Spectroscopic determination of U(VI) species sorbed by the Chlorella (Chlorella pyrenoidosa) fresh water algae

Synthesis of Pillar[5]arene- and Phosphazene-Linked Porous Organic Polymers for Highly Efficient Adsorption of Uranium

It is crucial to design efficient adsorbents for uranium from natural seawater with wide adaptability, effectiveness, and environmental safety. Porous organic polymers (POPs) provide superb tunable porosity and stability among developed porous materials. In this work, two new POPs, i.e., HCCP-P5-1 and HCCP-P5-2 were rationally designed and constructed by linked with macrocyclic pillar[5]arene as the monomer and hexachlorophosphate as the core via a macrocycle-to-framework strategy. Both pillar[5]arene-containing POPs exhibited high uranium adsorption capacity compared with previously reported macrocycle-free counterparts. The isothermal adsorption curves and kinetic studies showed that the adsorption of POPs on uranium was consistent with the Langmuir model and the pseudo-second-order kinetic model. Especially, HCCP-P5-1 has reached 537.81 mg/g, which is greater than most POPs that have been reported. Meanwhile, the comparison between both HCCP-P5-1 and HCCP-P5-2 can illustrate that the adsorption capacity and stability could be adjusted by the monomer ratio. This work provides a new idea for the design and construction of uranium adsorbents from macrocycle-derived POPs.

Antioxidative Effect of Chlorella Pyrenoidosa Protein Hydrolysates and Their Application in Krill Oil-in-Water Emulsions

Chlorella pyrenoidosa is an excellent source of protein, and in this research, we assessed the antioxidant and emulsifying effects of Chlorella protein hydrolysate (CPH) using neutral proteases and alkaline proteases, as well as the properties of CPH-derived krill oil-in-water (O/W) emulsions. The CPHs exhibited the ability to scavenge several kinds of free radicals, including 1,1-diphenyl-2-picrylhydrazyl (DPPH), O2−, hydroxyl, and ABTS. Additionally, the CPHs (5 mg/mL) scavenged approximately 100% of the DPPH and ABTS. The CPHs showed similar emulsifying activities to Tween 20 and excellent foaming activities (max FS 74%), which helped to stabilize the krill oil-in-water emulsion. Less than 10 mg/mL CPHs was able to form fresh krill oil-in-water emulsions; moreover, the CPHs (5 mg/mL) in a krill O/W emulsion were homogenous, opaque, and stable for at least 30 days. Based on their inhibitory effects on the peroxide value (POV) and thiobarbituric acid reactive substances (TRABS), the CPHs were found to be able to inhibit lipid oxidation in both emulsifying systems and krill O/W emulsions. Thus, the CPHs could improve superoxide dismutase (SOD) activities by 5- or 10-fold and decrease the high reactive oxygen species (ROS) level caused by the addition of H2O2 in vitro. In conclusion, health-promoting CPHs could be applied in krill oil-in-water emulsions as both emulsifiers and antioxidants, which could help to improve the oxidative and physical stability of emulsions.

A novel freeze-dried natural microalga powder for highly efficient removal of uranium from wastewater

It is of great significance to develop convenient methods and low-cost materials to remove uranium from wastewater. Ankistrodesmus sp., an easy growing green alga, was employed for highly efficient removal of uranium from aqueous solution. The biosorption results under different experimental condition indicate that the alga possess outstanding uranium adsorption ability (q_max = 601.2 mg g^-1). Moreover, Ankistrodesmus sp. could be effectively regenerated with hydrochloric acid solution (0.1 M) and used again for uranium adsorption. Even in simulated mine water with various coexisting ions, Ankistrodesmus sp. also exhibits high removal efficiency (95.6%) towards uranium. Furthermore, the adsorption behavior of uranium by alga could be described in the Freundlich isotherms model and the adsorption process was consistent with the pseudo-second-order kinetics model. The characteristic of Fourier transform infrared spectrum, scanning electron microscopy, transmission electron microscope and X-ray photoelectron spectroscopy reveal that -NH₂, -COOH, -CONH₂ and C-O groups have participated in biosorption process. Therefore, complexation, electrostatic adsorption and ions exchange are the dominated action of uranium biosorption in the algae. All findings in this work suggest that Ankistrodesmus sp. can be a promising candidate for the effective and practical application in field of disposed uranium contamination.

