Preparation of hydroxypropyl methylcellulose/pueraria-based modified atmosphere film and its influence on delaying the senescent process of postharvest Agaricus bisporus

Based on the key factor of spontaneous modified atmosphere packaging (MAP)-gas permeability, a spontaneous MAP film was created for the preservation of Agaricus bisporus by delaying the senescence of white mushrooms. Compared with other mixed films, hydroxypropyl methylcellulose (HPMC)/pueraria (P)-2 showed better mechanical properties, barrier properties and thermal stability energy. Applying the HPMC/P-2 film for preserving white mushrooms can spontaneously adjust the internal gas environment. Moreover, the O2 concentration in the package remained stable at 1-2 %, and the CO2 concentration was between 8 % and 14 %. The film can effectively reduce the respiration rate of white mushrooms, inhibit enzymatic browning, maintain their good color and texture, and delay their aging. In conclusion, the HPMC/P-2 film can be used not only for fruit and vegetables preservation but also provide theoretical basis for sustainable food packaging.

Application of an Oscillatory Plug Flow Reactor to Enable Scalable and Fast Reactions in Water Using a Biomass-Based Polymeric Additive

The utilization of water as a sustainable reaction medium has important advantages over traditional organic solvents. Hydroxypropyl methylcellulose has emerged as a biomass-based polymeric additive that enables organic reactions in water through hydrophobic effects. However, such conditions imply slurries as reaction mixtures, where the efficacy of mass transfer and mixing decreases with increasing vessel size. In order to circumvent this limitation and establish an effectively scalable platform for performing hydroxypropyl methylcellulose-mediated aqueous transformations, we utilized oscillatory plug flow reactors that feature a smart dimensioning design principle across different scales. Using nucleophilic aromatic substitutions as valuable model reactions, rapid parameter optimization was performed first in a small-scale instrument having an internal channel volume of 5 mL. The optimal conditions were then directly transferred to a 15 mL reactor, achieving a three-fold scale-up without re-optimizing any reaction parameters. By precisely fine-tuning the oscillation parameters, the system achieved optimal homogeneous suspension of solids, preventing settling of particles and clogging of process channels. Ultimately, this resulted in a robust and scalable platform for performing multiphasic reactions under aqueous conditions.

Combination of Styrylbenzoazole Compound and Hydroxypropyl Methylcellulose Enhances Therapeutic Effect in Prion-Infected Mice

Prion diseases are fatal transmissible neurodegenerative disorders. Tremendous efforts have been made for prion diseases; however, no effective treatment is available. Several anti-prion compounds have a preference for which prion strains or prion-infected animal models to target. Styrylbenzoazole compound called cpd-B is effective in RML prion-infected mice but less so in 263K prion-infected mice, whereas hydroxypropyl methylcellulose is effective in 263K prion-infected mice but less so in RML prion-infected mice. In the present study, we developed a combination therapy of cpd-B and hydroxypropyl methylcellulose expecting synergistic effects in both RML prion-infected mice and 263K prion-infected mice. A single subcutaneous administration of this combination had substantially a synergistic effect in RML prion-infected mice but had no additive effect in 263K prion-infected mice. These results showed that the effect of cpd-B was enhanced by hydroxypropyl methylcellulose. The complementary nature of the two compounds in efficacy against prion strains, chemical properties, pharmacokinetics, and physical properties appears to have contributed to the effective combination therapy. Our results pave the way for the strategy of new anti-prion agents.

Ternary cyclodextrin systems of terbinafine hydrochloride inclusion complexes: Solventless preparation, solid-state, and in vitro characterization

Cyclodextrins (CD) are used extensively in the pharmaceutical industry to improve the water solubility and bioavailability of drugs. Preparing ternary systems by applying a third component can enhance these beneficial effects. The complexation methods of these ternary systems are the same as those of two-component complexes. These methods are solvent (co-evaporation, co-precipitation, etc.) or solventless "green" techniques (co-grinding, microwave irradiation, etc.). Using solvent-free methods is considered to be an economically and environmentally desirable technology. This study aimed to prepare ternary systems by the co-grinding method and evaluate the effect of a third component by comparing it to products obtained by solvent methods, binary systems, and marketed products. For that, we used terbinafine hydrochloride as a model drug, sulfobutyl-ether-beta-cyclodextrin as a complexation agent and 5 or 15 w/w% of polyvinylpyrrolidone K-90 (PVP) or hydroxypropyl methylcellulose (HPMC) as auxiliary components. Physicochemical evaluation (X-Ray Diffractometry, Differential Scanning Calorimetry, Thermogravimetry) showed that new solid phases were formed, while Scanning Electron Microscopy was performed to study morphological aspects of the products. Fourier transform infrared spectroscopic measurements suggested different intermolecular interactions depending on the type of polymer. In vitro dissolution studies showed beneficial effects of CD and further improvement with the applied polymers. Products showed less cell toxicity with one exception. Both polymers enhanced the physicochemical and in vitro properties, suggesting a greater bioavailability of the model drug. However, the percentage of polymers applied did not appear to be an influencing factor for these properties.

Impact of supplement of Qingke flours on physiochemical properties, sensory and in vitro starch digestibility of wheat bread and its enhancement by bread quality improvers

The aim is to upgrade the formulation to produce wheat bread with lower starch digestibility by supplemented with Qingke flour. Physiochemical properties of multi-scale Qingke flours were examined to select the most satisfied Qingke flour for breadmaking. Data showed multi-scale Qingke samples differed in total starch content, water/oil binding capacity, freeze-thaw stability, but had similar swelling capacity and thermodynamic properties. Addition of Qingke flours significantly reduced the total in vitro starch digestion of bread from 80% to 41% and decreased the rapidly digested starch content from 53% to 27%. However, Qingke flours caused a worse bread quality, texture and sensory e.g. lower bread specific volume (4.26-3.3 mL/g), larger hardness (398-1170 g) and chewiness (296-707 mJ). Meanwhile, hydroxypropyl methylcellulose, sodium stearoyl lactylate and transglutaminase could improve the bread quality and sensory. Lastly, results revealed Qingke-supplemented bread could generate new volatile compounds, hence having a different aroma compared to original wheat bread.

Polysaccharides in contact lenses: From additives to bulk materials

As the number of applications has increased, so has the demand for contact lenses comfort. Adding polysaccharides to lenses is a popular way to enhance comfort for wearers. However, this may also compromise some lens properties. It is still unclear how to balance the variation of individual lens parameters in the design of contact lenses containing polysaccharides. This review provides a comprehensive overview of how polysaccharide addition impacts lens wear parameters, such as water content, oxygen permeability, surface wettability, protein deposition, and light transmittance. It also examines how various factors, such as polysaccharide type, molecular weight, amount, and mode of incorporation into lenses modulate these effects. Polysaccharide addition can improve some wear parameters while reducing others depending on the specific conditions. The optimal method, type, and amount of added polysaccharides depend on the trade-off between various lens parameters and wear requirements. Simultaneously, polysaccharide-based contact lenses may be a promising option for biodegradable contact lenses as concerns regarding environmental risks associated with contact lens degradation continue to increase. It is hoped that this review will shed light on the rational use of polysaccharides in contact lenses to make personalized lenses more accessible.

The effect of the molecular structure of hydroxypropyl methylcellulose on the states of water, wettability, and swelling properties of cryogels prepared with and without CaO2

Hydroxypropyl methylcellulose (HPMC) belongs to the cellulose ether family that has hydroxyl groups substituted by hydrophobic methyl groups (DS) and hydrophilic hydroxypropyl groups (MS). Herein, the interactions between water molecules and cryogels prepared with HPMC in the presence and absence of a linear nonionic surfactant, as well as CaO₂ microparticles, which react with water producing O₂, were systematically investigated by sorption experiments and Time-Domain Nuclear Magnetic Resonance. Regardless of the DS and MS, most water molecules presented transverse relaxation time t2 typical of intermediate water and a small population of more tightly bound water. HPMC cryogels with the highest DS of 1.9 presented the slowest swelling rate of 0.519 ± 0.053 g_water/(g.s) and the highest contact angle values 85.250^o ± 0.004^o, providing the best conditions for a slow reaction between CaO₂ and water. The presence of surfactant favored hydrophobic interactions that allowed the polar head of the surfactant to be exposed to the medium, resulting in a higher swelling rate and lower contact angle values. The HPMC with the highest MS presented the fastest swelling rate and the lowest contact angle. These findings are relevant for the formulations and reactions, where tuning the swelling kinetics is crucial for the final application.

