Construction and evaluation of the hydroxypropyl methyl cellulose-sodium alginate composite hydrogel system for sustained drug release

Properties and release behavior of sodium alginate-based nanocomposite active films: Effects of particle size of IRMOF-3

Nanoparticles are used as fillers to improve the properties of biopolymers, and their particle size is an important parameter. This work aims to investigate the effect of particle size of isoreticular metal-organic framework-3 (IRMOF-3) on the mechanical, physical, and release properties of sodium alginate (SA)-based composite active film. In our study, IRMOF-3 with six different particle sizes was synthesized by introducing additives. IRMOF-3 loading with carvacrol (IRMOF-3/CA nanoparticles) was incorporated into the SA matrix to prepare the composite film. The characterization and testing results of films showed that the particle size of nanoparticles affected the physical morphology and chemical structure of the film. Especially smaller nanoparticles uniformly dispersed into the SA matrix more easily, forming a denser and more stable spatial network structure with SA, which could more significantly improve the tensile strength, water vapor barrier, and hydrophobic properties of the film (P < 0.05). In addition, the CA release rate from the active film could be significantly reduced by about 33.90 % even when the smallest particle size of the IRMOF-3/CA nanoparticles was added. Therefore, when IRMOF-3/CA is used as the nano-filler to develop SA-based active film, its particle size has a potential influence on the properties of the film.

Multi-layer encapsulation of pumpkin (Cucurbita maxima L.) seed protein hydrolysate and investigating its release and antioxidant activity in simulated gastrointestinal digestion

Because of their high protein content, easy access and low cost, pumpkin seeds are a valuable raw material for the preparation of antioxidant protein hydrolysates. Micro-coating is an effective method to protect bioactive compounds against destruction. In order to strengthen the alginate hydrogel network loaded with pumpkin seed protein hydrolysate (PSPH), CMC was added as part of its formulation in the first step, and chitosan coating was used in the second step. Then, swelling amount, release in the simulated gastrointestinal environment (SGI), antioxidant activity after SGI, Fourier transform infrared spectroscopy (FTIR), zeta potential, dynamic light scattering (DLS), polydispersity index (PDI) and scanning electron microscopy (SEM) of the samples were evaluated. The results showed that, the swelling amount of the chitosan-alginate hydrogel was lower than the chitosan-alginate-CMC sample, and with the increase in chitosan concentration, the swelling amount decreased. The release amount in the chitosan-alginate sample was higher than that in the chitosan-alginate-CMC sample, and with the increase in chitosan concentration, the release rate decreased. Also, the amount of release increased with the passage of time. The highest antioxidant activity belonged to the chitosan-alginate sample in SGI, and it increased with increasing the chitosan concentration. All findings demonstrated that the use of multi-component hybrid systems is a useful method for the protection of bioactive compounds against destruction, their antioxidant activities and their release behavior.

Chitosan based hybrid superabsorbent for controlled drug delivery application

In the present study, a hybrid chitosan-alginate superabsorbent is prepared using maleic acid as a cross-linker and acrylamide as a grafting agent using the free radical mechanism. The composite hydrogel shows good swelling capacity along with hemocompatibility and biocompatibility and hence it is utilized as a drug delivery device. The characterization techniques including x-ray diffraction, Fourier transform infrared, x-ray photoelectron spectroscopy, and thermal analysis indicate the successful synthesis of stable hydrogel with rich functionalities. Metformin hydrochloride is used as a model drug which is used to treat diabetes. The drug encapsulation is done using the swelling diffusion method after the synthesis of hydrogel. The release of metformin from the drug-loaded hydrogel at physiological pH highlights the role of non-covalent interactions between the drug and hydrogel. In vitro release studies of Metformin from the drug-loaded hydrogel show higher release profiles at intestinal pH (7.4) compared to stomach pH (1.2). The observed cumulative release is 82.71% at pH 7.4 and 45.67% at pH 1.2 after 10 h. Brunauer-Emmett-Teller analysis reveals the effect of surface area, pore size, and pore volume of hydrogel on the drug release. The drug release from the hybrid chitosan-alginate hydrogel is found to be more sustained in comparison to the pure chitosan hydrogel. For the present drug delivery system, the swelling-controlled release is found to be more dominating than the pH-controlled release. The synthesized hydrogel can be successfully employed as a potential drug delivery system for controlled drug delivery.

