Auto-combustion Synthesis and Characterization of Iron Oxide Nanoparticles (α-Fe2O3) for Removal of Lead Ions from Aqueous Solution

Purification, Characterization, and Assessment of Anticancer Activity of Iron Oxide Nanoparticles Biosynthesized by Novel Thermophilic Bacillus tequilensis ASFS1‏

Magnetic nanoparticles (MNPs), particularly iron oxide nanoparticles (IONPs), are a fascinating group of nanoparticles that have been considerably investigated for biomedical applications because of their superparamagnetic properties, biodegradable nature, and biocompatibility. A novel Gram-positive moderately thermophilic bacterial strain, namely Bacillus tequilensis ASFS.1, was isolated and identified. This strain is capable of producing superparamagnetic Fe3O4 nanoparticles and exhibiting magnetotaxis behavior. This strain swimming behavior was investigated under static and dynamic environments, where it behaved very much similar to the magnetotaxis in magnetotactic bacteria. This study is the first report of a bacterium from the Bacillaceae family that has the potential to intracellular biosynthesis of IONPs. MNPs were separated by a magnetic and reproducible method which was designed for the first time for this study. In addition, UV-visible spectrophotometer, Fourier-transform infrared spectroscopy, vibrating sample magnetometer, field emission scanning electron microscopy (FESEM), X-ray diffraction, and thermal gravimetric analysis were utilized to characterize the bio-fabricated magnetite nanoparticles. Analysis of the particle size distribution pattern of the biogenic MNPs by FESEM imaging revealed the size range of 10-100 nm with the size range of 10-40 nm MNPs being the most frequent particles. VSM analysis demonstrated that biogenic MNPs displayed superparamagnetic properties with a high saturation magnetization value of 184 emu/g. After 24 h treatment of 3T3, U87, A549, MCF-7, and HT-29 cell lines with the biogenic MNPs, IC50 values were measured to be 339, 641, 582, 149, and 184 μg mL-1, respectively. This study presents the novel strain ASFS.1 capable of magnetotaxis by the aid of its magnetite nanoparticles and paving information on isolation, characterization, and in vitro cytotoxicity of its MNPs. The MNPs showed promising potential for biomedical applications, obviously subject to additional studies.

Fe-NPs and Zn-NPs: Advancing Aquaculture Performance Through Nanotechnology

Aquaculture is a growing industry facing several challenges, including disease control, water quality management, and sustainable feed production. One potential solution to these challenges is the use of trace elements such as iron (Fe) and zinc (Zn), either in their conventional form or as nanoparticles (NPs). Aquatic animals need these micronutrients for normal growth, physiological processes, and overall health. In marine species, iron boosts development, immunity, and disease resistance. At the same time, zinc enhances metabolism, synthesizes essential enzymes, and produces hormones that play a part in defenses, growth, reproduction, and antioxidative activities. According to this review, species-specific requirements by different Fe and Zn compounds have all emphasized the impacts on animal growth and development, antioxidant capacity, reproductive efficiency, and immunological response. However, NPs of Fe and Zn have been found to have higher bioavailability and efficacy than conventional forms. This work examines the effects of applications of Fe and Fe nanoparticles (Fe-NPs) and Zn and Zn nanoparticles (Zn-NPs) in aquaculture. However, the source of Fe and Zn in aquaculture species and administration volume may significantly impact efficacy. Nanotechnology boosts the positive benefits of Fe and Zn by converting them to their nanoforms (Fe-NPs) and (Zn-NPs), which are better used by animals and have a broader intake range. As a result, Fe-NPs and Zn-NPs offer an effective method for using nutrients in aquaculture.

