Fluorescein Based Fluorescence Sensors for the Selective Sensing of Various Analytes

Mercury (Hg2+) Sensing Using Coumarin-Derived Fluorescent Chemo-Sensors: An Intuitive Development from 2015 to 2023

Mercury is known as a highly toxic metal that is poisonous even if present in a trace amount. Generally, it enters in the food chain (especially fish) and water resources via different pathways and leads to harmful effects. Owing to the detrimental nature of the metal, traditionally several methods were employed by researchers for regular monitoring of the mercury metal ions. However, these methods are associated with many limitations like high cost of technical expertise, and intricacy of the detection procedure. So, using these methods to detect mercury ions in real time is challenging. Therefore, in recent years fluorescent-based analytical tools emerged rapidly. Among the various fluorescent organic scaffolds, coumarin has been scorching, owing to quick response, light stability, high sensitivity, good selectivity, excellent fluorescence intensity, and fluorescence quantum yield. This review provides a deep dive into the coumarin-derived chemo-sensors development throughout 2015-2023. We anticipate that the review will assist to broad scientific community as a reference document to design more interesting sensors.

Evidence for a transfer-to-trap mechanism of fluorophore concentration quenching in lipid bilayers

It is important to understand the behaviors of fluorescent molecules because, firstly, they are often utilized as probes in biophysical experiments and, secondly, they are crucial cofactors in biological processes such as photosynthesis. A phenomenon called "fluorescence quenching" occurs when fluorophores are present at high concentrations, but the mechanisms for quenching are debated. Here, we used a technique called "in-membrane electrophoresis" to generate concentration gradients of fluorophores within a supported lipid bilayer, across which quenching was expected to occur. Fluorescence lifetime imaging microscopy (FLIM) provides images where the fluorescence intensity in each pixel is correlated to fluorescence lifetime: the intensity provides information about the location and concentration of fluorophores and the lifetime reveals the occurrence of energy-dissipative processes. FLIM was used to compare the quenching behavior of three commonly used fluorophores: Texas Red (TR), nitrobenzoaxadiazole (NBD), and 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY). FLIM images provided evidence of quenching in regions where the fluorophores accumulated, but the degree of quenching varied between the different fluorophores. The relationship between quenching and concentration was quantified and the "critical radius for trap formation," representing the relative quenching strength, was calculated as 2.70, 2.02, and 1.14 nm, for BODIPY, TR, and NBD, respectively. The experimental data support the theory that quenching takes place via a "transfer-to-trap" mechanism which proposes, firstly, that excitation energy is transferred between fluorophores and may reach a "trap site," resulting in immediate energy dissipation, and, secondly, that trap sites are formed in a concentration-dependent manner. Some previous work suggested that quenching occurs only when fluorophores aggregate, or form long-lived dimers, but our data and this theory argue that traps may be "statistical pairs" of fluorophores that exist only transiently. Our findings should inspire future work to assess whether these traps can be charge-transfer states, excited-state dimers, or something else.

Pathway-dependent supramolecular polymerization by planarity breaking

In controlled supramolecular polymerization, planar π-conjugated scaffolds are commonly used to predictably regulate stacking interactions, with various assembly pathways arising from competing interactions involving side groups. However, the extent to which the nature of the chromophore itself (planar vs. non-planar) affects pathway complexity requires clarification. To address this question, we herein designed a new BOPHY dye 2, where two oppositely oriented BF2 groups induce a disruption of planarity, and compared its supramolecular polymerization in non-polar media with that of a previously reported planar BODIPY 1 bearing identical substituents. The slightly non-planar structure of the BOPHY dye 2, as evident in previously reported X-ray structures, together with the additional out-of-plane BF2 group, allow for more diverse stacking possibilities leading to two fiber-like assemblies (kinetic 2A and thermodynamic 2B), in contrast to the single assembly previously observed for BODIPY 1. The impact of the less rigid, preorganized BOPHY core compared to the planar BODIPY counterpart is also reflected in the stronger tendency of the former to form anisotropic assemblies as a result of more favorable hydrogen bonding arrays. The structural versatility of the BOPHY core ultimately enables two stable packing arrangements: a kinetically controlled antiparallel face-to-face stacking (2A), and a thermodynamically controlled parallel slipped packing (2B) stabilized by (BF2) F⋯H (meso) interactions. Our findings underscore the significance of planarity breaking and out-of-plane substituents on chromophores as design elements in controlled supramolecular polymerization.

