Structural properties and adsorption performance relationship towards three categories of lignin and their derived biochar

The growing interest in utilizing lignin for dye removal has gained momentum, but there is limited information on the intricate relationship between lignin structural characteristics and adsorption efficacy, especially for its biochar derivatives. This study focused on three types of lignin and their corresponding biochar derivatives. Among them, ZnCl2-activated acidic/alkali densified lignin preparation of lignin-derived active carbon exhibited superior adsorption performance, achieving 526.32 mg/g for methylene blue and 2156.77 mg/g for congo red. Its exceptional adsorption capacity was attributed to its unique structural properties, including low alkyl and O-alkyl group content and high aromatic carbon levels. Furthermore, the adsorption mechanisms adhered to pseudo-second-order kinetics and the Langmuir model, signifying a spontaneous process. Intriguingly, lignin-derived active carbon also demonstrated remarkable recovery capabilities. These findings provide valuable insights into the impact of structural attributes on lignin and its biochar's adsorption performance.

Optimization of hydrothermal synthesis conditions of Bidens pilosa-derived NiFe2O4@AC for dye adsorption using response surface methodology and Box-Behnken design

The presence of stable and hazardous organic dyes in industrial effluents poses significant risks to both public health and the environment. Activated carbons and biochars are widely used adsorbents for removal of these pollutants, but they often have several disadvantages such as poor recoverability and inseparability from water in the post-adsorption process. Incorporating a magnetic component into activated carbons can address these drawbacks. This study aims to optimizing the production of NiFe2O4-loaded activated carbon (NiFe2O4@AC) derived from a Bidens pilosa biomass source through a hydrothermal method for the adsorption of Rhodamine B (RhB), methyl orange (MO), and methyl red (MR) dyes. Response surface methodology (RSM) and Box-Behnken design (BBD) were applied to analyze the key synthesis factors such as NiFe2O4 loading percentage (10-50%), hydrothermal temperature (120-180 °C), and reaction time (6-18 h). The optimized condition was found at a NiFe2O4 loading of 19.93%, a temperature of 135.55 °C, and a reaction time of 16.54 h. The optimum NiFe2O4@AC demonstrated excellent sorption efficiencies of higher than 92.98-97.10% against all three dyes. This adsorbent was characterized, exhibiting a well-developed porous structure with a high surface area of 973.5 m2 g-1. Kinetic and isotherm were studied with the best fit of pseudo-second-order, and Freundlich or Temkin. Qmax values were determined to be 204.07, 266.16, and 177.70 mg g-1 for RhB, MO, and MR, respectively. By selecting HCl as an elution, NiFe2O4@AC could be efficiently reused for at least 4 cycles. Thus, the Bidens pilosa-derived NiFe2O4@AC can be a promising material for effective and recyclable removal of dye pollutants from wastewater.

Preparation of amphoteric double network hydrogels based on low methoxy pectin: Adsorption kinetics and removal of anionic and cationic dyes

The objective of this research was to devise a functional hydrogel was synthesized using pectin (PE), acrylic acid (AA), dimethyldiallyl ammonium chloride (DC), and polyvinyl alcohol (PVA), designed to adsorb both cationic and anionic dyes concurrently. The low methoxy pectin formed double network hydrogel through chemical and physical crosslinking with AA and PVA respectively. DC is combined into the hydrogel system through copolymerization reaction. Analysis of hydrogel's physicochemical properties was conducted using techniques such as infrared spectroscopy, texture analysis, thermogravimetry, and scanning electron microscopy. Dyes adsorption studies showed that the LP/AA/DC/PVA-2 hydrogel, prepared at the molar ratio of AA to DC of 1:2, exhibited higher adsorption efficiency for methylene blue (MB) and Congo red (CR). Kinetics and isotherms studies indicated that the adsorption behavior conformed to the pseudo-second-order kinetic model and Langmuir isotherm model. By the Langmuir isotherm fitting, the maximum adsorption capacities of MB and CR by LP/AA/DC/PVA-2 were recorded to be 222.65 mg/g and 316.46 mg/g, respectively. The adsorption mechanism is dominated by the hydrogen bonding and electrostatic interactions. Further, the adsorption and desorption experiments demonstrated that LP/AA/DC/PVA-2 hydrogel have excellent reusability.