Development of a time-dependent oral colon delivery system of anaerobic Odoribacter splanchnicus for bacteriotherapy

Odoribacter (O.) splanchnicus is an anaerobic member of the human intestinal microbiota. Its decrease in abundance has been associated with inflammatory bowel disease (IBD), non-alcoholic fatty liver, and cystic fibrosis. Considering the anti-inflammatory properties of O. splanchnicus and its possible use for IBD, intestinal isolate O. splanchnicus 57 was here formulated for oral colonic release based on a time-dependent strategy. Freeze-drying protocol was determined to ensure O. splanchnicus 57 viability during the process. Disintegrating tablets, containing the freeze-dried O. splanchnicus 57, were manufactured by direct compression and coated by powder-layering technique with hydroxypropyl methylcellulose (Methocel™ E50) in a tangential-spray fluid bed. Eudragit® L was then applied by spray-coating in a top-spray fluid bed. Double-coated tablets were tested for release, showing gastric resistance properties and, as desired, lag phases of reproducible duration prior to release in phosphate buffer pH 6.8. The cell viability and anti-inflammatory activity of the strain were assessed after the main manufacturing steps. While freeze-drying did not affect bacterial viability, the tableting and coating processes were more stressful. Nonetheless, O. splanchnicus 57 cells survived manufacturing and the final formulations had 106-107 CFU/g of viable cells. The strain kept its anti-inflammatory properties after tableting and coating, reducing Escherichia coli lipopolysaccharide-induced interleukin-8 cytokine release from HT-29 cells. Overall, O. splanchnicus 57 strain was formulated successfully for oral colon delivery, opening new ways to formulate pure cultures of single anaerobic strains or mixtures for oral delivery.

Boosting the photodynamic activity of erythrosine B by using thermoresponsive and adhesive systems containing cellulose derivatives for topical delivery

Erythrosine displays potential photodynamic activity against microorganisms and unhealthy cells. However, erythrosine has high hydrophilicity, negatively impacting on permeation through biological membranes. Combining biological macromolecules and thermoresponsive polymers may overcome these erythrosine-related issues, enhancing retention of topically applied drugs. The aim of this work was to investigate the performance of adhesive and thermoresponsive micellar polymeric systems, containing erythrosine in neutral (ERI) or disodium salt (ERIs) states. Optimized combinations of poloxamer 407 (polox407) and sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as platforms for ERI/ERIs delivery. The rheological and mechanical properties of the systems was explored. Most of the formulations were plastic, thixotropic and viscoelastic at 37 °C, with suitable gelation temperature for in situ gelation. Mechanical parameters were reduced in the presence of the photosensitizer, improving the softness index. Bioadhesion was efficient for all hydrogels, with improved parameters for mucosa in contrast to skin. Formulations composed of 17.5 % polox407 and 3 % HPMC or 1 % NaCMC with 1 % (w/w) ERI/ERIs could release the photosensitizer, reaching different layers of the skin/mucosa, ensuring enough production of cytotoxic species for photodynamic therapy. Functional micelles could boost the photodynamic activity of ERI and ERIs, improving their delivery and contact time with the cells.

A hydroxypropyl methylcellulose/hydroxypropyl starch nanocomposite film reinforced with chitosan nanoparticles encapsulating cinnamon essential oil: Preparation and characterization

Active packaging derived from polysaccharides plays an important role in prolonging the shelf life of food. In this study, cinnamon essential oil (CEO)-loaded chitosan nanoparticles (CNs) were prepared and embedded in hydroxypropyl methylcellulose (HPMC)/hydroxypropyl starch (HPS) blends to enhance the physicochemical and biofunctional properties of the formed films. Different concentrations (25, 50, 75, and 100 μL/mL) of CEOs were encapsulated with CNs to form CEO-CNs, as confirmed by Fourier Transform Infrared Spectrometer (FTIR), X-Ray Diffraction (XRD), and scanning electron microscope (SEM) images. The prepared CEO-CNs were incorporated into the HPMC/HPS film-forming matrix to prepare reinforced nanocomposite films. SEM images showed that the CEO-CNs were dispersed in the HPMC/HPS matrix, thus filling the void space in the composite matrix and significantly improving the mechanical and barrier properties of the bio-nanocomposite films. The elongation at break of the reinforced films improved from 8.54 ± 0.53 MPa to 24.81 ± 0.47 MPa, and the water vapor permeability was reduced by nearly 30 %. FTIR and XRD analyses indicated the formation of hydrogen bonds between CEO-CNs and HPMC/HPS polymer molecules. Release studies showed that the nanocomposite film was capable of sustained release of CEO, which imparted antioxidant (radical scavenging activity of 27.66-42.19 %) and antimicrobial properties (inhibition of Escherichia coli and Aspergillus flavus growth). Therefore, these HPMC/HPS nanocomposite films with enhanced properties may have great potential for food preservation.

Mucoadhesive chitosan- and cellulose derivative-based nanofiber-on-foam-on-film system for non-invasive peptide delivery

Oromucosal administration is an attractive non-invasive route. However, drug absorption is challenged by salivary flow and the mucosa being a significant permeability barrier. The aim of this study was to design and investigate a multi-layered nanofiber-on-foam-on-film (NFF) drug delivery system with unique properties and based on polysaccharides combined as i) mucoadhesive chitosan-based nanofibers, ii) a peptide loaded hydroxypropyl methylcellulose foam, and iii) a saliva-repelling backing film based on ethylcellulose. NFF displays optimal mechanical properties shown by dynamic mechanical analysis, and biocompatibility demonstrated after exposure to a TR146 cell monolayer. Chitosan-based nanofibers provided the NFF with improved mucoadhesion compared to that of the foam alone. After 1 h, >80 % of the peptide desmopressin was released from the NFF. Ex vivo permeation studies across porcine buccal mucosa indicated that NFF improved the permeation of desmopressin compared to a commercial freeze-dried tablet. The findings demonstrate the potential of the NFF as a biocompatible drug delivery system.

Efficacy and Safety of a Drug-Free, Barrier-Forming Nasal Spray for Allergic Rhinitis: Randomized, Open-Label, Crossover Noninferiority Trial

INTRODUCTION

Symptoms of allergic rhinitis can be reduced by nonpharmacological nasal sprays that create a barrier between allergens and the nasal mucosa. A new nasal spray (AM-301) containing the clay mineral bentonite was tested for its ability to reduce symptoms of grass pollen.

METHODS

This open-label, crossover, noninferiority trial compared the efficacy and safety of AM-301 to that of hydroxypropyl methylcellulose (HPMC; Nasaleze® Allergy Blocker), an established barrier method. Adults with seasonal allergic rhinitis were exposed to Dactylis glomerata pollen, in a controlled setting, the Fraunhofer allergen challenge chamber, first without protection and then protected by HPMC or AM-301 (7 days apart). Efficacy was assessed from total nasal symptom score (TNSS), nasal secretion weight, and subjective rating. The primary endpoint was the difference, between AM-301 and HPMC, in least square mean change in TNSS over a 4-h exposure to allergen.

RESULTS

The study enrolled 36 persons, and 35 completed all study visits. The mean TNSS was 5.91 (SD = 1.45) during unprotected exposure, 5.20 (SD = 1.70) during protection with HPMC, and 4.82 (SD = 1.74) during protection with AM-301. The difference in least square means between the two treatments was -0.39 (95% CI: -0.89 to 0.10), establishing the noninferiority of AM-301. No difference in mean weight of nasal secretions was observed between the treatments. Efficacy was rated as good or very good for AM-301 by 31% and for HPMC by 14% of subjects. Sixteen subjects reported adverse events with a relationship to AM-301 or HPMC; most adverse events were mild, and none was serious.

