Synthesis and characterization of silver nanoparticles from (bis)alkylamine silver carboxylate precursors

Probing capping mechanisms and polymer matrix loading of biogenic vaterite CaCO3-Ag hybrid through X-ray photoelectron spectroscopy (XPS)

Despite extensive research in the literature, the synthesis of silver nanoparticles (AgNPs) via capping mechanisms remains incompletely understood. This study employs a mechanistic approach to unravel the underlying molecular interactions driving the capping process of biogenic vaterite CaCO3-Ag and explores their interactions with different polymer matrices. X-ray photoelectron spectroscopy (XPS) was used to reveal the capping mechanisms, surface composition alterations, and vaterite polymorph transitions. The oxidation states of AgNPs exhibited distinct changes under different capping agents. The Ag3d spin-orbit splitting profiles revealed the coexistence of Ag+ and Ag0 within CaCO3-Ag, with a significant presence of Ag0 when poly(sodium 4-styrene sulfonate) was employed as the capping agent. Conversely, the use of carboxy methyl cellulose as the capping agent resulted in Ag+ dominance. XPS analysis illuminated the transformation of CaCO3 polymorphs from calcite to vaterite structure, which remained stable following embedding within polymer matrices. Integrating CaCO3-Ag microspheres into polymer matrices and investigating their surface characteristics represents a strategic step toward tailoring material properties for potential applications in active packaging and biomedicine.

γ-Ray Irradiation Enables Annealing- and Light-Soaking-Free Solution Processable SnO2 Electron Transport Layer for Inverted Organic Solar Cells

The electrode buffer layer is crucial for high-performance and stable OSCs, optimizing charge transport and energy level alignment at the interface between the polymer active layer and electrode. Recently, SnO2 has emerged as a promising material for the cathode buffer layer due to its desirable properties, such as high electron mobility, transparency, and stability. Typically, SnO2 nanoparticle layers require a postannealing treatment above 150°C in an air environment to remove the surfactant ligands and obtain high-quality thin films. However, this poses challenges for flexible electronics as flexible substrates can't tolerate temperatures exceeding 100°C. This study presents solution-processable and annealing-free SnO2 nanoparticles by employing y-ray irradiation to disrupt the bonding between surfactant ligands and SnO2 nanoparticles. The SnO2 layer treated with y-ray irradiation is used as an electron transport layer in OSCs based on PTB7-Th:IEICO-4F. Compared to the conventional SnO2 nanoparticles that required high-temperature annealing, the y-SnO2 nanoparticle-based devices exhibit an 11% comparable efficiency without postannealing at a high temperature. Additionally, y-ray treatment has been observed to eliminate the light-soaking effect of SnO2. By eliminating the high-temperature postannealing and light-soaking effect, y-SnO2 nanoparticles offer a promising, cost-effective solution for future flexible solar cells fabricated using roll-to-roll mass processing.

Bio-fabrication of silver nanoparticles using Commelina erecta, L.: a mechanistic approach on synthesis, optimization, antibacterial, and antioxidant potential

The ongoing exploration of economical, sustainable, and environment-friendly methods for synthesizing monodisperse colloidal metal nanoparticles is growing day by day due to their potential application in various fields. The use of plant derivatives in nanoparticle synthesis and their suitability as sustainable catalysts have emerged as significant areas of research. In this study, silver nanoparticles were synthesized using an aqueous extract obtained from the commonly found weed Commelina erecta, L. Extensive study is conducted to optimize various synthesis parameters such as pH, reducing agent concentration, silver nitrate concentration, and temperature. The plant extract utilized in the synthesis process contained variety of antioxidants, including malic acid, phenol, benzoic acid, and catechol, which played a crucial role in both reduction and capping during the synthesis process, thereby making them suitable for biomedical applications. The optimized synthesis process yielded silver nanoparticles with a particle size of 16.2 ± 3.1 nm. These nanoparticles exhibited excellent stability and demonstrated remarkable antibacterial activity compared to the standard antibacterial agent, streptomycin. In addition, the silver nanoparticles displayed promising antioxidant activity attributed to the presence of antioxidant functional groups on their surface. This study reports, for the first time, the synthesis of silver nanoparticles using antioxidant compounds present in C. erecta, L. plant extract. The antioxidant compounds identified through GC-MS belong to phenols, phenolic acids, and carboxylic acid groups. Furthermore, the exceptional antimicrobial and antioxidant properties exhibited by the synthesized silver nanoparticles offer new possibilities for their potential applications.

Heterogeneous interactions and transformations of dibasic esters with indoor relevant surfaces

Dibasic esters (DBEs) have recently become emerging indoor air pollutants due to their usage as a solvent for mixtures of paints and coatings. In this study, we explored the adsorption/desorption kinetics, heterogeneous interactions, and chemical transformations of dimethyl succinate (DMS, C6H10O4), a component of commercial dibasic ester solvent mixtures, on indoor relevant surfaces using transmission Fourier-transform infrared (FTIR) spectroscopy and high-resolution mass spectrometry (HRMS). Silica (SiO2) and rutile (TiO2) were used as proxies for window glass, and an active component in paint and self-cleaning surfaces, respectively. FTIR spectroscopy of these surfaces shows that DMS can interact with SiO2 and TiO2 through hydrogen bonding between the carbonyl oxygen and surface hydroxyl groups. The kinetics show fast adsorption of DMS onto these surfaces followed by slow desorption. Furthermore, new products formed observed on TiO2 surfaces in addition to molecularly adsorbed DMS. In particular, succinate (C5H7O) was observed binding to the surface in a bidentate chelating coordination mode as indicated by the appearance of νas(COO-) and νs(COO-) bands in the FTIR spectra. These absorption bands grow in intensity over time and the resulting product remains strongly adsorbed on the surface. The formation of adsorbed succinate is a result of a reaction with DMS on Lewis acid sites of the TiO2 surface. Overall, the slow desorption of these adsorbed species indicates that indoor surfaces can become long term reservoirs for dibasic esters and their surface products. Moreover, in the presence of ∼50% relative humidity, water displaces outer layers of adsorbed DMS on SiO2 and TiO2, while having no impact on the more strongly bound surface species.

