Supported Au/MIL-53(Al): a reusable green solid catalyst for the three-component coupling reaction of aldehyde, alkyne, and amine

Supported metals on porous solids as heterogeneous catalysts for the synthesis of propargylamines

This perspective summarizes recent developments in the synthesis of propargylamines using porous solids (zeolites, MOFs and carbon) as supports/catalysts.

Heterogeneous activation of peroxymonosulfate by cobalt-doped MIL-53(Al) for efficient tetracycline degradation in water: Coexistence of radical and non-radical reactions

Compared with the transition metal induced homogeneous catalytic system, the heterogeneous catalytic system based on transition metal-doped metal organic frameworks (MOFs) were stable for the efficient utilization of transition metal and avoiding the metal leaching. The aim of this work is to synthesize Co-doped MIL-53(Al) by one-step solvent thermal method and use it to activate peroxymonosulfate (PMS) to remove tetracycline (TC) in water. The successful synthesis of Co-MIL-53(Al) samples was demonstrated by XDR, SEM and FTIR characterizations. The 25% Co-MIL-53(Al)/PMS system showed the optimal TC removal effect compared to the PMS alone and MIL-53(Al)/PMS system. The catalytic performances of Co-MIL-53(Al)/PMS system in conditions of different pH, co-existing substances and water bodies were investigated. Quenching experiment and electron paramagnetic resonance (EPR) showed that the degradation mechanism by Co-MIL-53(Al) activation PMS was mainly attributed to sulfate radical (SO₄^•-) and singlet oxygen (¹O₂) non-radical. The degradation intermediates of TC were also identified and the possible degradation pathways were proposed. Co-MIL-53(Al) showed good activity after four cycles. These findings demonstrated that Co-MIL-53(Al) can be a promising heterogeneous catalyst for activating PMS to degrade TC.

Bimetallic Au–Pd alloy nanoparticles supported on MIL-101(Cr) as highly efficient catalysts for selective hydrogenation of 1,3-butadiene

Gold–palladium (Au–Pd) bimetallic nanoparticle (NP) catalysts supported on MIL-101(Cr) with Au : Pd mole ratios ranging from 1 : 3 to 3 : 1 were prepared through coimpregnation and H₂ reduction. Au–Pd NPs were homogeneously distributed on the MIL-101(Cr) with mean particle sizes of 5.6 nm. EDS and XPS analyses showed that bimetallic Au–Pd alloys were formed in the Au(2)Pd(1)/MIL-101(Cr). The catalytic performance of the catalysts was explored in the selective 1,3-butadiene hydrogenation at 30–80 °C on a continuous fixed bed flow quartz reactor. The bimetallic Au–Pd alloy particles stabilized by MIL-101(Cr) presented improved catalytic performance. The as-synthesized bimetallic Au(2)Pd(1)/MIL-101(Cr) with 2 : 1 Au : Pd mole ratio showed the best balance between the activity and butene selectivity in the selective 1,3-butadiene hydrogenation. The Au–Pd bimetallic-supported catalysts can be reused in at least three runs. The work affords a reference on the utilization of a MOF and alloy nanoparticles to develop high-efficiency catalysts.

Bimetallic Au–Pd alloy particles stabilized by MIL-101(Cr) showed high activity and butene selectivity for 1,3-butadiene hydrogenation reaction.

Heterogeneous Bimetallic Cu–Ni Nanoparticle-Supported Catalysts in the Selective Oxidation of Benzyl Alcohol to Benzaldehyde

Three bimetallic Cu–Ni nanoparticle-supported catalysts were synthesized by co-immobilization followed by H2 reduction. A chromium(III) terephthalate metal organic framework (MIL-101), titanium dioxide (TiO2), and carbon (C) with different properties (acidity and Brunauer–Emmett–Teller surface area) were selected as supports for studying the effect of the support nature on the catalytic activity and selectivity in the oxidation of benzyl alcohol. The physicochemical properties of the Cu–Ni-supported catalysts were characterized by XRD, NH3-TPD, nitrogen adsorption/desorption, TEM, EDS, XPS, and ICP-OES. Bimetallic Cu–Ni nanoparticles were highly dispersed on the support. The catalytic activities of CuNi/MIL-101, CuNi/TiO2, and CuNi/C were tested in the selective oxidation of benzyl alcohol to benzaldehyde in the presence of molecular oxygen under mild reaction conditions. The highest benzaldehyde yields were achieved with CuNi/TiO2, CuNi/MIL-101, and CuNi/C catalysts at 100 °C within 4 h under 5, 3, and 3 bar of O2, respectively. The bimetallic Cu–Ni-supported catalysts possessed two types of catalytic active sites: acid sites and bimetallic Cu–Ni nanoparticles. The CuNi/MIL-101 catalyst possessed a high number of acid sites and exhibited high yield during selective benzyl alcohol oxidation to benzaldehyde. Importantly, the catalysts exhibited a high functional group (electron-donating and electron-withdrawing groups) tolerance. Cu–Ni-supported catalysts with an Cu:Ni mole ratio of 1:1 exhibited the highest yield of 47% for the selective oxidation of benzyl alcohol to benzaldehyde. Reusability and leaching experiment results exhibited that CuNi/MIL-101 showed better stability than CuNi/TiO2 and CuNi/C catalysts due to the large porous cavities of MIL-101 support; these cavities can be used to trap bimetallic Cu–Ni nanoparticles and inhibit nanoparticle leaching.