DISCUSSION/CONCLUSION

AM-301 demonstrated noninferiority toward HPMC in the primary endpoint and was perceived better in subjective secondary endpoints. Both barrier-forming products had a persisting protective effect over 4 h and were safe.

In vitro and in vivo evaluation of a pH-, microbiota- and time-based oral delivery platform for colonic release

Several formulation strategies have been proposed for oral colon delivery, particularly for the therapy of inflammatory bowel disease (IBD). However, targeting the large intestine remains a challenging goal. The aim of this study was to develop and evaluate a novel type of drug delivery system, which is based on multiple drug release triggers for reliable performance. The system consists of: (i) a drug core, (ii) an inner swellable low-viscosity hydroxypropyl methylcellulose (HPMC) layer, and (iii) an outer film coating based on a Eudragit® S:high-methoxyl (HM) pectin (7:3 w/w) blend, optionally containing chitosan. Convex immediate release tablets (2 or 4 mm in diameter) containing paracetamol or 5-aminosalicylic acid (5-ASA) were coated in a fluid bed. The double-coated tablets exhibited pulsatile release profiles when changing the release medium from 0.1 N HCl to phosphate buffer pH 7.4. Also, drug release was faster in simulated colonic fluid (SCF) in the presence of fecal bacteria from IBD patients compared to control culture medium from tablets with outer Eudragit® S: HM pectin: chitosan coatings. The latter systems showed promising results in the control of the progression of colitis and alteration of the microbiota in a preliminary rat study.

Dithiothreitol-induced reassembly of soybean lipophilic protein as a carrier for resveratrol: Preparation, structural characterization, and functional properties

We employed dithiothreitol (DTT) to reassemble soy lipophilic protein (LP) and increased its solubility for encapsulating resveratrol (Res); we subsequently added hydroxypropyl methylcellulose (HPMC) to further stabilize Res. Physicochemical characterization, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and spectral analysis revealed that DTT triggered the breakage and reassembly of the disulfide bond. Consequently, the solubility of LP increased from 38.64 % to 71.49 %, and the number of free sulfhydryl groups increased to 7.84 mol·g-1. Furthermore, the encapsulation efficiency and structure of reassembled LP nanoparticles loaded with Res were found to be closely related to the DTT concentration used for induction. When HPMC was added, the LP-Res complex demonstrated spontaneous self-assembly, and the pH and temperature stability of the Res in the nanoparticles improved. An in vitro digestion simulation revealed that the reassembled LP was an efficient carrier for Res delivery. Particularly, HPMC improved the bioavailability and sustained release of Res.

Preparation and Evaluation of Hydrogel Film Containing Tramadol for Reduction of Peripheral Neuropathic Pain

To develop and assess new dosage forms for the alternative to existing oral medication for peripheral neuropathy, a hydrogel film in the skin patch formation containing tramadol hydrochloride (TRA), a water-soluble drug used as an analgesic, was prepared and evaluated. A hydrogel film composed of 20%(w/w) hydroxypropyl methylcellulose (HPMC) irradiated with electron beams had high transparency and elasticity similar to commercially available wound dressings and soft tissues, suggesting that it is a suitable substrate for TRA. The inclusion of TRA was enabled by immersing the HPMC hydrogel film in TRA aqueous solution. The release and skin permeation of TRA from TRA-containing hydrogel films differed depending on the electron beam dose. Moreover, the analgesic effects in mice were confirmed in a dose-dependent manner. This study demonstrated the usefulness of a hydrogel film containing TRA as a new dosage form alternative to the existing oral medication for peripheral neuropathy.

Preparation and in vitro evaluation of hot-melt extruded pectin-based pellets containing ketoprofen for colon targeting

This work developed high drug-load pellets for colon targeting in minimal steps by coupling hot-melt extrusion (HME) with a die-surface cutting pelletizer, offering a potential continuous pellet manufacturing process. Ketoprofen (KTP) was selected as a model drug for this study due to its thermal stability and severe upper gastrointestinal side effects. Low and high methoxyl grade pectins were the enzyme-triggered release matrix, and hydroxypropyl methylcellulose (HME 4 M/HME 100LV) was used as a premature release-retarding agent. The powder X-ray diffraction technique and the differential scanning calorimetry results revealed that KTP exists in the solid-solution state within the polymeric matrix after the HME step. The scanning electron micrographs of the fabricated pellets showed a smooth surface without any cracks. The lead formulation showed the lowest premature drug release (∼13%) with an extended KTP release profile over a 24 h period in the presence and absence of the release-triggering enzyme. The lead formulation was stable for 3 months at accelerated stability conditions (40 °C/75 ± 5% RH) concerning drug content, in vitro release, and thermal characteristics. In summary, coupling HME and pelletization processes could be a promising technology for developing colon-targeted drug delivery systems.

Fabrication and characterization of super-hydrophilic poly (ε-caprolactone)/hydroxypropyl methylcellulose (HPMC) based composite electrospun membranes for tissue engineering applications

Tissue engineering (TE) employs scaffolds as a structural support for initially seeding of cells followed by development of new tissues. Electrospun scaffolds generally function as a template of native extracellular matrix (ECM). The chemical composition of the scaffold and its surface morphology strongly influence the interaction between various cell types and materials. In this work, PCL and PCL/HPMC-based composite membranes with varying concentrations of HPMC (20-30% by weight) were fabricated using electrospinning technique. The membranes were evaluated for their surface, physio-chemical and biological properties. It was observed probably for the first time that blending of HPMC with PCL produced super-hydrophilic scaffolds. DSC studies confirmed the semi- crystalline nature of HPMC. PCL/HPMC composite scaffolds are found biocompatible from cytotoxicity assay. From the cell culture studies (apoptosis), PCL/HPMC composite scaffolds did not inhibit the adhesion of L929 cells due to their super-hydrophilic nature. The cell adhesion and spreading varied with HPMC concentration. PCL/HPMC (70/30) membranes showed highest cell adhesion among others due to its porous structure.

Hydroxypropyl methylcellulose-sugarcane bagasse adsorbents for removal of 17α-ethinylestradiol from aqueous solution and freshwater

Adsorbents made of hydroxypropyl methylcellulose (HPMC) and sugarcane bagasse (BG) microparticles were applied for the separation of 17α-ethinylestradiol (EE2) from aqueous solution in batch, and from aqueous solution and freshwater in fixed-bed columns. HPMC chains and BG microparticles were crosslinked by the esterification with citric acid. The adsorbents presented compression modulus values that increased from 208 ± 20 kPa (pure HPMC) to 917 ± 90 kPa, when the content of BG particles added to HPMC was 50 wt% (HPMC50BG). The porosity (~ 97%), specific surface area (1.16 ± 0.10 m²/g) and swelling degree (20 ± 1 g water/g) values were not affected by the addition of BG particles. The adsorption isotherms determined for EE2 on HPMC and on HPMC50BG fitted to the Langmuir and Freundlich models; the adsorption capacity of HPMC was slightly higher than that of composite HPMC50BG. Nevertheless, the addition of BG particles rendered outstanding mechanical reinforcement and dimensional stability to the adsorbents. The adsorption was driven by (i) hydrophobic interactions between EE2 methylene and aromatic groups and HPMC methyl groups, as evidenced by FTIR spectroscopy, and (ii) H bonds between HPMC and EE2 hydroxyl groups, as revealed by the adsorption enthalpy change (ΔH_ads) of - 45 kJ/mol. Column adsorption experiments of EE2 from aqueous solution on HPMC and HPMC50BG indicated adsorptive capacity (q₀) values of 8.06 mg/g and 4.07 mg/g, respectively. These values decreased considerably for the adsorption of EE2 from river water, probably due to the competition of EE2 with humic substances dissolved in natural water. The HPMC adsorbents could be recycled retaining up to 83% of the original efficiency.