Enhancing Conductivity of Silver Nanowire Networks through Surface Engineering Using Bidentate Rigid Ligands

Solution processable metallic nanomaterials present a convenient way to fabricate conductive structures, which are necessary in all electronic devices. However, they tend to require post-treatments to remove the bulky ligands around them to achieve high conductivity. In this work, we present a method to formulate a post-treatment free conductive silver nanowire ink by controlling the type of ligands around the silver nanowires. We found that bidentate ligands with a rigid molecular structure were effective in improving the conductivity of the silver nanowire networks as they could maximize the number of linkages between neighboring nanowires. In addition, DFT calculations also revealed that ligands with good LUMO to silver energy alignment were more effective. Because of these reasons, fumaric acid was found to be the most effective ligand and achieved a large reduction in sheet resistance of 70% or higher depending on the nanowire network density. The concepts elucidated from this study would also be applicable to other solution processable nanomaterials systems such as quantum dots for photovoltaics or LEDs which also require good charge transport being neighboring nanoparticles.

Biogenic Vaterite Calcium Carbonate-Silver/Poly(Vinyl Alcohol) Film for Wound Dressing

Vaterite, a spherical polymorph of CaCO3, shows potential as a carrier for the stable and controlled release of silver nanoparticles (AgNPs), preventing their aggregation or loss of efficacy during application. Furthermore, the embedding of CaCO3-Ag in a poly(vinyl alcohol) (PVA) matrix helps effectively encapsulate and protect the CaCO3-Ag microspheres and provides mechanical stability for better contact with the wound surface. This article focuses on the fabrication of an antimicrobial and biocompatible absorbent film embedded with precipitated biogenic vaterite CaCO3-Ag microspheres. The impact of vaterite CaCO3-Ag on the physical, chemical, nanomechanical, biocompatibility, and antimicrobial properties of the PVA films was investigated. The morphology study revealed a bilayer film structure with an inactive and active surface containing homogeneously distributed vaterite CaCO3-Ag. The X-ray photoelectron spectroscopy (XPS) analysis of the spin-orbit splitting in the Ag 3d5/2 and Ag 3d3/2 peaks indicated the presence of both metallic and ionic states of silver in vaterite CaCO3-Ag prior to its incorporation into the PVA polymer matrix. However, upon embedding in the PVA matrix, a subsequent transformation to solely ionic states was observed. The nanomechanical properties of PVA improved, and the reduced modulus and hardness increased to 14.62 ± 5.23 and 0.64 ± 0.29 GPa, respectively. The films demonstrate a significant activity toward Gram-negative Escherichia coli bacteria. The release of AgNPs was studied in both open and closed systems at pH 6, mimicking the pH environment of the wound, and it demonstrated a dependency on the type of capping agent used for synthesis and loading of AgNPs. The results further revealed the biocompatibility of the prepared films with human dermal fibroblast cells at a concentration of ≤5 mg/mL, making them applicable and functional for wound dressing applications.

Biosynthesis of silver nanoparticles (Ag-NPs) using Senna alexandrina grown in Saudi Arabia and their bioactivity against multidrug-resistant pathogens and cancer cells

There is no doubt that the risk of drug-resistant pathogens and cancer diseases is on the rise. So, the goal of this study was to find out how effective silver nanoparticles (Ag-NPs) made by Senna alexandrina are at fighting these threats. In this work, S. alexandrina collected from Medina, Saudi Arabia was used and the biosynthesis method was applied to produce the Ag-NPs. The characterization of Ag-NPs was done using different analytical techniques, including UV spectroscopy, FT-IR, TEM, and XRD analysis. The MIC, MBC, and MTT protocols were applied to confirm the bioactivity of the Ag-NPs as antibacterial and anticancer bioagents. The findings reported indicating that the aqueous extract of S. alexandrina leaves, grown naturally in Saudi Arabia, is ideal for the production of bioactive Ag-NPs. The hydroxyl, aliphatic, alkene, N-H bend of primary amines, C-H bonds, and C-O bonds of alcohol were detected in this product. The small, sphere-shaped particles (4-7 nm) were the most prevalent among the bioactive Ag-NPs produced in this work. These nanoparticles inhibited some important multidrug-resistant pathogens (MDRPs) (Escherichia coli, Acinetobacter baumanii/haemolyticus, Staphylococcus epidermidis, and Methicillin-resistant Staphylococcus aureus (MRSA)), as well as their ability to inhibit breast cancer cells (MCF-7 cells). The MIC of Ag-NPs ranged from 0.03 to 0.6 mg/mL, while their MBC ranged from 0.06 to 2.5 mg/mL. Anticancer activity test showed that IC₅₀ of the Ag-NPs against tested breast cancer cells was 61.9 ± 3.8 µg/mL. According to the current results, biosynthesis using S. alexandrina leaves grown naturally in Saudi Arabia was an ideal technique for producing bioactive Ag-NPs that could be used to combat a variety of MDRPs and cancer diseases.

Electroless Deposition of Silver onto Silica Nanoparticles to Produce Lipophilic Core-Shell Nanoparticles

HYPOTHESIS

The colloidal stability of noble metal nanoparticles can be tuned for solvents of varying hydrophobicity by modifying the surface chemistry of the particles with different capping agent architectures. Challenges arise when attempting to separately control multiple nanoparticle properties due to the interdependence of this adsorption process on the surface chemistry and metal architecture. A surfactant-mediated, templated synthesis strategy should decouple control over size and stability to produce lipophilic nanoparticles from aqueous reagents.

EXPERIMENTS

A modified electroless plating process that produces oil-dispersible core-shell silver-silica nanoparticles is presented. Amine-terminated alkanes are utilized as the capping agents to generate lipophilic surface coatings and the particles are temporarily stabilized during the synthesis by adding a Pluronic surfactant that enhances dispersibility in the aqueous reaction medium. The evolution of shell morphology, composition, and colloidal stability was analyzed against capping agent architecture and concentration. The role of particle shape was also tested by interchanging the template geometry.

FINDINGS

The capping agents installed on the silver shell surface displayed both colloidal stability enhancements and a minimum effective capping concentration that is a function of molecular weight without influencing the shell composition. Particle geometry can be controlled by interchanging the silica template size and shape.