Removal of lead ions from wastewater using magnesium sulfide nanoparticles caged alginate microbeads

In this study, an adsorbent made of alginate (Alg) caged magnesium sulfide nanoparticles (MgS) microbeads were used to treat lead ions (Pb²⁺ ions). The MgS nanoparticles were synthesized at low temperatures, and Alg@MgS hydrogel microbeads were made by the ion exchange process of the composite materials. The newly fabricated Alg@MgS was characterized by XRD, SEM, and FT-IR. The adsorption conditions were optimized for the maximum removal of Pb²⁺ ions by adjusting several physicochemical parameters, including pH, initial concentration of lead ions, Alg/MgS dosage, reaction temperature, equilibration time, and the presence of co-ions. This is accomplished by removing the maximum amount of Pb²⁺ ions. Moreover, the adsorbent utilized more than six times with a substantial amount (not less than 60%) of Pb²⁺ ions was eliminated. Considering the ability of sodium alginate (SA) for excellent metal chelation and controlled nanosized pore structure, the adsorption equilibrium of Alg@MgS can be reached in 60 min, and the highest adsorption capacity for Pb²⁺ was 84.7 mg/g. The sorption mechanism was explored by employing several isotherms. It was found that the Freundlich model fits the adsorption process quite accurately. The pseudo-second-order model adequately described the adsorption kinetics.

Enhanced remediation of lead (II) and cadmium (II) ions from aqueous media using porous magnetic nanocomposites - A comprehensive review on applications and mechanism

Lead and Cadmium, identified as toxic heavy metals, cause significant imbalance in the eco-system due to their tendency to bioaccumulate. Remediation of heavy metals by conventional adsorptive materials suffer demerits related to low efficiency or removal. Among the variety of adsorbent materials used in the adsorption process, metal oxides- and graphene oxide magnetic nanocomposites have gained a considerable attention. The use of nanomaterials may help to reduce this contamination, but after use, they are difficult to remove from water. An added magnetic property to nanomaterials facilitates their retrieval after use. The magnetic properties of these hybrid magnetic nanocomposites, coupled with unique characteristics of organic and inorganic elements, have found extensive application in water treatment technology. Detailed discussion on functionalisation of magnetic nanocomposites and the enhanced performance are presented. Magnetic graphene oxide-covalently functionalized-tryptophan was reported to have the highest adsorption capacity of 766.1 mg/g for remediation of lead (II) ions and graphene oxide exhibited the highest adsorption capacity of 530 mg/g for Cd (II) ions. The adsorption mechanisms for heavy metal ions on the surface of novel adsorbents, particularly lead and cadmium, using magnetic nanocomposites have been explained with reference to the isotherm models studied. The future scope of research in this area of research is proposed.

Biosynthesis and characterization of iron oxide nanoparticles from Mentha spicata and screening its combating potential against Phytophthora infestans

Plant pathogens cause serious diseases to agricultural crops which lead to food insecurity in the world. To combat plant pathogens, various strategies have been developed including the use of agrochemicals. The overuse of these chemicals is now leading to the pesticide-resistant capability of pathogens. To overcome this problem, modern nanobiotechnology offers the production of alternative nano drugs. In this study, we used Mentha spicata for the synthesis of iron oxide nanoparticles using the green synthesis method. The synthesis of Fe2O3 NPs was confirmed through various characterizations. UV-Vis analysis detected a characteristic absorbance at the spectral range of 272 nm. The SEM micrographic analysis at various magnifications displayed circular or rod-shaped nanoparticles with a size ranging from 21 to 82 nm. The elemental EDX characterization showed intense peaks with a weight percent of 57, 34.93, and 8.07 for Fe, O, and, Cl respectively. TGA analysis showed that weight loss at 44-182, 500, and 660°C with no further modification indicates the thermal stability of iron oxide nanoparticles. FTIR spectrum of uncalined detects various bands at 3331, 1625, and 1,437 cm-1 for the hydroxyl group. After calcination two bands at 527 and 434 cm-1 were observed for Fe-O. The antimicrobial in vitro study showed maximum growth inhibition of Phytophthora infestans by the concentration of 100 μg ml-1 of Fe2O3-PE and Fe2O3 NPs. Therefore, this study resulted that bio-stable iron oxide nanoparticles can be used as alternative antimicrobial agents.