Metal/metal oxide-carbohydrate polymers framework for industrial and biological applications: Current advancements and future directions

Recently, the development and consumption of metal/metal oxide carbohydrate polymer nanocomposites (M/MOCPNs) are withdrawing significant attention because of their numerous salient features. Metal/metal oxide carbohydrate polymer nanocomposites are being used as environmentally friendly alternatives for traditional metal/metal oxide carbohydrate polymer nanocomposites exhibit variable properties that make them excellent prospects for a variety of biological and industrial uses. In metal/metal oxide carbohydrate polymer nanocomposites, carbohydrate polymers bind with metallic atoms and ions using coordination bonding in which heteroatoms of polar functional groups behave as adsorption centers. Metal/metal oxide carbohydrate polymer nanocomposites are widely used in woundhealing, additional biological uses and drug delivery, heavy ions removal or metal decontamination, and dye removal. The present review article features the collection of some major biological and industrial applications of metal/metal oxide carbohydrate polymer nanocomposites. The binding affinity of carbohydrate polymers with metal atoms and ions in metal/metal oxide carbohydrate polymer nanocomposites has also been described.

Super-amphiphobic arabic gum-based coatings on textile for on-demand oily and dye wastewater treatment

Different membrane materials have broadly been constructed for oil-containing water separation, but most of preparation routes involve corrosive or toxic chemicals and especially many materials have only single superwetting property. Herein, a novel and eco-friendly cellulose-based textile membrane is developed by incorporating the composite coating consisting of arabic gum (AG), attapulgite (APT), and iron (Fe) onto cellulose textiles. The functionalized textile is superoleophobic underwater and superhydrophobic underoil. As a result, the textile prewetted with water or oil can be employed to separate light oil layer/water and heavy oil layer/water mixtures, respectively, and the separation efficiency to the two types of mixtures is larger than 98.3 %. Results also reveal that the decorated textile possesses superior stability and recyclability in purifying oily wastewater. More importantly, such coated textile is capable of filtrating water-soluble contaminants (dyes) from polluted water. Due to the versatility and environmental compatibility of product as well as the accessibility as agricultural and forestry product as raw materials, the advanced textiles may offer effective solutions to oily wastewater purification and water-soluble contaminant removal.

Development of a novel in-situ aluminum/carbon composite from olive mill wastewater for the selective adsorption and separation of malachite green and acid yellow 61

In this study, an aluminum/carbon composite was developed from olive mill wastewater (OMWW) and successfully applied in the removal/separation of malachite green (MG) and acid yellow 61 (AY61) and in the treatment of a real discharge from a denim dye bath. The optimized composite (0.5% Al) is microporous, has a specific surface area of 1269 m².g^-1, rich in anionic sites, has an adsorption capacity of 1063 mg.g^-1 and exhibited efficient separation of AY61/MG. Thermodynamic results showed physical, endothermic and disordered adsorption. The substrates were attached to the surface by electrostatic, hydrogen and π- π interactions through the contribution of multiple sites in parallel and non-parallel orientations. The composite can be used repeatedly without significantly losing its performance. This study, presents an exploitation of agricultural liquid waste to develop carbon composites for industrial dye removal and separation, creating new economic opportunities for farmers and rural communities.

Hierarchical porous biochar from kelp: Insight into self-template effect and highly efficient removal of methylene blue from water

Biochar is known to efficiently remove dyes especially for biochar with hierarchical pores and partial N-species. Here, a facile pyrolysis is used to yield N-doped biochar from kelp without additives, showing surface areas of 771 m2/g as temperature up to 1000 °C and hierarchical small-sized mesopores (2-4 nm) and wide meso-macropores (8-60 nm). A possible self-template mechanism from inorganics is proposed to form hierarchical pore architecture in biochar and used for methylene blue (MB) removal. Biochar pyrolyzed at 1000 °C is found to be efficient for MB removal with uptake of 379.8 mg/g under ambient conditions, one of the largest ever recorded uptakes for other biochar without activation, owing to synergistic effects of high surface areas, mesopores, and graphitized N-species. These results confirm that a facile pyrolysis for transformation of kelp into efficient dyes adsorbent is a cost-effective process for economic and environmental protection.

