A New Spiropyran-Based Sensor for Colorimetric and Fluorescent Detection of Divalent Cu2+ and Hg2+ Ions and Trivalent Ce3+, Cr3+ and Al3+ Ions

Pyridine-2,6-Dicarboxylic Acid As a Facile and Highly Selective "Turn-Off" Fluorimetric Chemosensor for Detection of Cu (II) Ions in Aqueous Media

Copper metal is third most abundant trace element in human body. Determination of Cu (II) ions is a burning topic in field of environment protection and food safety because of its significant impact on ecosystem. In this study, 2,6-pyridine dicarboxylic acid (PDA) has been explored as "turn-off" florescent probe for florescent detection of Cu (II) ions. This sensor showed highly selective complexing ability towards Cu (II) ions. Addition of aqueous solution of Cu (II) ions remarkably quenched the fluorescence intensity of PDA while, on contrary, there was no any prominent fluorescence quenching interference on addition of various metal ions. The binding mode of PDA and Cu (II) ions was determined as stoichiometry of 1:1 and it was further confirmed by single crystal XRD analysis. Mechanisms of static and dynamic quenching were confirmed by stern-volmer plot. Limit of detection (LOD) and limit of quantification (LOQ) for Cu (II) ions was calculated as 3.6 µM and 1.23 µM respectively, which is far below the acceptable value (31.5µM) according to the World Health Organization. The use of the sensor for detection of Cu (II) ions in real samples in aqueous media was also performed.

Valorised polypropylene waste based reversible sensor for copper ion detection in blood and water

Heavy metals and plastic pollutants are the two most disastrous challenges to the environment requiring immediate actions. In this work, a techno-commercially feasible approach to address both challenges is presented, where a waste polypropylene (PP) based reversible sensor is produced to selectively detect copper ions (Cu2+) in blood and water from different sources. The waste PP-based sensor was fabricated in the form of an emulsion-templated porous scaffold decorated with benzothiazolinium spiropyran (BTS), which produced a reddish colour upon exposure to Cu2+. The presence of Cu2+ was checked by naked eye, UV-Vis spectroscopy, and DC (Direct Current) probe station by measuring the current where the sensor's performance remained unaffected while analysing blood, water from different sources, and acidic or basic environment. The sensor exhibited 1.3 ppm as the limit of detection value in agreement with the WHO recommendations. The reversible nature of the sensor was determined by cyclic exposure of the sensor towards visible light turning it from coloured to colourless within 5 min and regenerated the sensor for the subsequent analysis. The reversibility of the sensor through exchange between Cu2+- Cu+ was confirmed by XPS analysis. A resettable and multi-readout INHIBIT logic gate was proposed for the sensor using Cu2+ and visible light as the inputs and colour change, reflectance band and current as the output. The cost-effective sensor enabled rapid detection of the presence of Cu2+ in both water and complex biological samples such as blood. While the approach developed in this study provides a unique opportunity to address the environmental burden of plastic waste management, it also allows for the possible valorization of plastics for use in enormous value-added applications.

Spiropyran-Merocyanine Based Photochromic Fluorescent Probes: Design, Synthesis, and Applications

Due to ever-increasing insights into their fundamental properties and photochromic behaviors, spiropyran derivatives are still a target of interest for researchers. The interswitching ability of this photochrome between the spiropyran (SP) and merocyanine (MC) isoforms under external stimuli (light, cations, anions, pH etc.) with different spectral properties as well as the protonation-deprotonation of its MC form allows researchers to use it suitably in sensing purposes by developing different colorimetric and fluorometric probes. Selective and sensitive recognition can be achieved by little modification of its SP moiety and functional groups. In this review, we emphasize the recent advancements (from 2019 to 2022) of spiropyran-merocyanine based fluorogenic and chromogenic probes for selective detection of various metal ions, anions, neutral analytes, and pH. We precisely explain their design strategies, sensing mechanisms, and biological and environmental applications. This review may accelerate the improvements in designing more advanced probes with innovative applications in the near future.

Highly Sensitive and Selective Spiropyran-Based Sensor for Copper(II) Quantification

The metal-binding capabilities of the spiropyran family of molecular switches have been explored for several purposes from sensing to optical circuits. Metal-selective sensing has been of great interest for applications ranging from environmental assays to industrial quality control, but sensitive metal detection for field-based assays has been elusive. In this work, we demonstrate colorimetric copper sensing at low micromolar levels. Dimethylamine-functionalized spiropyran (SP1) was synthesized and its metal-sensing properties were investigated using UV-vis spectrophotometry. The formation of a metal complex between SP1 and Cu²⁺ was associated with a color change that can be observed by the naked eye as low as ≈6 μM and the limit of detection was found to be 0.11 μM via UV-vis spectrometry. Colorimetric data showed linearity of response in a physiologically relevant range (0-20 μM Cu²⁺) with high selectivity for Cu²⁺ ions over biologically and environmentally relevant metals such as Na⁺, K⁺, Mn²⁺, Ca²⁺, Zn²⁺, Co²⁺, Mg²⁺, Ni²⁺, Fe³⁺, Cd²⁺, and Pb²⁺. Since the color change accompanying SP1-Cu²⁺ complex formation could be detected at low micromolar concentrations, SP1 could be viable for field testing of trace Cu²⁺ ions.