Solvent types used for the preparation of hydrogels determine their mechanical properties and influence cell viability through gelatine and calcium ions release

Alginate-gelatin hydrogels are the most commonly used materials for 3D bioprinting. Their printability depends on their properties, and these derive from the way they are prepared and their very composition. Therefore, the aim of the study was to investigate the type of solvent (deionized water, phosphate buffer, and culture medium) and contents of gelatin in the composition of hydrogel (2% wt/vol alginate, 6% and 9% wt/vol of gelatin) on their biological, physicochemical, and mechanical properties, as well as printability and the ability of cells to proliferate in the printed structures. The results obtained revealed that all the manufactured hydrogel materials are biocompatible. The use of deionized water as a solvent results in the highest degree of cross-linking of hydrogels, thus obtaining a polymer with the highest rigidity. Moreover, an increase in gelatin content leads to an increase in the Young's modulus value, irrespectively of the solvent in which the hydrogels were prepared. Based on the chemical structure, it is more reasonable to use a culture medium for bioink preparation due to free NH and NH₂ groups being present, which are ligands for cell attachment and their proliferation. For the selected material (2A9GM), the printability and high viability of the cells after printing were confirmed. In this case, the concentration of the cross-linking agent influences gelatin amount release and calcium ions release, and these two processes determine the change in the viability of the cells encapsulated in the bioink.

Glucose-Functionalized Silver Nanoparticles as a Potential New Therapy Agent Targeting Hormone-Resistant Prostate Cancer cells

Purpose

Silver nanoparticles (AgNPs) have shown great potential as anticancer agents, namely in therapies’ resistant forms of cancer. The progression of prostate cancer (PCa) to resistant forms of the disease (castration-resistant PCa, CRPC) is associated with poor prognosis and life quality, with current limited therapeutic options. CRPC is characterized by a high glucose consumption, which poses as an opportunity to direct AgNPs to these cancer cells. Thus, this study explores the effect of glucose functionalization of AgNPs in PCa and CRPC cell lines (LNCaP, Du-145 and PC-3).

Methods

AgNPs were synthesized, further functionalized, and their physical and chemical composition was characterized both in water and in culture medium, through UV-visible spectrum, dynamic light scattering (DLS), transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR). Their effect was assessed in the cell lines regarding AgNPs’ entering pathway, cellular proliferation capacity, ROS production, mitochondrial membrane depolarization, cell cycle analysis and apoptosis evaluation.

Results

AgNPs displayed an average size of 61nm and moderate monodispersity with a slight increase after functionalization, and a round shape. These characteristics remained stable when redispersed in culture medium. Both AgNPs and G-AgNPs were cytotoxic only to CRPC cells and not to hormone-sensitive ones and their effect was higher after functionalization showing the potential of glucose to favor AgNPs’ uptake by cancer cells. Entering through endocytosis and being encapsulated in lysosomes, the NPs increased the ROS, inducing mitochondrial damage, and arresting cell cycle in S Phase, therefore blocking proliferation, and inducing apoptosis.

Conclusion

The nanoparticles synthesized in the present study revealed good characteristics and stability for administration to cancer cells. Their uptake through endocytosis leads to promising cytotoxic effects towards CRPC cells, revealing the potential of G-AgNPs as a future therapeutic approach to improve the management of patients with PCa resistant to hormone therapy or metastatic disease.

The effect of AgNPS bio-functionalization on the cytotoxicity of the yeast Saccharomyces cerevisiae

This work used Sedum praealtum leaf extract to synthesize silver nanoparticles (AgNPs) in a single step. The cytotoxicity of AgNPs was studied with the yeast Saccharomyces cerevisiae W303-1. In addition, the antioxidant activity of the DPPH radical was studied both in the extract of S. praealtum and in the AgNPs. UV-Vis spectroscopy determined the presence of AgNPs by the location of the surface plasmon resonance (SPR) band at 434 nm. TEM and XRD analyzes show AgNPs with fcc structure and hemispherical morphology. Also, AgNPs range in size from 5 to 25 nm and have an average size of 14 nm. 1H NMR, FTIR, and UV-Vis spectroscopy techniques agreed that glycosidic compounds were the main phytochemical components responsible for the reduction and stabilization of AgNPs. In addition, AgNPs presented a maximum of 12% toxicity in yeast attributed to the generation of ROS. Consequently, there was low bioactivity because glycoside compounds cover the biosynthesized AgNPs from S. praealtum. These findings allow applications of AgNPs involving contact with mammals and higher organisms.

Carboxylate as a Non-innocent L-Ligand: Computational and Experimental Search for Metal-Bound Carboxylate Radicals

We show that the carboxylate radical acts as an L-ligand with certain high-spin transition metal centers. Such coordination preserves the O-radical character needed for C-H activation via hydrogen atom transfer. Capture of the new C-radical by the metal and subsequent reductive elimination leads to formal C-H acyloxylation. Decarboxylation of the RCO₂ radical is minimized through hybridization effects introduced by spiro-cyclopropyl moiety.

Biocatalytic 3D Actuation in Liquid Crystal Elastomers via Enzyme Patterning

Liquid crystal elastomers (LCEs) are stimuli-responsive materials that undergo large shape transformations after undergoing an order-disorder transition. While shape reconfigurations in LCEs are predominantly triggered by heat, there is a considerable interest in developing highly specific triggers that work at room temperature. Herein, we report the fabrication of biocatalytic LCEs that respond to the presence of urea by covalently immobilizing urease within chemically responsive LCE networks. The hydrogen-bonded LCEs developed in this work exhibited contractile strains of up to 36% upon exposure to a base. Notably, the generation of ammonia by immobilized urease triggered a disruption in the supramolecular network and a large reduction of liquid crystalline order in the films when the LCEs were exposed to urea. This reduction in order was macroscopically translated into a strain response that could be modulated by changing the concentration of urea or exposure time to the substrate. Local control of the mechanical response of the LCE was realized by spatially patterning the enzyme on the surface of the films. Subsequent exposure of enzymatically patterned LCE to urea-triggered 3D shape transformations into a curl, arch, or accordion-like structure, depending on the motif patterned on the film surface. Furthermore, we showed that the presence of salt was critical to prevent bridging of the network by the presence of ammonium ions, thereby enabling such macroscopic 3D shape changes. The large actuation potential of LCEs and the ability to translate the biocatalytic activity of enzymes to macroscopic 3D shape transformations could enable use in applications ranging from cell culture, medicine, or antifouling.

