Hydrophobically associating terpolymers of acrylamide, alkyl acrylamide, and methacrylic acid as EOR thickeners

Facile synthesis of 2-hydroxy-β-cyclodextrin/polyacrylamide/carbazole hydrogel and its application for the treatment of infected wounds in a murine model

This work aimed to synthesize hydrogels by combining carbazole (Carb) with 2-hydroxy, β-cyclodextrin (HPβCD)/polyacrylamide (PAA) hybrid complexes. The hydrogels were then evaluated for their potential use in treating infected wounds. The physicochemical structures of the preparations were evaluated using several characterization methods including FTIR, FESEM, EDX, XRD, pH sensitivity, and TGA. Moreover, In vitro release, toxicity, antibacterial activity and in vivo infected wound healing activity were evaluated. Physicochemical testing verified the effective synthesis of the preparations and the timely release of Carb. The P(AA-co-AM)/HPβCD material exhibited an open structure characterized by macroscopic voids, whereas the hydrogels displayed surfaces that were not uniform. The FTIR analysis revealed the creation of a novel polymeric hydrogel composed of HPβCD as the main polymer structure. The hydrogels exhibited good reversible swelling and recoverable deformation, with an optimal swelling ratio of 30.12 achieved at pH 7.4. The antibacterial and safety of the formulations were validated by in vitro studies. β.Dex/PAA/Carb hydrogels have been shown to effectively expedite the healing of infected wounds by promoting the production of CD31, FGF-2, and COL1A, while reducing the levels of ROS, CD68, COX-2, and NF-κB. Overall, the combination of Carb, β.Dex, and PAA molecules had a synergistic impact on the healing process of infected wounds.

Development and Gelation Mechanism of Ultra-High-Temperature-Resistant Polymer Gel

To expand the applicability of gel fracturing fluids in ultra-high-temperature reservoirs, a temperature-resistant polymer was synthesized using the solution polymerization method. Subsequently, an ultra-high-temperature-resistant polymer gel was formulated by incorporating an organic zirconium crosslinking agent. A comprehensive investigation was carried out to systematically study and evaluate the steady shear property, dynamic viscoelasticity, and temperature and shear resistance performance, as well as the core damage characteristics of the polymer gel. The obtained results demonstrate that the viscosity remained at 147 mPa·s at a temperature of 200 °C with a shear rate of 170 s-1. Compared with the significant 30.9% average core damage rate observed in the guanidine gum fracturing fluid, the core damage attributed to the polymer gel was substantially mitigated, measuring only 16.6%. Finally, the gelation mechanism of the polymer gel was scrutinized in conjunction with microscopic morphology analysis. We expect that this study will not only contribute to the effective development of deep and ultradeep oil and gas reservoirs but also furnish a theoretical foundation for practical field applications.

Chitosan- and Alginate-Based Hydrogels for the Adsorption of Anionic and Cationic Dyes from Water

Novel hydrogel systems based on polyacrylamide/chitosan (PAAM/chitosan) or polyacrylic acid/alginate (PAA/alginate) were prepared, characterized, and applied to reduce the concentrations of dyes in water. These hydrogels were synthetized via a semi-interpenetrating polymer network (semi-IPN) and then characterized by Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), and their swelling capacities in water were measured. In the adsorption experiments, methylene blue (MB) was used as a cationic dye, and methyl orange (MO) was used as an anionic dye. The study was carried out using a successive batch method for the dye absorption process and an equilibrium system to investigate the adsorption of MO on PAAM/chitosan hydrogels and MB on PAA/alginate in separate experiments. The results showed that the target hydrogels were synthetized with high yield (more than 90%). The chemical structure of the hydrogels was corroborated by FTIR, and their high thermal stability was verified by TGA. The absorption of the MO dye was higher at pH 3.0 using PAAM/chitosan, and it had the ability to remove 43% of MO within 10 min using 0.05 g of hydrogel. The presence of interfering salts resulted in a 20–60% decrease in the absorption of MO. On the other hand, the absorption of the MB dye was higher at pH 8.5 using PAA/alginate, and it had the ability to remove 96% of MB within 10 min using 0.05 g of hydrogel, and its removal capacity was stable for interfering salts.

