Preparation of TPP-crosslinked chitosan microparticles by spray drying for the controlled delivery of progesterone intended for estrus synchronization in cattle

Nanoparticles-Based Delivery Systems for Salicylic Acid as Plant Growth Stimulator and Stress Alleviation

The population growth tendency leads to an increase in demand for food products, and in particular, products obtained from the processing of plants. However, there are issues of biotic and abiotic stresses that can significantly reduce crop yields and escalate the food crisis. Therefore, in recent years, the development of new methods of plant protection became an important task. One of the most promising ways to protect plants is to treat them with various phytohormones. Salicylic acid (SA) is one of the regulators of systemic acquired resistance (SAR) signaling pathways. These mechanisms are able to protect plants from biotic and abiotic stresses by increasing the expression of genes that encode antioxidant enzymes. However, salicylic acid in high doses can act as an antagonist and have the negative rebound effect of inhibition of plant growth and development. To maintain optimal SA concentrations in the long term, it is necessary to develop systems for the delivery and slow release of SA in plants. The purpose of this review is to summarize and study methods of delivery and controlled release of SA in a plant. Various carriers-based nanoparticles (NPs) synthesized from both organic and inorganic compounds, their chemical structure, impacts on plants, advantages, and disadvantages are comprehensively discussed. The mechanisms of controlled release of SA and the effects of the use of the considered composites on the growth and development of plants are also described. The present review will be helpful to design or fabricate NPs and NPs-based delivery systems for salicylic acid-controlled release and better understating of the mechanism of SA-NPs interaction to alleviate stress on plants.

Methods for crosslinking and stabilization of chitosan structures for potential medical applications

Chitosan is a well-known polymer widely used in tissue engineering and regenerative medicine. It is biocompatible, biodegradable, non-toxic, has antibacterial and osteoconductive properties. Chitosan is often used in the form of composites (with the participation of ceramic particles), membranes, hydrogels or nanoparticles. The problem with biomaterials is their low durability, rapid degradation, poor mechanical properties and cytotoxicity. Cross-linking or stabilization of such materials allows for solving these problems. It is important that the compounds used for this purpose exhibit limited or no toxicity. The presented article is a review and presents some methods of cross-linking/stabilization of chitosan structures. The analysis concerns low or non-cytotoxic cross-linking/stabilization methods. The discussed compounds used for the purpose of chitosan structure fixation are: cinnamaldehyde, genipin, L-aspartic acid, vanillin, sodium carbonate, sodium alginate, BGP, ethanol and TPP. There is discussed also a hydrothermal/dehydrothermal method which seems to be promising as it is more advantageous since no additional compounds are introduced into the structure.

Nanotechnology and Reproductive Management of Farm Animals: Challenges and Advances

Reproductive efficiency of farm animals has central consequences on productivity and profitability of livestock farming systems. Optimal reproductive management is based on applying different strategies, including biological, hormonal, nutritional strategies, as well as reproductive disease control. These strategies should not only guarantee sufficient reproductive outcomes but should also comply with practical and ethical aspects. For example, the efficiency of the biological- and hormonal-based reproductive strategies is mainly related to several biological factors and physiological status of animals, and of nutritional strategies, additional factors, such as digestion and absorption, can contribute. In addition, the management of reproductive-related diseases is challenged by the concerns regarding the intensive use of antibiotics and the development of antimicrobial resistant strains. The emergence of nanotechnology applications in livestock farming systems may present innovative and new solutions for overcoming reproductive management challenges. Many drugs (hormones and antibiotics), biological molecules, and nutrients can acquire novel physicochemical properties using nanotechnology; the main ones are improved bioavailability, higher cellular uptake, controlled sustained release, and lower toxicity compared with ordinary forms. In this review, we illustrate advances in the most common reproductive management strategies by applying nanotechnology, considering the current challenges of each strategy.

