Poly(vinyl pyrrolidone) sub-microfibers produced by solution blow spinning

Natamycin-Loaded Ethyl Cellulose/PVP Films Developed by Microfluidic Spinning for Active Packaging

The preparation of active packaging loaded with antimicrobial, antioxidant, and other functional agents has become a hot topic for food preservation in recent years. In this field, active fiber films based on spinning methods have attracted the interest of researchers owing to their high specific surface area, high porosity, high loading capacity, and good controlled release capacity. In the present work, neatly arranged ethyl cellulose (EC)/polyvinyl-pyrrolidone (PVP) fibrous films loaded with natamycin as an antimicrobial agent were prepared by microfluidic spinning. The encapsulation efficiency of natamycin was more than 90% in each group and the loading increased with increasing natamycin content. According to the characterization results of the natamycin-loaded EC/PVP fibrous films, hydrogen bonding was formed between natamycin and EC and PVP in the fibrous films. Meanwhile, the water contact angle of the fibrous films was increased, suggesting the improved hydrophobicity of the films. In the in vitro bacterial inhibition experiments, the active fiber films loaded with natamycin showed good antimicrobial activity, which could significantly inhibit the growth of gray mold. In conclusion, N-EC/PVP fibrous films with antimicrobial activity prepared by microfluidic spinning showed good potential in the field of active packaging.

Solvent modulation in peptide sub-microfibers obtained by solution blow spinning

Peptides possess high chemical diversity at the amino acid sequence level, which further translates into versatile functions. Peptides with self-assembling properties can be processed into diverse formats giving rise to bio-based materials. Peptide-based spun fibers are an interesting format due to high surface-area and versatility, though the field is still in its infancy due to the challenges in applying the synthetic polymer spinning processes to protein fibers to peptides. In this work we show the use of solution blow-spinning to produce peptide fibers. Peptide fiber formation was assisted by the polymer poly (vinyl pyrrolidone) (PVP) in two solvent conditions. Peptide miscibility and further self-assembling propensity in the solvents played a major role in fiber formation. When employing acetic acid as solvent, peptide fibers (0.5 μm) are formed around PVP fibers (0.75 μm), whereas in isopropanol only one type of fibers are formed, consisting of mixed peptide and PVP (1 μm). This report highlights solvent modulation as a mean to obtain different peptide sub-microfibers via a single injection nozzle in solution blow spinning. We anticipate this strategy to be applied to other small peptides with self-assembly propensity to obtain multi-functional proteinaceous fibers.

Preparation and Phytotoxicity Evaluation of Cellulose Acetate Nanoparticles

The use of biocompatible and low-cost polymeric matrices to produce non-phytotoxic nanoparticles for delivery systems is a promising alternative for good practices in agriculture management and biotechnological applications. In this context, there is still a lack of studies devoted to producing low-cost polymeric nanoparticles that exhibit non-phytotoxic properties. Among the different polymeric matrices that can be used to produce low-cost nanoparticles, we can highlight the potential application of cellulose acetate, a natural biopolymer with biocompatible and biodegradable properties, which has already been used as fibers, membranes, and films in different agricultural and biotechnological applications. Here, we provided a simple and low-cost route to produce cellulose acetate nanoparticles (CA-NPs), by modified emulsification solvent evaporation technique, with a main diameter of around 200 nm and a spherical and smooth morphology for potential use as agrochemical nanocarriers. The non-phytotoxic properties of the produced cellulose acetate nanoparticles were proved by performing a plant toxic test by Allium cepa assay. The cytotoxicity and genotoxicity tests allowed us to evaluate the mitotic process, chromosomal abnormalities, inhibition/delay in root growth, and micronucleus induction. In summary, the results demonstrated that CA-NPs did not induce phytotoxic, cytotoxic, or genotoxic effects, and they did not promote changes in the root elongation, germination or in the mitotic, chromosomal aberration, and micronucleus indices. Consequently, the present findings indicated that CA-NPs can be potentially used as environmentally friendly nanoparticles.

Preparation of mango peel-waste pectin-based nanofibers by solution blow spinning (SBS)

An essential prerequisite for successful solution blow spinning (SBS) is the presence of effective molecular entanglements of polymers in the solution. However, the fabrication of biopolymer fibers is not as straightforward as synthetic polymers. Particularly for biopolymers such as pectin, molecular entanglements are essential but insufficient for successful spinning through the SBS production method. Such a challenge is due to the biopolymer's complex nature. However, incorporating an easily spinnable polymer precursor, such as polyacrylonitrile (PAN), to pectin effectively enabled the production of fibers from the SBS process. In this process, PAN-assisted pectin nanofibers are produced with average diameters ranging from 410.75 ± 3.73 to 477.09 ± 6.60 nm using a feed flow rate of 5 ml h^-1, air pressure of 3 bars, syringe tip to collector distance at 30 cm, and spinning time of 10 min. PAN in DMSO solvent at different volume ratios (i.e. 35%-55% v/v) was critical in assisting pectin to produce nanofibers. The addition of a high molecular weight polymer, PAN, to pectin also improved the viscoelasticity of the solution, eventually contributing to its successful SBS process. Furthermore, the composite SBS-spun fibers obtained suggest that its formation is concentration-dependent.

Facile microfluidic fabrication and characterization of ethyl cellulose/PVP films with neatly arranged fibers

Much attention and endeavor have been paid to developing biocompatible food packaging films. Here, ethyl cellulose (EC) and polyvinylpyrrolidone (PVP) were fabricated into films through a facile method, microfluidic spinning. Morphology observations showed that the fibers were neatly arranged with an average diameter of 1-4 μm. FTIR and X-ray diffraction analysis suggested the existence of good compatibility and interaction between EC and PVP. Thermogravimetric analysis demonstrated that PVP ameliorates the thermal properties; moreover, the tensile properties were improved, with tensile strength (TS) and Young's modulus up to 11.10 ± 1.04 MPa and 350.16 ± 45.46 MPa, respectively. The optimal formula was EC/PVP (2:3), of which the film displayed an enhanced TS of 4.61 ± 1.15 MPa and a modified water contact angle of 61.8 ± 4.4°, showing fine tensile and hydrophilic performance. This study provides a facile and green film fabrication method promising to be used for food wrapping.

PVDF/KNO3 Composite Sub-Microfibers Produced by Solution Blow Spinning as a Hydrophobic Matrix for Fertilizer Delivery System

Nutrient supplementation is a common practice in agriculture to increase crop productivity in the field. This supplementation is usually excessive, causing nutrient leaching in periods of rainfall leading to environmental problems. To overcome such issues, many studies have been devoted to developing polymeric matrices for the controlled and continuous release of nutrients, reducing losses, and keeping plants nourished for as long as possible. However, the release mechanism of these matrices is based on water diffusion. They start immediately for swellable polymeric matrices, which is not interesting and also may cause some waste, because the plant only needs nutrition only after the germination process. Here, as proof of concept, we tested a hydrophobic polymeric matrix based on sub-microfibers mats, produced by solution blow spinning, filled with potassium nitrate (KNO₃) for the controlled release of nutrients to plants. In this work, we used the polyvinylidene fluoride (PVDF) polymer to produce composite nanofibers containing pure potassium nitrate in the proportion of 10% weight. PVDF/KNO sub-microfibers mats were obtained with 370 nm average diameter and high occurrence of beads. We performed a release test using PVDF/KNO₃ mats in a water bath. The release kinetic tests showed an anomalous delivery mechanism, but the composite polymeric fibrous mat showed itself to be a promising alternative to delay the nutrient delivery for the plants.