Towards superior biopolymer gels by enabling interpenetrating network structures: A review on types, applications, and gelation strategies

Gels derived from single networks of natural polymers (biopolymers) typically exhibit limited physical properties and thus have seen constrained applications in areas like food and medicine. In contrast, gels founded on a synergy of multiple biopolymers, specifically polysaccharides and proteins, with intricate interpenetrating polymer network (IPN) structures, represent a promising avenue for the creation of novel gel materials with significantly enhanced properties and combined advantages. This review begins with the scrutiny of newly devised IPN gels formed through a medley of polysaccharides and/or proteins, alongside an introduction of their practical applications in the realm of food, medicine, and environmentally friendly solutions. Finally, based on the fact that the IPN gelation process and mechanism are driven by different inducing factors entwined with a diverse amalgamation of polysaccharides and proteins, our survey underscores the potency of physical, chemical, and enzymatic triggers in orchestrating the construction of crosslinked networks within these biomacromolecules. In these mixed systems, each specific inducer aligns with distinct polysaccharides and proteins, culminating in the generation of semi-IPN or fully-IPN gels through the intricate interpenetration between single networks and polymer chains or between two networks, respectively. The resultant IPN gels stand as paragons of excellence, characterized by their homogeneity, dense network structures, superior textural properties (e.g., hardness, elasticity, adhesion, cohesion, and chewability), outstanding water-holding capacity, and heightened thermal stability, along with guaranteed biosafety (e.g., nontoxicity and biocompatibility) and biodegradability. Therefore, a judicious selection of polymer combinations allows for the development of IPN gels with customized functional properties, adept at meeting precise application requirements.

Citric acid cross-linked β-cyclodextrins: A review of preparation and environmental/biomedical application

The β-cyclodextrins (β-CD) are biocompatible macrocyclic candidates for the preparation of various composites with enhanced functions. While nontoxic and biodegradable citric acid (CA) is the favorite crosslinking agent for fabricating hierarchical advanced structures. The carboxyl and hydroxyl groups on CA can serve as "structural bridges" and enhance the solubility of β-CD. Leading to the construction of CA cross-linked β-CD with marvelous complicated structures and targeted functions. Here, we directly categorized the grafted composite materials into two main types such as organic and inorganic materials. Particularly, some representative composite materials are listed and analyzed in detail according to their preparation, advantages of unique characteristics, as well as the possible applications in environmental and biomedical fields such as adsorption of pollutants, sensors, and biomedical applications.

Application and development of hydrogel biomaterials for the treatment of intervertebral disc degeneration: a literature review

Low back pain caused by disc herniation and spinal stenosis imposes an enormous medical burden on society due to its high prevalence and refractory nature. This is mainly due to the long-term inflammation and degradation of the extracellular matrix in the process of intervertebral disc degeneration (IVDD), which manifests as loss of water in the nucleus pulposus (NP) and the formation of fibrous disc fissures. Biomaterial repair strategies involving hydrogels play an important role in the treatment of intervertebral disc degeneration. Excellent biocompatibility, tunable mechanical properties, easy modification, injectability, and the ability to encapsulate drugs, cells, genes, etc. make hydrogels good candidates as scaffolds and cell/drug carriers for treating NP degeneration and other aspects of IVDD. This review first briefly describes the anatomy, pathology, and current treatments of IVDD, and then introduces different types of hydrogels and addresses "smart hydrogels". Finally, we discuss the feasibility and prospects of using hydrogels to treat IVDD.

Conception of Cellulose/Alginate/Mesalazine microspheres by solvent evaporation technique for drug release: Experimental and theoretical investigations

Preparation of microspheres containing Mesalazine referred to as 5-aminosalicylic acid (5-ASA) for colon targeting drug was carried out using the emulsion solvent evaporation technique. The formulation was based on 5-ASA as the active agent, sodium Alginate (SA) andEthylcellulose (EC) as encapsulating agents, with polyvinyl alcohol (PVA) as emulsifier. The effects ofthe following processing parameters, 5-ASA %, EC:SA ratio and stirring rate on the properties of the resulting products in the form microspheres were considered. The samples were characterized using Optical microscopy, SEM, PXRD, FTIR, TGA, and DTG. In vitro release of 5-ASA from the different batches of microspheres was tested in biologically simulated fluids, (gastric; SGF, pH 1.2 for 2 h), then (intestinal fluid SIF, pH 7.4for 12 h) at 37 °C. The release kinetic results have been treated mathematically relaying on Higuchi's and Korsmeyer-Peppas' models for drug liberation. DOE study was performed to evaluate the interactive effects of variables on the drug entrapment and microparticle sizes. Molecular chemical interactions in structures were optimized using DFT analysis.