Fluorescent chemosensors facilitate the visualization of plant health and their living environment in sustainable agriculture

Globally, 91% of plant production encounters diverse environmental stresses that adversely affect their growth, leading to severe yield losses of 50-60%. In this case, monitoring the connection between the environment and plant health can balance population demands with environmental protection and resource distribution. Fluorescent chemosensors have shown great progress in monitoring the health and environment of plants due to their high sensitivity and biocompatibility. However, to date, no comprehensive analysis and systematic summary of fluorescent chemosensors used in monitoring the correlation between plant health and their environment have been reported. Thus, herein, we summarize the current fluorescent chemosensors ranging from their design strategies to applications in monitoring plant-environment interaction processes. First, we highlight the types of fluorescent chemosensors with design strategies to resolve the bottlenecks encountered in monitoring the health and living environment of plants. In addition, the applications of fluorescent small-molecule, nano and supramolecular chemosensors in the visualization of the health and living environment of plants are discussed. Finally, the major challenges and perspectives in this field are presented. This work will provide guidance for the design of efficient fluorescent chemosensors to monitor plant health, and then promote sustainable agricultural development.

A new Eosin Y-based 'turnon' fluorescent sensor for ratiometric sensing of toxic mercury ion (Hg2+) offering unaided eye detection and its antibacterial activity

A unique fluorescent molecule (ND-S) was obtained from Eosin Y in two simple yet high yielding steps (1). ND-S has special metal ion sensing ability, such that it can selectively detect toxic Hg2+ present in very low concentration in aqueous solutions in the presence of other competing metal ions. The host-guest complexation is ratiometric and is associated with significant increase in fluorescence during the process. Isothermal titration calorimetry (ITC) experiments provided thermodynamic parameters related to interaction between ND-S and Hg2+. Using inductively coupled plasma mass spectrometry (ICP-MS), the Hg2+(aq) removal efficiency of ND-S was estimated to be 99.88%. Appreciable limit of detection (LOD = 7.4 nM) was observed. Other competing ions did not interfere with the sensing of Hg2+ by ND-S. The effects of external stimuli (temperature and pH) were studied. Besides, the complex (ND-M), formed by 1:1 coordination of ND-S and Hg2+ was found to be effective against the survival of Gram-positive bacteria (S. aureus and B. subtilis) with a high selectivity index. Moreover, bacterial cell death mechanism was studied systematically. Overall, we have shown the transformation of a toxic species (Hg2+), extracted from polluted water by a biocompatible sensor (ND-S), into an effective and potent antibacterial agent (ND-M).

Synthetic, biological and optoelectronic properties of phenoxazine and its derivatives: a state of the art review

Phenoxazines have sparked a lot of interest owing to their numerous applications in material science, organic light-emitting diodes, photoredox catalyst, dye-sensitized solar cells and chemotherapy. Among other things, they have antioxidant, antidiabetic, antimalarial, anti-alzheimer, antiviral, anti-inflammatory and antibiotic properties. Actinomycin D, which contains a phenoxazine moiety, functions both as an antibiotic and anticancer agent. Several research groups have worked on various structural modifications over the years in order to develop new phenoxazines with improved properties. Both phenothiazines and phenoxazines have gained prominence in medicine as pharmacological lead structures from their traditional uses as dyes and pigments. Organoelectronics and material sciences have recently found these compounds and their derivatives to be quite useful. Due to this, organic synthesis has been used in an unprecedented amount of exploratory alteration of the parent structures in an effort to create novel derivatives with enhanced biological and material capabilities. As a result, it is critical to conduct more frequent reviews of the work done in this area. Various stages of the synthetic transformation of phenoxazine scaffolds have been depicted in this article. This article aims to provide a state of the art review for the better understanding of the phenoxazine derivatives highlighting the progress and prospects of the same in medicinal and material applications.

Theoretical Study on Spectrum and Luminescence Mechanism of Cy5.5 and Cy7.5 Dye Based on Density Functional Theory (DFT)

Cy5.5 and 7.5 are the most commonly used NIR 2-region fluoresceins, which have good luminescence properties and important biomedical tracer applications. In this paper, their molecular non-covalent interactions, UV-Vis absorption spectra, main bond lengths, electrostatic potential distributions, frontier molecular orbitals (HOMO and LUMO) and energy gaps were calculated by density functional theory (DFT). We found that the differences in the luminescence properties and energy gaps of Cy5.5 and Cy7.5 molecules may be caused by the length of the conjugated chains between the two aromatic rings in the molecule. By calculating the relevant molecular characteristics, this paper can provide ideas and theoretical basis for the relevant modification and application, as well as the development of new fluorescent dyes.