Ag Nanoparticles for Biomedical Applications-Synthesis and Characterization-A Review

Silver nanoparticles have been intensively studied over a long period of time because they exhibit antibacterial properties in infection treatments, wound healing, or drug delivery systems. The advantages that silver nanoparticles offer regarding the functionalization confer prolonged stability and make them suitable for biomedical applications. Apart from functionalization, silver nanoparticles exhibit various shapes and sizes depending on the conditions used through their fabrications and depending on their final purpose. This paper presents a review of silver nanoparticles with respect to synthesis procedures, including the polluting green synthesis. Currently, the most commonly used characterization techniques required for nanoparticles investigation in antibacterial treatments are described briefly, since silver nanoparticles possess differences in their structure or morphology.

Zeolitic imidazolate framework-derived composites with SnO2 and ZnO phase components for electrocatalytic carbon dioxide reduction

Zeolitic imidazolate framework (ZIF) and its derivatives have attracted a great deal of attention in the field of electrocatalysis. In this paper, a series of tin (Sn)-modified ZIF-based composites (ZSO-X/Y) are synthesized and used as catalysts for the electrochemical reduction of CO2 to produce low-carbon fuels. Among the catalysts obtained, ZSO-2/8 shows the best formate (HCOO-) selectivity compared with others. A faradaic efficiency of 76.70% and a catalytic current density of -9.81 mA cm-2 can be respectively achieved at a potential of -1.16 V vs. reversible hydrogen electrode (VRHE). The high catalytic performance can be attributed to the stable coexistence of two-phase components of SnO2/ZnO inside the catalyst. This work provides an insight into the development of high performance ZIF-based catalysts for the electrochemical reduction of CO2.

Colloidal silver-based lateral flow immunoassay for detection of profenofos pesticide residue in vegetables

A colloidal silver nanoparticle (AgNP)-based lateral flow immunoassay (LFIA) was evaluated in terms of the rapid detection of profenofos (PEO) pesticide residue in vegetables. Colloidal AgNPs, of a diameter of approximately 20 nm, were surface-modified with trisodium citrate dehydrate (TSC) in order to improve their stability and dispersion. An anti-profenofos polyclonal antibody (pAb) was successfully immobilized on the surface of the AgNPs by ionic interaction and characterized using UV-vis, SEM, TEM, FTIR and XPS analyses. Surface modification of Ag-pAb conjugates of varying pH, pAb content and cross-reactivity was employed to design and prepare labels for use in an LFIA to examine whether these factors affect the performance of the assay. The visible detection limit and optical detection limit of the PEO test strip were 0.20 and 0.01 ppm, respectively, in PEO standard solution. This assay showed no cross-reaction with omethoate, methamidophos or pyraclofos. Finally, the PEO test strip was effectively applied for the detection of PEO in liquid vegetables A and B, with optical detection limits of 0.09 and 0.075 ppm, respectively.

Durability of Lubricated Icephobic Coatings under Various Environmental Stresses

Icephobic coatings interest various industries facing icing problems. However, their durability represents a current limitation in real applications. Therefore, understanding the degradation of coatings under various environmental stresses is necessary for further coating development. Here, lubricated icephobic coatings were fabricated using a flame spray method with hybrid feedstock injection. Low-density polyethylene represented the main coating component. Two additives, namely fully hydrogenated cottonseed oil and paraffinic wax, were added to the coating structure to enhance coating icephobicity. Coating properties were characterised, including topography, surface roughness, thermal properties, wettability, and icephobicity. Moreover, their performance was investigated under various environmental stresses, such as repeated icing/deicing cycles, immersion in corrosive media, and exposure to ultraviolet (UV) irradiation. According to the results, all coatings exhibited medium-low ice adhesion, with slightly more stable icephobic behaviour for cottonseed oil-based coatings over the icing/deicing cycles. Surface roughness slightly increased, and wetting performances decreased after the cyclic tests, but chemical changes were not revealed. Moreover, coatings demonstrated good chemical resistance in selected corrosive media, with better performance for paraffin-based coatings. However, a slight decrease in hydrophobicity was detected due to surface structural changes. Finally, paraffin-based coatings showed better resistance under UV irradiation based on carbonyl index and colour change measurements.

Copper(II) Perfluorinated Carboxylate Complexes with Small Aliphatic Amines as Universal Precursors for Nanomaterial Fabrication

Copper(II) carboxylate compounds with ethylamine and isopropylamine of the general formula [Cu2(RNH2)2(µ-O2CRf)4], where R = Et, iPr, and Rf = CnF2n+1, n = 1-6, were characterised in the condensed and gas phases by electron impact mass spectrometry (EI MS), IR spectroscopy, and thermal analysis. A mass spectra analysis confirmed the presence of metallated species in the gas phase. Among the observed fragments, the pseudomolecular ions [Cu2(RNH2)2(µ-O2CRf)3]+ were found, which suggests the dimeric structure of the studied complexes with axially N-coordinated ethyl- or isopropylamine molecules and bridging perfluorinated carboxylates. TGA studies demonstrated that copper transfer to the gas phase occurs even under atmospheric pressure. The temperature range of the [Cu2(RNH2)2(µ-O2CRf)4] and other copper carriers detection, observed in variable temperature infrared spectra, depends on the type of amine. The possible mechanisms of the decomposition of the tested compounds are proposed. The copper films were produced without additional reducing agents despite using Cu(II) CVD precursors in the chemical vapor deposition experiments. The layers of the gel-like complexes were fabricated in both spin- and dip-coating experiments, resulting in copper or copper oxide materials when heated. Dinuclear copper(II) carboxylate complexes with ethyl- and isopropylamine [Cu2(RNH2)2(µ-O2CRf)4] can be applied for the formation of metal or metal oxide materials, also in the nanoscale, by vapour and 'wet' deposition methods.

Synthesis of Free-Standing Silver Foam via Oriented and Additive Nanojoining

Silver foams with high porosity and electrical conductivity have many potential applications in energy storage, catalysis, and fuel cells. However, its application is largely hindered by the low efficiency of complicated synthesis processes. In this work, a facile and rapid bottom-up fabrication of silver foams in an aqueous solution allowing large-scale production through oriented and additive nanojoining of silver nanoplate building blocks is reported. Self-assembling of as-grown silver nanoplates facilitates the oriented nanoscale joining to align the atomic lattice, and the local additive of silver promotes diffusion and interconnection at room temperature to realize a rapid synthesis process. The freeze-dried silver foam exhibits a porosity of 95.45%, an ultralow density of 61 mg·cm^-3, low thermal conductivity of 0.29 W·m^-1·K^-1, and high electrical conductivity of 8086 S·m^-1. This oriented and locally additive nanojoining process presents a new strategy to fabricate silver foams that may also inspire the fabrications of other metal foams.