Chitosan-coated and thymol-loaded polymeric semi-interpenetrating hydrogels: An effective platform for bioactive molecule delivery and bone regeneration in vivo

Thymol (2-isopropyl-5-methylphenol; Thy) is a monoterpene phenolic phytocompound with medicinal properties; however, its impact on osteogenesis is yet to be thoroughly investigated. Its distribution is often hampered because of its intricate hydrophobic structure, which reduces its bioavailability. In this study, we synthesized a drug delivery vehicle using semi-interpenetrating polymer network (SIPN) hydrogels containing sodium alginate and poly(2-ethyl-2-oxazoline) (SA/Pox) loaded with Thy at varying concentrations (100, 150, and 200 μM). Subsequently, they were coated with chitosan (CS) to increase bioactivity and for sustained and prolonged release of Thy. Thy-loaded CS-coated SIPN hydrogels (SA/Pox/CS-Thy) were developed using ionic gelation and polyelectrolyte-complexation techniques. The addition of CS to hydrogels enhanced their physicochemical and material properties. These hydrogels were cytofriendly toward mouse mesenchymal stem cells (mMSCs). When mMSCs were cultured on hydrogels, Thy stimulated osteoblastic differentiation, as evidenced by calcium deposits at the cellular level. The expression of RUNX2, a key bone transcriptional factor, and other differentiation biomarkers was significantly enhanced in mMSCs cultured on SA/Pox/CS-Thy hydrogels. Notably, Thy in the SA/Pox/CS hydrogels significantly activated the TGF-β/BMP signaling pathway, which is involved in osteogenesis. A rat tibial bone defect model system revealed that the incorporation of Thy into SA/Pox/CS hydrogels augmented bone regeneration. Thus, sustained and prolonged release of Thy from the SA/Pox/CS hydrogels promoted osteoblast differentiation in vitro and bone formation in vivo. These findings shed light on the effect of Thy bioavailability in fostering osteoblast differentiation and its prospective application in bone rejuvenation.

Oil-in-water emulsion gels stabilized with cellulosic polymers and chitosan: Themorheological and physical-chemical evaluation

This research evaluated the use of different polymer ratios, hydroxypropyl methylcellulose (HPMC) and methylcellulose (MC) with chitosan (CHI), in the production of emulgel by emulsification. The concentration was fixed at 2 % (w/v) for all polymers. 60/40 sunflower oil-in-water emulgels were made with a cellulosic polymer:chitosan ratio of (80:20), (70:30), and (60:40), respectively. The objective was to study how different proportions of a cellulosic polymer combined with chitosan can affect the stability, microstructure, and rheology of the emulgels to be used as potential oil carrier systems. Droplet size and microscopy results show oil-in-water (O/W) emulgels, and their interface was stabilized by mixing polymeric pairs, HPMC:CHI or MC:CHI. In the thermal analysis, it was identified in the entire temperature range studied (5 to 85 °C) that both emulgels, HPMC:CHI and MC:CHI, were presented as gels (G' > G″). Thus, the addition of CHI to the systems modified their gelling behavior. Microscopy revealed that the emulsions at the 7th and 10th week of storage showed similar characteristics to the fresh emulsion. Therefore, these results indicate that the emulgels present good thermal resistance, the predominance of elastic behavior, and can retain high concentrations of oil in their structure (96 to 99 %).

Water and oil-resistant paper materials based on sodium alginate/hydroxypropyl methylcellulose/polyvinyl butyral/nano-silica with biodegradable and high barrier properties

Despite many technical challenges in the development of safe and environmentally friendly food packaging paper materials with excellent water and oil resistance using simple methods, producing paper-based functional materials using bio-based polymers is currently an important topic in the food packaging industry. In this study, novel water and oil-resistant coatings for the paper were developed through the combination of sodium alginate (SA), hydroxypropyl methylcellulose (HPMC), polyvinyl butyral (PVB), and hydrophobic silica nanoparticles (HSNPs). To impart oil-repellency to paper, SA and HPMC were first mixed uniformly and coated on the base paper, which was pre-treated with calcium chloride solution. A compact and tough coating layer was formed on paper due to the hydrogen bonding between SA and HPMC molecules, and the crosslinking between SA and Ca²⁺ ions in the base paper. High water resistance of the paper was achieved through the coating of PVB and HSNPs on top of the coating of SA/HPMC. The final coated paper demonstrated outstanding oil resistance (kit rating: 12/12), water resistance (Cobb value: 4.23 g/m²), low water vapor transmission rate (100 g/m²·24 h), and improved mechanical properties. This fluorine-free, and biodegradable barrier paper will find excellent applications in the food packaging industry.

