Metal Organic Framework MIL-101(Cr): Spectroscopic Investigations to Reveal Iodine Capture Mechanism

Optimizing Typha biochar with phosphoric acid modification and ferric chloride impregnation for hexavalent chromium remediation in water and soil

Considering the persistent and covert nature of heavy metal soil contamination, the sustainable development of ecological environments and food safety is at significant risk. Our study focuses on remediating soils contaminated with chromium (Cr); we introduce an advanced remediation material, iron oxide phosphoric acid-loaded activated biochar (HFBC), synthesized through pyrolysis. This HFBC displays greater microporosity, fewer impurities, and enhanced efficiency for the remediation process. Our research utilized a comprehensive set of analytical techniques, including Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and X-ray Photoelectron Spectroscopy (XPS), alongside adsorption studies to elucidate the Cr removal mechanism. The effectiveness of HFBC in remediation was influenced by several factors: the pH level, dosage of HFBC, the initial concentration of Cr, and the ambient temperature. Our results indicated an optimal chromium (VI) adsorption capacity of 55.5 mg/g by HFBC at a pH of 6.0 and a temperature of 25 °C, with the process adhering to the pseudo-second-order kinetic model and the Langmuir adsorption isotherm, thus suggesting spontaneity in the uptake method. Moreover, this mechanism encompasses both adsorption and reduction reactions. Using HFBC in pot experiments with cabbage indicated not only an increase in soil pH and cation exchange capacity (CEC), but also a surge in bacterial community abundance. Significant reductions in bioavailable chromium were also recorded. Interestingly, HFBC addition bolstered the growth of cabbage, while concurrently diminishing chromium accumulation within the plant, particularly notable as the HFBC application rate increased. In summation, the HFBC produced in our study has demonstrated convincing efficacy in removing chromium from aqueous solutions and soil. Moreover, the positive agronomic implications of its use, such as enhanced plant growth and reduced heavy metal uptake by plants, indicate its high potential for operational value in the domain of environmental remediation of heavy metals.

Performance of MIL-101(Cr) and MIL-101(Cr)-Pore Expanded as Drug Carriers for Ibuprofen and 5-Fluorouracil Delivery

Metal-organic frameworks (MOFs) have been extensively investigated as nanocarriers for drug delivery applications owing to their remarkable surface area and porosity, which allow for impregnation of large quantities of drugs with fast pharmacokinetics. In this work, we developed a pore-expanded version of MIL-101(Cr), MIL-101(Cr)-P, and assessed its potential as a carrier for ibuprofen and 5-fluorouracil drugs along with its regular MIL-101(Cr) analogue. The pore expansion strategy gave rise to a higher surface area and mesopore volume for MIL-101(Cr)-P relative to regular MIL-101(Cr). The characterization results revealed successful incorporation of 30, 50, and 80 wt % of both drugs within the MOF structure. Upon incorporation of species, the surface area and porosity of the two MOF carriers decreased drastically; however, the drug-loaded MOFs still retained some degree of porosity, even at high drug loadings. For both drugs, the delivery experiments conducted in phosphate-buffered saline (PBS) showed that MIL-101(Cr)-P possessed better pharmacokinetic behavior than MIL-101(Cr) by delivering higher amounts of drug at all three loadings and exhibiting much faster release rates. Such behavior was originated from large mesopores that were created during pore expansion, providing diffusional pathways for efficient delivery of the drugs. The highest rate constant obtained by fitting the release kinetics to the Higuchi model was found to be 0.44 h-1/2 for the release of 30 wt % 5-fluorouracil from MIL-101(Cr)-P. The findings of this study highlight the role of tuning physiochemical properties of MOFs in improving their pharmacokinetic behavior as drug carriers.

Construction of Ketoenamine-Based Covalent Organic Frameworks with Electron-Rich Sites for Efficient and Rapid Removal of Iodine from Solution