Hybridization of glucosyl stevioside and hydroxypropyl methylcellulose to improve the solubility of lutein

In this paper, a lutein-glucosyl stevioside (stevia-G)-hydroxypropyl methylcellulose (HPMC) complex was prepared via an antisolvent precipitation combined with dynamic high pressure microfluidization method. The solubility, microstructure, crystallinity and thermodynamic properties of the freeze-dried powder were investigated, as well as the formation mechanism and the storage stability of the produced complex. When the optimal mass ratio of lutein, stevia-G, and HPMC was 1: 40: 0.5, the apparent solubility of lutein reached 2805.47 ± 24.94 μg·mL^-1, which was approximately 5600 times higher than that of lutein crystals. The lutein-stevia-G-HPMC complex formed an amorphous dispersed structure and was in a thermodynamically high energy state. The self-assembled micelle structure of stevia-G and HPMC polymer created a supersaturated system mainly by multiple hydrogen bonding, which promoted maximum lutein dissolving, delayed supersaturated crystallization process, and hindered precipitation. The present results suggested the complex formed by stevia-G and HPMC effectively promote lutein's hydrophilicity and stability.

Observation of curcumin-loaded hydroxypropyl methylcellulose (HPMC) oleogels under in vitro lipid digestion and in situ intestinal absorption in rats

Curcumin-loaded nanostructured lipid carriers (Cur-NLCs)-based hydroxypropyl methylcellulose (HPMC) oleogels (Cur-NLCs-HPMC-OGs) were fabricated using a cryogel template. The effect of the HPMC viscosity grade on the oleogel characteristics and in situ intestinal absorption were examined. Highly stable Cur-NLCs were prepared with a mean particle size of 314 nm and polydispersity index of 0.275. Cur-NLCs affected the creamy texture of self-standing Cur-NLCs-HPMC-OGs. The Cur-NLCs were tightly packed as oil droplets in the network of HPMC. However, a high viscosity of HPMC-4000 led to a greater ability to entrap and prevent droplet coalescence compared to a low viscosity of HPMC-400. NLCs promoted the release of free fatty acids during in vitro lipid digestion, whereas HPMC-4000 maintained the strength and durability of oleogels against mechanical and enzymatic breakdown. The in situ loop results revealed higher curcumin absorption by Cur-NLCs-HPMC-OGs than by Cur-HPMC-OGs. HMPC-4000 showed slightly higher curcumin absorption compared to HPMC-400.

Comparison of HPMC Inhalation-Grade Capsules and Their Effect on Aerosol Performance Using Budesonide and Rifampicin DPI Formulations

Despite the fact that capsules play an important role in many dry powder inhalation (DPI) systems, few studies have been conducted to investigate the capsules’ interactions with respirable powders. The effect of four commercially available hydroxypropyl methylcellulose (HPMC)inhalation-grade capsule types on the aerosol performance of two model DPI formulations (lactose carrier and a carrier-free formulation) at two different pressure drops was investigated in this study. There were no statistically significant differences in performance between capsules by using the carrier-based formulation. However, there were some differences between the capsules used for the carrier-free rifampicin formulation. At 2-kPa pressure drop conditions, Embocaps® VG capsules had a higher mean emitted fraction (EF) (89.86%) and a lower mean mass median aerodynamic diameter (MMAD) (4.19 µm) than Vcaps® (Capsugel) (85.54%, 5.10 µm) and Quali-V® I (Qualicaps) (85.01%, 5.09 µm), but no significant performance differences between Embocaps® and ACGcaps™ HI. Moreover, Embocaps® VG capsules exhibited a higher mean respirable fraction (RF)/fine particle fraction (FPF) with a 3-µm–sized cutoff (RF/FPF_{< 3 µm}) (33.05%/35.36%) against Quali-V® I (28.16%/31.75%) (P < 0.05), and a higher RF/FPF with a 5-µm–sized cutoff (RF/FPF_{< 5 µm}) (49.15%/52.57%) versus ACGcaps™ HI (38.88%/41.99%) (P < 0.01) at 4-kPa pressure drop condition. Aerosol performance variability, pierced-flap detachment, as well as capsule hardness and stiffness, may all influence capsule type selection in a carrier-based formulation. The capsule type influenced EF, RF, FPF, and MMAD in the carrier-free formulation.

The effect of erythrosine-B on the structuration of poloxamer 407 and cellulose derivative blends: In silico modelling supporting experimental studies

Erythrosine is a dye approved for medical use that has shown promising photodynamic activity, allowing for the inactivation of microorganisms and activity against malignant cells. Despite the great photodynamic potential, erythrosine exhibits hydrophilicity, negatively impacting its action in biological membranes. Therefore, the incorporation of erythrosine in micellar polymeric systems, such as poloxamers, may overcome this limitation. Moreover, using bioadhesive and thermoresponsive polymers to combine in situ gelation and bioadhesion may enhance retention of this topically applied drug. In this work, mucoadhesive and thermoresponsive micellar systems were prepared containing erythrosine in two states: the native form (ERI) and the disodium salt (ERIs). The systems were evaluated based on the effect of ERI/ERIs on the micellar structure of the binary polymer mixtures. Optimised combinations of poloxamer 407 (polox407) and mucoadhesive sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as micellar systems for ERI or ERIs delivery. The systems were studied with respect to theoretical interactions, qualitative composition, morphology, and micellar properties. In silico modelling indicated a higher interaction of the drug with poly(ethylene oxide) (PEO) than poly(propylene oxide) (PPO) fragments of polox407. Systems containing NaCMC displayed a repulsive effect in the presence of erythrosine, due to the polymer's charge density. Both systems could convert the photosensitizer in its monomeric form, ensuring photodynamic activity. In these mixtures, crystallinity, critical micellar temperature and enthalpy of polox407 micellisation were reduced, and micellar size, evaluated by transmission electron microscopy (TEM), showed low impact of ERI/ERIs in HPMC preparations. Aiming toward photodynamic applications, the findings showed how ERI or ERIs can affect the micellar formation of gels composed of 17.5% (w/w) polox407 and 3% (w/w) HPMC or 1% (w/w) NaCMC, important for understating their behaviour and future utilisation as erythrosine delivery systems.

Ophthalmic Viscosurgical Devices (OVDs) in Challenging Cases: a Review

Ophthalmic viscoelastic devices (OVDs) are currently used in cataract surgery and have significantly improved the safety and effectiveness of this surgical procedure. OVDs are classified according to the zero-shear viscosity and the cohesion-dispersion index in cohesive, dispersive, and viscoadaptives. OVDs create and maintain anterior chamber depth and visibility, protecting the corneal endothelium and other intraocular tissues during surgery. The selection of the most adequate OVD is especially relevant when performing cataract surgery in challenging cases, such as in hard, mature cataracts, flat anterior chamber, pseudoexfoliation syndrome, intraoperative floppy iris syndrome, or glaucoma surgery. In such cases, OVD is crucial for facilitating the surgical procedure and the associated minimal complication rate. The use of a combination of OVDs (soft-shell technique and modifications), the use of blue-colored OVDs, and the combination of sodium hyaluronate with lidocaine have also been described as useful tools in some of these challenging cases.

Preparation, characterization, and in vivo evaluation of levonorgestrel-loaded thermostable microneedles

To facilitate the storage and use of poly (lactic-co-glycolic acid) (PLGA)-based microneedles (MNs) in hot seasons and regions, thermally stable MNs loaded with levonorgestrel (LNG) were developed. Due to its good biocompatibility and high glass transition temperature (T_g), Hydroxypropyl methylcellulose (HPMC) was added to the PLGA-based MNs to increase thermal stability. MNs with HPMC exhibited excellent thermal stability at high temperatures. After the MNs has been applied to the skin for 10 min, the backing layer of the MNs was dissolved by contact with the interstitial fluid of skin, which resulted in the separation of the MN tips from the backing layer. The MN tips were implanted intradermally and sustained-release LNG. Biodegradable polymers were used to encapsulate the LNG, providing long-acting contraception. The in vitro release rate of LNG from the MNs reached 72.78%-83.76% within 21 days. In rats, the MNs maintained plasma concentrations of LNG above the human contraceptive level for 8-12 days. In mice, the time required for complete degradation of the MN tips was 12-16 days. MNs have excellent medication adherence due to the advantages of painlessness, minimally invasive, and self-administered. MNs can make long-acting contraceptives more readily available to humans.