Expanded Ring NHC Silver Carboxylate Complexes as Efficient and Reusable Catalysts for the Carboxylative Cyclization of Unsubstituted Propargylic Derivatives

Stabilized by a bulky N-heterocyclic carbene [^BP DPr, 1,3-bis(2,6-diisopropylphenyl)-1,3-diazonine-2-ylidene] ligand, new silver carboxylate complexes of the form ^BP DPrAgO₂ C-R (R=Me, Ph) have been synthesized and fully characterized in solution and in the solid state and implemented as sole catalysts (base-, additive-, and, in some cases, solvent-free) in the challenging fixation of carbon dioxide to unsubstituted propargylic derivatives for the synthesis of oxazolidinones and α-methylene cyclic carbonates. Derived from X-ray diffraction studies, the molecular geometry and the concept of buried volume were employed to describe the structural and steric features of these silver complexes. Their stability and efficiency as catalysts have been demonstrated by the synthesis of 29 carboxylation products (72-98 % yield) at low catalyst loadings (0.01-1.5 mol%). Characteristics are high turnover numbers (up to 9400), catalyst recyclability (up to 96 % yield after the 7th cycle with no decomposition of the silver complex), and the possibility to scale-up the reaction.

Synthesis and characterization of bis(amine)palladium(II) carboxylate complexes as precursors of palladium nanoparticles

The synthesis and characterization of the adducts of n-alkyl amine and palladium n-alkyl carboxylate, [Pd(R2NH2)2(R1COO)2] (R1 = 1, 7, and 11; R2 = 8, 12, and 16), as precursors for the synthesis of palladium nanoparticles (PdNPs) was carried out via differential scanning calorimetry, FT-IR, Raman and UV-Vis spectroscopy, NMR spectroscopy (1H, 13C pulsed field gradient spin-echo (PGSE), and 13C CP-MAS), and powder X-ray diffraction. Pd n-alkyl carboxylates were obtained by a ligand exchange reaction from palladium acetate and the appropriate aliphatic carboxylic acid. It is proposed that carboxyl moieties in the presence of amine ligands are bound to palladium ions via monodentate bonding as opposed to bridging bidentate coordination of pure palladium carboxylate which exists in the form of polymer aggregates. All the studied palladium carboxylate/amine complexes form bilayer lamellar structures and exhibit first-order melting transitions. The evidence presented in this study shows that the phase behavior of bivalent metal carboxylates is mainly controlled by the type of coordination of carboxylate head groups. For n-alkyl carboxylates, linear chain type aggregates replace the trimeric units of Pd acetate. In solution, in the presence of amine, palladium salt aggregates disintegrate and the Pd complex is isolated and stabilized by amine molecules. Using bis(amine) palladium carboxylate adducts as precursors, palladium nanoparticles were fabricated. During high temperature thermolysis, the bis(amine) Pd carboxylate complex decomposes to form small sized Pd nanoparticles. Combining NMR techniques with FTIR spectroscopy, it was possible to follow an original stabilization mechanism. PdNPs are stabilized by weakly interacting long chain aliphatic amide and carboxylic acid derived from the palladium precursor.

Anticancer and Antimicrobial Activity Evaluation of Cowpea-Porous-Starch-Formulated Silver Nanoparticles

Health issues involving inadequate treatment of diseases such as cancer and microbial infections continue to be the subject of much ongoing recent research. Biosynthesized silver nanoparticles (AgNPs) were characterized using Transmission Electron Microscopy (TEM), Zeta Sizer, Ultraviolet (UV), and Fourier Transform Infrared (FTIR) spectroscopy. Their antimicrobial activity was evaluated on selected Gram-positive and Gram-negative bacterial strains, using the disc diffusion and broth dilution assays. Cell viability profiles were evaluated using MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) and apoptosis studies on selected human noncancer and cancer cells. The biosynthesized AgNPs were evaluated to be spherical clusters, with sizes between 40 and 70 nm. The absorption peak at 423 nm and the presence of polyphenols confirmed the synthesis and stabilization of these tested AgNPs. The AgNPs showed a good stability of −23.9 ± 1.02 mV. Good antimicrobial activity (6.0–18.0 mm) was seen on all tested bacteria at a minimum inhibitory concentration (MIC) ranging from 5 to 16 μg/ml, with the highest activity seen against Gram-negative Escherichia coli (18 ± 0.5 mm), and the lowest activity was seen against Gram-positive Listeria monocytogenes (6.0 ± 0.4 mm) after treatment with the AgNPs. These NPs showed a concentration-dependent and cell-specific cytotoxicity with low IC50 values (41.7, 56.3, and 63.8 μg/ml). The NPs were well tolerated by tested cells as indicated by a more than 50% cell viability at the high dose tested and low apoptotic indices (<0.2). These findings indicated that these biosynthesized AgNPs showed great potential as effective antibacterial agents and anticancer drug delivery modalities.

Gold nanoparticle-mediated non-covalent functionalization of graphene for field-effect transistors

Since its discovery, graphene has attracted much attention due to its unique electrical transport properties that can be applied to high-performance field-effect transistors (FETs). However, mounting chemical functionalities onto graphene inevitably involves the breaking of sp² bonds, resulting in the degradation of the mechanical and electrical properties compared to pristine graphene. Here, we report a new strategy to chemically functionalize graphene for use in FETs without affecting the electrical performance. The key idea is to control the Fermi level of the graphene using the consecutive treatment of gold nanoparticles (AuNPs) and thiol-SAM (self-assembled monolayer) molecules, inducing positive and negative doping effects, respectively, by flipping the electric dipoles between AuNPs and SAMs. Based on this method, we demonstrate a Dirac voltage switcher on a graphene FET using heavy metal ions on functionalized graphene, where the carboxyl functional groups of the mediating SAMs efficiently form complexes with the metal ions and, as a result, the Dirac voltage can be positively shifted by different charge doping on graphene. We believe that the nanoparticle-mediated SAM functionalization of graphene can pave the way to developing high-performance chemical, environmental, and biological sensors that fully utilize the pristine properties of graphene.