Porous covalent organic frameworks (COFs) have been widely used for the efficient removal of iodine from solution due to their abundance of electron-rich sites. In this study, two kinds of ketoenamine-based COFs, TpBD-(OMe)2 and TpBD-Me2, are successfully synthesized via Schiff base reaction under solvothermal conditions using 1, 3, 5-triformylphoroglucinol as aldehyde monomer, o-tolidine and o-dianisidine as amino monomers. The ability of TpBD-(OMe)2 and TpBD-Me2 to adsorb iodine in cyclohexane or aqueous solutions has been quantitatively analyzed and interpreted in terms of adsorption sites. TpBD-Me2 possesses two adsorption sites, -NH- and -C=O, and exhibits an adsorption capacity of 681.67 mg/g in cyclohexane, with an initial adsorption rate of 0.6 g/mol/min with respect to COF unit cell. The adsorption capacity of TpBD-(OMe)2 can be as high as 728.77 mg/g, and the initial adsorption rate of TpBD-(OMe)2 can reach 1.2 g/mol/min in the presence of oxygen atoms between the methyl group and the benzene ring. Compared with TpBD-Me2, the higher adsorption capacity and adsorption rate of TpBD-(OMe)2 towards iodine are not only reflected in organic solvents, but also in aqueous solutions. It is proven through X-ray photoelectron spectroscopy and Raman spectroscopy that iodine exists in the form of I2, I3-, and I5- within TpBD-(OMe)2 and TpBD-Me2 after adsorption. This work not only expands the application of COFs in the field of iodine adsorption, but also provides research ideas and important an experimental basis for the optimization of iodine adsorption sites.

Silicone oils aided fabrication of paraffin wax coated super-hydrophobic sand: A spectroscopic study

To address the global alarm of desertification and boost plant progress in arid and desert environments, super-hydrophobic sand has been suggested and fabricated in numerous researches. In the present work, sand was hydrophobized by coating with a mixture of paraffin wax and silicone oils. The contact angle (CA) of sand with 4.5 w% silicone oils increased from 143.2° to 154.2° with decreasing the chain size of silicone oil, and the further addition of 13.5 w% of paraffin wax produced a super hydrophobic sand with a CA value up to 160° comparing to 154.2° without added paraffin wax. The Fourier Transform Infrared spectra suggested the development of inter molecular forces between silicone oil and sand as well as between paraffin and silicone oil, the driving force of which was the variation in viscosity of silicone oils. The later was higher in the case of lower molecular weight silicone oil. In particular, analyzing the characteristic bands of -(CH2)n-in paraffin wax, i.e. the corresponding bands at 720, 730, 1460 and 1470 cm-1 and the two bands at 1020 and 1095 cm-1 of silicone oil revealed that two roles of paraffin were taking place. While paraffin was placed between sand and silicone oil, it coated the sand particles when lower molecular weight silicone oil was used in the first procedures, whereas it coated the higher molecular weight silicone oil in the second procedures. Molecular dynamic calculation has been performed and confirmed the previous reached conclusions and showed that paraffin molecules were encapsulated in a silicone oil shell. The average adsorption energy of paraffin and silicon oil molecules on sand particles were 29.5 and 38.9 kcal mol-1 respectively.

Spectroscopic investigations to reveal synergy between polystyrene waste and paraffin wax in super-hydrophobic sand

Sand based superhydrophobic materials, such as paraffin-coated sand, are the focus of global research to fight land desertification. The present work investigates the development of paraffin-coated sand with extending service life as well as improving and stabilizing hydrophobic property by adding plastic waste. While the addition of polyethylene (PE) did not improve the hydrophobic property of paraffin coated sand, incorporating 4.5% of polystyrene (PS) in the composition of coated sand increased the contact angle. Fourier Transform Infrared spectroscopy (FTIR), X-ray diffraction patterns (XRD) and two-dimensional correlation spectroscopy (2D-COS) indicated that PS increased the molecular orientation of sand and reduced the thickness of the paraffin coating. Paraffin on the other hand improved the distribution of PS and prevented aggregation with sand. Both FTIR bands at 1085 cm^-1 and 462 cm^-1 were more sensitive to change in PS contents, while other bands at 780 cm^-1 and 798 cm^-1 were more sensitive to change in paraffin contents. Moreover, the XRD patterns of sand were split into two components by the addition of PS indicating the transformation of morphology to less ordered or more distorted form. 2D-COS is a powerful tool to reveal harmony of components in mixtures, extract information related to the role of each of them, and help in decision-making process regarding choosing the appropriate recipes.

