The Application of Electrostatic Dry Powder Deposition Technology to Coat Drug-Eluting Stents

Encapsulation of the Anti-inflammatory Dual FLAP/sEH Inhibitor Diflapolin Improves the Efficiency in Human Whole Blood

Diflapolin is a dual FLAP/sEH inhibitor with potent anti-inflammatory efficiency in cellular assays and experimental in vivo studies. Despite these outstanding characteristics, its high lipophilicity and plasma protein binding hamper the bioactivity in blood. To overcome these limitations, diflapolin was encapsulated in poly(lactic-co-glycolic acid) nanoparticles to develop an efficient and biocompatible drug delivery system. Two different cosolvent approaches were tested showing the possibility to exchange dimethyl sulfoxide in the organic phase by the sustainable 400 g/mol poly(ethylene glycol). A particle size of 220 nm and the amorphous encapsulation of diflapolin in high amounts rendered the nanoparticles appropriate for the intended application. Excellent biocompatibility of the nanoparticles was demonstrated in an ex ovo hen's egg model. The potent suppression of FLAP-dependent 5-lipoxygenase product formation by the nanoparticles in human whole blood, superior to the free drug, makes them to a promising drug delivery system to improve the bioactivity of diflapolin.

Nanoparticle-Mediated Blocking of Excessive Inflammation for Prevention of Heart Failure Following Myocardial Infarction

Severe cardiac damage following myocardial infarction (MI) causes excessive inflammation, which sustains tissue damage and often induces adverse cardiac remodeling toward cardiac function impairment and heart failure. Timely resolution of post-MI inflammation may prevent cardiac remodeling and development of heart failure. Cell therapy approaches for MI are time-consuming and costly, and have shown marginal efficacy in clinical trials. Here, nanoparticles targeting the immune system to attenuate excessive inflammation in infarcted myocardium are presented. Liposomal nanoparticles loaded with MI antigens and rapamycin (L-Ag/R) enable effective induction of tolerogenic dendritic cells presenting the antigens and subsequent induction of antigen-specific regulatory T cells (Tregs). Impressively, intradermal injection of L-Ag/R into acute MI mice attenuates inflammation in the myocardium by inducing Tregs and an inflammatory-to-reparative macrophage polarization, inhibits adverse cardiac remodeling, and improves cardiac function. Nanoparticle-mediated blocking of excessive inflammation in infarcted myocardium may be an effective intervention to prevent the development of post-MI heart failure.

Influence of Drug Incorporation on the Physico-Chemical Properties of Poly(l-Lactide) Implant Coating Matrices-A Systematic Study

Local drug delivery has become indispensable in biomedical engineering with stents being ideal carrier platforms. While local drug release is superior to systemic administration in many fields, the incorporation of drugs into polymers may influence the physico-chemical properties of said matrix. This is of particular relevance as minimally invasive implantation is frequently accompanied by mechanical stresses on the implant and coating. Thus, drug incorporation into polymers may result in a susceptibility to potentially life-threatening implant failure. We investigated spray-coated poly-l-lactide (PLLA)/drug blends using thermal measurements (DSC) and tensile tests to determine the influence of selected drugs, namely sirolimus, paclitaxel, dexamethasone, and cyclosporine A, on the physico-chemical properties of the polymer. For all drugs and PLLA/drug ratios, an increase in tensile strength was observed. As for sirolimus and dexamethasone, PLLA/drug mixed phase systems were identified by shifted drug melting peaks at 200 °C and 240 °C, respectively, whereas paclitaxel and dexamethasone led to cold crystallization. Cyclosporine A did not affect matrix thermal properties. Altogether, our data provide a contribution towards an understanding of the complex interaction between PLLA and different drugs. Our results hold implications regarding the necessity of target-oriented thermal treatment to ensure the shelf life and performance of stent coatings.