Elucidating the Role of Dissolved Organic Matter and Sunlight in Mediating the Formation of Ag-Au Bimetallic Alloy Nanoparticles in the Aquatic Environment

Elucidating the interactions between metal ions and dissolved organic matter and deciphering mechanisms for their mineralization in the aquatic environment are central to understanding the speciation, transport, and toxicity of nanoparticles (NPs). Herein, we examine the interactions between Ag⁺ and Au³⁺ ions in mixed solutions (χ_Ag = 0.2, 0.5, and 0.8) in the presence of humic acids (HAs) under simulated sunlight; these conditions result in the formation of bimetallic Ag-Au NPs. A key distinction is that the obtained alloy NPs are compositionally and morphologically rather different from NPs obtained from thermally activated dark processes. Photoillumination triggers a distinctive plasmon-mediated process for HA-assisted reductive mineralization of ions to bimetallic alloy NPs which is not observed in its dark thermal reduction counterpart. The initial nucleation of bimetallic NPs is dominated by differences in the cohesive energies of Ag and Au crystal lattices, whereas the growth mechanisms are governed by the strongly preferred incorporation of Ag ions, which stems from their greater photoreactivity. The bimetallic NPs crystallize in shapes governed by the countervailing influence of minimizing free energy through the adoption of Wulff constructions and the energetic penalties associated with twin faults. As such, assessments of the stability and the potential toxic effects of bimetallic NPs arising from their possible existence in aquatic environments will depend sensitively on the origins of their formation.

Effect of structural features on the stability and bactericidal potential of two cadmium coordination polymers

Two mixed ligand Cd(ii) coordination polymers have been synthesized using three methods by in situ decarboxylation of phenylmalonic acid. CPs were screened for their antibacterial activities and the influence of structural properties was studied.

The development of a multifunctional 9,10-dibromooctadecanoic acid-encapsulated heterostructure (Ag@Ag2O) as a nanocatalyst against water toxicity

Fatty acid derivatives capped Ag@Ag₂O CSN have been easily synthesized. Comparative catalytic degradation studies against various water contaminants, MB, MO and Cr(vi) have been performed. The experimental results are in favor of CSN, compared to simple fatty acid-coated nanoparticles.

Investigation of the Physico-Chemical Properties of the Products Obtained after Mixed Organic-Inorganic Leaching of Spent Li-Ion Batteries

Lithium-ion batteries are currently one of the most important mobile energy storage units for portable electronics such as laptops, tablets, smartphones, etc. Their widespread application leads to the generation of large amounts of waste, so their recycling plays an important role in environmental policy. In this work, the process of leaching with sulfuric acid for the recovery of metals from spent Li-ion batteries in the presence of glutaric acid and hydrogen peroxide as reducing agents is presented. Experimental results indicate that glutaric-acid application improves the leaching performance compared to the use of just hydrogen peroxide under the same conditions. Obtained samples of leaching residues after mixed inorganic-organic leaching were characterized with Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, and X-ray diffraction.

Adsorption of (Phe-h5)/(Phe-d5)-substituted peptides from neurotensin family on the nanostructured surfaces of Ag and Cu: SERS studies

This work describes an application of Raman (RS) and surface-enhanced Raman scattering (SERS) to characterize the selective adsorption of two peptides belonging to the neurotensin family peptides, such as kinetensin (KN) and xenopsin-related peptide 2 (XP-2) that are known to stimulate the growth of human tumors. To perform a reliable analysis of SERS spectra, the L-Phe residue (at position 8 or 1 in the amino acid sequence of these peptides) was replaced with L-Phe-d₅ (five protons of L-phenylalanine ring substituted by deuterium). Native and (Phe-d₅)-isotopically labeled peptides were deposited on electrochemically nanostructured surfaces of Ag (AgORC) and Cu (CuORC) from an aqueous solution (H₂O). To determine the share of amide bonds in the interaction with the metallic substrate, SERS spectra of peptides adsorbed on AgORC from heavy water (D₂O) were measured. Also, to determine the effect of the C-end on the SERS spectrum, measurements were made for the KN analog in which the C-terminal L-leucine was removed ([desLeu⁹]KN). Based on the analyses of the spectral profiles, in the spectral range of 600-1650 cm^-1, specific conclusions have been drawn regarding specific aromatic ring···metal interactions and changes in the interaction during substrate change.

Synthesis, optimization and characterization of silver nanoparticles using the catkin extract of Piper longum for bactericidal effect against food-borne pathogens via conventional and mathematical approaches

Inspired with an increasing environmental awareness, we performed an eco-friendly amenable process for the synthesis of silver nanoparticles (AgNPs) using the catkins of Piper longum as an alternative approach with the existing methods of using plant extracts. The fabrication of nanoparticles occurred within 10 min. This was initially observed by colour change of the solution. UV-visible spectroscopic studies (UV-Vis) were performed for further confirmation. The analysis elucidated that the surface plasmon resonance (SPR) was specifically corresponding to AgNPs. Fourier transform infrared spectrophotometry (FTIR) studies indicated that polyphenols could possibly be the encapsulating agents. The size and shape of the nanoparticles was analysed using Transmission electron microscopy (TEM). The nanoparticles were predominant spheres ranging between 10 and 42 nm at two different scales. The formation of elemental silver was confirmed further by X-ray photoelectron spectroscopy (XPS) and X-ray powder diffraction (XRD). GC-MS analysis was used to identify the possible encapsulates on the nanoparticles. The antibacterial effect of the biosynthesized AgNPs was tested against two gram-positive (Bacillus cereus and Staphylococcus aureus), and five gram-negative (Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae, Pseudomonas aeruginosa and Salmonella typhi) bacteria. Outcomes of the study suggest that these pathogens were susceptible to the AgNPs. This is the first ever international report on correlating the antibacterial effect of silver nanoparticles using mathematical modelling with a conventional antimicrobial assay. The results indicate that nanoparticles of silver synthesized using catkin extract of P. longum can be exploited towards the development of potential antibacterial agents.

