin. The expression of the nucleophosphoprotein nucleolin, the target of F3, on the surface of RMS cell lines was validated by competition with the natural ligand lactoferrin, by colocalization with the nucleolin-binding aptamer AS1411, and by the marked sensitivity of RMS cell lines to the growth inhibitory nucleolin-binding N6L pseudopeptide. Taken together, our results indicate that nucleolin-targeting by F3 peptide represents a potential therapeutic approach for RMS.

PEGylated solid lipid nanoparticles functionalized by aptamer for targeted delivery of docetaxel in mice bearing C26 tumor

OBJECTIVE

Colorectal cancer is one of the most deadly cancers in the world. Docetaxel (DTX) is a potentially important chemotherapeutic agent for the treatment of cancer. Many studies have attempted to improve its bioavailability and efficiency using different nanoparticulate drug delivery systems.

SIGNIFICANCE

In the current study, PEGylated solid lipid nanoparticles (SLNs) containing DTX were prepared and modified with AS1411 anti-nucleolin aptamers to target nucleoin receptors on colorectal cancer cells.

METHODS

Nanoparticles were characterized and the morphology was evaluated. In vitro studies were investigated on murine colon carcinoma (C26) and Chinese hamster ovary (CHO) cell lines. Then in vivo antitumor efficacy and survival analysis were evaluated in mice bearing the C26 tumor model.

RESULTS

Results showed 135-140 nm particle size and about 78% DTX entrapment efficiency for actively targeted samples. PEGylated and aptamer-targeted SLNs containing DTX had the lowest IC₅₀ (0.28 and 0.11 nM for 3 and 6 h incubation respectively) and higher cellular uptake values in the C26 cell line. Also in vivo results demonstrated that PEGylated and aptamer-targeted SLNs containing Docetaxel (Apt-PEG-SLN-DTX) improved antitumor activity and inhibited tumor growth in C26 tumor-bearing mice.

CONCLUSION

These results suggested that PEGylated and aptamer-targeted SLNs containing DTX exhibited efficient characteristics in tumor inhibitory against murine C26 carcinoma model.

Aptamer-Driven Toxin Gene Delivery in U87 Model Glioblastoma Cells

A novel suicide gene therapy approach was tested in U87 MG glioblastoma multiforme cells. A 26nt G-rich double-stranded DNA aptamer (AS1411) was integrated into a vector at the 5' of a mammalian codon-optimized saporin gene, under CMV promoter. With this plasmid termed "APTSAP", the gene encoding ribosome-inactivating protein saporin is driven intracellularly by the glioma-specific aptamer that binds to cell surface-exposed nucleolin and efficiently kills target cells, more effectively as a polyethyleneimine (PEI)-polyplex. Cells that do not expose nucleolin at the cell surface such as 3T3 cells, used as a control, remain unaffected. Suicide gene-induced cell killing was not observed when the inactive saporin mutant SAPKQ DNA was used in the (PEI)-polyplex, indicating that saporin catalytic activity mediates the cytotoxic effect. Rather than apoptosis, cell death has features resembling autophagic or methuosis-like mechanisms. These main findings support the proof-of-concept of using PEI-polyplexed APTSAP for local delivery in rat glioblastoma models.

A Review of Biodegradable Natural Polymer-Based Nanoparticles for Drug Delivery Applications

Biodegradable natural polymers have been investigated extensively as the best choice for encapsulation and delivery of drugs. The research has attracted remarkable attention in the pharmaceutical industry. The shortcomings of conventional dosage systems, along with modified and targeted drug delivery methods, are addressed by using polymers with improved bioavailability, biocompatibility, and lower toxicity. Therefore, nanomedicines are now considered to be an innovative type of medication. This review critically examines the use of natural biodegradable polymers and their drug delivery systems for local or targeted and controlled/sustained drug release against fatal diseases.