A Comprehensive Review of Food Hydrogels: Principles, Formation Mechanisms, Microstructure, and Its Applications

Food hydrogels are effective materials of great interest to scientists because they are safe and beneficial to the environment. Hydrogels are widely used in the food industry due to their three-dimensional crosslinked networks. They have also attracted a considerable amount of attention because they can be used in many different ways in the food industry, for example, as fat replacers, target delivery vehicles, encapsulating agents, etc. Gels-particularly proteins and polysaccharides-have attracted the attention of food scientists due to their excellent biocompatibility, biodegradability, nutritional properties, and edibility. Thus, this review is focused on the nutritional importance, microstructure, mechanical characteristics, and food hydrogel applications of gels. This review also focuses on the structural configuration of hydrogels, which implies future potential applications in the food industry. The findings of this review confirm the application of different plant- and animal-based polysaccharide and protein sources as gelling agents. Gel network structure is improved by incorporating polysaccharides for encapsulation of bioactive compounds. Different hydrogel-based formulations are widely used for the encapsulation of bioactive compounds, food texture perception, risk monitoring, and food packaging applications.

Advanced Dome cellulose/alginate/chitosan composite matrix design with gastric and intestinal co-targeting capacities

Dome matrix was designed with gastric and intestinal targeting capacities using melatonin and caffeine as model drugs, and alginate, chitosan and cellulose as composite materials. The melatonin, caffeine and intermediate hydroxypropylmethylcelluose-based dispersible modules were prepared through compaction. Caffeine piled module was capped at both ends with melatonin void modules via intermediate dispersible modules into Dome matrix. Dispersion of intermediate module detached melatonin module from Dome matrix and had it floated in stomach providing a more complete melatonin release due to favorable pH-pKa relationship of dissolution medium and drug. With reference to the caffeine module, the detachment of melatonin module facilitated its gastrointestinal transit as a reduced size matrix, with majority of caffeine delivered in colon. The dual site-targeted and -release Dome matrix is applicable as reference oral carrier for pharmaceutical, nutraceutical, functional food and veterinary medicine where a complex formulation and performancein vivoare required.

Preparation and fertilizer retention/anti-leakage performances of superabsorbent composite based on hydroxypropyl methyl cellulose

To reduce the preparation cost of superabsorbent composites (SACs) and improve the water and fertilizer retention properties of soil, hydroxypropyl methylcellulose grafted with acrylic acid, polyaspartic acid and palygorskite (HPMC-g-P(AA-co-PASP)/ATP) was synthesized by aqueous solution polymerization and used to reduce of preventing water leakage in soil. The structure, surface morphology and thermal stability of the optimized SACs were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy and thermal gravimetric analysis. Under optimum synthesis conditions, the maximum equilibrium absorption of SACs was 1785 g·g^-1, 254 g·g^-1, 138 g·g^-1 in deionized water, tap water and NaCl solution (0.9 wt%) respectively. Application of the SACs to soils increased their water holding and water retention capacities. In addition, the reduced leaching of added urea and low water permeability of the treated soils indicated that the SACs has the potential for applications in future sustainable agriculture.

Electrochemical reduction of Cr(VI) in the presence of sodium alginate and its application in water purification