Green synthesis of iron oxide nanoparticles derived from water and methanol extract of Centaurea solstitialis leaves and tested for antimicrobial activity and dye decolorization capability

In this research, nanoparticles derived from water extract of Centaurea solstitialis leaves were used as green adsorbent in Fenton reaction for Reactive Red 180 (RR180) and Basic Red 18 (BR18) dyes removal. At optimum operating conditions, nanoparticles proved high performance in the tested dyes removal with more than 98% of removal elimination. The free-radical scavenging, DNA nuclease, biofilm inhibition capability, antimicrobial activity, microbial cell viability, and antimicrobial photodynamic therapy activities of the iron oxide nanoparticles (FeO-NPs) derived from water and methanol extract of plant were investigated. Each of the following analysis: SEM-EDX, XRD, and Zeta potential was implemented for the prepared NPs characterization and to describe their morphology, composition and its behavior in an aqueous solution, respectively. It was found that, the DPPH scavenging activities increased when the amount of nanoparticles increased. The highest radical scavenging activity achieved with FeO-NPs derived from water extract of plant as 97.41% at 200 mg/L. The new green synthesized FeO-NPs demonstrated good DNA cleavage activity. FeO-NPs showed good in vitro antimicrobial activities against human pathogens. The results showed that both synthesized FeO-NPs displayed 100% antimicrobial photodynamic therapy activity after LED irradiation. The water extract of FeO-NPs and methanol extract of FeO-NPs also showed a significant biofilm inhibition.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Photocatalytic activity of calcined chicken eggshells for Safranin and Reactive Red 180 decolorization

One of the most important problems affecting the environment today is the inability to adequately treat wastewater containing dyes. Among of the many treatment processes used in the treatment of dye-containing wastewater, photocatalytic based wastewater treatment processes attract the attention of scientists as a new, economically feasible, and promising approach which has been in practice for a few decades. However, in order to use these processes in wider areas, cheap and effective catalysts are still being developed today. In this study, the photocatalytic activity of eggshell-CaO produced from waste chicken eggshells was investigated for decolorization of Safranin (Basic Red 2) and Reactive Red 180 (RR180) dyes. First, sintering process was applied to the waste chicken eggshells at different temperatures (300, 600, 900 °C) in order to observe CaO formation from the eggshells. Second, the parameters such as photocatalyst amount, pH, concentration of dyes, and reaction time were optimized on dye removal efficiency in photocatalytic experiments. The optimum conditions were performed under visible light and found to be 1 g/L of catalyst amount (sintered at 900 °C), original solution pH (6.80 for Safranin and 6.60 for RR180), and 5 mg/L of dye concentration. The photocatalytic removal efficiencies of Safranin and RR180 dyes were 100% and 97.90%, respectively, under the determined optimum experimental conditions. The adsorption efficiency of the dyes that could be realized during the photocatalytic experiment was measured as 20.99% and 9.99% for Safranin and RR180 dyes, respectively.

Economic and facile approach for synthesis of graphene-titanate nanocomposite for water reclamation

Graphene and its composites with semiconductor materials have been received highly attention in many research areas because of their unique properties. Efficient application of graphene is hindered by the lack of cost-effective synthesis methods. In this work, an economic and facile route for mass production of graphene-titanate nanocomposite has been discussed. Graphene was prepared by exfoliation of graphite powder in 40% ethanol aqueous solution. Titanate nanotubes were grown on graphene sheets by hydrothermal method, where the dispersed graphene sheets were mixed with titanate solution and then placed in autoclave and placed in oven for 16 h at 160 °C. The prepared composite was characterized by transmission electron microscope (TEM), scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), thermogravimetric analysis (TGA). All the obtained results confirmed the synthesis of graphene and its composite with titanate in highly uniform and pure form. The adsorption efficiency of the prepared composite was tested using methylene blue (MB) as a model dye. The adsorption isotherm was investigated using Freundlich and Langmuir models. The adsorption capacity of MB was 270.27 mg/g. The obtained correlation coefficients (R²) by Freundlich and Langmuir model were 0.996 and 0.973, respectively. The adsorption kinetics was investigated and discussed using different models. The thermal stability of the developed composite is improved after MB adsorption.