Aptamer-Based In Vivo Therapeutic Targeting of Glioblastoma

Glioblastoma (GBM) is the most aggressive, infiltrative, and lethal brain tumor in humans. Despite the extensive advancement in the knowledge about tumor progression and treatment over the last few years, the prognosis of GBM is still very poor due to the difficulty of targeting drugs or anticancer molecules to GBM cells. The major challenge in improving GBM treatment implicates the development of a targeted drug delivery system, capable of crossing the blood–brain barrier (BBB) and specifically targeting GBM cells. Aptamers possess many characteristics that make them ideal novel therapeutic agents for the treatment of GBM. They are short single-stranded nucleic acids (RNA or ssDNA) able to bind to a molecular target with high affinity and specificity. Several GBM-targeting aptamers have been developed for imaging, tumor cell isolation from biopsies, and drug/anticancer molecule delivery to the tumor cells. Due to their properties (low immunogenicity, long stability, and toxicity), a large number of aptamers have been selected against GBM biomarkers and tested in GBM cell lines, while only a few of them have also been tested in in vivo models of GBM. Herein, we specifically focus on aptamers tested in GBM in vivo models that can be considered as new diagnostic and/or therapeutic tools for GBM patients’ treatment.

The Role of RNA and DNA Aptamers in Glioblastoma Diagnosis and Therapy: A Systematic Review of the Literature

Glioblastoma (GBM) is the most lethal primary brain tumor of the central nervous system in adults. Despite advances in surgical and medical neuro-oncology, the median survival is about 15 months. For this reason, initial diagnosis, prognosis, and targeted therapy of GBM represent very attractive areas of study. Aptamers are short three-dimensional structures of single-stranded nucleic acids (RNA or DNA), identified by an in vitro process, named systematic evolution of ligands by exponential enrichment (SELEX), starting from a partially random oligonucleotide library. They bind to a molecular target with high affinity and specificity and can be easily modified to optimize binding affinity and selectivity. Thanks to their properties (low immunogenicity and toxicity, long stability, and low production variability), a large number of aptamers have been selected against GBM biomarkers and provide specific imaging agents and therapeutics to improve the diagnosis and treatment of GBM. However, the use of aptamers in GBM diagnosis and treatment still represents an underdeveloped topic, mainly due to limited literature in the research world. On these bases, we performed a systematic review aimed at summarizing current knowledge on the new promising DNA and RNA aptamer-based molecules for GBM diagnosis and treatment. Thirty-eight studies from 2000 were included and investigated. Seventeen involved the use of aptamers for GBM diagnosis and 21 for GBM therapy. Our findings showed that a number of DNA and RNA aptamers are promising diagnostic and therapeutic tools for GBM management.

3-Aminophenyl Boronic Acid Functionalized Quantum-Dot-Based Ratiometric Fluorescence Sensor for the Highly Sensitive Detection of Tyrosinase Activity

Using the commercially available and economical 6-hydroxycoumarin (6-HC) as the substrate, a dual-emission ratiometric fluorescence sensor was developed to detect tyrosinase (TYR) activity based on 3-aminophenyl boronic acid functionalized quantum dots (APBA-QDs). TYR can catalyze 6-HC, a monohydroxy compound, to form a fluorescence-enhancing o-hydroxy compound, 6,7-dihydroxycoumarin. Owing to the special covalent binding between the o-hydroxyl and boric acid groups, APBA-QDs react with 6,7-dihydroxycoumarin to form a five-membered ring ester dual-emission fluorescence probe for TYR. With an increase in TYR activity, the fluorescence at 675 nm originating from the QDs is gradually quenched, whereas that at 465 nm owing to 6,7-dihydroxycoumarin increases. Referencing the decreasing signal of the dual-emission probe at 675 nm to measure the increasing signal at 465 nm, a ratiometric fluorescence method was established to detect the TYR activity with high sensitivity and selectivity. Under the conditions optimized via response surface methodology, a linear range of 0-0.05 U/mL was obtained for the TYR activity. The detection limit was as low as 0.003 U/mL. This sensing strategy can also be adopted for the rapid screening of the TYR inhibitors.

