Surface Molecular Imprinting on Silica-Coated CdTe Quantum Dots for Selective and Sensitive Fluorescence Detection of p-aminophenol in Water

A tailored ratiometric fluorescent sensor based on CdTe and MgF2 quantum dots for trace N-ethylpentylone detection

The development of low-cost and highly sensitive ratiometric fluorescence sensor, CdTe@MIPs/MgF2, for N-Ethylpentylone (NEP) detection in wastewater samples is described. In this system, CdTe@MIPs (λex = 370, λem = 570) are employed as the receptor and response unit for NEP, with MgF2 (λex = 370, λem = 470) as the reference signal to enhance stability. Under optimal conditions, the sensor shows fluorescent quenching response at 570 nm to NEP in linear range of 2-200 nM, with LOD of 0.6 nM. The sensor also demonstrates significant selectivity for NEP over other analogues and interferents, making it ideal for practical applications in wastewater analysis. This approach is potentially more cost-effective and sensitive than conventional mass spectrometry in detecting abused substances in sewage. Additionally, the MgF2 fluorescent nano-material was first-ever developed and investigated, which may be significant in future research.

Molecularly imprinted ratiometric fluorescence sensor for visual detection of 17β-estradiol in milk: A generalized strategy toward imprinted ratiometric fluorescence construction

17β-Estradiol (E2) is the typical endocrine disruptor of steroidal estrogens and is widely used in animal husbandry and dairy processing. In the environment, even lower concentrations of E2 can cause endocrine dysfunction in organisms. Herein, we have developed a novel molecularly imprinted ratiometric fluorescent sensor based on SiO2-coated CdTe quantum dots (CdTe@SiO2) and 7-hydroxycoumarin with a post-imprint mixing strategy. The sensor selectively detected E2 in aqueous environments due to its two fluorescent signals with a self-correction function. The sensor has been successfully used for spiking a wide range of real water and milk samples. The results showed that the sensor exhibited good linearity over the concentration range 0.011-50 μg/L, obtaining satisfactory recoveries of 92.4-110.6% with precisions (RSD) < 2.5%. Moreover, this sensor obtained an ultra-low detection limit of 3.3 ng/L and a higher imprinting factor of 13.66. By using estriol (E3), as a supporting model, it was confirmed that a simple and economical ratiometric fluorescent construction strategy was provided for other hydrophobic substances.

Core-shell "loading-type" nanomaterials enabling glucometer readout for portable and sensitive detection of p-aminophenol in real samples

A one-target-many-trigger signal model sensing strategy is proposed for quickly, sensitive and on-site detection of the environmental pollutant p-aminophenol (PAP) by use of a commercial personal glucose meter (PGM) for signal readout with the core-shell "loading-type" nanomaterial MSNs@MnO2 as amplifiable nanoprobes. In this design, the mesoporous silica nanoparticles (MSNs) nanocontainer with entrapped signal molecule glucose is coated with redoxable manganese dioxide (MnO2) nanosheets to form the amplifiable nanoprobes (Glu-MSNs@MnO2). When encountered with PAP, the redox reaction between the MnO2 and PAP can induce the degradation of the outer layer of MSNs@MnO2, liberating multiple copies of the loaded glucose to light up the PGM signal. Owing to the high loading capability of nanocarriers, a "one-to-many" relationship exists between the target and the signal molecule glucose, which can generate adequate signal outputs to achieve the requirement of on-site determination of environmental pollutants. Taking advantage of this amplification mode, the developed PAP assay owns a dynamic linear range of 10.0-400 μM with a detection limit of 2.78 μM and provides good practical application performance with above 96.7 ± 4.83% recovery in environmental water and soil samples. Therefore, the PGM-based amplifiable sensor for PAP proposed can accommodate these requirements of environment monitoring and has promising potential for evaluating pollutants in real environmental samples.

A highly sensitive method for the detection of p-Aminophenol based on Cu-Au nanoparticles and KIO3

BACKGROUND

As a common industrial raw material and chemical intermediate, p-Aminophenol (pAP) is recognized as a serious pollutant that poses harm to both the environment and human health. The traditional detection methods for pAP have the advantages of good selectivity and high sensitivity, but their complex operation and time-consuming defects limit their application in on-site detection. Therefore, it is necessary to develop a simple, low-cost, rapid and high-sensitivity method for the detection of pAP.

RESULTS

Noble metal nanoparticles have been widely used in colorimetric sensing because of their simplicity and practicality. Herein, we presented a simple, excellent sensitive and selective colorimetric method for high-performance detection of pAP based on Cu-Au nanoparticles (Cu-Au NPs) and KIO3. In the presence of pAP, KIO3 was reduced to I2, which subsequently chemically adsorbed onto Cu-Au NPs surface and induced the dispersion and reorganization of Cu-Au NPs, along with prominent color change of the dispersion from gray-blue to pink and the transformation of Cu-Au NPs from chain-like aggregates to individual dispersed, irregular, subspherical nanoparticles. The mechanism was verified by TEM, DLS, Zeta potential, UV-vis and XPS. Meanwhile, Cu-Au NPs probe can rapidly detect pAP within 25 min, the limit of detection of pAP probe is 5 μM by the naked eyes and 0.03 μM by UV-vis absorption spectrum.