Drug-Eluting Stents and Balloons-Materials, Structure Designs, and Coating Techniques: A Review

Controlled drug delivery is a matter of interest to numerous scientists from various domains, as well as an essential issue for society as a whole. In the treatment of many diseases, it is crucial to control the dosing of a drug for a long time and thus maintain its optimal concentration in the tissue. Heart diseases are particularly important in this aspect. One such disease is an obstructive arterial disease affecting millions of people around the world. In recent years, stents and balloon catheters have reached a significant position in the treatment of this condition. Balloon catheters are also successfully used to manage tear ducts, paranasal sinuses, or salivary glands disorders. Modern technology is continually striving to improve the results of previous generations of stents and balloon catheters by refining their design, structure, and constituent materials. These advances result in the development of both successive models of drug-eluting stents (DES) and drug-eluting balloons (DEB). This paper presents milestones in the development of DES and DEB, which are a significant option in the treatment of coronary artery diseases. This report reviews the works related to achievements in construction designs and materials, as well as preparation technologies, of DES and DEB. Special attention was paid to the polymeric biodegradable materials used in the production of the above-mentioned devices. Information was also collected on the various methods of producing drug release coatings and their effectiveness in releasing the active substance.

Properties of rapamycin solid lipid nanoparticles for lymphatic access through the lungs & part II: the effect of nanoparticle charge

Aim: Lymphangioleiomyomatosis is characterized by smooth muscle-like cells in the lungs that spread to other organs via lymphatic vessels. Oral rapamycin is restricted by low bioavailability approximately 15%. The aim of the present study is to systematically investigate the effect of inhaled rapamycin solid lipid nanoparticles (Rapa-SLN) surface charge on efficacy and penetration into the lymphatics. Materials & methods: Rapa-SLN formulations with different charge: neutral, positive and negative, were produced and assessed for their physicochemical particle characteristics and efficacy in vitro. Results: Negative Rapa-SLNs were significantly faster at entering the lymphatic endothelium and more potent at inhibiting lymphanigiogenesis compared with neutral and positive Rapa-SLNs. Conclusion: Negative Rapa-SLNs showed efficient lymphatic access and should therefore be investigated further as a treatment for targeting extrapulmonary lymphangioleiomyomatosis.

Protective Layer Development for Enhancing Stability and Drug-Delivery Capabilities of DES Surface-Crystallized Coatings

Carrier-free drug-eluting stents (DES)-based crystalline coatings are gaining prominence because of their function, skipping many limitations and clinical complications of the currently marketed DES. However, their usage has been humbled by inflexibility of the crystalline coating and limited mechanical and physical properties. This study reports for the first time the development of a protective top coating for enhancing the merits and delivery capabilities of the crystalline coating. Flexible and water-soluble polysaccharide top coating was developed and applied onto rapamycin (RM) crystalline carpet. The top coating prevented crystalline coating delamination during stent crimping and expansion without affecting its release profile. Crystalline coating strata and its interfaces with the metallic substrate and top coating were fully studied and characterized. The crystalline top-coated stents showed significant physical, mechanical, and chemical stability enhancement with ∼2% RM degradation after 1 year under different storage conditions. Biocompatibility study of the top-coated stents implanted subcutaneously for 1 month into SD rats did not provoke any safety concerns. Incorporating RM into the top coating to develop a bioactive protective coating for multilayer release purposes was also investigated. The developed protective coating had wide applicability and may be further implemented for various drugs and implantable medical devices.

The Effect of Fluid Shear Stress on the In Vitro Release Kinetics of Sirolimus from PLGA Films

Drug-carrying coatings of stents implanted in blood vessels are exposed to various blood flows. This study investigated the effect of fluid shear stress on the in vitro release kinetics of sirolimus from poly(lactic-co-glycolic acid) (PLGA) films. The homemade parallel plate flow chamber was used to exert quantitative shear stress on the sirolimus-carrying film. By adjusting the flow rate of the release media in the chamber, three levels of shear stress (3.6, 12.0, and 36.0 dyn/cm²) were respectively applied. For each level of shear stress employed, the release kinetics of sirolimus from the PLGA films exhibited a four-phase profile: an initial burst release phase (Phase I), a lag phase (Phase II), a second burst release phase (Phase III), and a terminal release phase (Phase IV). During Phases I and II, sirolimus was released slowly and in small amounts (<10%); however, during Phases III and IV, the drug release increased considerably. Comparisons of different shear stresses indicated that greater shear stress resulted in earlier and faster sirolimus release, with more cumulative drug release observed. PLGA film degradations (molecular weight reduction, mass loss, and surface topographical variations) were also investigated to better explain the observed drug release behavior. Consequently, fluid shear stress was found to significantly accelerate the release of sirolimus from the PLGA matrices. Therefore, this study could provide a practical method for evaluating the in vitro drug release from polymer matrices under uniform shear stress, and might help improve the design of biodegradable coatings on drug-eluting stents.