Development of Chitosan Microspheres through a Green Dual Crosslinking Strategy Based on Tripolyphosphate and Vanillin

Microencapsulation procedures have recently focused attention on designing novel microspheres via green synthesis strategies. The use of chitosan (CS) as an encapsulating material has increased interest due to its unique bioactive properties and the various crosslinking possibilities offered by their functional groups. The consolidation of the microspheres by physical crosslinking using sodium tripolyphosphate (TPP) combined with chemical crosslinking using vanillin (VA) open new opportunities in the framework of green dual crosslinking strategies. The developed strategy, a straightforward technique based on an aqueous medium avoiding complex separation/washing steps, offers advantages over the processes based on VA, mostly using water-in-oil emulsion approaches. Thus, in this work, the combination of TPP crosslinking (3, 5, and 10 wt.%) via spray-coagulation technique with two VA crosslinking methods (in situ and post-treatment using 1 wt.% VA) were employed in the preparation of microspheres. The microspheres were characterized concerning morphology, particle size, physicochemical properties, thermal stability, and swelling behavior. Results revealed that the combination of 5 wt.% TPP with in situ VA crosslinking led to microspheres with promising properties, being an attractive alternative for natural bioactives encapsulation due to the green connotations associated with the process.

Microencapsulation of Copper(II) Sulfate in Ionically Cross-Linked Chitosan by Spray Drying for the Development of Irreversible Moisture Indicators in Paper Packaging

Copper(II) sulfate-loaded chitosan microparticles were herein prepared using ionic cross-linking with sodium tripolyphosphate (STPP) followed by spray drying. The microencapsulation process was optimal using an inlet temperature of 180 °C, a liquid flow-rate of 290 mL/h, an aspiration rate of 90%, and an atomizing gas flow-rate of 667 nL/h. Chitosan particles containing copper(II) sulfate of approximately 4 µm with a shrunken-type morphology were efficiently attained and, thereafter, fixated on a paper substrate either via cross-linking with STPP or using a chitosan hydrogel. The latter method led to the most promising system since it was performed at milder conditions and the original paper quality was preserved. The developed cellulose substrates were reduced and then exposed to different humidity conditions and characterized using colorimetric measurements in order to ascertain their potential as irreversible indicators for moisture detection. The results showed that the papers coated with the copper(II) sulfate-containing chitosan microparticles were successfully able to detect ambient moisture shown by the color changes of the coatings from dark brown to blue, which can be easily seen with the naked eye. Furthermore, the chitosan microparticles yielded no cytotoxicity in an in vitro cell culture experiment. Therefore, the cellulose substrates herein developed hold great promise in paper packaging as on-package colorimetric indicators for monitoring moisture in real time.

State-of-the-Art and Prospective of Nanotechnologies for Smart Reproductive Management of Farm Animals

Many biotechnological assisted reproductive techniques (ART) are currently used to control the reproductive processes of farm animals. Nowadays, smart ART that considers technique efficiency, animal welfare, cost efficiency and environmental health are developed. Recently, the nanotechnology revolution has pervaded all scientific fields including the reproduction of farm animals, facilitating certain improvements in this field. Nanotechnology could be used to improve and overcome many technical obstacles that face different ART. For example, semen purification and semen preservation processes have been developed using different nanomaterials and techniques, to obtain semen doses with high sperm quality. Additionally, nanodrugs delivery could be applied to fabricate several sex hormones (steroids or gonadotrophins) used in the manipulation of the reproductive cycle. Nanofabricated hormones have new specific biological properties, increasing their bioavailability. Applying nanodrugs delivery techniques allow a reduction in hormone dose and improves hormone kinetics in animal body, because of protection from natural biological barriers (e.g., enzymatic degradation). Additionally, biodegradable nanomaterials could be used to fabricate hormone-loaded devices that are made from non-degradable materials, such as silicon and polyvinyl chloride-based matrixes, which negatively impact environmental health. This review discusses the role of nanotechnology in developing some ART outcomes applied in the livestock sector, meeting the concept of smart production.

Gentamicin decorated phosphatidylcholine-chitosan nanoparticles against biofilms and intracellular bacteria

Biofilms and intracellular bacteria often cause a series of overwhelming public health issues due to their strong drug resistance. Hence, chitosan nanoparticles (CS NPs), phosphatidylcholine and gentamicin were used to synthesize a novel nanodrug delivery system (GPC NPs). Dynamic light scattering (DLS) demonstrated that the surface zeta-potential of GPC NPs was -19.5 mV. The morphology of GPC NPs was observed by scanning electron microscopy (SEM). The gentamicin adsorption and release behaviors of GPC NPs were also investigated. The GPC NPs could effectively damage and remove the biofilm formed by pathogens through permeation of the antibiotic into the biofilm. In addition, the nanoparticles were readily engulfed by macrophages which facilitated the killing of intracellular bacteria and had neglectable cytotoxicity. Our study indicated that GPC NPs could be used as a promising nanoantibacterial agent against biofilms and intracellular bacteria.