Targeted MMP-2 responsive chimeric polymersomes for therapy against colorectal cancer

In the current study, polyethylene glycol (PEG) was linked to polylactide (PLA) through the synthetic peptide PVGLIG which can be selectively cleaved by the tumor-associated matrix metalloproteinase 2 (MMP-2) enzyme. The synthesized chimeric triblock polymer of PEG-b-PVGLIG-PLA was implemented to form nanoscale self-assemble chimeric polymersomes. The hydrophobic SN38 was loaded into polymersomes with 70.3% ± 3.0% encapsulation efficiency demonstrating monodispersed spherical morphologies with 172 ± 30 nm dimension. The prepared chimeric polymersomal formulation provided controlled release of SN38 at physiological condition while illustrating seven-folds higher release rate when exposed to MMP-2 enzyme. At the next stage, AS1411 aptamer was conjugated onto the surface of MMP-2 responsive polymersomal formulation in order to provide guided drug delivery against nucleolin positive cells. In vitro cellular toxicity assay against C26 cell line (nucleolin positive) demonstrated significantly higher toxicity of targeted formulation in comparison with non-targeted one in low SN38 concentrations (0.15-1.25 μg/mL). In vivo study in mice bearing subcutaneous C26 tumor showed higher therapeutic index for MMP-2 responsive chimeric polymersomal formulation of SN38 in comparison with non-responsive one. On the other hand, AS1411 aptamer-targeted MMP-2 responsive chimeric polymersomal formulation exhibited highest therapeutic index compared to other groups. It could be concluded that the targeted chimeric polymersomes bearing both cleavable peptide sequence between their blocks and targeting ligand on their surface, provide favorable characteristics as an ideal delivery system against cancer.

Specific and Sensitive RP-HPLC Method Development and Validation for the Determination of Aripiprazole: Application in Preformulation Screening of Nanoemulsion

Background:

It has been hypothesized that delivery of aripiprazole through nanoemulsion formulation would better deliver the drug into the central nervous system to treat major depressive conditions in psychological patients. Due course of formulation development, to determine solubility of the drug in different matrices and nanoemulsion is an important step.

Materials & Methods:

Therefore, a simple, rapid and selective reversed phase high performance liquid chromatographic (RP-HPLC) method was developed and validated for the determination of aripiprazole as per International Conference of Harmonization (ICH) guidelines. Satisfactory analysis method was employed for the quantitative determination of aripiprazole during pre-formulation development.

Results and Discussion:

The separation technique was achieved using the mobile phases of methanol-acetonitrile, 80:20 (v/v) delivered at 1.0 mL.min-1 flow rate through HIQ SIL C18 250x4.6 mm (5 μm particle size) column and detected at 218 nm wavelength. The method depicted linear calibration plots within the range of 5 to 50 µg.mL-1 with a determination coefficient (r2) of 0.9991 calculated by least square regression method. The validated method was sensitive with LOD of 10.0 ng.mL-1 and 30.0 ng.mL-1 of LOQ. The intra-day and inter-day precision values were ranged between 0.37-0.89 and 0.63-1.11 respectively, with accuracy ranging from 98.24 to 100.88 and 97.03 to 100.88, respectively. This developed and validated method was found to be sensitive for the determination of aripiprazole for the first time from various oils, surfactants, co-surfactants, and nanoemulsion formulation.

Conclusion:

This RP-HPLC method was successfully implemented for the quantitative determination of aripiprazole at developmental stages of nanoemulsion formulation.

Progress in Polymeric Nano-Medicines for Theranostic Cancer Treatment

Cancer is a life-threatening disease killing millions of people globally. Among various medical treatments, nano-medicines are gaining importance continuously. Many nanocarriers have been developed for treatment, but polymerically-based ones are acquiring importance due to their targeting capabilities, biodegradability, biocompatibility, capacity for drug loading and long blood circulation time. The present article describes progress in polymeric nano-medicines for theranostic cancer treatment, which includes cancer diagnosis and treatment in a single dosage form. The article covers the applications of natural and synthetic polymers in cancer diagnosis and treatment. Efforts were also made to discuss the merits and demerits of such polymers; the status of approved nano-medicines; and future perspectives.