Investigating the effects of polymer plugging mechanism of liquid production decrease and improvement by the cross-linked gel performance

Polymer flooding, as the most successful and well-known chemical EOR method was broadly applied around the world. Mostly, contrasted with Waterflooding, the production rate decrease during polymer flooding is smaller based on field application. Nevertheless, the production liquid rate decreased critically in the middle phase to late phase due to plugging, which could lead the way to poor flooding performance and fewer cumulative oil. In this work, first, we approached the affecting polymer plugging mechanism model on liquid production decrease to investigate the parameters such as; solid-phase concentration (SOLIDMIN), reacting frequency factor (FREQFAC) and others affecting components are all investigated consecutively. Secondly the model approached by cross-linked gel for the improvement of production liquid rate. The physical work was designed by a physical model, and then the polymer adsorption that generating blockage emerging in permeability diminish assessed by a mathematical model. The outcomes specify that the existence of this debris, excessive assemblage of solid-phase and the excessive reactant frequency factor has major mechanical and physical parameters effects on the reservoir throughout polymer flooding. Polymer flood model base case liquid ratio loss is 11.15 m³/day between the years 2014-08-01 to 2020-03-04. Comparing with the polymer flood model case 1, liquid ratio loss ranging to 1.97 m³/day between the years 2014-08-02 to 2020-03-03. While the oil ratio loss of the polymer flood base case model between the years 2015-07-08 to 2020-03-04 attained 12.4 m³/day contrasting with the polymer flood model case 1 oil ratio increase to 0.37 m³/day between the years 2014-08-04 to 2019-04-02. The cross-linked gel model base case liquid ratio loss is 2.09 m³/day between the years 2015-01-02 to 2020-02-03, while the oil ratio lost reached 9.15 m³/day between the years 2015-09-01 to 2020-02-03. Contrasting with the cross-linked gel model case 2 liquid ratio recovered from the loss and attained 25.43 m³/day in the year 2020-12-01, while the oil ratio is reached 15.22 m³/day in the year 2020-12-01. Polymer flood model examined through cross-linked gel model performed reliable outcomes by taking out the plugging, which also occasioned the reservoir production rate to decrease. With the application of cross-linked gel the affected parameters and the production rate have achieved an improvement.

The seepage flow characteristics of hydrophobically associated polymers with different aggregation behaviours in porous media

The polymer solution for oil displacement is subjected to strong shear action in practical application, and this action will affect its percolation characteristics in porous media. The effects of mechanical shearing on the solution properties and seepage characteristics of modified hydrophobically associated polymers and dendrimers with two different aggregation behaviours were studied. The results showed that mechanical shearing did not affect hydrophobic microzones. Polymers can re-associate to restore part of the network structure, thereby improving shear resistance (dendritic hydrophobically associating polymers > hydrophobically modified partially hydrolysed polyacrylamide). Polymers with 'cluster' aggregation behaviour enhanced solution performance, enabling them to establish higher resistance coefficient (RF) and residual resistance factor (RRF) in porous media but also bringing about injection difficulties. Increasing the injection rate would increase the injection pressure, but the established RF and RRF showed a downward trend. Mechanical shear pretreatment effectively improved the injectability of the polymer. To achieve polymer injection and flow control, pre-shearing polymer solution and low-speed injection can be used in field applications.

Delayed Crosslinking Amphiphilic Polymer Gel System with Adjustable Gelation Time Based on Competitive Inclusion Method

Delayed crosslinking polymer gel systems are widely utilized in deep profile control processes for water production control in oilfields. In this paper, a kind of delayed crosslinking amphiphilic polymer gel system with adjustable gelation time based on competitive inclusion was prepared and its delayed crosslinking gelling properties were studied. The amphiphilic polymer of P(acrylamide (AM)⁻sodium acrylate (NaA)⁻N-dodecylacrylamide (DDAM)) was synthesized and it showed much better salt resistance, temperature resistance, and shear resistance performance compared with hydrolyzed polyacrylamide (HPAM). Phenol can be controlled released from the the cavity of β-cyclodextrin (β-CD) ring in the presence of the hydrophobic group used as the competitive inclusion agent in the amphiphilic polymer backbone. Accordingly, the gelation time of the delayed crosslinking amphiphilic polymer gel system is closely related to release rate of the crosslinker from the the cavity of β-CD ring. This study screened an amphiphilic polymer with good salt resistance and temperature resistance performance, which can be used in high temperature and high salinity reservoirs, and provided a feasible way to control the gelation time of the polymer gel system by the competitive inclusion method.

Preparation and properties of nanocomposites of β-cyclodextrin-functionalized polyacrylamide and its application for enhancing oil recovery

The introduction of nano-SiO₂can significantly improve the performance of β-cyclodextrin-functionalized polyacrylamide in various aspects.