Salacia mulbarica leaf extract mediated synthesis of silver nanoparticles for antibacterial and ct-DNA damage via releasing of reactive oxygen species

In this examination, we researched the advantages of DNA fragmentation and metallic nanoparticles well-appointed with biomolecules. A novel interpretation of DNA damage by Silver Nano-Clusters (AgNCs) which were developed by the utilization of green synthesis method was demonstrated. The green synthesis of AgNCs was accomplished by utilizing the leaf extract of Salacia mulbarica (SM). The preparation of SM-AgNCs was developed by estimating surface plasmon resonance peak around 449 nm by using a UV-Visible spectrophotometer. The effect of phytochemicals in SM leaf extract on the development of stable SM-AgNCs was confirmed by FTIR spectroscopy. The size of the fabricated SM-AgNCs was estimated by dynamic light scattering and zeta-sizer analysis and the morphology of the SM-AgNCs was examined by transmission electron microscopy. The presence of clusters of Ag particles in the prepared SM-AgNCs was recognized by energy dispersion X-ray analysis. The results show that saponins, phytosterols, and phenolic compounds present in plant extract may play a great part in developing the SM-AgNCs in their specialized particles. The succeeded SM-AgNCs shows incredible anti-bacterial action towards Escherichia coli and Bacillus subtilis. In-light of the antibacterial study, these SM-AgNCs were analyzed with calf thymus-DNA and found significant damage to the strand of thymus-DNA.

Silver nanoparticle-base lateral flow immunoassay for rapid detection of Staphylococcal enterotoxin B in milk and honey

A silver nanoparticle (AgNP)-based sandwich-type lateral flow immunoassay (LFIA) was evaluated for rapid detection of Staphylococcal enterotoxin B (SEB) in milk and honey. The role of trisodium citrate dihydrate (TSC) in the formation of Ag/TSC nanoparticles was established using UV-Vis spectroscopy. The association of silver with TSC in Ag/TSC nanoparticles was studied by the decrease in the intensity of anodic peak potential at 0.47 V and shift to 0.30 V in cyclic voltammetry (CV). The morphological, compositional and interaction studies of the AgNPs conjugated with the anti-SEB polyclonal antibody (Ag-sAb) was established using transmission electron microscopy (TEM) and X-ray photo electron spectroscopy (XPS) measurements. The visible detection limit and optical detection limit of the SEB test strip were 0.5 and 0.125 ppm, respectively, in SEB standard solution. This assay showed no cross-reaction with Staphylococcal enterotoxin A, Staphylococcal enterotoxin C or Salmonella typhi. Finally, the SEB test strip was effectively applied for the detection of SEB in spiked liquid milk and viscous honey, with optical detection limits of 0.25 and 0.5 ppm, respectively.

Novel self-nanoemulsifying drug-delivery system enhances antileukemic properties of all-trans retinoic acid

Aim: All- trans retinoic acid (ATRA) shows erratic oral bioavailability when administered orally against leukemia, which can be solved through its incorporation in self-nanoemulsifying drug-delivery systems (SEDDS). The SEDDS developed contained a hydrophobic ion pair between benzathine (BZT) and ATRA and was enriched with tocotrienols by the input of a palm oil tocotrienol rich fraction (TRF) in its composition. Results: SEDDS-TRF-ATRA-BZT allowed the formation of emulsions with nanometric size that retained ATRA within their core after dispersion. Pharmacokinetic parameters after oral administration of SEDDS-TRF-ATRA-BZT in mice were improved compared with what was seen for an ATRA solution. Moreover, SEDDS-TRF-ATRA-BZT had improved activity against HL-60 cells compared with SEDDS without TRF. Conclusion: SEDDS-TRF-ATRA-BZT is a promising therapeutic choice over ATRA conventional medicine.

Antibacterial Screening of Gunnera perpensa-Mediated Silver Nanoparticles

The biosynthesis of nanoparticles has become quite popular and has been proposed as an alternative over the tedious, expensive, and toxic physical and chemical methods of synthesis due to its cost-effectiveness and ecofriendliness. This study involved the biosynthesis, characterization, and evaluation of the antibacterial activity of Gunnera perpensa-mediated AgNPs. Biosynthesized AgNPs were characterized using TEM, UV, and FTIR spectroscopy. The antimicrobial activity was evaluated in six bacterial strains, using the disc diffusion assay, and MIC was determined using the broth dilution assay. All NPs generally presented as spherical clusters, with sizes ranging from 13 to 24 nm, as determined by TEM. The absorption peaks ranging between 421 and 425 nm and the presence of the C=O bond with amine groups, as indicated by UV and FTIR spectra, confirmed the synthesis and stabilization of G. perpensa extract-mediated AgNPs. Good antimicrobial activity ranging from 7.0 to 9.0 mm was exhibited by both preparations of G. perpensa extract-mediated AgNPs against both Gram-positive and Gram-negative studied bacteria, at MIC ranging from 3.2 to 12.5 μg/ml. Overall, good antibacterial activity was achieved at lower doses with both preparations of the G. perpensa-mediated AgNPs against all tested bacterial strains, suggesting G. perpensa-mediated AgNPs as good antimicrobial agents.

Effect of electrical discharge plasma on cytotoxicity against cancer cells of N,O-carboxymethyl chitosan-stabilized gold nanoparticles

Electrical discharge plasma in a liquid phase can generate reactive species, e.g. hydroxyl radical, leading to rapid reactions including degradation of biopolymers. In this study, the effect of plasma treatment time on physical properties and cytotoxicity against cancer cells of N,O-carboxymethyl chitosan-stabilized gold nanoparticles (CMC-AuNPs) was investigated. AuNPs were synthesized by chemical reduction of HAuCl₄ in 2 % CMC solution to obtain CMC-AuNPs, before being subjected to the plasma treatment. Results showed that the plasma treatment not only led to the reduction of hydrodynamic diameters of CMC-AuNPs from 400 nm to less than 100 nm by the plasma-induced degradation of CMC but also provided the narrow size distribution of AuNPs having diameters in the range of 2-50 nm, that were existing in CMC-AuNPs. In addition, the plasma-treated CMC-AuNPs could significantly reduce the percentage of cell viability of breast cancer cells by approximately 80 % compared to the original CMC and CMC-AuNPs.

Nanoformulation of C-18 long fatty acid-capped silver nanoparticles with exploration of photocatalytic and antibacterial activities

C-18 fatty acid-coated silver nanoparticles are synthesized using a facile and worthwhile chemical method.