Aptamer-based fluorometric determination of Salmonella Typhimurium using Fe3O4 magnetic separation and CdTe quantum dots

Based on the high sensitivity and stable fluorescence of CdTe quantum dots (QDs) in conjunction with a specific DNA aptamer, the authors describe an aptamer-based fluorescence assay for the determination of Salmonella Typhimurium. The fluorescence detection and quantification of S. Typhimurium is based on a magnetic separation system, a combination of aptamer-coated Fe₃O₄ magnetic particles (Apt-MNPs) and QD-labeled ssDNA2 (complementary strand of the aptamer). Apt-MNPs are employed for the specific capture of S. Typhimurium. CdTe QD-labeled ssDNA2 was used as a signaling probe. Simply, the as-prepared CdTe QD-labeled ssDNA2 was first incubated with the Apt-MNPs to form the aptamer-ssDNA2 duplex. After the addition of S. Typhimurium, they could specifically bind the DNA aptamer, leading to cleavage of the aptamer-ssDNA2 duplex, accompanied by the release of CdTe QD-labeled DNA. Thus, an increased fluorescence signal can be achieved after magnetic removal of the Apt-MNPs. The fluorescence of CdTe QDs (λexc/em = 327/612 nm) increases linearly in the concentration range of 10 to 10¹⁰ cfu•mL^-1, and the limit of detection is determined to be 1 cfu•mL^-1. The detection process can be performed within 2 h and is successfully applied to the analysis of spiked food samples with good recoveries from 90% to 105%.

Targeted delivery of melittin to cancer cells by AS1411 anti-nucleolin aptamer

Melittin, a small water-soluble cationic amphipathic α-helical linear peptide, consisted of 26 amino acids, is the honeybee venom major constituent. Several reports have proved the lytic and apoptotic effects of melittin in several cancerous cell lines. In this study, we aimed to fabricate an AS1411 aptamer-melittin to specifically deliver melittin to nucleolin positive cells (A549). Melittin was covalently attached to antinucleolin aptamer (AS1411) and its toxicity in A549 (nucleolin positive) and L929 (nucleolin negative) was studied using MTT and Annexin V flow cytometry methods. Aptamer-melittin conjugate formation was confirmed by gel electrophoresis. Hemolytic effect of aptamer-melittin conjugate was compared to melittin alone. The aptamer-melittin conjugate showed efficient cell uptake and was more cytotoxic in A549 cells than melittin (p < .001). This complex was less toxic in control cells. Competitive inhibition assay confirmed that aptamer-melittin complex delivery occurred through receptor-ligand interaction on the cell surface. Moreover, aptamer-melittin showed a significantly less hemolytic activity as compared with free melittin. This study showed that melittin could be specifically delivered to A549 cells when it was covalently conjugated to antinucleolin aptamer (AS1411) in vitro. This system can reduce the cytotoxic effects of melittin on cells with no nucleolin receptor overexpression which comprise most of normal cells such as L929 cells.

Meeting the needs of breast cancer: A nucleolin's perspective

A major challenge in the management of breast cancer disease has been the development of metastases. Finding new molecular targets and the design of targeted therapeutic approaches to improve the overall survival and quality of life of these patients is, therefore, of great importance. Nucleolin, which is overexpressed in cancer cells and tumor-associated blood vessels, have been implicated in various processes supporting tumorigenesis and angiogenesis. Additionally, its overexpression has been demonstrated in a variety of human neoplasias as an unfavorable prognostic factor, associated with a high risk of relapse and low overall survival. Hence, nucleolin has emerged as a relevant target for therapeutic intervention in cancer malignancy, including breast cancer. This review focus on the contribution of nucleolin for cancer disease and on the development of therapeutic strategies targeting this protein. In this respect, it also provides a critical analysis about the potential and pitfalls of nanomedicine for cancer therapy.