Preformulation Studies of a Liposomal Formulation Containing Sirolimus for the Treatment of Dry Eye Disease

PURPOSE

The aim of this study was to develop and characterize a liposomal product containing sirolimus to be administered subconjunctivally for the treatment of nonresponsive keratoconjunctivitis sicca (KCS) or dry eye.

METHODS

Formulations were prepared using an ethanol injection method and an adaptation of the heating method in pursuance of the most suitable methodology for future industrial production. Liposomes were loaded with either a high dose of 1 mg/mL of sirolimus or a less toxic dose of 0.4 mg/mL. The effects of critical process and formulation parameters were investigated. Liposomes were characterized in terms of size, zeta potential, polydispersity, differential scanning calorimetry, morphology, entrapment efficiency, phospholipid content, thermal stability, and sterility. The formulation was evaluated clinically in dogs with spontaneous KCS.

RESULTS

Sterile liposomal dispersions with sizes ranging from 140 to 211 nm, were successfully obtained. High entrapment efficiency of 93%-98% was achieved. The heating method allowed an easier production of liposomes with high entrapment efficiency, to significantly shorten production time and the elimination of the use of alcohol. The poor stability of the obtained liposomes in aqueous dispersion made the inclusion of a lyophilization step necessary to the manufacturing process. In vivo testing of the liposomal sirolimus formulations in the spontaneous KCS dog model have produced promising results, particularly with a sirolimus dose of 1 mg/mL, indicating the need for further development and study of proposed formulations in the treatment of canine KCS. Clinical improvement in tear production in dogs with spontaneous KCS treated with the 1 mg/mL dose product was observed.

CONCLUSIONS

The heating method allowed easier production of high entrapment efficiency liposomes to significantly shorten production time and the elimination of the use of alcohol. Tear production was increased in dogs administered with the formulation.

Coating Techniques and Release Kinetics of Drug-Eluting Stents

Implantation of drug-eluting stents (DESs) via percutaneous coronary intervention is the most popular treatment option to restore blood flow to occluded vasculature. The many devices currently used in clinic and under examination in research laboratories are manufactured using a variety of coating techniques to create the incorporated drug release platforms. These coating techniques offer various benefits including ease of use, expense of equipment, and design variability. This review paper discusses recent novel DES designs utilizing individual or a combination of these coating techniques and their resulting drug release profiles.

Controlled Slow-Release Drug-Eluting Stents for the Prevention of Coronary Restenosis: Recent Progress and Future Prospects

Drug-eluting stents (DES) have become more widely used by cardiologists than bare metal stents (BMS) because of their better ability to control restenosis. However, recognized negative events, particularly including delayed or incomplete endothelialization and late stent thrombosis, have caused concerns over the long-term safety of DES. Although stent-based drug delivery can facilitate a drug's release directly to the restenosis site, a burst of drug release can seriously affect the pharmacological action and is a major factor accounting for adverse effects. Therefore, the drug release rate has become an important criterion in evaluating DES. The factors affecting the drug release rate include the drug carrier, drug, coating methods, drug storage, elution direction, coating thickness, pore size in the coating, release conditions (release medium, pH value, temperature), and hemodynamics after the stent implantation. A better understanding of how these factors influence drug release is particularly important for the reasonable use of efficient control strategies for drug release. This review summarizes the factors influencing the drug release from DES and presents strategies for enhancing the control of the drug's release, including the stent design, the application of absorbable stents, the development of new polymers, and the application of nanocarriers and improvements in the coating technology. Therefore, this paper provides a reference for the preparation of novel controlled slow-release DES.