Surface-attached dual-functional hydrogel for controlled cell adhesion based on poly(N,N-dimethylacrylamide)

Photo-crosslinked chitosan-gelatin xerogel-like coating onto "cold" plasma functionalized poly(lactic acid) film as cell culture support

This paper reports on biofunctionalisation of a poly(lactic acid) (PLA) film by surface activation through cold plasma treatment followed by coating with a chitosan-gelatin xerogel. The UV cross-linking of the xerogel precursor was simultaneously performed with the fixation onto the PLA support. This has a strong effect on surface properties, in terms of wettability, surface free energy, morphology and micromechanical features. The hydrophilic - hydrophobic character of the surface, determined by contact angle measurements, was tuned along the process, passing from moderate hydrophobic PLA to enhanced hydrophilic plasma activated surface, which favors coating adhesion, then to moderate hydrophobic chitosan-gelatin coating. The coating has a Lewis amphoteric surface, with a porous xerogel-like morphology, as revealed by scanning electron microscopy images. By riboflavin mediated UV cross-linking the chitosan-gelatin coating becomes high adhesive and with a more pronounced plasticity, as shown by AFM force-distance spectroscopy. Thus prepared surface-coated PLA supports were successfully tested for growth of dermal fibroblasts, which are known for their induction potential of chondrogenic cells, which is very important in cartilage tissue engineering.

Steps Toward Recapitulating Endothelium: A Perspective on the Next Generation of Hemocompatible Coatings

Endothelium, the lining in this blood vessel, orchestrates three main critical functions such as protecting blood components, modulating of hemostasis by secreting various inhibitors, and directing clot digestion (fibrinolysis) by activating tissue plasminogen activator. No other surface can perform these tasks; thus, the contact of blood and blood-contacting medical devices inevitably leads to the activation of coagulation, often causing device failure, and thromboembolic complications. This perspective, first, discusses the biological mechanisms of activation of coagulation and highlights the efforts of advanced coatings to recapitulate one characteristic of endothelium, hereafter single functions of endothelium and noting necessity of the synergistic integration of its three main functions. Subsequently, it is emphasized that to overcome the challenges of blood compatibility an endothelium-mimicking system is needed, proposing a synergy of bottom-up synthetic biology, particularly synthetic cells, with passive- and bioactive surface coatings. Such integration holds promise for developing advanced biomaterials capable of recapitulating endothelial functions, thereby enhancing the hemocompatibility and performance of blood-contacting medical devices.

Green Solvent-Based Antifouling Polymer Brushes Demonstrate Excellent Hemocompatibility

Medical devices are crucial for patient care, yet even the best biomaterials lead to infections and unwanted activation of blood coagulation, potentially being life-threatening. While hydrophilic polymer brushes are the best coatings to mitigate these issues, their reliance on fossil raw materials underscores the urgency of bio-based alternatives. In this work, we introduce polymer brushes of a green solvent-based monomer, prohibiting protein adsorption, bacterial colonization, and blood clot formation at the same level as fossil-based polymer brushes. The polymer brushes are composed of N,N-dimethyl lactamide acrylate (DMLA), can be polymerized in a controlled manner, and show strong hydrophilicity as determined by thermodynamic analysis of the surface tension components. The contact of various challenging protein solutions results in repellency on the poly(DMLA) brushes. Furthermore, the poly(DMLA) brushes completely prevent the adhesion and colonization of Escherichia coli. Remarkably, upon blood contact, the poly(DMLA) brushes successfully prevent the formation of a fibrin network and leukocyte adhesion on the surface. While showcasing excellent antifouling properties similar to those of N-hydroxypropyl methacrylamide (HPMA) polymer brushes as one of the best antifouling coatings, the absence of hydroxyl groups prevents activation of the complement system in blood. We envision the polymer brushes to contribute to the future of hemocompatible coatings.

Selection of natural biomaterials for micro-tissue and organ-on-chip models

The desired organ in micro-tissue models of organ-on-a-chip (OoC) devices dictates the optimum biomaterials, divided into natural and synthetic biomaterials. They can resemble biological tissues' biological functions and architectures by constructing bioactivity of macromolecules, cells, nanoparticles, and other biological agents. The inclusion of such components in OoCs allows them having biological processes, such as basic biorecognition, enzymatic cleavage, and regulated drug release. In this report, we review natural-based biomaterials that are used in OoCs and their main characteristics. We address the preparation, modification, and characterization methods of natural-based biomaterials and summarize recent reports on their applications in the design and fabrication of micro-tissue models. This article will help bioengineers select the proper biomaterials based on developing new technologies to meet clinical expectations and improve patient outcomes fusing disease modeling.