Chromium (Cr) is used in many manufacturing processes, and its release into natural waters is a major environmental problem today. Low concentrations of Cr(VI) are toxic to human health and living organisms due to the carcinogenic and mutagenic nature of this mineral. This work examined the conversion of Cr(VI) to Cr(III) via electrochemical reduction using gold electrode in an acidic sodium alginate (SA) solution and subsequent removal of the produced Cr(III)-SA by the polymer-enhanced ultrafiltration (PEUF) technique. A solution of SA in nitric acid was used both as an electrolytic medium during the voltammetric measurements and bulk electrolysis and as an extracting agent during the PEUF technique. The electroanalysis of Cr(VI) was performed by linear sweep voltammetry in the presence of acidic SA solution to study its voltammetric behavior as a function of the Cr(VI) concentration, pH, presence of Cr(III), SA concentration and scan rate. In addition, the quantitative reduction of Cr(VI) to Cr(III) was studied through the bulk electrolysis technique. The results showed efficient reduction with well-defined peaks at approximately 0.3 V vs. Ag/AgCl, using a gold working electrode. As the pH increased, the reduction signal strongly decreased until its disappearance. The optimum SA concentration was 10 mmol/L, and it was observed that the presence of Cr(III) did not interfere in the Cr(VI) electroanalysis. Through the quantitative reduction by bulk electrolysis in the presence of acidic SA solution, it was possible to reduce all Cr(VI) to Cr(III) followed by its removal via PEUF.

A sodium alginate-based sustained-release IPN hydrogel and its applications

Interpenetrating polymer network (IPN) hydrogels are crosslinked by two or more polymer networks, providing free volume space in the three-dimensional network structure, and providing conditions for the sustained and controlled release of drugs. The IPN hydrogels based on the natural polymer sodium alginate can form a stable porous network structure. Due to its excellent biocompatibility, the loaded drug can be sustained to the maximum extent without affecting its pharmacological effect. Sodium alginate-based IPN hydrogels have broad application prospects in the field of sustained and controlled drug release. This paper begins with an overview of the formation of alginate-based IPN hydrogels; summarizes the types of alginate-based IPN hydrogels; and discusses the pharmaceutical applications of alginate-based IPN hydrogels. We aim to give an overview of the research on IPN hydrogels based on sodium alginate in sustained and controlled drug release systems.

Preparation and performance characteristics of an environmentally-friendly agglomerant to improve the dry dust removal effect for filter material

The incomplete and uneven dust removal of a pulse filter greatly reduces the dust removal efficiency, which affects the efficiency, service life, and running resistance of dust removers. Therefore, due to improve the pulse cleaning effect, an agglomerant developed by free radical polymerization was added during dust removal. The optimal process conditions were determined by measuring the viscosity, surface tension, and atomization effect of the agglomerant solution. The phases, chemical composition, surface morphology, and morphology of the agglomerant and coal dust were characterized by infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and scanning electron microscopy. Molecular dynamics simulations were used to study the interaction mechanism between the agglomerant and coal dust. Finally, the dust removal performance under water mist conditions and agglomerate solution atomization was tested using a pulse filter. The results showed that a 0.3 % agglomerant solution effectively reduced the surface tension of the solution and displayed good wetting and bonding properties. Compared with water misting, the agglomerant solution subjected to an atomization rate of 2400 m³/h prolonged the filtration period, reduced the filtration resistance, and reduced the dust emission concentration. These results have important theoretical and practical significance for improving the dust removal effect of pulse filters.

Burgeoning Polymer Nano Blends for Improved Controlled Drug Release: A Review

With continual rapid developments in the biomedical field and understanding of the important mechanisms and pharmacokinetics of biological molecules, controlled drug delivery systems (CDDSs) have been at the forefront over conventional drug delivery systems. Over the past several years, scientists have placed boundless energy and time into exploiting a wide variety of excipients, particularly diverse polymers, both natural and synthetic. More recently, the development of nano polymer blends has achieved noteworthy attention due to their amazing properties, such as biocompatibility, biodegradability and more importantly, their pivotal role in controlled and sustained drug release in vitro and in vivo. These compounds come with a number of effective benefits for improving problems of targeted or controlled drug and gene delivery systems; thus, they have been extensively used in medical and pharmaceutical applications. Additionally, they are quite attractive for wound dressings, textiles, tissue engineering, and biomedical prostheses. In this sense, some important and workable natural polymers (namely, chitosan (CS), starch and cellulose) and some applicable synthetic ones (such as poly-lactic-co-glycolic acid (PLGA), poly(lactic acid) (PLA) and poly-glycolic acid (PGA)) have played an indispensable role over the last two decades for their therapeutic effects owing to their appealing and renewable biological properties. According to our data, this is the first review article highlighting CDDSs composed of diverse natural and synthetic nano biopolymers, blended for biological purposes, mostly over the past five years; other reviews have just briefly mentioned the use of such blended polymers. We, additionally, try to make comparisons between various nano blending systems in terms of improved sustained and controlled drug release behavior.