Release kinetics of hydroxypropyl methylcellulose governing drug release and hydrodynamic changes of matrix tablet

BACKGROUND

Hydrophilic hydroxypropyl methylcellulose (HPMC) matrix tablets are the standard role model of the oral controlled-release formulation. Nevertheless, the HPMC kinetics for the mechanistic understanding of drug release and hydrodynamic behaviors are rarely investigated. This study aims to investigate the release behaviors of both HPMC and paracetamol (model drug) from the hydrophilic matrix tablet.

METHODS

Two different viscosity grades of HPMC were used (Low viscosity: 6 cps, High viscosity: 4,000 cps). Three different ratios of drug/HPMC (H:38.08%, M:22.85%, and L:15.23% (w/w) of HPMC amounts in total weight) matrix tablets were prepared by wet granulation technique. The release profiles of the drug and HPMC in a matrix tablet were quantitatively analyzed by HPLC and 1H-nuclear magnetic resonance (NMR) spectroscopy. The hydrodynamic changes of HPMC were determined by the gravimetric behaviors such as swelling and erosion rates, gel layer thickness, front movement data,and distributive near-infrared (NIR) chemical imaging of HPMC in a matrix tablet during the dissolution process.

RESULTS

High viscosity HPMC tablets showed slower release of HPMC than the release rate of drug, suggesting that drug release preceded polymer release.Different hydration phenomenon was qualitatively identified and corresponded to the release profiles. The release behaviors of HPMC and drug in the tablet could be distinguished with the significant difference with fitted dissolution kinetics model (Low viscosity HPMC 6cps; Korsmeyer-Peppas model, High viscosity HPMC 4000cps; Hopfenberg model, Paracetamol; Weibull model) according to the weight of ingredients and types of HPMC.

CONCLUSION

The determination of HPMC polymer release correlating with drug release, hydrodynamic behavior, and NIR chemical imaging of HPMC can provide new insights into the drug release-modulating mechanism in the hydrophilic matrix system.

Cellulase as an "active" excipient in prolonged-release HPMC matrices: A novel strategy towards zero-order release kinetics

Hydrophilic matrices are of utmost interest for oral prolonged release of drugs. However, they show decreasing release rate over time, mainly due to lengthening of the diffusional pathway across the gel formed upon glass-rubber transition of the polymer. Therefore, achievement of zero-order release kinetics, which could reflect in constant drug plasma levels, is still an open issue. With the aim of improving the release performance of hydroxypropyl methylcellulose (HPMC) systems, the use of cellulolytic enzymes was proposed to aid erosion of the swollen matrix, thereby counteracting the release rate decrease particularly toward the end of the process. The effectiveness of this strategy was evaluated by studying the mass loss and drug tracer release from tableted matrices consisting of high-viscosity HPMC (Methocel® K4M), Acetaminophen and increasing amounts (0.5-10% on HPMC) of a cellulolytic product (Sternzym® C13030). A faster erosion and progressive shift to linearity of the overall release profiles were observed as a function of the enzyme concentration. Release was markedly linear from matrices containing 5 and 10% Sternzym® C13030. In partially coated matrices with these cellulase concentrations, such results were in agreement with data of erosion and swelling front movement, which exhibited early and long-lasting synchronization.

Development and optimization of a new tioconazole vaginal mucoadhesive film using an experimental design strategy. Physicochemical and biological characterization

A new tioconazole (TCZ) mucoadhesive film, based on a biodegradable chitosan/ hydroxypropyl methylcellulose (CH/HPMC) blend, was developed for treatment of vaginal candidiasis. The formulation was optimized through an I-optimal design (minimizing the integral of the prediction variance across the factor space), where the impact of the proportion of the ingredients and processing variables on the quality of the final product was evaluated. Both, the thickness of the film and the swelling index, which affect patients' comfort and compliance, were considered. Mechanical testing, such as load at break, elongation at break, and mucoadhesive strength were also included as dependent variables. The optimal mucoadhesive film formulation, which should be obtained at a drying temperature of 30 °C, was found to include the combination of CH and HPMC (forming polymers) at 0.25:0.75 ratio, a mixture of polyethylene glycol 400 and propylene glycol as plasticizers (0.07:0.93, 5% w/w), and TCZ loaded at 15 % w/w. The optimal preparation was subjected to exhaustive characterization studies, which revealed that the drug was entrapped in the polymeric matrix in an amorphous state and that the film exhibited a smooth and uniform surface, demonstrating excellent component compatibility. In vitro tests showed that the formulation has an excellent time to kill value (3 min) and lacks cytotoxicity, suggesting that it should be highly effective and safe.

Hydroxypropyl methylcellulose: Physicochemical properties and ocular drug delivery formulations

Hydroxypropyl methylcellulose (HPMC) is a cellulose ether widely used in drug formulations due to its biocompatibility, uncharged nature, solubility in water and thermoplastic behavior. Particularly for ocular and ophthalmic formulations, HPMC is applied as viscosity enhancer agent in eye drops, gelling agent in injections, and polymeric matrix in films, filaments and inserts. The different therapeutic approaches are necessary due to the complex anatomic structure of the eye. The natural ocular barriers and the low drug permeation into the circulatory system make the drug administration challenging. This review presents the eye anatomy and the usual local routes of drugs administration, which are facilitated by the physicochemical properties of HPMC. The relationship between chemical structure and physicochemical properties of HPMC is displayed. The different types of formulations (local application) including HPMC for ocular drug delivery are discussed with basis on recent literature reports and patents.

3D printing of gummy drug formulations composed of gelatin and an HPMC-based hydrogel for pediatric use

The 3D printing of drug formulations is a promising method for preparing tailored medicines following the approval of 3D printed tablets by the US FDA in 2015. Appropriate dosage forms for pediatric patients are deficient because drugs have been developed for mainly adult patients. Here, we fabricated gummy drug formulations for pediatric patients using a 3D bioprinter compatible with semi-solid materials such as hydrogels and pastes. The gummy drug formulations were composed of gelatin, HPMC, reduced syrup, water and the antiepileptic drug lamotrigine. The formulations were extruded from the nozzle of the 3D bioprinter under air pressure and laminated from the bottom in a layer-by-layer process. The incorporation of HPMC aided smooth printing at room temperature, and gelatin and HPMC affected the viscosity of the drug formulation and the printability of the formulations. The strength of the gummy formulations was remarkably influenced by the gelatin concentration. Dissolution tests showed 85% drug release within 15 min from most formulations. The results suggest that 3D printing is an effective method for preparing gummy drug formulations with various shapes in different colors, and that the methodology may improve drug adherence of pediatric patients in future clinical settings.

The states of water in tryptophan grafted hydroxypropyl methylcellulose hydrogels and their effect on the adsorption of methylene blue and rhodamine B

Tryptophan (Trp) decorated hydroxypropyl methylcellulose (HPMC) cryogels were prepared by a one-step reaction with citric acid. The increase of Trp content in the 3D network from 0 to 2.18 wt% increased the apparent density from 0.0267 g.cm^-3 to 0.0381 g.cm^-3 and the compression modulus from 94 kPa to 201 kPa, due to hydrophobic interactions between Trp molecules. The increase of Trp content in HPMC-Trp hydrogels increased the amount of non-freezing water, estimated from differential scanning calorimetry, and the amount of freezing water, which was determined by time-domain nuclear magnetic resonance. The adsorption capacity of methylene blue (MB) and rhodamine B (RB) on HPMC-Trp hydrogels increased with Trp content and the amount of freezing water. HPMC-Trp hydrogels could be recycled 6 times keeping the original adsorptive capacity. The diffusional constants of MB and RB tended to increase with Trp content. RB adsorbed on HPMC-Trp hydrogels presented a bathochromic shift of fluorescence.