SIGNIFICANCE AND NOVELTY

This is the first colorimetric assay for pAP based on Cu-Au NPs probe. The satisfactory linearity (R2 = 0.9984) indicates that the colorimetric probe based on Cu-Au NPs and KIO3 can be utilized for quantitative detection of pAP. The detection results of pAP in real environmental water samples, urine samples and paracetamol tables demonstrate the practicability of pAP colorimetric probe.

MnO2-DNA nanomaterials toward the dual signal detection of P-aminophenol micropollutants

P-Aminophenol (PAP), a potentially toxic and mutagenic compound, is widely distributed in water and soil and has serious side effects on human health. This study presents a convenient, sensitive, and effective dual-signal assay for the detection of PAP in the environment. Two-dimensional manganese dioxide (MnO₂) nanosheets were used as the carrier and quencher for fluorophore-labelled DNA to form a dual-signal nanoprobe, MnO₂-DNA. Based on a specific redox reaction between the MnO₂ nanosheets and target PAP, the corresponding absorption intensity of the product and the fluorescence intensity were both "turn-on" and also exhibited excellent correlation with the concentration of PAP. This strategy not only remarkably simplifies the detection process but also improves the reliability of results due to the dual-signal response, which has promising applications in environmental, clinical, and industrial research fields.

Molecularly Imprinted Polymer-Coated Inorganic Nanoparticles: Fabrication and Biomedical Applications

Molecularly imprinted polymers (MIPs) continue to gain increasing attention as functional materials due to their unique characteristics such as higher stability, simple preparation, robustness, better binding capacity, and low cost. In particular, MIP-coated inorganic nanoparticles have emerged as a promising platform for various biomedical applications ranging from drug delivery to bioimaging. The integration of MIPs with inorganic nanomaterials such as silica (SiO₂), iron oxide (Fe₃O₄), gold (Au), silver (Ag), and quantum dots (QDs) combines several attributes from both components to yield highly multifunctional materials. These materials with a multicomponent hierarchical structure composed of an inorganic core and an imprinted polymer shell exhibit enhanced properties and new functionalities. This review aims to provide a general overview of key recent advances in the fabrication of MIPs-coated inorganic nanoparticles and highlight their biomedical applications, including drug delivery, biosensor, bioimaging, and bioseparation.

Screen-printed graphite electrode modified with Co3O4nanoparticles and 2D graphitic carbon nitride as an effective electrochemical sensor for 4-aminophenol detection

We fabricated a new electrochemical 4-aminophenol sensor based on a nanocomposite of Co₃O₄nanoparticles and graphite carbon nitride (Co₃O₄@g-C₃N₄), used for the modification of a screen-printed electrode (Co₃O₄@g-C₃N₄/SPE). The synthesized nanocomposite was characterized using field-emission scanning electron microscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and Fourier transform-infrared (FT-IR) techniques. The electro-oxidation of 4-aminophenol in phosphate buffer solution (pH = 7.0) was investigated via cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The peak current of oxidation in the optimized conditions had a linear relationship with various 4-aminophenol contents (0.05-780.0μM) with a correlation coefficient of 0.9996 and the limit of detection (S/N = 3) of 1.5 × 10^-8M. The developed method was successful to determine 4-aminophenol in real specimens, with acceptable outcomes.

Iodine/iodide-doped polymeric nanospheres for simultaneous voltammetric detection of p-aminophenol, phenol, and p-nitrophenol

A sensor was developed for the first time based on polydopamine nanospheres doped with I₂, I^-, and IO₃^- species (PDA-Iodine), to determine the concentration of p-aminophenol (p-AP), phenol (Ph), and p-nitrophenol (p-NP) simultaneously. These polymeric nanospheres were successfully characterized using a variety of techniques including field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared, Raman spectroscopy, and X-ray diffraction analysis. A carbon paste electrode was modified with the PDA-Iodine (CPE/PDA-Iodine). Because of the electrocatalytic activity of DA/DQ, I₂ and I^- species (in the structure of PDA-Iodine), CPE/PDA-Iodine shows enhancement in the electrooxidation peak currents as well as slight negative shift in peak potentials of p-AP, Ph, and p-NP compared with a bare carbon paste electrode. Under optimal experimental conditions, the linear calibration plots are linear in the ranges 0.5-120 μM for p-AP, 0.7-120 μM for Ph, and 1.0-100 μM for p-NP with limits of detection of 30, 40, and 80 nM for p-AP, Ph, and p-NP, respectively (S/N = 3). To prove the performance of the method, the repeatability of the signals of CPE/PDA-Iodine was evaluated and the RSD values obtained were 2.9%, 3.2%, and 3.1% for p-AP (45 µM), Ph (40 µM), and p-NP (40 µM), respectively. The CPE/PDA-Iodine is a promising new sensor for sensing p-AP, Ph, and p-NP simultaneously in tap and river water sample and the values of recoveries for spiked samples were in the range 94.0-104.4%.