Brush-Like Interface on Surface-Attached Hydrogels Repels Proteins and Bacteria

Interfacing artificial materials with biological tissues remains a challenge. The direct contact of their surface with the biological milieu results in multiscale interactions, in which biomacromolecules adsorb and act as transducers mediating the interactions with cells and tissues. So far, only antifouling polymer brushes have been able to conceal the surface of synthetic materials. However, their complex synthesis has precluded their translation to applications. Here, we show that ultra-thin surface-attached hydrogel coatings of N-(2-hydroxypropyl) methacrylamide (HPMA) and carboxybetaine methacrylamide (CBMAA) provided the same level of protection as brushes. In spite of being readily applicable, these coatings prevented the fouling from whole blood plasma and provided a barrier to the adhesion of Gram positive and negative bacteria. The analysis of the components of the surface free energy and nanoindentation experiments revealed that the excellent antifouling properties stem from the strong surface hydrophilicity and the presence of a brush-like structure at the water interface. Moreover, these coatings could be functionalized to achieve antimicrobial activity while remaining stealth and non-cytotoxic to eukaryotic cells. Such level of performance was previously only achieved with brushes. Thus, we anticipate that this readily applicable strategy is a promising route to enhance the biocompatibility of real biomedical devices. This article is protected by copyright. All rights reserved.

"CHicable" and "Clickable" Copolymers for Network Formation and Surface Modification

In this study, we present the generation of novel, multifunctional polymer networks through a combination of C,H-insertion cross-linking (CHic) and click chemistry. To this, copolymers consisting of hydrophilic N,N-dimethylacrylamide as matrix component and repeat units containing azide moieties, as well as benzophenone or anthraquinone groups, are generated. The benzophenone or anthraquinone groups allow photo-cross-linking, surface attachment or covalent immobilization of adjacent (bio)molecules through CHic reactions. The azide moieties either can react with available alkynes through conventional click reactions or can be activated to form nitrenes, which can also undergo CHic reactions. By choosing appropriate reaction conditions, the same polymer can be used to follow very different reaction paths, opening up a plethora of choices for the generation of functional polymer networks. In the exemplary presented case ("CHic-Click"), irradiation of the copolymers with UV-A light (λ_irr = 365 nm) leads to cross-linking (network formation) and surface attachment simultaneously. The azide units remain intact during this cross-linking step, and alkyne-modified (bio)molecules can be bound through click reactions. Biofunctionalization of the polymer network with alkynylated streptavidin, followed by application of biotin-conjugated antibody and a model analyte, highlights the potential of these surface architectures as a toolbox which can be adapted for diverse bioanalytical applications.

Macroscopic Self-Assembly of Gel-Based Microfibers toward Functional Nonwoven Fabrics

Macroscopic self-assembly has increasingly attracted numerous concerns because of the facile fabrication of complex structures and diversified morphologies. Key challenges still remain to design high-performance building blocks to increase the efficiency and diversity of macroscopic self-assembly. Here, we designed triple noncovalent interactions (carboxyl-Zn²⁺ coordination, host-guest interactions, and hydrogen bonding interactions) to enhance the interactions between self-healing fibers, constructing multidimensional nonwoven fiber-based fabrics through macroscopic self-assembly without further postprocessing. Profiled from the strong interactions generated from triple noncovalent interactions, ordered two-dimensional plane and three-dimensional spiral gel fabrics were fabricated using polyvinyl pyrrolidone/gel-based fibers as building blocks toward a human motion sensor. Moreover, we demonstrated that the macroscopic self-assembly strategy is universal to construct three-dimensional film-based fabrics toward wound dressing based on the triple noncovalent interactions between two-dimensional films. This macroscopic self-assembly approach provides an alternative strategy to fabricate gel fabrics for various applications.

Perfluoropolyether-benzophenone as a highly durable, broadband anti-reflection, and anti-contamination coating

Anti-reflection and anti-contamination coatings prepared from fluorinated polymers have widespread and important applications, ranging from protective films for corrosion resistance to high-tech microelectronics and medical devices due to their transparency, low refractive index, stain resistance, and antifouling properties. However, the application of existing coatings is hindered by low surface adhesion to the target substrate and weakness when exposed to mechanical stress or damage, resulting in significant limitations to their practical applications. Herein, we incorporate perfluoropolyether (PFPE) with benzophenone (BP) to develop an efficient coating material (PFPE-BP) possessing broadband anti-reflectivity, anti-contamination properties, excellent abrasion resistance, and stability under elevated temperatures and relative humidity. The presence of BP allows the coating materials to be homogeneously mixed with a commercial hard coating solution to uniformly coat the target substrate. Furthermore, UV light irradiation on the coating surface results in excellent adhesion between BP groups of PFPE-BP and the hard coating matrix.

Tri-functional platform for the facile construction of dual-functional surfaces via a one-pot strategy

The scope of simultaneously introducing two new functionalities into the same polymeric substrate is largely limited to facile grafting approaches. Here, we designed a novel tri-functional platform and facilely constructed dual-functional surfaces in one pot by combining the "sulfur(vi)-fluoride exchange" (SuFEx) click reaction, photoinitiated polymerization and benzophenone photochemistry.

Self-healing conductive hydrogels: preparation, properties and applications

Conductive hydrogels have generated great interest in biomedical and electrical fields. However, conventional conductive hydrogels usually lack self-healing properties, which might be unfavorable for their application. Conductive self-healing hydrogels with excellent performance for applications in the biomedical and electrical fields are growing in number. In this review paper, the progress related to conductive self-healing hydrogels is summarized. The self-healing mechanism is classified to demonstrate the design and synthesis of conductive self-healing hydrogels and their applications in tissue engineering, wound healing, electronic skin, sensors and self-repaired circuits are presented and discussed. The future development of conductive self-healing hydrogels and problems that need to be solved are also described.