Elucidation of Electrical and Optical Parameters of Poly(o-anthranilic acid)-poly(o-amino phenol)/Copper Oxide Nanocomposites Thin Films

Microwave-assisted of new derivatives of polyimine conjugated polymer based on Schiff base: synthesis, characterization, and photo-physical properties as a photoluminescent materials

The condensation of pyrrole-2,5-dicarbaldehyde (1) with 5-(2-amino-4-phenylthiazol-5-yl)-4-phenylthiazol-2-amine (2) and/or 5-(4-Amino-phenyl)-4-phenylthiazol-2-amine (3) gave new poly(Z)-N-((5-(iminomethyl)-1H-pyrrol-2-yl)methylene)-5-(2-((E)-(5-(iminomethyl)-I-pyrrol-2-yl)methyleneamino)-4-phenylthiazol-5-yl)-4-phenylthiaol-2-amine (P1) and/or poly(E)-N-((5-(iminomethyl)-1H-pyrrol-2-yl)methylene)-5-(4-((E)-(5-(iminomethyl)-1H-pyrrol-2-yl)methyleneamino)phenyl)-4-phenylthiaol-2-amine (P2) as a novel conjugated polymer by microwave irradiation and traditional heating.. It is evident that the microwave irradiation technique quickly raised the molecular weight of polyimines. In addition to quantifying the molecular weight of the resultant polyimines. All the polyimines were characterized using FTIR, XRD, H1NMR, TGA, and DSC. The optical characteristics of polyimine derivatives were investigated using a UV-Vis spectrophotometer. The absorption spectra showed a main absorption band around 372 nm for polyimine (P1) and 381 nm for polyimine (P2). The optical energy was calculated and found to be 2.49 and 2.68 eV. The photoluminescence of the polyimine derivatives was measured and analyzed by spectrofluorometer and Laser photoluminescence experiment and the emission color was studied using CIE graphs. The fluorescence spectra showed an emission peak at 548 nm for polyimine (P1) with yellow green color in CIE graph, while for polyimine (P2) the emission band was located at 440.5 nm with blue color in CIE graph. Photoluminescence quantum yield PLQY was measured for the polyimine P1 and P2 in both liquid and Solid states and indicated the AIE behavior of the polyimines. TD-DFT simulations were applied to the polyimine derivatives where the structures were geometrically optimized and the spectroscopic characterizations were evaluated.

Study of the structural characteristics, optical properties, and electrical conductivity of doped [P(An-MMa)/ZrO2]TF nanofiber composite using experimental data and TD-DFT/DMol3 computations

The powder form of the new nanofiber composite of poly(acrylonitrile-co-methylmethacrylate) (P(An-MMa)) with zirconium dioxide (ZrO2) was synthesized using the sol-gel method and subsequently converted to a thin film [P(An-MMa)/ZrO2]TF via the physical vapor deposition (PVD) technique. Numerous characterization techniques, including Raman spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and ultraviolet-visible (UV-Vis) optical spectroscopy, were used to characterize [P(An-MMa)/ZrO2]TF. Additionally, using density functional theory (DFT), optimization via time-dependent density functional theory (TD-DFT/DMol3) and Cambridge Serial Total Energy Bundle (TD-DFT/CASTEP) was developed. The TD-DFT calculations accurately matched the observed XRD and Raman spectra and validated the molecular structure of the examined materials. The average crystallite size of [P(An-MMa)/ZrO2]TF, as determined by XRD calculations, is 171.04 nm. The SEM image depicts a one-dimensional morphological structure made up of tightly packed fibrous nanowires or brushes. The optical properties of the films were determined using optical absorbance spectrophotometric results in the 200-850-nm wavelength range. The optical energy bandgaps computed using Tauc's equation for [P(An-MMa)/ZrO2]TF are 2.352 and 2.253 eV, respectively, whereas the isolated molecule of the composite [P(An-MMa)/ZrO2]Iso has a bandgap of 2.415 eV as determined by TD-DFT/DMol3. The optical characteristics predicted by CASTEP in TD-DFT are in good agreement with the experimental values. The investigated large optical energy bandgap nanofiber composite is advantageous for some energy storage applications.