Hydrothermal Fabrication of Efficient Binary Pd/Ag2S Heterojunction Composites: Synthesis, Characterization, and Fluorometric Selective Sensing of Organophosphate Pesticides

Although many plasmonic nanosensors have been established for the detection of analytes, few of them are feasible for analyzing natural samples with very complex matrices because of insufficient method selectivity. To address this challenge, we propose an epitaxial and lattice-mismatch approach to the synthesis of a unique Pd/Ag2S nanostructure, which consists of a Pd segment with excellent plasmonic characteristics, and a highly stable Ag2S portion with minimum solubility product (Ksp(Ag2S) = 6.3 × 10- 50). Hence, Ag2S nanoparticles (NPs) and optimized (10.05 mmol/L) Pd/Ag2S composite were prepared using a hydrothermal method. The fabricated samples were characterized using different tools including UV-vis DRS, PL, powder XRD, TEM, and BET surface area measurements. Furthermore, the fluorometric sensing performance of the Ag2S and Pd/Ag2S samples was examined in the detection of organophosphate pesticides such as MLT, PRT, DZN, FNT, DCL, MCP, and CPS pesticides at room temperature. The quantitative detection of MLT, PRT, DZN, FNT, DCL, MCP, and CPS pesticides was achieved based on the Pd/Ag2S composite and organophosphate group-specific interaction. The optimized sensor exhibited a lower limit of detection (3.08 µM), excellent reproducibility, selectivity, and stability with an enhanced sensitivity of - 207.1 µA/µM cm2 (R2 = 0.98) in the range of 10 µM-100 µM for the detection of CPS pesticide. In addition, the fluorometric sensor has excellent selectivity, reproducibility, and stability, providing a feasible method for not only the detection of CPS pesticides but also other analytes in the future.

Magnetic resonance/fluorescence dual-modality contrast agents targeting αvβ6-overexpressing tumors based on A20FMDV2 peptide as a ligand

Pancreatic ductal adenocarcinoma (PDAC) is a malignant digestive system tumor with a poor late-stage prognosis. This study aimed to identify new methods for the early detection of PDAC. The nanoprobe A20FMDV2-Gd-5-FAM was developed using A20FMDV2 (N¹AVPNLRGDLQVLAQKVART²⁰-NH₂, A20FMDV2) as the ligand and characterized using dynamic light scattering, transmission electron microscopy, Fourier transform infrared analysis, and UV absorption spectroscopy. The binding of pancreatic cancer cells AsPC-1, MIA PaCa-2, and normal human pancreatic H6C7 cells (HPDE6-C7) to the probe was verified using laser confocal microscopy, and the biocompatibility of the probe was evaluated in vivo. In vivo magnetic resonance and fluorescence imaging were also performed on nude mice with subcutaneous pancreatic tumor xenografts to verify the bimodal imaging performance of the probe. The probe exhibited good stability and biocompatibility and an enhanced relaxation rate (25.46 ± 1.32 mM^-1 s^-1) than Gd-DTPA. Confocal laser scanning microscopy results revealed that the A20FMDV2-Gd-5-FAM probe could be successfully ingested and internalized, and infrared analysis results demonstrated that the probe was linked successfully. Finally, magnetic resonance T₁WI imaging and intravital fluorescence imaging demonstrated the specific signal enhancement of the probe at the tumor site. In conclusion, the bimodal molecular probe A20FMDV2-Gd-5-FAM showed a stable magnetic resonance and fluorescence bimodal imaging performance and is a promising new approach for diagnosing early-stage cancers with a high integrin α_vβ₆ expression.

Ratiometric and colorimetric probes with large stokes shift for sensing of exogenous hypochlorite in potato sprouts and industrial effluents

Being one of the important reactive oxygen species (ROS), hypochlorite ions (ClO^-) are involved in the control of several pathological and physiological processes. However, overexpression of ClO^- may prompt several disorders including cancer. Therefore, two fluorescein functionalized compounds with catechol (probe 1) and 2-naphthyl (probe 2) as substituents were synthesized through Schiff base reaction to recognize ClO^- in food items and industrial samples. While probe 2 exhibited turn-off fluorescent response towards ClO^- with limit of detection (LOD) of 86.7 nM, structurally alike probe 1 showed excellent ratiometric response with low detection limit (36.3 nM), large Stokes shift (353 nm), and 'fast' response time (15 s). ¹H NMR titration experiments favored spiroring opening of probe 1 upon the reaction with ClO^-. Probe 1 was successfully utilized for the monitoring of exogenous ClO^- in industrial samples. Further, fabrication of probe coated fluorescent paper strips and recognition of ClO^- in sprouting potato show diverse practical applicability of our probes.