Magnetic sporopollenin supported polyaniline developed for removal of lead ions from wastewater: Kinetic, isotherm and thermodynamic studies

This study evaluated the synthesis of novel binary functionaladsorbent based on sporopollenin, magnetic nanoparticles, and polyaniline to produce MSP-PANI. The MSP-PANI was applied to enhance uptake of lead ions (Pb²⁺) from wastewater samples. The functionalities, surface morphology, magnetic properties, and elemental composition of the newly synthesized nanocomposite were investigated using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), vibration sample magnetometer (VSM), and energy-dispersive X-ray spectroscopy (EDX), respectively. The experimental condition for the adsorption process was MSP/PANI ratio 1:1, pH ∼6, adsorbent dosage 40 mg, and contact time 90 min at room temperature. Under the proposed condition, lead ions removal were obtained as 83%, 88% and 95% for MSPE, PANI, and MSP/PANI, respectively. Based on the experimental and predicted data, the adsorption was corresponded to the psudo-second-order (R² = 0.999) kinetics model, and the adsorption equilibrium corresponded to the Langmuir model (R² = 0.996). Langmuir isotherm showed the maximum adsorption capacity of MSP-PANI for lead ions was 163 mg/g and followed the monolayer pattern. Hence, thermodynamic model under Van't Hoff equation suggested that the adsorption mechanism was physio-sorption with endothermic nature. Therefore, this research can help the researchers to use magnetic nanoparticles for lead removal in highly polluted areas.

Systematic Investigation of Structural, Morphological, Thermal, Optoelectronic, and Magnetic Properties of High-Purity Hematite/Magnetite Nanoparticles for Optoelectronics

Iron oxide nanoparticles, especially hematite (α-Fe₂O₃) and magnetite (Fe₃O₄) have attained substantial research interest in various applications of green and sustainable energy harnessing owing to their exceptional opto-magneto-electrical characteristics and non-toxicity. In this study, we synthesized high-purity hematite and magnetite nanoparticles from a facile top-down approach by employing a high-energy ball mill followed by ultrasonication. A systematic investigation was then carried out to explore the structural, morphological, thermal, optoelectrical, and magnetic properties of the synthesized samples. The experimental results from scanning electron microscopy and X-ray diffraction corroborated the formation of highly crystalline hematite and magnetite nanoparticles with average sizes of ~80 nm and ~50 nm, respectively. Thermogravimetric analysis revealed remarkable results on the thermal stability of the newly synthesized samples. The optical studies confirmed the formation of a single-phase compound with the bandgaps dependent on the size of the nanoparticles. The electrochemical studies that utilized cyclic voltammetry and electrochemical impedance spectroscopy techniques verified these iron oxide nanoparticles as electroactive species which can enhance the charge transfer process with high mobility. The hysteresis curves of the samples revealed the paramagnetic behavior of the samples with high values of coercivity. Thus, these optimized materials can be recommended for use in future optoelectronic devices and can prove to be potential candidates in the advanced research of new optoelectronic materials for improved energy devices.

Iron-based materials for simultaneous removal of heavy metal(loid)s and emerging organic contaminants from the aquatic environment: Recent advances and perspectives

The existence of heavy metals and emerging organic contaminants in wastewater produces serious toxic residues to the environment. Developing cheap and efficient materials to remove these persistent pollutants is crucial. Iron-based materials are cost-effective and environmentally friendly catalysts, and their applications in the environmental field deserve attention. This paper critically reviewed the removal mechanisms of heavy metals and emerging organic pollutants by different influencing factors. The removal of pollutants (heavy metals and emerging organic pollutants) in a multi-component system was analyzed in detail. The mechanisms of synergism, antagonism and non-interference were discussed. This paper had a certain reference value for the research of wastewater remediation technology which could simultaneously remove various pollutants by iron-based materials.