Highly efficient iodine capture and ultrafast fluorescent detection of heavy metals using PANI/LDH@CNT nanocomposite

Here, the hybrid material of polyaniline/layered double hydroxide@carbonnanotubes (PANI/LDH@CNT) is considered a multifunctional material. Instrumental methods, including FTIR, XRD, TEM, SEM, and TGA/DTA were utilized to characterize PANI/LDH@CNT. The polymerization method created PANI/LDH@CNT as an adsorbent to remove toxic iodine in hexane solution with a capture capacity of 303.20 mg g^-1 during 9 h. It is 900 mg g^-1 in the vapor phase within 24 h. After three cycles, the PANI/LDH@CNT could be regenerated while maintaining 91.90 % iodine adsorption efficiency. Due to the presence of free amine (-N) groups, OH^-, CO₂H, and π-π conjugated structures in the PANI/LDH@CNT, it is also explored for efficient iodine uptake. It was demonstrated that the pseudo-first-order (PFO) and Langmuir model had the optimum correlation with the kinetic and isotherm data, respectively. Moreover, the use of PANI/LDH@CNT is not only limited to iodine capture; it can also be utilized as a sensitive sensor that displays a fluorescence "turn-off" response for Mn⁷⁺ and Cr⁶⁺ ions and a fluorescence "turn-on" response in the case of Al³⁺ ions. The fluorescence intensity of the PANI/LDH@CNT was turned off in the presence of Mn⁷⁺ and Cr⁶⁺ because of the fluorescence inner filter effect (IFE) mechanism. In contrast, the fluorescence intensity was turned on in the case of Al³⁺, relying on the chelation-enhanced fluorescence (CHEF) effect mechanism. Under optimal conditions, the limit of detection (LOD) of 51, 59, and 81 nM for Mn⁷⁺, Cr^6+, and Al³⁺, respectively. According to the literature, this is probably the first example based on PANI/LDH@CNT as a multifunctional hybrid material employed as an adsorbent for capturing radioactive iodine and as a chemosensor for detecting heavy metal ions in aqueous solutions.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Green photoreduction synthesis of dispersible gold nanoparticles and their direct in situ assembling in multidimensional substrates for SERS detection

Gold nanoparticles (AuNPs) and their composites have been applied in surface-enhanced Raman scattering (SERS) detection methods, owing to their stable and excellent surface plasmon resonance. Unfortunately, methods for synthesizing AuNPs often require harsh conditions and complicated external steps. Additionally, removing residual surfactants or unreacted reductants is critical for improving the sensitivity of SERS detection, especially when employing AuNPs-assembled multidimensional substrates. In this study, we propose a simple and green method for AuNPs synthesis via photoreduction, which does not require external surfactant additives or stabilizers. All the processes were completed within 20 min. Along this way, only methanol was employed as the electron acceptor. Based on this photoreduction synthesis strategy, AuNPs can be directly and circularly assembled in situ in multidimensional substrates for SERS detection. The removal of residual methanol was easy because of its low boiling point. This strategy was employed for the preparation of three different dimensional SERS substrates: filter paper@AuNPs, g-C₃N₄@AuNPs, and MIL-101(Cr)@AuNPs. The limit of detection of filter paper@AuNPs for thiabendazole SERS detection was 1.0 × 10^-7 mol/L, while the limits of detection of g-C₃N₄@AuNPs and MIL-101(Cr)@AuNPs for malachite green SERS detection were both 5.0 × 10^-11 mol/L. This strategy presents potential in AuNP doping materials and SERS detection.

Capture of Gaseous Iodine in Isoreticular Zirconium-Based UiO-n Metal-Organic Frameworks: Influence of Amino Functionalization, DFT Calculations, Raman and EPR Spectroscopic Investigation

A series of Zr-based UiO-n MOF materials (n=66, 67, 68) have been studied for iodine capture. Gaseous iodine adsorption was collected kinetically from a home-made set-up allowing the continuous measurement of iodine content trapped within UiO-n compounds, with organic functionalities (-H, -CH₃ , -Cl, -Br, -(OH)₂ , -NO₂ , -NH₂ , (-NH₂ )₂ , -CH₂ NH₂ ) by in-situ UV-Vis spectroscopy. This study emphasizes the role of the amino groups attached to the aromatic rings of the ligands connecting the {Zr₆ O₄ (OH)₄ } brick. In particular, the preferential interaction of iodine with lone-pair groups, such as amino functions, has been experimentally observed and is also based on DFT calculations. Indeed, higher iodine contents were systematically measured for amino-functionalized UiO-66 or UiO-67, compared to the pristine material (up to 1211 mg/g for UiO-67-(NH₂ )₂ ). However, DFT calculations revealed the highest computed interaction energies for alkylamine groups (-CH₂ NH₂ ) in UiO-67 (-128.5 kJ/mol for the octahedral cavity), and pointed out the influence of this specific functionality compared with that of an aromatic amine. The encapsulation of iodine within the pore system of UiO-n materials and their amino-derivatives has been analyzed by UV-Vis and Raman spectroscopy. We showed that a systematic conversion of molecular iodine (I₂ ) species into anionic I^- ones, stabilized as I^- ⋅⋅⋅I₂ or I₃ ^- complexes within the MOF cavities, occurs when I₂ @UiO-n samples are left in ambient light.

