Cost effective separation of uranium ion using exhausted household products and natural bio-sorbent

Carbonate treated coffee powder (CTCP) for selective sorption of Pu4+ over Am3+, Np4+, NpO22+, and PuO22+ from aqueous acidic solution: Investigation on mechanism, kinetics, thermodynamics, stripping and radiolytic stability

An attempt was made for understanding the sorption behaviour of different actinide ions Pu⁴⁺, PuO₂²⁺, Am³⁺, Np⁴⁺, and NpO₂²⁺ on carbonate treated exhausted coffee powder (CTCP). Very efficient sorption of Pu⁴⁺ over other actinide ions from aqueous acidic medium was observed. Almost 4 h were required for achieving equilibrium. Experimental results for Pu⁺⁴ were fitted into different sorption isotherm model: Langmuir isotherm, Freundlich isotherm, D.R, isotherm and Temkin isotherm. Based on the linear regression, it was found that, Freundlich isotherm was predominantly operative. Pseudo 2nd order kinetics was found to be effective for the sorption of Pu⁺⁴. More than 80 % of loaded Pu⁴⁺ was found to desorb by 0.25 M oxalic acid solution. CTCP exhibited relatively good radiation stability. Sorption of Pu⁺⁴ on CTCP was exothermic, and spontaneous in nature. The sorption process was simple, cost effective and environmentally benign, as it did not involve any sophisticated, multi-step, sorbent synthesis.

Application of 3D magnetic nanocomposites: MXene-supported Fe3O4@CS nanospheres for highly efficient adsorption and separation of dyes

Due to the presence of several hydroxyl and amino groups on the surface, chitosan (CS) has been reported to be a potential candidate to solve the pollution caused by dyes in different industrial wastewater. However, it is associated with the recycling issues. Nano-Fe₃O₄ has the advantages of easy magnetic separation and surface functionalization, which can improve the efficiency as well as selectivity of separation. However, its tendency for agglomeration can reduce the adsorption capacity. MXene can provide suitable support for both CS and Fe₃O₄ to construct new MXene@Fe₃O₄@CS composites. In this study, MXene@Fe₃O₄@CSmagnetic nanosphere was synthesized by ultrasonic self-assembly to remove Congo red (CR). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier Transform Infrared (FT-IR) spectroscopy were employed to characterize the nanocomposites. According to the batch experiments, the adsorption kinetics were found to predominantly follow quasi-secondary rate kinetics. The adsorption followed Langmuir isotherm model. The adsorption process was found to be endothermic, entropy-driven, and thermodynamically spontaneous process. The adsorption capacity for CR was estimated as 620.22 mg·g^-1.

Application of hybrid MOF composite in extraction of f-block elements: Experimental and computational investigation

An attempt was made to understand the sorption behaviour of UO₂²⁺, Th⁴⁺ and Eu³⁺ on novel hybrid metal-organic framework composites, FeBDC@CoBDC. The XRD pattern revealed the composite nature of the hybrid MOF materials, while FTIR and Raman spectroscopic analyses evidenced the presence of different functional moieties. The thermal stability of the hybrid MOF composites was investigated through thermogravimetric analysis. The sorption predominantly followed Langmuir isotherm with sorption capacity of 189 mg g^-1, 224 mg g^-1 and 205 mg g^-1 for UO₂²⁺, Th⁴⁺ and Eu³⁺ respectively. The sorption proceeded through chemisorption following pseudo 2^nd order rate kinetics. The processes were found to be thermodynamically favourable and endothermic in nature. However, they were entropically driven. Multiple contacts of complexing agents were necessary for quantitative elution of f-elements from loaded MOF. The MOF showed moderate stability towards radiation exposure. DFT calculation was used for the optimization of structures, estimation of bond length and estimation of binding energy. In hybrid MOF composites, the Fe atom was having six coordination with 4 O atoms of BDC moieties and 2 O atoms of -OH groups. The O atoms of BDC and -OH groups were coordinated to Eu, Th and U atoms during their sorption.