Application of 3D magnetic nanocomposites: MXene-supported Fe3O4@CS nanospheres for highly efficient adsorption and separation of dyes

Due to the presence of several hydroxyl and amino groups on the surface, chitosan (CS) has been reported to be a potential candidate to solve the pollution caused by dyes in different industrial wastewater. However, it is associated with the recycling issues. Nano-Fe₃O₄ has the advantages of easy magnetic separation and surface functionalization, which can improve the efficiency as well as selectivity of separation. However, its tendency for agglomeration can reduce the adsorption capacity. MXene can provide suitable support for both CS and Fe₃O₄ to construct new MXene@Fe₃O₄@CS composites. In this study, MXene@Fe₃O₄@CSmagnetic nanosphere was synthesized by ultrasonic self-assembly to remove Congo red (CR). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier Transform Infrared (FT-IR) spectroscopy were employed to characterize the nanocomposites. According to the batch experiments, the adsorption kinetics were found to predominantly follow quasi-secondary rate kinetics. The adsorption followed Langmuir isotherm model. The adsorption process was found to be endothermic, entropy-driven, and thermodynamically spontaneous process. The adsorption capacity for CR was estimated as 620.22 mg·g^-1.

Performance of 2D MXene as an adsorbent for malachite green removal

The utilization of novel materials is one of the reliable solutions for wastewater remediation processes, where they could be applied as adsorbents. Among these materials, MXenes are increasingly used composites in different applications, including water treatment techniques, due to their exceptional properties that enhance the total performance. In this work, we used Ti₃C₂T_x MXene as an adsorbent for the Malachite Green dye removal, considering the dye's chromatic and leuco forms. Effects of adsorbent dose, pH, contact time, and dye's initial concentration on the removal efficiency were studied. Three adsorption isotherms, namely Freundlich, Langmuir, and Temkin, were studied to find the best fitting model with the practical results, where the Freundlich model had the highest R², 0.974. Furthermore, five kinetics models were used to study the adsorption kinetics; these are zero-order, pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion. However, the pseudo-second-order model showed the highest R² value of 0.999. It was found that as the adsorbent dose increases, the removal efficiency increases and reaches 94.1% when the dose was 0.09 g in a 50 ml solution. Interestingly, it was noticed that the removal efficiency increases as the pH increases or decreases; the minimum efficiency was noticed at pH = 6. This was attributed to the leuco nature of the dye; whereas the pH increases, the dye turns colorless and becomes hard to detect. This finding shows that the removal is high when the pH is low, and it is low as the pH gets high but cannot be detected because of the color loss. The removal efficiency dramatically increased as the contact time increased at first; however, at 60 min, it almost reached the study state and the follwoing change was marginal. Finally, the removal efficiency decreased as the dye's initial concentration increased.

Biosorption mechanisms of cationic and anionic dyes in a low-cost residue from brewer's spent grain