Electrodeposition of hydroxyapatite coating on Mg alloy modified with organic acid self-assembled monolayers

Calcium phosphate coatings are used in orthopedics due to their excellent bioactivity, which improves the bonding between the metal implant and the bone. The use of self-assembling monolayers of long-chain organic acids can induce calcium phosphate growth. In this article, the self-assembling monolayers of stearic acid and octadecylphosphonic acid formed on the Mg alloy surface were additionally modified with electrodeposited hydroxyapatite coating to increase the bioactivity and biocompatibility of the Mg alloy in a physiological solution. Hydroxyapatite coating was prepared by a two-step reaction: hydrogen phosphate formed by electrodeposition at constant potential was converted into hydroxyapatite coating through an acid–base reaction. The results obtained by voltammetry and electrochemical impedance spectroscopy have shown a beneficial effect of organic acid self-assembling monolayer and especially of organic acid self-assembling monolayer modification by hydroxyapatite electrodeposition on the corrosion properties of Mg alloy in physiological solution. Fourier transform infrared spectroscopy and scanning electron microscopy were used to verify the existence of the organic acid SAM|HAp film on the Mg alloy surface and their morphology.

Vertical flow paper-based plasmonic device for cysteine detection

Cystinuria, is an autosomal recessive genetic disorder involving increasingly high levels of poorly soluble cysteine in urine leading to formation of stones. Developing a facile, low-cost, point-of-care and selective sensor for diagnosis of cysteine is imperative. Accordingly, for the detection of cysteine, the present study demonstrates an inexpensive colorimetric, paper-based vertical flow plasmonic micro-well device with a two-minute turn-around time. The method encompasses the use of microbially-synthesized silver nanoparticles (AgNPs) that change from light brown / yellow to dark brown upon binding with Sulphur present in cysteine. This technique allows for visual detection up to 1 × 10^-5 mM cysteine and can be easily offered as a rapid diagnostic test even at setups with minimal resources.

Interactions between silver nanoparticles and other metal nanoparticles under environmentally relevant conditions: A review

Global production of engineered nanoparticles (ENPs) continues to increase due to the demand of enabling properties in consumer products and industrial applications. Release of individual or aggregates of ENPs have been shown to interact with one another subsequently resulting in adverse biological effects. This review focuses on silver nanoparticles (AgNPs), which are currently used in numerous applications, including but not limited to antibacterial action. Consequently, the release of AgNPs into the aquatic environment, the dissociation into ions, the binding to organic matter, reactions with other metal-based materials, and disruption of normal biological and ecological processes at the cellular level are all potential negative effects of AgNPs usage. The potential sources of AgNPs includes leaching of intact particles from consumer products, disposal of waste from industrial processes, intentional release into contaminated waters, and the natural formation of AgNPs in surface and ground water. Formation of natural AgNPs is greatly influenced by different chemical parameters including: pH, oxygen levels, and the presence of organic matter, which results in AgNPs that are stable for several months. Both engineered and natural AgNPs can interact with metal and metal oxide particles/nanoparticles. However, information on the chemical and toxicological interactions between AgNPs and other nanoparticles is limited. We have presented current knowledge on the interactions of AgNPs with gold nanoparticles (AuNPs) and titanium dioxide nanoparticles (TiO₂ NPs). The interaction between AgNPs and AuNPs result in stable bimetallic Ag-Au alloy NPs. Whereas the interaction of AgNPs with TiO₂ NPs under dark and light conditions results in the release of Ag⁺ ions, which may be subsequently converted back into AgNPs and adsorb on TiO₂ NPs. The potential chemical mechanisms and toxic effects of AgNPs with AuNPs and TiO₂ NPs are discussed within this review and show that further investigation is warranted.

Stabilization of Ag-Au Bimetallic Nanocrystals in Aquatic Environments Mediated by Dissolved Organic Matter: A Mechanistic Perspective

Gold and silver nanoparticles can be stabilized endogenously within aquatic environments from dissolved ionic species as a result of mineralization induced by dissolved organic matter. However, the ability of fulvic and humic acids to stabilize bimetallic nanoparticles is entirely unexplored. Elucidating the formation of such particles is imperative given their potential ecological toxicity. Herein, we demonstrate the nucleation, growth, and stabilization of bimetallic Ag-Au nanocrystals from the interactions of Ag⁺ and Au³⁺ with Suwannee River fulvic and humic acids. The mechanisms underpinning the stabilization of Ag-Au alloy NPs at different pH (6.0-9.0) values are studied by UV-vis spectrophotometry, X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED). Complexation of free Ag⁺ and Au³⁺ ions with the Lewis basic groups (carbonyls, carboxyls, and thiols) of FA and HA, followed by electron-transfer from redox-active moieties present in dissolved organic matter initiates the nucleation of the NPs. Alloy formation and interdiffusion of Au and Ag atoms are further facilitated by a galvanic replacement reaction between AuCl₄^- and Ag. Charge-transfer from Au to Ag stabilizes the formed bimetallic NPs. A more pronounced agglomeration of the Ag-Au NPs is observed when HA is used compared to FA as the reducing agent. The bimetallic NPs are stable for greater than four months, which suggests the possible persistence and dispersion of these materials in aquatic environments. The mechanistic ideas have broad generalizability to reductive mineralization processes mediated by dissolved organic matter.

Enhanced Photocatalytic Activity of TiO2 Nanoparticles Supported on Electrically Polarized Hydroxyapatite

Fast recombination of photogenerated charge carriers in titanium dioxide (TiO₂) remains a challenging issue, limiting the photocatalytic activity. This study demonstrates increased photocatalytic performance of TiO₂ nanoparticles supported on electrically polarized hydroxyapatite (HA) films. Dense and thermally stable yttrium and fluorine co-doped HA films with giant internal polarization were synthesized as photocatalyst supports. TiO₂ nanoparticles deposited on the support were then used to catalyze the photochemical reduction of aqueous silver ions to produce silver nanoparticles. It was found that significantly more silver nanoparticles were produced on polarized HA supports than on depolarized HA supports. In addition, the photodegradation of methyl orange with TiO₂ nanoparticles on polarized HA supports was found to be much faster than with TiO₂ nanoparticles on depolarized HA supports. It is proposed that separation of photogenerated electrons and holes in TiO nanoparticles is promoted by the internal polarization of the HA support, and consequently, the recombination of charge carriers is mitigated. The results imply that materials with large internal polarization can be used in strategies for enhancing quantum efficiency of photocatalysts.