Interaction between mucoadhesive cellulose derivatives and Pluronic F127: Investigation on the micelle structure and mucoadhesive performance

Systems composed of bioadhesive and thermoresponsive polymers can combine in situ gelation with bio/mucoadhesion, enhancing retention of topically applied drugs. The effect of bioadhesive sodium carboxymethylcellulose (NaCMC) and hydroxypropyl methylcellulose cellulose (HPMC) on the properties of thermoresponsive Pluronic® F127 (F127) was explored, including micellization and the mucoadhesion. A computational analysis between these polymers and their molecular interactions were also studied, rationalising the design of improved binary polymeric systems for pharmaceutical and biomedical applications. The morphological characterization of polymeric systems was conducted by SEM. DSC analysis was used to investigate the crystallization and micellization enthalpy of F127 and the mixed systems. Micelle size measurements and TEM micrographs allowed for investigation into the interference of cellulose derivatives on F127 micellization. Both cellulose derivatives reduced the critical micellar concentration and enthalpy of micellization of F127, altering hydrodynamic diameters of the aggregates. Mucoadhesion performance was useful to select the best systems for mucosal application. The systems composed of 17.5% (w/w) F127 and 3% (w/w) HPMC or 1% (w/w) NaCMC are promising as topical drug delivery systems, mainly on mucosal surfaces. They were biocompatible when tested against Artemia salina, and also able to release a model of hydrophilic drug in a controlled manner.

3D printing of extended-release tablets of theophylline using hydroxypropyl methylcellulose (HPMC) hydrogels

An extrusion based 3D printer was used to prepare the semi-solid tablets with different drug loading dosages (75, 100, 125 mg) under ambient temperature. The active pharmaceutical ingredient, theophylline, was uploaded within the hydrogels prepared of hydroxypropyl methylcellulose (HPMC) K4M or E4M. The HPMC concentrations were adjusted to different levels (10 and 12% w/w) to fulfill the requirements for 3D printing. Rheological and textural properties, as well as release profiles, were significantly affected by the type and concentration of excipient regardless of theophylline doses used. The printing material should exhibit shear-thinning behavior, keeping yield stress less than 4000 Pa and a loss factor (tanδ = G''/G') between 0.2 and 0.7, especially for 3D printing purposes using the current platform. The SEM images demonstrated that the hydrogel matrix exhibited a porous structure, which had the potential to encapsulate the theophylline clusters within its microstructure. The in vitro dissolution test showed that the release of all tablets was extended over 12 h, and the calculation of drug release kinetic models revealed that the 3D printed HPMC matrices release the theophylline by diffusion and erosion mechanisms. The excipient HPMC K4M 12% w/w hydrogel was optimal to load the theophylline with flexible dosage combinations due to the great extrudability and shape retention ability. The exploration of rheological properties was investigated in this study, and the results revealed that it is a feasible method to predict the SSE 3D printability and quality of hydrogel-API blend materials for the drug delivery system.

Preparation and performance characteristics of an environmentally-friendly agglomerant to improve the dry dust removal effect for filter material

The incomplete and uneven dust removal of a pulse filter greatly reduces the dust removal efficiency, which affects the efficiency, service life, and running resistance of dust removers. Therefore, due to improve the pulse cleaning effect, an agglomerant developed by free radical polymerization was added during dust removal. The optimal process conditions were determined by measuring the viscosity, surface tension, and atomization effect of the agglomerant solution. The phases, chemical composition, surface morphology, and morphology of the agglomerant and coal dust were characterized by infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, and scanning electron microscopy. Molecular dynamics simulations were used to study the interaction mechanism between the agglomerant and coal dust. Finally, the dust removal performance under water mist conditions and agglomerate solution atomization was tested using a pulse filter. The results showed that a 0.3 % agglomerant solution effectively reduced the surface tension of the solution and displayed good wetting and bonding properties. Compared with water misting, the agglomerant solution subjected to an atomization rate of 2400 m³/h prolonged the filtration period, reduced the filtration resistance, and reduced the dust emission concentration. These results have important theoretical and practical significance for improving the dust removal effect of pulse filters.

Mechanical characteristics of orally disintegrating films: Comparison of folding endurance and tensile properties

The tensile test is the most widely used method for testing the mechanical characteristics of orally disintegrating films (ODFs). The other available test is the folding endurance (FE) test, which is more suitable for clarifying the actual strength during the manufacturing and dosing. However, the FE test is performed manually, and the FE number it generates has not been adequately analyzed as an index. The aim of this studies were to establish an automatic method for determining the FE number, and to compare the resulting FE numbers with the tensile properties. For this purpose, a desktop-model endurance test machine was used. First, the operating conditions-i.e., the folding angle, the folding speed and the weight requirement were optimized using ODF models. Secondly, the FE of ODFs prepared from three film formers (HPMC, HPC, and PVA) and with insoluble particles (calcium carbonate), plasticizers (glycerin) and APIs (acetaminophen), was evaluated and compared with the tensile properties. Lastly, the commercial ODFs were investigated. The results showed that our automatic system could be successfully used to determine the FE characteristics of ODFs. FE was suggested to relate to not only the strength but also the elongation during the tensile test.

Dataset on applying HPMC polymer to improve encapsulation efficiency and stability of the fish oil: In vitro evaluation

Data examines the effect of hydroxypropyl methylcellulose (HPMC) HPMC15 cP, and HPMC 5 cP polymer composition on the physicochemical traits of encapsulated oil made using lab scale spray drying (180 °C). The data found showed that the properties of the reconstituted fish oil powder are significantly affected by the polymer's composition and ratio (p < 0.05). In this experiment, powder with the particle sizes below 60 μm was produced and it was observed that HPMC is a good emulsifier for all formulations and the encapsulation efficiency is high with 75.21% for AF1 formulation. It was also observed that the process of fish oil encapsulation employed by HPMC 5 cP produce a more volatile oil powder, while encapsulation with HPMC 15 cP produced a more stable fish oil powder. These finding shows that the utilisation of HPMC as a polymer to encapsulate fish oil can produce a more efficient and stable compound.

Characterization of a novel hydroxypropyl methylcellulose (HPMC) direct compression grade excipient for pharmaceutical tablets

Controlled release tablets are important dosage forms enabling a slower release of the drug and better pharmacokinetics for some drugs and hydrophilic matrix tablets utilizing hydroxypropyl methylcellulose (HPMC) are one of the most common types. One of the main challenges with using HPMC is its poor flow when implemented in a direct compression process or when utilized for continuous manufacturing for which novel grades of direct compression have been developed. In this work, three different direct compression (DC) grades of HPMC (K4M, K15M and K100M) were characterized and compared to their standard grade (CR) counterparts. These materials were compared in terms of density, particle size, morphology, surface area and powder flow using multiple techniques. Results showed that the materials were almost identical in terms of particle shape and although the DC grades had better flow, the particle size was slightly smaller with an unexpectedly higher surface area, which most likely resulted from the inclusion of co-processed silicon dioxide in the DC grades. The bulk, tapped and true densities were slightly higher for all of the DC grades. Of the eleven different parameters used to characterize the flow of the materials the DC grades showed better flow than their standard CR counterparts for nine of the parameters (Carr's Index, Erweka flow, FT4 Flow Rate Index, Mean Avalanche Time, Avalanche Scatter, Number of Avalanches, Shear Cell Uni-axial Compressive Strength and Shear Cell Flow Function Coefficient). Only the FT4 Basic Flowability Energy and Specific Energy showed the opposite trend which can be explained from the testing methodology. It is recommended to evaluate the DC grades of HPMC for processes where better flowing material would have an advantage, such as direct compression, continuous manufacturing, and roller compaction if the powder flow into the rolls is problematic.

Erodible coatings based on HPMC and cellulase for oral time-controlled release of drugs

Oral drug delivery systems for time-controlled release, intended for chronotherapy or colon targeting, are often in the form of coated dosage forms provided with swellable/soluble hydrophilic polymer coatings. These are responsible for programmable lag phases prior to release, due to their progressive hydration in the biological fluids. When based on high-viscosity polymers and/or manufactured by press-coating, the performance of functional hydroxypropyl methylcellulose (HPMC) layers was not fully satisfactory. Particularly, it encompassed an initial phase of slow release because of outward diffusion of the drug through a persistent gel barrier surrounding the core. To promote erosion of such a barrier, the use of a cellulolytic product (Sternzym® C13030) was here explored. For this purpose, the mass loss behavior of tableted matrices based on various HPMC grades, containing increasing percentages of Sternzym® C13030, was preliminarily studied, highlighting a clear and concentration-dependent effect of the enzyme especially with high-viscosity polymers. Subsequently, Sternzym® C13030-containing systems, wherein the cellulolytic product was either incorporated into a high-viscosity HPMC coating or formed a separate underlying layer, were manufactured. Evaluated for release, such systems gave rise to more reproducible profiles, with shortened lag phases and reduced diffusional release, as compared to the reference formulation devoid of enzyme.