A Selective and ''Off-On'' Fluorescent Chemosensor Based on Fluorescein for Al3+: Synthesis, Characterization, Spectroscopy Analyses, and DFT Calculation

An efficient fluorescent cation chemosensor based on fluorescein L4 was well prepared and identified with spectroscopy analyses. UV-vis and fluorescence measurements examined the analyte complexation of the L4 with various cations, demonstrating a clear tendency to Al³⁺ ion. In the Job plot study, a stoichiometry ratio of a complex between L4 and Al³⁺ ion was determined to be 1: 2 (L4: Al³⁺). A stoichiometry ratio of complex between L4 and Al³⁺ ion was determined to be 1: 2 (L4: Al³⁺) using the Job plot. The association constant (K_a) of the L4-Al³⁺ complex was found 2.8 × 10⁷ M^-2. The obtained limit of detection (LOD) value (1.37 × 10^-6 M for Al³⁺) exhibited the considerable sensitivity of the chemosensor L4 to Al³⁺ ion. DFT/TD-DFT calculations have also been employed to support the binding mode and photophysical properties of the complexation of chemosensor L4 to Al³⁺ ion and also to investigate the enhancement of L4 fluorescence by Al³⁺ ion.

Enhancing Dynamic Spectral Diffusion in Metal-Organic Frameworks through Defect Engineering

The crystal packing of organic chromophores has a profound impact on their photophysical properties. Molecular crystal engineering is generally incapable of producing precisely spaced arrays of molecules for use in photovoltaics, light-emitting diodes, and sensors. A promising alternative strategy is the incorporation of chromophores into crystalline metal-organic frameworks (MOFs), leading to matrix coordination-induced emission (MCIE) upon confinement. However, it remains unclear how the precise arrangement of chromophores and defects dictates photophysical properties in these systems, limiting the rational design of well-defined photoluminescent materials. Herein, we report new, robust Zr-based MOFs constructed from the linker tetrakis(4-carboxyphenyl)ethylene (TCPE^4-) that exhibit an unexpected structural transition in combination with a prominent shift from green to blue photoluminescence (PL) as a function of the amount of acid modulator (benzoic, formic, or acetic acid) used during synthesis. Time-resolved PL (TRPL) measurements provide full spectral information and reveal that the observed hypsochromic shift arises due to a higher concentration of linker substitution defects at higher modulator concentrations, leading to broader excitation transfer-induced spectral diffusion. Spectral diffusion of this type has not been reported in a MOF to date, and its observation provides structural information that is otherwise unobtainable using traditional crystallographic techniques. Our findings suggest that defects have a profound impact on the photophysical properties of MOFs and that their presence can be readily tuned to modify energy transfer processes within these materials.

The pursuit of xanthenoid fluorophores with near-infrared-II emission for in vivo applications

As fluorescence imaging in the second near-infrared window (NIR-II, 1000-1700 nm) has gained increasing attention, it is inevitable that NIR-II fluorophores, the cornerstone of NIR-II imaging, have come to the middle of the stage. NIR-II xanthenoid fluorophores with good stability, high brightness, and fluorescence adjustability are becoming popular. We here reviewed the recent progress of xanthenoid fluorophores with NIR-II emission for in vivo applications. Especially, we focus on the strategies used for longer wavelength and fluorescence regulation to construct OFF-ON or ratiometric NIR-II fluorescent probes.

Recent Progress in Smart Polymeric Gel-Based Information Storage for Anti-Counterfeiting

Information security protection has a tremendous impact on human life, social stability and national security, leading to the rapid development of anti-counterfeiting materials and related techniques. However, the traditional stored information on hard or dry media is often static and lacks functions, which makes it challenging to deal with increasing and powerful counterfeiting technologies. Modified intelligent polymeric gels exhibit color changes and shape morphing under external stimuli, which give them great potential for applications in information storage. This paper provides an overview of the latest progress in polymeric gel-based information storage materials in relation to counterfeiting. Following a brief introduction of anti-counterfeiting materials, the preparation methods for intelligent gels with adjustable colors (e.g., chemical colors and physical colors) and various encryption/decryption modes involving dimensions and diverse colors are outlined. Finally, the challenges and prospects for information storage and anti-counterfeiting based on smart gels are discussed.