Fluorescence imaging of hepatocellular carcinoma with a specific probe of COX-2

Hepatocellular carcinoma (HCC) is the major subtype of primary liver cancer. Although the standard treatment method based on surgery has generally extended life, it still causes the second and sixth most prevalent cancer-related death in men and women, respectively. The recurrence of cancer caused by unclear resection margins and any remaining undiscovered metastatic nodules should take a large proportion of responsibility for the poor prognosis after resective surgery. Therefore, a practical and effective method that can be used during hepatectomy to specifically identify HCC is a potentially significant area deserving attention. Tests involving fluorescence have been used in many biological systems. In this study, we use a probe that can combine with cyclooxygenase-2 (COX-2) and subsequently emit fluorescence to identify HCC cells and heteroplastic tumors in a mouse model. The results show that this specific probe can clearly differentiate HCC, with differences that could be observed with the naked eye in human samples. The biotechnology of knocking down COX-2 and its inhibitor were used on human HCC cell line SMMC7721, and the outcomes confirmed the above results. The toxic effect also showed that the probe had no harmful effect on normal liver cells. Taken together, our study demonstrates that a COX-2-specific fluorescence probe may be a new and effective method to identify HCC, especially during surgery.

Derivatizations of Sgc8-c aptamer to prepare metallic radiopharmaceuticals as imaging diagnostic agents: Syntheses, isolations, and physicochemical characterizations

Aptamers, oligonucleotides with the capability to bind to a target through non-covalent bonds with high affinity and specificity, have a great number of advantages as scaffold to prepare molecular imaging agents. In this sense, we have performed post-SELEX modifications of a truncated aptamer, Sgc8-c, which bind to protein tyrosine kinase 7 to obtain a specific molecular targeting probe for in vivo diagnosis and in vivo therapy. Herein, we describe the synthetic efforts to prepare conjugates between Sgc8-c and different metallic ions chelator moieties in short times, high purities, and adequate yields. The selected chelator moieties, derived from 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid, 2-benzyl-1,4,7-triazacyclononane-1,4,7-triacetic acid, and 6-hydrazinonicotinic acid, were covalently attached at the 5'-aptamer position yielding the expected products which were stable in aqueous solution up to 75°C and in typical aptamer storage conditions at least for 30 days.

Smart AS1411-aptamer conjugated pegylated PAMAM dendrimer for the superior delivery of camptothecin to colon adenocarcinoma in vitro and in vivo

In the current study camptothecin-loaded pegylated PAMAM dendrimer were synthesized and were functionalized with AS1411 anti-nucleolin aptamers for site-specific targeting against colorectal cancer cells which over expresses nucleolin receptors. The morphological properties and size dispersity of the prepared nanoparticles were evaluated using transmission electron microscope (TEM) and DLS. The drug-loading content and encapsulation efficiency were obtained 8.1% and 93.67% respectively. The in vitro release of camptothecin from the formulation was provided the sustained release of encapsulated camptothecin during 4days. Comparative in vitro cytotoxicity experiments demonstrated that the targeted camptothecin loaded-pegylated dendrimers had higher antiproliferation activity, towards nucleolin-positive HT29 and C26 colorectal cancer cells than nucleolin-negative CHO cell line. Fluorscence microscopy and flow cytometry also confirmed the enhanced cellular uptake of AS1411 targeted pegylated-dendrimer. In vivo study in C26 tumor-bearing BALB/C mice revealed that the AS1411-functionalized camptothecin loaded pegylated dendrimers improved antitumor activity and survival rate of the encapsulated camptothecin. Conjugation of AS1411 aptamer to the camptothecin loaded-pegylated dendrimer surface provides site-specific delivery of camptothecin, inhibit C26 tumor growth in vivo and significantly decrease systemic toxicity. These results suggested that the new nucleolin-targeted pegylated PAMAM dendrimer as a delivery system for camptothecin have the potential for the treatment of nucleolin-overexpressed colorectal cancer.

Nanoparticle Functionalization and Its Potentials for Molecular Imaging

Functionalization enhances the properties and characteristics of nanoparticles through surface modification, and enables them to play a major role in the field of medicine. In molecular imaging, quality functional images are required with proper differentiation which can be seen with high contrast to obtain viable information. This review article discusses how functionalization enhances molecular imaging and enables multimodal imaging by which images with combination of functions particular to each modality can be obtained. This also explains how nanoparticles interacting at molecular level, when functionalized with molecules can target the cells of interest or substances with high specificity, reducing background signal and allowing simultaneous therapies to be carried out while imaging. Functionalization allows imaging for a prolonged period and enables to track the cells over a period of time. Recent researches and progress in functionalizing the nanoparticles to specifically enhance bioimaging with different modalities and their applications are reviewed in this article.