Effect of bovine bone collagen and nano-TiO2 on the properties of hydroxypropyl methylcellulose films

Hydroxypropyl methylcellulose (HPMC) film containing bovine bone collagen (BC) and nano-TiO2 were developed via casting method. The films were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), and their mechanical properties, barrier properties, thermal stability and surface color were investigated. The results showed that polymer matrices of HPMC and BC had good compatibility. The nano-TiO2 could be well embedded and dispersed in the matrix of HPMC/BC films, resulting in homogeneous, continuous and compact structure of the composite films. The addition of BC and nano-TiO2 significantly (p < .05) changed the surface color parameters of the films (p < .05). In addition, the introduction of BC and nano-TiO2 had a positive effect on the improvement of mechanical properties, barrier properties and thermal stability of the HPMC based films. The results suggest that HPMC based films containing BC and nano-TiO2 are more suitable for active packaging in the food industry.

Physical study of Chloramphenicol In Situ Gel with Base Hydroxypropyl Methylcellulose and Poloxamer 188

Objective

The aim of this study was to determine the best formulation of ophthalmic in situ gel preparation by two different bases, Poloxamer 188 and HPMC (hydroxypropyl methylcellulose), with physical evaluation, such as organoleptic, pH, viscosity, and gel capacity during 28 days of storage time.

Materials and Methods

The two different concentrations of the gel made by using Poloxamer 188 were F1 (5%) and F2 (10%), and those made by using HPMC were F3 (0.45%) and F4 (1%).

Results

The results of this study showed that formulation 1 (F1) was the optimum formulation, having pH 6.45, viscosity of 5.47 cP, and a better gel capacity than other formulas.

Conclusion

In situ gel for ophthalmic preparations is developed to mask the limitation of conventional forms of ophthalmic preparation. In situ gel technology significantly increase the effectivity of drugs in the raw material and drug bioavailability in new drug delivery systems based on in situ gel concept.

Evaluating supersaturation in vitro and predicting its performance in vivo with Biphasic gastrointestinal Simulator: A case study of a BCS IIB drug

This study aimed to develop an evaluation approach for supersaturation by employing an in vitro bio-mimicking apparatus designed to predict in vivo performance. The Biphasic Gastrointestinal Simulator (BGIS) is composed of three chambers with absorption phases that represent the stomach, duodenum, and jejunum, respectively. The concentration of apatinib in each chamber was detected by fiber optical probes in situ. The dissolution data and the pharmacokinetic data were correlated by Gastroplus^TM. The precipitates were characterized by polarizing microscope, Scanning Electron Microscopy, Powder X-ray diffraction and Differential scanning calorimetry. According to the results, Vinylpyrrolidone-vinyl acetate copolymer (CoPVP) prolonged supersaturation by improving solubility and inhibiting crystallization, while Hydroxypropyl methylcellulose (HPMC) prolonged supersaturation by inhibiting crystallization alone. Furthermore, a predictive in vitro-in vivo correlation was established, which confirmed the anti-precipitation effect of CoPVP and HPMC on in vitro performance and in vivo behavior. In conclusion, CoPVP and HPMC increased and prolonged the supersaturation of apatinib, and then improved its bioavailability. Moreover, BGIS was demonstrated to be a significant approach for simulating in vivo conditions for in vitro-in vivo correlation in a supersaturation study. This study presents a promising approach for evaluating supersaturation, screening precipitation inhibitors in vitro, and predicting their performances in vivo.

The effect of pH on the stabilization and digestive characteristics of soybean lipophilic protein oil-in-water emulsions with hypromellose

The development of functional foods requires a detailed understanding of the behavior of lipophilic protein (LP) in the presence of emulsion stabilizers at different pH conditions. In this study, we examined the interaction between hydroxypropyl methylcellulose (hypromellose, HPMC) and soybean lipophilic protein. To that end, we examined the stabilities of LP-HPMC emulsions at pH 3, 5, and 7, as well as the oil-release behavior of LP-HPMC emulsions during digestion. Fluorescence data showed that HPMC binds to LP with quenching at a single binding site that did not change with pH. Atomic-force microscopy, emulsification, and oxidation-stability analyses showed that HPMC improves the pH stability of the LP-HPMC emulsions, while simulated in-vitro digestion experiments showed that added HPMC delayed the release of lipids to varying degrees. The results of this study will aid in the development of emulsion-based functional foods, pharmaceutical carriers with controlled-release or sustained-release functional ingredients.

A Hydroxypropyl Methylcellulose-Based Solid Dispersion of Curcumin with Enhanced Bioavailability and its Hepatoprotective Activity

Curcumin is a polyphenol compound derived from the rhizomes of Curcuma longa that exhibits antioxidant, anti-inflammatory, anticancer, and antimicrobial properties. However, its low solubility in aqueous solutions, low absorption following oral administration, and rapid degradation limit its use as a functional food material. In this study, a hydroxypropyl methylcellulose-based solid dispersion of curcumin (DW-CUR 20) was prepared and its bioavailability was evaluated. In addition, its therapeutic efficacy as a hepatoprotective agent was investigated using the model of tert-butyl hydroperoxide (t-BHP)-induced hepatocyte damage. The rat plasma pharmacokinetic study showed that the oral curcumin bioavailability of DW-CUR 20 significantly increased compared to that of non-formulated curcumin. DW-CUR 20 showed a concentration-dependent hepatocyte protective effect on t-BHP-induced HepG2 cells. DW-CUR 20 inhibited the release of lactate dehydrogenase and decreased apoptosis-related proteins such as Poly (ADP-ribose) polymerase, cleaved caspase-7 and cleaved caspase-8 on t-BHP-treated HepG2 cells. These findings suggest that DW-CUR 20 could be a promising formulation for enhancing the therapeutic efficiency of curcumin and for improving the safety.

The effect of the source and the concentration of polymers on the release of chlorhexidine from mucoadhesive buccal tablets

In the current work, two groups of chlorhexidine mucoadhesive buccal tablets were prepared, using either rod or irregularly-shaped spherical particles of hydroxypropyl methylcellulose and different ratios of poloxamer 407 (P407). The tablets were designed to release the drug over two hours. Their physicochemical properties and drug release profiles were investigated. The impact on dry granulation, the ex-vivo mucoadhesion, the swelling index, the morphology of swollen tablets and the drug release kinetic were investigated. Drug-polymers chemical interaction was studied using Fourier Transforms Infrared Spectroscopy (FTIR) and differential scanning calorimetry (DSC). Due to different particle shapes, the preparation of dry granules required a 40 KN force for rod-shaped particles compared to 10 KN for the irregularly-shaped spherical particles. All formulations showed at least two-hours residence time using ex-vivo mucoadhesion. Statistically, there was no significant difference in the swelling index, drug release nor its kinetic for both groups. However, the microscopical morphology of the swollen tablet and the size of the pores were affected by particle shape. Increasing the ratio of P407 to 62.5% resulted in a pronounced increase in drug release from around 60% to >90% after two hours. Following the FTIR and DSC analyses, no chemical interaction was noted apart from the steric hindrance effect of P407, which was observed even with the physical mixtures.

