Removal and Release of the 2,4,5-Trichlorophenoxyacetic Acid Herbicide from Wastewater by Layered Double Hydroxides

Highly Efficient Removal of 2,4,5-Trichlorophenoxyacetic Acid by Adsorption and Photocatalysis Using Nanomaterials with Surface Coating by the Cationic Surfactant

Extensive removal of 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) using titania (TiO2) nanoparticles by adsorption and photocatalysis with a surface coating by cetyltrimethylammonium bromide (CTAB) is reported. The CTAB-coated TiO2 nanoparticles (CCTN) were characterized by FT-IR, zeta-potential measurements, and UV-vis diffuse reflectance spectroscopy (UV-vis-DRS). 2,4,5-T removal increased significantly after surface modification with CTAB compared with bare TiO2 nanoparticles. Optimal parameters affecting 2,4,5-T removal were found to be pH 4, CCTN dosage 10 mg/mL, and adsorption time 180 min. The maximum adsorptive removal of 2,4,5-T using CCTN reached 96.2% while highest adsorption capacity was 13.4 mg/g. CCTN was also found to be an excellent photocatalyst that achieved degradation efficiency of 99.2% with an initial concentration of 25 mg/L. The removal mechanisms of 2,4,5-T using CCTN by both adsorption and photocatalysis are discussed in detail based on changes in functional group vibrations and surface charge. Our results indicate that CCTN is an excellent material for 2,4,5-T removal in water by both adsorption and photocatalysis.

Recent Progress of Layered Double Hydroxide-Based Materials in Wastewater Treatment

Layered double hydroxides (LDHs) can be used as catalysts and adsorbents due to their high stability, safety, and reusability. The preparation of modified LDHs mainly includes coprecipitation, hydrothermal, ion exchange, calcination recovery, and sol-gel methods. LDH-based materials have high anion exchange capacity, good thermal stability, and a large specific surface area, which can effectively adsorb and remove heavy metal ions, inorganic anions, organic pollutants, and oil pollutants from wastewater. Additionally, they are heterogeneous catalysts and have excellent catalytic effect in the Fenton system, persulfate-based advanced oxidation processes, and electrocatalytic system. This review ends with a discussion of the challenges and future trends of the application of LDHs in wastewater treatment.

Antibacterial and Photocatalytic Activities of LDH-Based Sorbents of Different Compositions

Layered double hydroxides (LDHs) play a fundamental role in the processes for the abatement of pollutants in water, with reference to heavy metal decontamination. The research on the topic is multiobjective target oriented, aiming at combining environmental remediation with the possibility of reusing a sorbent as many times as possible, turning it into a renewable resource. In this study, the antibacterial and catalytic properties of a ZnAl-SO₄ LDH and its resulting product after being subjected to a Cr(VI) remediation process are compared. Both solid substrates have also been tested after undergoing a thermal annealing process. The sorbent (previously described and tested for remediation) has been investigated for its antibacterial activity in view of further surgery and drug delivery applications. Finally, its photocatalytic properties have been experimentally tested in the degradation of a model pollutant, i.e., Methyl Orange (MO), under solar-simulated light. Identifying the best recycling strategy for these materials requires an accurate knowledge of their physicochemical properties. The results show that both the antimicrobial activity and the photocatalytic performance may considerably improve after thermal annealing.

Soil self-cleaning capacity: Removal of organic compounds during sub-surface irrigation with sewage effluent

Globally, the reuse of treated sewage effluent for irrigation purposes is increasingly encouraged as a practical solution against the mismatch between the demand for and availability of freshwater resources. The reuse of sewage effluent for sub-surface irrigation (SSI) in agriculture serves the dual purpose of supplying water to crops and diminishing emissions of contaminants of emerging concern (CoECs) into surface water. To investigate such reuse, in a real scale cropland with SSI using sewage effluent, from September 2017 to March 2019 including the extremely dry year 2018, residues were followed of 133 CoECs as related to their physicochemical properties and quantified by liquid chromatography coupled to high-resolution mass spectrometry. Of the 133 target CoECs, 89 were retrieved in the field, most non-detect CoECs have low persistency. During the growing season with sub-surface irrigation, CoECs spread to the shallow groundwater and rhizosphere. Significantly lower concentrations are found between infiltration pipes as compared to directly next to the pipes in shallow groundwater for all persistency-mobility classes. CoECs belonging to the class pm (low persistency and low mobility) or class PM (high persistency and high mobility) class show no change amongst their removal in the rhizosphere and groundwater in a dry versus normal year. CoECs belonging to the class pM (low persistency and high mobility) show high seasonal dynamics in the rhizosphere and shallow groundwater, indicating that these CoECs break down. CoECs of the class Pm (high persistency and low mobility) only significantly build up in the rhizosphere next to infiltration pipes. Climatic conditions with dry summers and precipitation surplus and drainage in winter strongly affect the fate of CoECs. During the dry summer of 2018 infiltrated effluent is hardly diluted, resulting in significantly higher concentrations for the CoECs belonging to the classes pM and Pm. After the extremely dry year of 2018, cumulative concentrations are still significantly higher, while after a normal year during winter precipitation surplus removes CoECs. For all persistency-mobility classes in the shallow groundwater between the pipes, we find significant removal efficiencies. For the rhizosphere between the pipes, we find the same except for Pm. Next to the pipes however we find no significant removal for all classes in both the rhizosphere and shallow groundwater and even significant accumulation for Pm. For this group of persistent moderately hydrophobic CoECs risk characterization ratio's were calculated for the period of time with the highest normalized concentration. None of the single-chemical RCRs are above one and the ΣRCR is also far below one, implying sufficiently safe ambient exposures. Overall the deeper groundwater (7.0-11.8 m below soil surface) has the lowest response to the sub-surface irrigation for all persistency-mobility. When adopting a SSI STP effluent reuse system care must be taken to monitor the CoECs that are (moderately) hydrophobic as these can build up in the SSI system. For the deeper groundwater and for the discharge to the surface water, we find significant removal for the pM and the PM class but not for other classes. In conclusion, relatively high removal efficiencies are shown benefiting the surface waters that would otherwise receive the STP effluent directly.

Optimization, equilibrium, adsorption behaviour of Cu/Zn/Fe LDH and LDHBC composites towards atrazine reclamation in an aqueous environment

Cu-Zn-Fe Layered double hydroxides (LDH) and LDH dispersed on bamboo biochar (LDHBC) was used to study the adsorption of Atrazine by characterizing the adsorption kinetics, isotherms and response surface methodology (RSM) to reveal interactive effects of pH, adsorbent dosage and adsorbate initial concentration towards LDH optimum performance. The estimate of parameters determined for Langmuir isotherm quantities were in the range (21.84-37.91 mg/g) for LDH and (63.64-87.04 mg/g) for LDHBC. Regeneration and reusability after five cycles detected that the adsorption efficiencies of the adsorbents were reduced to 36% for LDH and 66% for LDHBC. Box Behnken design analysis could further reveal optimized conditions for higher Atrazine removal by LDH up to 74.8%. The adsorption mechanisms could be determined by π-π interactions occurring at the interfaces by hydrogen bonding and pore filling effects.