Highly sensitive detection of leukemia cells based on aptamer and quantum dots

Detection of leukemia at the early stage with high sensitivity is a significant clinical challenge for clinicians. In the present study, we developed a sensitive detector consisting of the product of oligonucleotides hybridized with semiconductor quantum dots (QDs) to generate a stronger fluorescent signal so that leukemic cells can be captured. In the present study, a biotin-modified Sgc8 aptamer was used to identify CCRF-CEM cells, and then biotin-appended QDs were labeled with the aptamer via streptavidin and biotin amplification interactions. We described the complex as QDs-bsb-apt. CEM and Ramos cells were used to assess the specificity and sensitivity of the novel complex. These results revealed that the complex could be more effective in diagnosing leukemia at the early stage. In conclusion, an innovative structure based on aptamer and QDs for leukemia diagnosis was provided. It has the potential to image tumor cells in vitro or in vivo and to realize the early diagnosis of disease. Furthermore, it may be used to provide guidance for clinicians to implement individualized patient therapy.

Ultrasmall inorganic nanoparticles: State-of-the-art and perspectives for biomedical applications

Ultrasmall nanoparticulate materials with core sizes in the 1-3nm range bridge the gap between single molecules and classical, larger-sized nanomaterials, not only in terms of spatial dimension, but also as regards physicochemical and pharmacokinetic properties. Due to these unique properties, ultrasmall nanoparticles appear to be promising materials for nanomedicinal applications. This review overviews the different synthetic methods of inorganic ultrasmall nanoparticles as well as their properties, characterization, surface modification and toxicity. We moreover summarize the current state of knowledge regarding pharmacokinetics, biodistribution and targeting of nanoscale materials. Aside from addressing the issue of biomolecular corona formation and elaborating on the interactions of ultrasmall nanoparticles with individual cells, we discuss the potential diagnostic, therapeutic and theranostic applications of ultrasmall nanoparticles in the emerging field of nanomedicine in the final part of this review.

Applications of aptamers in targeted imaging: state of the art

Aptamers are single-stranded oligonucleotides with high affinity and specificity to the target molecules or cells, thus they can serve as an important category of molecular targeting ligand. Since their discovery, aptamers have been rapidly translated into clinical practice. The strong target affinity/selectivity, cost-effectivity, chemical versatility and safety of aptamers are superior to traditional peptides- or proteins-based ligands which make them unique choices for molecular imaging. Therefore, aptamers are considered to be extremely useful to guide various imaging contrast agents to the target tissues or cells for optical, magnetic resonance, nuclear, computed tomography, ultrasound and multimodality imaging. This review aims to provide an overview of aptamers' advantages as targeting ligands and their application in targeted imaging. Further research in synthesis of new types of aptamers and their conjugation with new categories of contrast agents is required to develop clinically translatable aptamer-based imaging agents which will eventually result in improved patient care.

Development of 3D in vitro technology for medical applications

In the past few years, biomaterials technologies together with significant efforts on developing biology have revolutionized the process of engineered materials. Three dimensional (3D) in vitro technology aims to develop set of tools that are simple, inexpensive, portable and robust that could be commercialized and used in various fields of biomedical sciences such as drug discovery, diagnostic tools, and therapeutic approaches in regenerative medicine. The proliferation of cells in the 3D scaffold needs an oxygen and nutrition supply. 3D scaffold materials should provide such an environment for cells living in close proximity. 3D scaffolds that are able to regenerate or restore tissue and/or organs have begun to revolutionize medicine and biomedical science. Scaffolds have been used to support and promote the regeneration of tissues. Different processing techniques have been developed to design and fabricate three dimensional scaffolds for tissue engineering implants. Throughout the chapters we discuss in this review, we inform the reader about the potential applications of different 3D in vitro systems that can be applied for fabricating a wider range of novel biomaterials for use in tissue engineering.