Synthesis of Optically Tunable and Thermally Stable PMMA-PVA/CuO NPs Hybrid Nanocomposite Thin Films

We report the synthesis and comprehensive characterization of polymethylmethacrylate (PMMA)/polyvinylalcohol (PVA) polymeric blend doped with different concentrations of Copper oxide (CuO) nanoparticles (NPs). The PMMA-PVA/CuO nanocomposite hybrid thin films containing wt.% = 0%, 2%, 4%, 8%, and 16% of CuO NPs are deposited on glass substrates via dip-coating technique. Key optical parameters are measured, analyzed, and interpreted. Tauc, Urbach, Spitzer-Fan, and Drude models are employed to calculate the optical bandgap energy (E_g) and the optoelectronic parameters of PMMA-PVA/CuO nanocomposites. The refractive index and E_g of undoped PMMA-PVA are found to be (1.5-1.85) and 4.101 eV, respectively. Incorporation of specific concentrations of CuO NPs into PMMA-PVA blend leads to a considerable decrease in E_g and to an increase of the refractive index. Moreover, Fourier Transform Infrared Spectroscopy (FTIR) transmittance spectra are measured and analyzed for undoped and doped polymeric thin films to pinpoint the major vibrational modes in the spectral range (500 and 4000 cm^-1) as well as to elucidate the nature of chemical network bonding. Thermogravimetric analysis (TGA) is conducted under appropriate conditions to ensure the thermal stability of thin films. Doped polymeric thin films are found to be thermally stable below 105 °C. Therefore, controlled tuning of optoelectronic and thermal properties of doped polymeric thin films by introducing an appropriate concentration of inorganic fillers leads to a smart design of scaled multifunctional devices.

Evaluating the Toxicity and Histological Effects of Al2O3 Nanoparticles on Bone Tissue in Animal Model: A Case-Control Study

The applications of nanostructures have been limited by their different toxicities. So, the investigation of these toxicities is necessary before nanostructure application. This study aimed to evaluate the effect of aluminum oxide (Al₂O₃) nanoparticles on bone density in Wistar rat. Al₂O₃ nanoparticle was prepared by the sol-gel method. Characterization was done by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Sixty-four male adult Wistar rats were divided into eight groups including six groups intravenously treated with Al₂O₃ nanoparticle at concentrations of 25, 50, 100, 250, 500, and 1000 µg/ml: one group received food and water as the control group, and one group received food and water as well as intravenously distilled water as an injection control group. After 41 days, bone density was analyzed by dual-energy X-ray absorptiometry (DEXA). According to X-ray diffraction, the average particle size for Al₂O₃ nanoparticles was 20.85 nm. The data of densitometry showed that the bone density of right and left foot was reduced in concentrations of 250, 500, and 1000 µg/ml that were statistically significant in comparison with the control group. The reduction of bone density was increased with the enhancement of nanostructures concentration. The effect of Al₂O₃ nanoparticles on bone density was similar in the left and right legs. Histopatholological assessment also showed that Al₂O₃ nanoparticles (250, 500, and 1000 µg/ml) lead to significant reduction of trabeculae. Empty lacunae are observed in these three groups. Considering that high concentrations of Al₂O₃ nanoparticles had toxicity on bone tissue, it must be used by more caution, especially its use as a coating in different devices such as implants, surgical instruments, and bone prostheses.

Synthesis, DFT studies, fabrication, and optical characterization of the [ZnCMC]TF polymer (organic/inorganic) as an optoelectronic device

A novel carboxymethyl cellulose zinc thin film [ZnCMC]^TF was fabricated using the sol–gel technique.