The brewer's spent grain (BSG) is a byproduct of the brewing industry produced in large quantities and with few ecological disposal options. The use of this low-cost residue was investigated for the removal of methylene blue (MB) and tartrazine yellow (TY) dyes. The BSG has been extensively characterized to obtain its physicochemical characteristics. Batch experiments were conducted to investigate the effects of biosorption parameters: initial pH, kinetics, equilibrium isotherms and adsorption thermodynamics. The characterization showed high carbon content and heterogeneous morphology with the presence of meso and macropores. The best experimental conditions were obtained as pH 11 for MB and pH 2 for TY. Kinetics resulted in an equilibrium time of 240 min for MB and 300 min for TY and was best represented by the pseudo-second order model. Different interaction mechanisms were suggested, such as electrostatic interactions, electron donors and electron acceptors, hydrogen bonds, π-π dispersion interactions and the dye molecules aggregation. Equilibrium data were better represented by Langmuir isotherm. The maximum adsorbed amount of MB and TY was 284.75 and 26.18 mg/g, respectively, in each better experimental condition. Through the thermodynamic analysis, it was observed that the adsorption of the dyes was spontaneous and favourable. MB is preferentially retained through chemisorption, whereas TY followed a physical process. Considering the characteristics and results found compared to the recent literature, it was verified that BSG can be used as an effective and innovative biosorbent for removal purposes of dyeing effluent.

A comprehensive review on magnetic carbon nanotubes and carbon nanotube-based buckypaper for removal of heavy metals and dyes

Industrial effluents contain several organic and inorganic contaminants. Among others, dyes and heavy metals introduce a serious threat to drinking waterbodies. These pollutants can be noxious or carcinogenic in nature, and harmful to humans and different aquatic species. Therefore, it is of high importance to remove heavy metals and dyes to reduce their environmental toxicity. This has led to an extensive research for the development of novel materials and techniques for the removal of heavy metals and dyes. One route to the removal of these pollutants is the utilization of magnetic carbon nanotubes (CNT) as adsorbents. Magnetic carbon nanotubes hold remarkable properties such as surface-volume ratio, higher surface area, convenient separation methods, etc. The suitable characteristics of magnetic carbon nanotubes have led them to an extensive search for their utilization in water purification. Along with magnetic carbon nanotubes, the buckypaper (BP) membranes are also favorable due to their unique strength, high porosity, and adsorption capability. However, BP membranes are mostly used for salt removal from the aqueous phase and limited literature shows their applications for removal of heavy metals and dyes. This study focuses on the existence of heavy metal ions and dyes in the aquatic environment, and methods for their removal. Various fabrication approaches for the development of magnetic-CNTs and CNT-based BP membranes are also discussed. With the remarkable separation performance and ultra-high-water flux, magnetic-CNTs, and CNT-based BP membranes have a great potential to be the leading technologies for water treatment in future.

Fabrication of N-doped carbons from waste bamboo shoot shell with high removal efficiency of organic dyes from water

N-doped carbons were obtained from bamboo shoot shell via hydrothermal pretreatment under salt assistance followed by carbonization, using melamine as nitrogen source. The carbons with tubular morphology and surface areas in 406-489 m²/g range were used as adsorbents for the removal of methyl orange (MO) and rhodamine B (RhB). Adsorption isotherms and kinetic fitting showed much better accordance with Freundlich model and pseudo-second-order, showing balanced capacity (q_e) of 50 mg/g for MO and 42 mg/g for RhB on the pristine carbons (BHC-800) at 25 °C. After N-doping treatment, carbons (BSC-M20) had q_e of MO and RhB up to 140 and 100 mg/g, respectively, confirming a positive effect of N-doping on the enhancement of dyes removal. The findings indicated that hydrothermal treatment followed by carbonization was efficient to obtain N-doped carbons from biomass materials, and the present BSS-derived carbons were promising adsorbents for organic dyes removal from water.

Low pressure modified polyamide 6 membrane for effective fractionation of dyes and NaCl

A co-polymer (SPAA6) of 5-sulfoanthranilic acid (5SAA) and ε-caprolactam was used to prepare membrane through nonsolvent induced phase separation (NIPS) method. The micro-structure of membrane was adjusted by small molecules to improve mechanic strength and performance, involving 7 commercial ionic surfactant and a self-synthesized one, S20. S20 showed the best compatibility with SPAA6, which converted spherical phase into network of strip-like units in micro-structure of membrane. Meanwhile, average pore size of the membrane was narrowed from 4.271 nm to 3.391 nm, tested by BET method. Tensile strength of membrane was improved from 2.5 MPa to 2.9 MPa. Therefore, anionic dyes rejection and membrane stability were both improved. It actually demonstrated that molecular weight distribution of SPAA6 was crucial for micro-structure construction of membrane since S20 was the SPAA6 of low molecular weight. In blend solution filtration test, membrane MS2 (1:2 for S20:SPAA6) displayed 98.22% rejection to Congo Red (CR) acid and 96.18% NaCl permeation under 1 bar. It showed 80.18% rejection to chrome blue K (ABK) and 96.28% NaCl permeation. Both water permeance were higher than 3.5 L·m^-2·h^-1·bar. Membrane MS2 showed the potential of fractionation of dye and NaCl, which was promising in textile waste water treatment.