Synthesis of CeO2-Fe2O3 Mixed Oxides for Low-Temperature Carbon Monoxide Oxidation

In this study, the CeO2-Fe2O3 mixed oxide catalysts have been prepared by combustion method using gel-created tartaric acid. The ability of effective carbon monoxide (CO) oxidation to carbon dioxide (CO2) by CeO2-Fe2O3 catalyst under low-temperature conditions was also demonstrated. The calcined CeO2-Fe2O3 material has a porous honeycomb structure and good gaseous absorption-desorption ability. The solid solution of CeO2-Fe2O3 mixed oxides was formed by the substitution of Fe+3 ions at some Ce4+ ion sites within the CeO2 crystal lattice. The results also showed that the calcination temperature and the molar ratio of Ce3+ ions to Fe3+ ions (CF) affected the formation of the structural phase and the catalytic efficiency. The catalytic properties of the CeO2-Fe2O3 mixed oxide were good at the CF ratio of 1 : 1, the average crystal size was near 70 nm, and the specific surface area was about 20.22 m2.g-1. The full conversion of CO into CO2 has been accomplished at a relatively low temperature of 270 °C under insufficient O2 conditions.

Sustainable chemical processing of flowing wastewater through microwave energy

Iron oxide nanostructured catalysts have emerged as potential candidates for efficient energy conversion and electrochemical energy storage devices. However, synthesis and design of nanomaterial plays a key role in its performance and efficiency. Herein, we describe a one-pot solution combustion synthesis (SCS) of α-Fe₂O₃ with glycine as a fuel, and a subsequent reduction step to produce iron-containing catalysts (i.e., Fe₃O₄, Fe-Fe₃O₄, and Fe⁰). The synthesized iron-based nanoparticles were investigated for methyl orange (MO) degradation through Microwave (MW) energy under continuous flow conditions. Fe-Fe₃O₄ showed higher MO degradation efficiency than α-Fe₂O₃, Fe₃O₄ and Fe⁰ at low absorbed MW power (i.e. 5-80 W). The enhanced degradation efficiency is associated to the combination of higher availability of electron density and higher heating effect under MW energy. Investigation of dielectric properties showed relative dielectric loss of Fe₃O₄, Fe-Fe₃O₄, and Fe⁰ as 3847, 2010, and 1952, respectively. The calculated average local temperature by the comparative analysis of MW treatment with conventional thermal (CT) treatment showed a marked thermal effect of MW-initiated MO degradation. This work highlights the potential of microwave-driven water depollution under continuous-flow processing conditions and demonstrates the positive impact that earth-abundant Fe catalyst synthesized by green SCS method can have over the treatment of wastewater.

Development and Characterization of Fe3O4@Carbon Nanoparticles and Their Biological Screening Related to Oral Administration

The current study presents the effect of naked Fe3O4@Carbon nanoparticles obtained by the combustion method on primary human gingival fibroblasts (HGFs) and primary gingival keratinocytes (PGKs)-relevant cell lines of buccal oral mucosa. In this regard, the objectives of this study were as follows: (i) development via combustion method and characterization of nanosized magnetite particles with carbon on their surface, (ii) biocompatibility assessment of the obtained magnetic nanoparticles on HGF and PGK cell lines and (iii) evaluation of possible irritative reaction of Fe3O4@Carbon nanoparticles on the highly vascularized chorioallantoic membrane of a chick embryo. Physicochemical properties of Fe3O4@Carbon nanoparticles were characterized in terms of phase composition, chemical structure, and polymorphic and molecular interactions of the chemical bonds within the nanomaterial, magnetic measurements, ultrastructure, morphology, and elemental composition. The X-ray diffraction analysis revealed the formation of magnetite as phase pure without any other secondary phases, and Raman spectroscopy exhibit that the pre-formed magnetic nanoparticles were covered with carbon film, resulting from the synthesis method employed. Scanning electron microscopy shown that nanoparticles obtained were uniformly distributed, with a nearly spherical shape with sizes at the nanometric level; iron, oxygen, and carbon were the only elements detected. While biological screening of Fe3O4@Carbon nanoparticles revealed no significant cytotoxic potential on the HGF and PGK cell lines, a slight sign of irritation was observed on a limited area on the chorioallantoic membrane of the chick embryo.