Metal-Enhanced Hg2+-Responsive Fluorescent Nanoprobes: From Morphological Design to Application to Natural Waters

Metal-enhanced fluorescence (MEF) is a powerful tool in the design of sensitive chemical sensors by improving brightness and photostability of target-responsive fluorophores. Compounding these advantages with the modest hardware requirements of fluorescence sensing compared to that of centralized elemental analysis instruments, thus expanding the use of MEF to the detection of low-level inorganic pollutants, is a compelling aspiration. Among the latter, monitoring mercury in the environment, where some of its species disseminate through the food chain and, in time, to humans, has elicited a broad research effort toward the development of Hg²⁺-responsive fluorescent sensors. Herein, a Hg²⁺-sensitive MEF-enabled probe was conceived by grafting a Hg²⁺-responsive fluorescein derivative to concentric Ag@SiO₂ NPs, where the metallic core enhances fluorescence emission of molecular probes embedded in a surrounding silica shell. Time-resolved fluorescence measurements showed that the fluorophore's excited-state lifetime decreases from 3.9 ns in a solid, coreless silica sphere to 0.4 ns in the core-shell nanoprobe, granting the dye a better resistance to photobleaching. The Ag-core system showed a sizable improvement in the limit of detection at 2 nM (0.4 ppb) compared to 50 nM (10 ppb) in silica-only colloids, and its effectiveness for natural water analysis was demonstrated. Overall, the reported nanoarchitecture hints at the potential of MEF for heavy metal detection by fluorescence detection.

Fluorescent Nanosystems for Drug Tracking and Theranostics: Recent Applications in the Ocular Field

The greatest challenge associated with topical drug delivery for the treatment of diseases affecting the posterior segment of the eye is to overcome the poor bioavailability of the carried molecules. Nanomedicine offers the possibility to overcome obstacles related to physiological mechanisms and ocular barriers by exploiting different ocular routes. Functionalization of nanosystems by fluorescent probes could be a useful strategy to understand the pathway taken by nanocarriers into the ocular globe and to improve the desired targeting accuracy. The application of fluorescence to decorate nanocarrier surfaces or the encapsulation of fluorophore molecules makes the nanosystems a light probe useful in the landscape of diagnostics and theranostics. In this review, a state of the art on ocular routes of administration is reported, with a focus on pathways undertaken after topical application. Numerous studies are reported in the first section, confirming that the use of fluorescent within nanoparticles is already spread for tracking and biodistribution studies. The first section presents fluorescent molecules used for tracking nanosystems’ cellular internalization and permeation of ocular tissues; discussions on the classification of nanosystems according to their nature (lipid-based, polymer-based, metallic-based and protein-based) follows. The following sections are dedicated to diagnostic and theranostic uses, respectively, which represent an innovation in the ocular field obtained by combining dual goals in a single administration system. For its great potential, this application of fluorescent nanoparticles would experience a great development in the near future. Finally, a brief overview is dedicated to the use of fluorescent markers in clinical trials and the market in the ocular field.

Rh(III)-Catalyzed spiroannulation of ketimines with cyclopropenones via sequential C-H/C-C bond activation

An unprecedented Rh(III)-catalyzed [3+3]-spiroannulation of ketimines with cyclopropenones to access spiro[4,5]dienones has been developed. Sequential C-H/C-C bond activation and subsequent nucleophilic addition are disclosed in this process. This procedure represents the first example of the construction of spirolactams utilising cyclopropenones as 3C synthons. The remarkable advantages of this protocol are excellent chemo- and regio-selectivity, wide functional group tolerance, high reaction yields, and tolerance towards H₂O.

An Efficient Inclusion Complex Based Fluorescent Sensor for Mercury (II) and its Application in Live-Cell Imaging

The formation of an inclusion complex between hydroxypropyl-β-cyclodextrin (H-CD) and 4-acetylphenyl-4-(((6-chlorobenzo[d]thiazol-2-yl)-imino)-methyl)-benzoate (L) was investigated by FT-IR, ¹H-NMR, X-ray diffraction (XRD), FT-Raman, scanning electron microscope (SEM) techniques in the solid-state, absorption and emission spectroscopy in the liquid state and the virtual state as molecular docking technique. The binding properties of the inclusion complex (H-CD: L) with cations in deionized water was observed via absorbance and photoluminescence (PL) emission spectroscopy. The fluorescence probe (H-CD: L) inclusion complex (IC) was examined for several heavy metal cations, and identified that the PL emission wavelength of the complex displayed a continuous rise in the fluorescence intensity for Hg²⁺. A linearity range of 1 × 10^-8 - 11 × 10^-8 M and limit of detection value of 2.71 × 10^-10 M was found to be achieved for the detection of Hg²⁺. This outcome proves that the inclusion complex H-CD: L would be a promising material for the development a solid-state fluorescence probe for detecting Hg²⁺. It also shows application in real sample analysis and cell imaging.