Design and evaluation of a recyclable intravaginal device made of ethylene vinyl acetate copolymer for bovine estrus synchronization

In bovine estrus synchronization, intravaginal devices made of silicone are used to administer exogenous progesterone with the aim of maintain plasmatic levels above 2 ng ml^-1 during the treatment. After their use, devices must be discarded. There is an important concern on the environmental impact of the disposal of these used products due mainly to the non-degradability of the silicone and to the residual content of the hormone. Different alternatives are being studied, and the use of ecological materials appears as the more important. The objective of the present contribution was to design and evaluate a recyclable intravaginal prototype using ethylene vinyl acetate copolymer (EVA). Devices were fabricated by an injection-molding technique and characterized in terms of dimensions, loading efficiency, release rate, and wing tension. An analysis was first conducted to compare three different matrices and two supports. Secondly, the best candidate prototype was assayed in both beef and dairy cattle. Finally, used matrices were recycled measuring the progesterone content in the resulting devices and testing them in vitro. According to release tests, no differences were observed between the three matrices both in vitro and in vivo. On the contrary, a better performance was achieved when a support with a more flexible Y shape was used in comparison with a rigid T geometry. Successful results were observed in non-lactating cows, with plasma concentrations above the threshold value defined for the synchronization therapy. However, lower progesterone levels resulted when devices were tested in animals with large milk production. By last, recycled matrices presented a similar initial content and in vitro release rate than original matrices. These findings could open the possibility to use recyclable EVA devices as an alternative to the non-degradable silicone intravaginal inserts. Future research must be carried out to optimize the performance of the recycled matrices in dairy cattle. Modifications of the release surface and/or the initial loading can give a solution to the lower values observed in these animals. Graphical abstract.

Ionically Crosslinked Chitosan Membranes Used as Drug Carriers for Cancer Therapy Application

The aim of this paper was to prepare, by the freeze-drying method, ionically crosslinked chitosan membranes with different contents of pentasodium tripolyphosphate (TPP) and loaded with 1,4-naphthoquinone (NQ14) drug, in order to evaluate how the physical crosslinking affects NQ14 release from chitosan membranes for cancer therapy application. The membranes were characterized by Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM), swelling degree, and through in vitro drug release and cytotoxicity studies. According to the results, the molecular structure, porosity and hydrophilicity of the chitosan membranes were affected by TPP concentration and, consequently, the NQ14 drug release behavior from the membranes was also affected. The release of NQ14 from crosslinked chitosan membranes decreased when the cross-linker TPP quantity increased. Thus, depending on the TPP amount, the crosslinked chitosan membranes would be a potential delivery system to control the release of NQ14 for cancer therapy application. Lastly, the inhibitory potential of chitosan membranes ionically crosslinked with TPP and loaded with NQ14 against the B16F10 melanoma cell line was confirmed through in vitro cytotoxicity studies assessed via MTT assay. The anti-proliferative effect of prepared membranes was directly related to the amount of cross-linker and among all membranes prepared, such that one crosslinked with 0.3% of TPP may become a potential delivery system for releasing NQ14 drug for cancer therapy.

Salicylic acid loaded chitosan microparticles applied to lettuce seedlings: Recycling shrimp fishing industry waste

Shrimp fishing industry wastes are still a main problem with high environmental impact worldwide. In this study, chitosan with ultra-high molecular weight and deacetylation degree ≥85% was obtained from shrimp fishing industry waste from Argentinean Patagonia. Chitosan based microparticles capable to entrap salicylic acid, a phytohormone known to play major role in the regulation of plant defense response against various pathogens, were prepared using TPP as crosslinker. Unloaded microparticles and microparticles loading several salicylic acid amount were fully characterized exhibiting a size between 1.57 μm and 2.45 μm. Furthermore, a good PDI, entrappment efficiencies from 59% to 98% and salicylic acid sustained release over 24 h were achieved. Chitosan based microparticles were non toxic in most of the doses applied in lettuce seedlings. Instead, microparticles can positively modulate plant growth and have the potential to improve plant defense responses. In particular salicylic acid loaded microparticles effect was very promising for its application as activators of salicylic acid dependent plant defense responses in lettuce as a model of horticultural plant species.