A New Molecular Probe for Colorimetric and Fluorometric Detection and Removal of Hg2+ and its Application as Agarose Film-Based Sensor for On-Site Monitoring

A new molecule incorporating two units of 7-nitro-benzoxadiazole (NBD), bridged by m-xylylenediamine, was synthesized and characterized on the basis of analytical and spectroscopic techniques. The metal ion sensing property of this molecule was studied spectroscopically with a large number of metal ions. This study revealed that it can perform as a dual-channel probe for colorimetric as well as fluorometric detection of Hg²⁺. In presence of Hg²⁺, a substantial change in UV-Vis spectrum with the appearance of a new band at 545 nm and a distinct colour change from yellow to red was observed. In the fluorescence spectrum, the intensity of the emission band was substantially quenched only upon addition of Hg²⁺. No significant interference from any other metal ion used in this study was noted, the limit of detection (LOD) for Hg²⁺ was found to be 60 and 10 nM for colorimetric and fluorometric detection method, respectively. This new chemosensor was used for removal of Hg²⁺ from aqueous solution with 92% efficiency. For on-site monitoring and field application, this molecule was immobilized into the agarose based hydrogel film, which was used successfully for detection of Hg²⁺ in water. The study on reversible behaviour of this chemosensor revealed that it can be recycled in solution as well as in solid phase by treatment with Na₂S.

Synthesis of a 5-Carboxy Indole-Based Spiropyran Fluorophore: Thermal, Electrochemical, Photophysical and Bovine Serum Albumin Interaction Investigations

In this study, we synthesized a spiropyran containing an electron-withdrawing carboxyl group in good yield by condensation of an aromatic aldehyde with enamine indole. The spiropyran absorbed at the ultraviolet region with a maximum at approximately 300 nm, demonstrating slight solvatochromism (~3 nm). A fluorescent emission around 360 nm was observed with a higher solvatochromic effect (~12 nm), indicating higher electronic delocalization in the excited state. The photoreversibility of the open and closed forms of spiropyran excited at 300 nm and 365 nm was not observed, indicating that the absence of the nitro group plays a fundamental role in this equilibrium. Theoretical calculations were also applied for better understanding the photophysics of these compounds. Electrochemical characterization revealed the values of the HOMO and LUMO energy levels at −1.89 eV (electron affinity) and −5.61 eV (ionization potential), respectively. Thermogravimetric analysis showed excellent thermal stability of the spiropyran, with 5% weight loss at approximately 250 °C. Finally, the photophysical features were used to explore the interaction of spiropyran with bovine serum albumin in a phosphate buffer solution, where a significant suppression mechanism was observed.

Coumarin Thiourea-Based Fluorescent Turn-on Hg2+ Probe That Can Be Utilized in a Broad pH Range 1-11

A novel coumarin-thiourea conjugate was synthesized facilely. It served as a fluorescent turn-on chemosensor for selective detection of Hg²⁺ ion over other common competitive metal ions including Li⁺, Na⁺, K⁺, Ag⁺, Cu²⁺, Fe²⁺, Zn²⁺, Co²⁺, Ni²⁺, Mn²⁺, Sr²⁺, Ca²⁺, Mg²⁺, Al³⁺, Cr³⁺ and Fe³⁺ ions based on the Hg²⁺-promoted desulfurization and cyclization reactions. Addition of Hg²⁺ ion to the sensor solution in 2:8 EtOH/H₂O induced a hypsochromic shift of the UV-Vis absorption band from 360 nm to 340 nm accompanying distinct enhancement in the absorption intensity while addition of other metal ions failed to bring about substantial change in the absorption spectra. Addition of Hg²⁺ to the sensor solution also caused marked increase in the fluorescence emission intensity and most common competitive metal ions did not interfere with the selective sensing of Hg²⁺ ion by the sensor. The detection limit of Hg²⁺ ion by the probe was calculated to be 1.46 × 10^-7 M and the probe could be utilized for selective detection of Hg²⁺ ion by fluorescence turn-on mode over a broad pH range of 1-11.

Nanostructured and Photochromic Material for Environmental Detection of Metal Ions

Compared to conventional spectroscopy or chromatography analysis, chemical sensing based on colorimetric changes offers an alternative to monitor potential metal hazards in aqueous environment through rapid and low-cost colorimetric changes which can be easily interpreted. In this work poly(ethylene glycol) (PEG 2000) was modified with a carboxylic acid spiropyran (SPCOOH) derivate by Steglich esterification (PEGSP2). PEGSP2 was incorporated into a poly(ε-caprolactone) (PCL) polymer matrix by electrospinning technique to produce nanofibers with photochromic properties. Spectroscopic analysis, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC) were used to characterize PEGSP2. Drop shape analysis (DSA) and scanning electronic microscopy (SEM) were used to characterize the electrospun (ES) nanofibers morphology. Several metal ions solutions relevant to environmental hazards were prepared to be spotted on the surface of ES nanofibers for photochromatic sensing. Among them, Mg²⁺, Ca²⁺, Zn²⁺, Cd²⁺, La³⁺, and Er³⁺ demonstrated orange fluorescence when exposed to UV light. ES nanofibers also presented higher wettability when compared to a pure PCL polymer matrix, which is critical for sensitivity. Eighteen metals ions could be detected on the electrospun material. Additionally, among all metal ions Fe³⁺ was the most sensitive one in solution, in a µmol L⁻¹ range.