Impact of capsule type on aerodynamic performance of inhalation products: A case study using a formoterol-lactose binary or ternary blend

The aerodynamic performance of a dry powder for inhalation depends on the formulation and the dry powder inhaler (DPI). In the case of capsule-based DPIs, the capsule also plays a role in the powder aerosolisation and the dispersion of the micronized drug during the inhalation. This study evaluated the impact of gelatine capsules (Quali-G™ and Hard Gelatine Capsules for DPIs), cold-gelled hypromellose (HPMC) capsules (Quali-V^®-I and Vcaps^®) and thermal-gelled HPMC capsules (Vcaps^®Plus) from Qualicaps^® and Capsugel^® respectively, on the delivered dose (DD), fine particle dose (FPD), and capsule retention for formoterol-lactose binary and ternary blends. This study used a low resistance Axahaler^® DPI based on the RS01 design (Plastiape, Italy). Similar trends were observed with the different capsule types that packaged both dry powder formulations. The highest DD and FPD and the lowest formoterol capsule retention were observed with cold-gelled HPMC capsules such as Quali-V-I^® and Vcaps^®, without significant differences between these capsules (p > 0.05, one-way ANOVA with Newman-Keuls post-hoc test) for both dry powders. Therefore, the capsule composition and manufacturing process have an influence on aerodynamic performance. In addition, the ternary blend showed higher DDs and FPDs but also higher capsule retention in comparison to the binary blend.

Application of hydroxypropyl methylcellulose as a protective agent against magnesium stearate induced crystallization of amorphous itraconazole

Itraconazole is a fungicide drug which has low bioavailability due to its poor water solubility. Amorphous solid dispersion (ASD) is a tool that has the potential to greatly increase the dissolution rate and extent of compounds. In this work, the dissolution of tablets containing the ASD of itraconazole with either hydroxypropyl methylcellulose (HPMC) or vinylpyrrolidone-vinyl acetate copolymer (PVPVA) was compared in order to find a formulation which can prevent the drug from the precipitation caused by magnesium stearate. Formulations containing the PVPVA-based ASD with HPMC included in various forms could reach 90% dissolution in 2 h, while HPMC-based ASDs could release 100% of the drug. However, HPMC-based ASD had remarkably poor grindability and low bulk density, which limited its processability and applicability. The latter issue could be resolved by roller compacting the ASD, which significantly increases the bulk density and the flowability of the powder blends used for tableting. This roller compaction step might be a base for the industrial application of HPMC-based, electrospun ASDs.

Hydroxypropyl methylcellulose-based controlled release dosage by melt extrusion and 3D printing: Structure and drug release correlation

The objective of this study was to develop a new approach for fabrication of zero order release of active pharmaceutical ingredients (APIs) using hot-melt extrusion (HME) and 3D printing technology to generate tablets with specific 3D structures. By correlating the geometry of the 3D printed tablets with their dissolution and drug release rates, mathematical models that have been developed to describe drug release mechanisms were also studied. Acetaminophen was used as a model drug, and Benecel™ hydroxypropyl methylcellulose (HPMC) E5 and Soluplus® were used to formulate nine fuse depositional 3D-printed tablets with different inner core fill densities and outside shell thicknesses. This work reports the successful fabrication of solid-dispersion filaments with an API dispersed in HPMC based matrix via HME technology, and the production of zero order controlled release tablets with different 3D structures (tablets #3, 5, 6, and 9) using a 3D printer.

HPMC granules by wet granulation process: Effect of vitamin load on physicochemical, mechanical and release properties

Due to its versatile properties, hydroxypropyl methylcellulose (HPMC) is largely used in many applications and deeply studied in the various fields such as pharmaceuticals, biomaterials, agriculture, food, water purification. In this work, vitamin B12 loaded HPMC granules were produced to investigate their potential application as nutraceutical products. To this aim the impact of vitamin load on physico-chemical, mechanical and release properties of granules, achieved by wet granulation process, was investigated. In particular, three different loads of B12 (1%, 2.3% and 5% w/w) were assayed. Unloaded granules (used as control) and loaded granules were dried, sieved, and then the suitable fraction for practical uses, 0.45-2mm in size, was fully characterized. Results showed that the vitamin incorporation of 5% reduced the granulation performance in the range size of 0.45-2mm and led granules with higher porosity, more rigid and less elastic structures compared to unloaded granules and those loaded at 1% and 2.3% of B12. Vitamin release kinetics of fresh and aged granules were roughly found the same trends for all the prepared lots; however, the vitamin B12 was released more slowly when added with a load at 1% w/w, suggesting a better incorporation.

Comparison of the clinical efficacy of preserved and preservative-free hydroxypropyl methylcellulose-dextran-containing eyedrops

PURPOSE

This study aimed to compare the efficacy of two sustained-release formulation of artificial tear drops.

PATIENTS AND METHODS

This is a randomized patient-masked clinical trial, a total 88 patients into two group A (n=41; with single dose of artificial tear, containing dextran 70, 1mg/ml and hypromellose, 3mg/ml hydroxypropyl methylcellulose (HPMC) and group B (n=47; with multidose of artificial tear, containing 0.3g HPMC and 0.1g of dextran 70, with 0.01% benzalkonium chloride (BAK) as preservative) were completed the study. The ocular surface disease index (OSDI) questionnaire, tear break up time (TBUT), corneal and conjunctival staining and Schirmer test, were performed. Repeated measures ANOVA was used to assess the differences among the two products. A p-value less than 0.05 was considered significant.

RESULTS

The mean of age of the participants in the Group A and B was 44.08±6.29 (range, 33-58 years) years and 45.83±8.42 (31-60 years), respectively. In comparing two groups before the intervention, the OSDI scores, the TBUT scores, the conjunctival and corneal staining scores and the Schirmer scores did not show statistically significant differences (p=0.339, p=0.640, p=0.334, p=0.807 and p=0.676, respectively). After 4 weeks, the OSDI scores, conjunctival and corneal staining scores showed improvement in compare to those before the intervention (p<0.001). But, the differences for the Schirmer test score and TBUT score was not significant (p=0.115, p=0.013, respectively).

CONCLUSION

Our outcomes indicated that improvement occurred with use of both products but there was no statistically significant difference between them.

The effect of HPMC and MC as pore formers on the rheology of the implant microenvironment and the drug release in vitro

Porous implants or implantable scaffolds used for tissue regeneration can encourage tissue growth inside the implant and provide extended drug release. Water-soluble polymers incorporated into a biodegradable or inert implant matrix may leach out upon contact with biological fluids and thereby gradually increasing the porosity of the implant and simultaneously release drug from the implant matrix. Different molecular weight grades of methylcellulose (MC) and hydroxypropyl methylcellulose (HPMC) were mixed with polylactide and extruded into model implants containing nitrofurantoin as a model drug. The effect of the leached pore formers on the implant porosity and the rheology of the implant microenvironment in vitro was investigated and it was shown that HPMC pore formers had the greatest effect on the surrounding viscosity, with higher drug release and pore forming ability as compared to the MC pore formers. The highest molecular weight HPMC led to the most significant increase in viscosity of the implant microenvironment, while the highest drug release was achieved with the lowest molecular weight HPMC. The data suggested that the microenvironmental rheology of the implant, both in the formed pores and in biological fluids in the immediate vicinity of the implant could be an important factor affecting the diffusion of the drug and other molecules in the implantation site.

Intraocular lens implantation without the use of ophthalmic viscosurgical device

The purpose of this study was to determine whether single-piece hydrophilic acrylic intraocular lens can be safely implanted without the use of ophthalmic viscosurgical devices. This retrospective study comprised 100 eyes having phacoemulsification and intraocular lens implantation without the use of ophthalmic viscosurgical device. 80 eyes with the use of a viscosurgical device are used as control group. In this intraocular lens implantation technique, the anterior chamber was maintained with an irrigation cannula and intraocular lens was implanted with a lens injector. Visual acuity, corneal clarity and edema, intraocular pressure, and corneal endothelial cell count were evaluated preoperatively and postoperatively at days 1, 7, and 30. Corneal endothelial cell count was repeated 2 weeks after surgery. Complications of this technique were also evaluated. No significant complications of this intraocular lens implantation technique, such as posterior capsule rupture, intraocular lens buttonholing, zonular dialysis, Descemet's tear/detachment, occurred. On the seventh postoperative day, 90 % of eyes achieved 20/20 or better vision. There was no difference in corneal endothelial cell loss between viscoelastic device-used and not-used cases (p = 0.356). When implanting intraocular lens without the use of ophthalmic viscosurgical device, significant intraoperative complications did not occur. The possible advantages are shortened surgery time, avoidance of postoperative IOP spike from ocular viscosurgical device (OVD) remnant, and reduced cost.