Determination of Cu, Ni, Mn and Zn in diesel oil samples using energy dispersive X-ray fluorescence spectrometry after solid phase extraction using sisal fiber

As a natural adsorbent, sisal (agave sisalana) fibers were used to extract Cu, Ni, Mn, and Zn from diesel oil samples for posterior determination (i.e., direct analytical measurements on the solid support) of the analytes by energy dispersive X-ray fluorescence spectrometry (EDXRF). In the proposed procedure, 0.2 g of sisal fiber was directly added to 5.0 mL of diesel oil contained in a glass tube. After 5 min of contact time, the mixture was filtered, and the collected fibers were oven-dried for 30 min at 70 °C. After drying, the analytes were quantified directly by EDXRF using the sisal fibers as a solid support. The calibration curves showed linear concentration ranges of 0.09-1.00, 0.12-1.00, 0.09-1.00, 0.06-1.0 μg g^-1 for Cu, Ni, Mn, and Zn, respectively. The limits of detection (LOD) for Cu, Ni, Mn, and Zn were 0.03, 0.04, 0.03, and 0.02 μg g^-1, respectively. The repeatability, evaluated by performing ten measurements at a concentration of 0.50 μg g^-1 for each metal, with the results expressed in terms of the relative standard deviation (RSD), was 3.2, 6.5, 6.8, and 6.1% for Cu, Ni, Mn, and Zn, respectively. The results obtained by the proposed method were compared with the results obtained by a comparative method using inductively coupled plasma optical emission spectrometry, and both results showed good agreement. The proposed method was applied for Ni, Cu, Mn, and Zn determination in diesel oil samples collected from different gas stations.

Uranium biosorption from aqueous solution onto Eichhornia crassipes

Batch experiments were conducted to investigate the biosorption of U(VI) from aqueous solutions onto the nonliving biomass of an aquatic macrophyte Eichhornia crassipes. The results showed that the adsorption of U(VI) onto E. crassipes was highly pH-dependent and the best pH for U(VI) removal was 5.5. U(VI) adsorption proceeded rapidly with an equilibrium time of 30 min and conformed to pseudo-second-order kinetics. The Langmuir isotherm model was determined to best describe U(VI) biosorption with a maximum monolayer adsorption capacity of 142.85 mg/g. Thermodynamic calculation results indicated that the U(VI) biosorption process was spontaneous and endothermic. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis implied that the functional groups (amino, hydroxyl, and carboxyl) may be responsible for the U(VI) adsorption process, in which the coordination and ion exchange mechanisms could be involved. We conclude that E. crassipes biomass is a promising biosorbent for the removal of uranium pollutants.

Ammonium molybdate phosphate functionalized silicon dioxide impregnated in calcium alginate for highly efficient removal of 137Cs from aquatic bodies

Development of new hybrid material (SiO₂-AMP–Ca-Alg beads) for cesium uptake without disturbing the water quality parameters.

Study of polyethyleneimine- and amidoxime-functionalized hybrid biomass of Spirulina (Arthrospira) platensis for adsorption of uranium (VI) ion

This study investigates the potential application of the polyethyleneimine- (PEI) and amidoxime-modified Spirulina (Arthrospira) platensis biomasses for the removal of uranium ion in batch mode using the native biomass as a control system. The uranium ion adsorption was also characterized by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectra, zeta potential analysis, and surface area measurement studies. The effects of pH, biomass amount, contact time, initial uranium ion concentration, and ionic strength were evaluated by using native and modified algal biomass preparations. The uranium ion removal was rapid, with more than 70% of total adsorption taking place in 40 min, and equilibrium was established within 60 min. From the experimental data, it was found that the amount of adsorption uranium ion on the algal preparations decreased in the following series: amidoxime-modified algal biomass > PEI-modified algal biomass > native algal biomass. Maximum adsorption capacities of amidoxime- and PEI-modified, and native algal biomasses were found to be 366.8, 279.5, and 194.6 mg/g, respectively, in batchwise studies. The adsorption rate of U(VI) ion by amidoxime-modified algal biomass was higher than those of the native and PEI-modified counterparts. The adsorption processes on all the algal biomass preparations followed by the Dubinin-Radushkevitch (D-R) and Temkin isotherms and pseudo-second-order kinetic models. The thermodynamic parameters were determined at four different temperatures (i.e., 15, 25, 35, and 45 °C) using the thermodynamics constant of the Temkin isotherm model. The ΔH° and ΔG° values of U(VI) ion adsorption on algal preparations show endothermic heat of adsorption; higher temperatures favor the process. The native and modified algal biomass preparations were regenerated using 10 mM HNO3. These results show that amidoxime-modified algal biomass can be a potential candidate for effective removal of U(VI) ion from aqueous solution.