Fast determination of paracetamol and its hydrolytic degradation product p-aminophenol by capillary and microchip electrophoresis with contactless conductivity detection

Paracetamol (PAC) is one of the most extensively used analgesics and antipyretic drugs to treat mild and moderate pain. P-aminophenol (PAP), the main hydrolytic degradation product of PAC, can be found in environmental water. Recently, capillary electrophoresis (CE) has been developed for the detection of a wide variety of chemical substances. The purpose of this study is to develop a simple and fast method for the detection and separation of PAC and its main hydrolysis product PAP, using CE and microchip electrophoresis (ME) with capacitively coupled contactless conductivity detection (C⁴ D). The determination of these compounds using ME with C⁴ D is being reported for the first time. The separation was run for all analytes using a background electrolyte (BGE) (20 Mm β-alanine, pH 11) containing 14% (v/v) methanol. The RSDs obtained for migration time were less than 0.05%, and RSDs obtained for peak area were less than 3%. The detection limits (S/N = 3) that were achieved ranged from 0.3 to 0.6 mg/L without sample preconcentration. The presented method showed rapid analysis time (less than 1 min), high efficiency and precision, low cost, and a significant decrease in the consumption of reagents. The microchip system has proved to be an excellent analytical technique for fast and reliable environmental applications. This article is protected by copyright. All rights reserved.

Molecularly Imprinted Polymer-Quantum Dot Materials in Optical Sensors: An Overview of Their Synthesis and Applications

In the last decades analytical methods have focused on the determination of target analytes at very low concentration levels. This has been accomplished through the use of traditional analytical methods that usually require high reagent consumption, expensive equipment and long pretreatment steps. Thus, there is a demand for simple, rapid, highly selective and user-friendly detection procedures. Quantum dots (QDs) are semiconductor fluorescent nanomaterials with unique optoelectronic properties that have shown great potential for the development of fluorescence probes. Besides, the combination of QDs with molecularly imprinted polymer (MIPs), synthetic materials with selective recognition, have been proposed as useful materials in the development of optical sensors. The resulting MIP-QDs optical sensors integrate the advantages of both techniques: the high sensitivity of QDs-based fluorescence sensors and the high selectivity of MIPs. This review gives a brief overview of the strategies for the synthesis of MIPs-QDs based optical sensors, highlighting the modifications in the synthesis procedure that improve the sensor performance. Finally, a revision of recent applications in sensing and bioimaging is presented.

Nanohybrid magnetic composite optosensing probes for the enrichment and ultra-trace detection of mafenide and sulfisoxazole

Nanohybrid magnetic optosensing probes were designed and fabricated to enrich and detect ultra-trace levels of mafenide and sulfisoxazole simultaneously. The probes combined the high affinity of MIL-101 and the sensitivity of graphene quantum dots (GQDs) and cadmium telluride quantum dots (CdTe QDs) with the selectivity and rapid separation provided by a magnetic molecularly imprinted polymer (MMIP). Since the MIL101-MMIP-GQD and MIL101-MMIP-CdTe QD probes produced high fluorescence emission intensities at 435 and 572 nm, respectively, mafenide and sulfisoxazole could be simultaneously detected. Quantitative analysis was based on fluorescence quenching produced by binding between target molecules and imprinted recognition cavities. In the optimal experimental condition, emission intensity was quenched linearly with increasing analyte concentration from 0.10 to 25.0 μg L^-1. Limit of detection was 0.10 μg L^-1 for mafenide and sulfisoxazole. The developed optosensor was applied to detect ultra-trace amounts of mafenide and sulfisoxazole in bovine milk. Recoveries of mafenide and sulfisoxazole in spiked bovine milk ranged from 80.4 to 97.9% with RSDs <5% and the analysis results agreed well with HPLC analysis. The proposed probes provided excellent sensitivity, selectivity, ease and convenience of use.