One-step synthesis of Cu(II) metal-organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(II)-based metal-organic gel (Cu-MOG) with a nanoporous 3D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.

The preparation of thin-walled multi-cavities β-cyclodextrin polymer and its static and dynamic properties for dyes removal

Thin-walled multi-cavities β-cyclodextrin polymers (Hβ-CDs) were prepared by the suspension polymerization method using SiO₂ nanoparticles as a template. The components and morphology structure of Hβ-CDs were characterized by FTIR, BET, SEM, and TEM. The adsorption performances of the prepared nano-adsorbent Hβ-CDs on crystal violet (CV), heavy metal ions, some cationic, neutral, and anionic dyes were investigated. The influences of the pH and ionic strength on CV adsorption by the Hβ-CDs were explored. The correlation coefficient (R²) of pseudo-second-order kinetic model reached 0.9984 and the adsorption isotherm was closer to the Langmuir model. As the temperature increased, the R² of the Freundlich isotherm model rose. Compared to anionic ones and heavy metal ions, Hβ-CDs had a better adsorption efficiency for cationic dyes. Dynamic adsorption also indicated the thin-walled multi-cavities structure was beneficial for improving absorptivity and application of β-cyclodextrin polymers. In addition, the Hβ-CDs exhibited potentially applicable for the regeneration and reuse with the removal efficiency of CV was as high as 89% in the fourth cycle.

Highly efficient adsorption of dyes by biochar derived from pigments-extracted macroalgae pyrolyzed at different temperature

Biochar is known to efficiently adsorb dyes from wastewater. In this study, biochar was derived from macroalgae residue by pyrolysis, and the influence of varying temperature (from 400 °C to 800 °C) on biochar characteristics was investigated. Among the biochar samples tested, macroalgae-derived biochar possessing highly porous structure, special surface chemical behavior and high thermal stability was found to be efficient in removing malachite green, crystal violet and Congo red. The biochar derived by pyrolysis at 800 °C showed the highest adsorption capacity for malachite green (5306.2 mg g^-1). In this study, the transformation of microalgae residue into a highly efficient dye adsorbent is a promising procedure for economic and environmental protection.

Sonochemical synthesis of highly crystalline photocatalyst for industrial applications

Highly photo active pure anatase form of TiO₂ nanoparticles with average particle size 4nm have been successfully synthesized by ultrasonic acoustic method (UAM). The effects of process variables i.e. precursors concentration and sonication time were investigated based on central composite design and response surface methodology. The characteristics of the resulting nanoparticles (RNP) were analyzed by scanning electron microscopy, dynamic light scattering, transmission electron microscopy, X-ray diffractometry and Raman spectroscopy. Photocatalytic experiments were performed with methylene blue dye which is considered as model organic pollutant in textile industry. A comparative analysis between the RNP and commercially available Degussa P25 for photocatalytic performance against dye removal efficiency was performed. The rapid removal of methylene blue in case of RNP indicates their higher photocatalytic activity than P25. Maximum dye removal efficiency 98.45% was achieved with optimal conditions i.e. TTIP conc. 10mL, EG conc. 4mL and sonication time 1h. Interestingly, no significant difference was found in the photocatalytic performance of RNP after calcination. Moreover, self-cleaning efficiency of RNP deposited on cotton was evaluated in RGB color space. The obtained results indicate the significant impact of ultrasonic irradiations on the photocatalytic performance of pure anatase form than any other hybrid type of TiO₂ nanoparticles.