The effects of pH on U(VI)/Th(IV) and Ra(II)/Ba(II) adsorption by polystyrene-nano manganese dioxide composites: Fourier Transform Infra-Red spectroscopic analysis

Fourier Transform Infra-Red (FTIR) spectroscopy provides structural information of prime importance to understand ions coordination to adsorbents. This consequently aids in the design of improved ion exchange materials and help in deriving the optimum adsorption conditions. In the present work, the adsorption mechanism of both U(VI)/Th(IV) and Ra(II)/Ba(II) radionuclides couples onto polystyrene-nano manganese dioxide (PS-NMO) composite is reported in relation to the effect of working solution pH. The separation of each radionuclide couple; i.e. U(VI)/Th(IV) and Ra(II)/Ba(II); could be effectively achieved at pH = 3 and pH = 1 respectively. The pH values not only determine the species of the respected elements that are mainly present in aqueous solution before applying the adsorbent, but it also alters the structure of the composite adsorbent. FTIR spectroscopy showed that Th(IV) formed inner sphere complexes and occupied the A site in the dioxide layer, while U(VI) formed outer sphere complexes on the surface of the composite. Spectra subtraction showed that some aromatic bands and vinyl C-H bands were split or shifted to lower wavenumbers with the loading of Ba(II). This was attributed to changes in the composite stereochemistry to accommodate Ba(II). The working solution pH could be the key in the separation process of both U(VI)/Th(IV) and Ra(II)/Ba(II) from their mixture, and FTIR spectroscopy stands as a useful technique to explain the difference between metal ions responses to adsorbants.

Simultaneous detection of aqueous aluminum(III) and chromium(III) using Persea americana reduced and capped silver nanoparticles

There is a significant interest to develop sensing devices that detect water toxins, especially heavy metal ions. Although there have already been numerical reports on detecting toxic heavy metal ions, the use of adaptable devices could enable a broader range of sensing applications. Here, we used fresh peel extract (PeA) and dried peel extract (DPeA) of Persea americana (Avocado) as a reducing and capping agent to synthesize and stabilize AgNPs. The dimensions of NPs were controlled by tuning pH, temperature, and volume of the reducing agent. The sensitivity and selectivity of the AgNPs toward various metal ions viz. Ni(II), Cd(II), Al(III), Hg(II), Cr(III), Ba(II), Pb(II), Zn(II), Co(II), Mn(II), Cu(II), Ca(II), Mg(II), and K(I) were studied. The detection probe was found to be selective and sensitive toward Al(III) and Cr(III) ions with the detection limit of 0.04 ppm and 0.05 ppm, respectively. High-resolution transmission electron microscope (HRTEM), ultraviolet-visible (UV-Vis) spectroscopy, and dynamic light scattering (DLS) analysis results confirm an agglomeration-based mechanism for sensing both metal ions. This method can be exploited for the colorimetric detection of toxic heavy metals in real water samples.

Wide angle X-ray diffraction patterns and 2D-correlation spectroscopy of crystallization in proton irradiated poly(ether ether ketone)

Proton irradiated poly (ether ether ketone) (PEEK) films were crystallized to different extents, and subsequently characterized by wide angle X-ray diffraction technique. The data were analyzed by two-dimensional correlation mapping (2D-CM), in particular: Generalized, hybrid and multiple perturbations correlation approaches. Two asynchronous correlation peaks at (19.1, 18.7) ^o and at (22.5, 19.1) ^o were utilized as a measure the crystal perfection and the preferred process; orientation/crystal growth respectively. Proton irradiation not only favored the formation of crystal form II, but also changed the type of orientation within the irradiated films. Differential scanning calorimetry and Raman spectroscopic analysis confirmed the contribution of the previous two factors. Raman spectra indicated that the intensity of both bands at 1595 and 1608 cm⁻¹ decreased on samples crystallized from the melt, but increased on cold crystallized samples. 2D-CM combined with other suitable techniques is a promising in evaluating the structure of polymers and revealing the effect of proton irradiation.