A fluorescent artificial receptor with specific imprinted cavities to selectively detect colistin

A novel and facile fluorescent artificial receptor on the basis of the molecularly imprinted polymer-coated graphene quantum dots was engineered successfully to detect colistin. The colistin imprinted graphene quantum dots (CMIP-GQDs) was synthesized by vinyl-based radical polymerization between functional monomers and crosslinker at around the template molecule on the surface of graphene quantum dots. The size of bare, CNIP-GQDs, and CMIP-GQDs was about 4.8 ± 0.6 nm, 18.4 ± 1.7 nm, and 19.7 ± 1.3 nm, respectively. The CMIP-GQDs, which showed the strong fluorescence emission at 440 nm with the excitation wavelength fixed at 380 nm, had excellent selectivity and specificity to rapidly recognize and detect colistin. The linear range of fluorescence quenching of this fluorescent artificial receptor for detection colistin was 0.016-2.0 μg mL^-1 with a correlation coefficient (R²) of 0.99919, and the detection limit was 7.3 ng mL^-1 in human serum samples. The designed receptor was successfully applied to detect colistin in human serum samples and it achieved excellent recoveries shifted from 93.8 to 105%. Graphical abstract.

A sensitive sensor based on MOFs derived nanoporous carbons for electrochemical detection of 4-aminophenol

A novel electrochemical sensor based on zinc oxide/nitrogen doped porous carbons (ZnO/NPC) modified electrode has been constructed for detecting 4-aminophenol (4-AP). The ZnO/NPC material was synthesized by one-step carbonization of MOF-5-NH₂. The modified glassy carbon electrode (ZnO/NPC/GCE) holds excellent electrocatalytic activity toward 4-AP, with a sensitivity of about 31.02 μA/μM/cm². Under optimal conditions, its oxidation peak current increases linearly with the increasing concentration of 4-AP (from 5 to 120 μmol/L), and the detection limits is 0.014 μmol/L (S/N = 3). Furthermore, favorable selectivity, superior reproducibility and outstanding stability have been achieved. The ZnO/NPC/GCE has been applied in detecting 4-AP in industrial waste water and achieved positive results with the recovery of 4-AP ranging from 94.02% to 107.7%, which confirms that this sensor is a reliable platform for the detection of 4-AP in waste water.

A boron nitride electrode modified with a nanocomposite prepared from an ionic liquid and tungsten disulfide for voltammetric sensing of 4-aminophenol

Boron nitride (BN) was used as a support and covered with an ionic liquid (IL) and tungsten disulfide (WS₂) nanoparticles to obtain an electrode for the determination of 4-aminophenol (4-AP). BN was prepared using a "solvent cutting" method, and the BN-IL-WS₂ nanocomposite was obtained by an ultrasonic method. BN and its hybrids were characterized by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. When the BN-IL-WS₂ composites were coated on the surface of the electrode, the response to 4-AP was strongly amplified due to the strong synergetic effect between the three materials. The voltammetric response of the modified sensor (with a maximum at 0.29 V vs. Ag/AgCl) in solutions with a pH of 6 is linear in the 0.01-50 μΜ 4-AP concentration range, and the limit of detection is 3 nM. A modified glassy carbon electrode was applied for the determination of 4-AP in seawater and dispersions containing paracetamol tablets. The results were consistent with those obtained by HPLC. Graphical abstract Schematic representation of the voltammetric determination process of 4-aminophenol (4-AP). The electrochemical sensor based on the glassy carbon electrode modified with boron nitride (BN), ionic liquid (IL) and tungsten disulfide (WS₂) nanomaterials. They, exhibit an excellent performance compared with other electrodes.

A nanocomposite optosensor containing carboxylic functionalized multiwall carbon nanotubes and quantum dots incorporated into a molecularly imprinted polymer for highly selective and sensitive detection of ciprofloxacin

A nanocomposite optosensor consisting of carboxylic acid functionalized multiwall carbon nanotubes and CdTe quantum dots embedded inside a molecularly imprinted polymer (COOH@MWCNT-MIP-QDs) was developed for trace ciprofloxacin detection. The COOH@MWCNT-MIP-QDs were synthesized through a facile sol-gel process using ciprofloxacin as a template molecule, 3-aminopropylethoxysilane as a functional monomer and tetraethoxysilane as a cross-linker at a molar ratio of 1:8:20. The synthesized nanocomposite optosensor had high sensitivity, excellent specificity and high binding affinity to ciprofloxacin. Under optimal conditions, the fluorescence intensity of the optosensor decreased in a linear fashion with the concentration of ciprofloxacin and two linear dynamic ranges were obtained, 0.10-1.0 μg L^-1 and 1.0-100.0 μg L^-1 with a very low limit of detection of 0.066 μg L^-1. The imprinting factors of the two linear range were 17.67 and 4.28, respectively. The developed nanocomposite fluorescence probe was applied towards the determination of ciprofloxacin levels in chicken muscle and milk samples with satisfactory recoveries being obtained in the range of 82.6 to 98.4%. The results were also in good agreement with a HPLC method which indicates that the optosensor can be used as a sensitive, selective and rapid method to detect ciprofloxacin in chicken and milk samples.