Immobilized Gold Nanoparticles Prepared from Gold(III)-Containing Ionic Liquids on Silica: Application to the Sustainable Synthesis of Propargylamines

A cycloaurated phosphinothioic amide gold(III) complex was supported on amorphous silica with the aid of an imidazolium ionic liquid (IL) physisorbed in the SiO₂ pores (SiO₂⁻IL) and covalently bonded to the SiO₂ (SiO₂@IL). Gold(0) nanoparticles (AuNPs) were formed in situ and subsequently immobilized on the SiO₂⁻IL/SiO₂@IL phase. The resulting catalytic systems Au⁻SiO₂⁻IL and Au⁻SiO₂@IL promoted the solvent-free A³ coupling reaction of alkynes, aldehydes, and amines in high yields under solvent-free conditions with very low catalyst loading and without the use of additives. The Au⁻SiO₂@IL catalyst showed good recyclability and could be reused at least five times with yields of propargylamines of ≥80%. This synthetic method provides a green and low cost way to effectively prepare propargylamines. Additionally, 31P high resolution magic angle spinning (HRMAS) NMR spectroscopy is introduced as a simple technique to establish the Au loading of the catalyst.

Bimetallic Gold-Silver Nanoparticles Supported on Zeolitic Imidazolate Framework-8 as Highly Active Heterogenous Catalysts for Selective Oxidation of Benzyl Alcohol into Benzaldehyde

The metal-organic zeolite imidazolate framework-8 (ZIF-8) supported gold-silver bimetallic catalysts with a core-shell structure (Au@Ag/ZIF-8 and Ag@Au/ZIF-8) and cluster structure (AuAg/ZIF-8) were successfully prepared by the deposition-redispersion method. Energy dispersive X-ray spectroscopy (EDS) elemental mapping images displayed that in the Au@Ag/ZIF-8 catalyst, Ag atoms were deposited on an exposed Au surface, and core-shell structured Au@Ag particles with highly dispersed Ag as the shell were formed. Additionally, the XPS investigation at gold 4f levels and silver 3d levels indicated that the Au and Ag particles of Au@Ag/ZIF-8, Ag@Au/ZIF-8, and AuAg/ZIF-8 were in a zero valence state. Among the resultant catalysts obtained in this study, Ag@Au/ZIF-8 catalysts showed the highest catalytic activity for the selective oxidation of benzyl alcohol, followed by AuAg/ZIF-8 and Au@Ag/ZIF-8. The turnover frequency (TOF) values were in the order of Ag@Au/ZIF-8 (28.2 h-1) > AuAg/ZIF-8 (25.0 h-1) > Au@Ag/ZIF-8 (20.0 h-1) at 130 °C within 1 h under 8 bar O₂ when using THF as solvent. The catalysts of Au@Ag/ZIF-8 and Ag@Au/ZIF-8 with core⁻shell structures have higher benzaldehyde selectivities (53.0% and 53.3%) than the AuAg/ZIF-8 catalyst (35.2%) in the selective oxidation of benzyl alcohol into benzaldehyde. The effect of the solvent, reaction temperature, reaction time, and reaction pressure on benzyl alcohol conversion and benzaldehyde selectivity in benzyl alcohol selective oxidation over Au@Ag/ZIF-8, Ag@Au/ZIF-8, and AuAg/ZIF-8 were also investigated. All of the catalysts showed excellent performance at 130 °C under 8 bar O₂ within 1 h when using THF as the solvent in the selective oxidation of benzyl alcohol to benzaldehyde. Moreover, the catalysts can be easily recycled and used repetitively at least four times.

Anchorage of Au3+ into Modified Isoreticular Metal-Organic Framework-3 as a Heterogeneous Catalyst for the Synthesis of Propargylamines

Postsynthetic modification of metal-organic framework is a general and practical approach to access MOF-based catalysts bearing multiple active sites. The isoreticular metal-organic framework-3 (IRMOF-3) was modified with lactic acid through condensation reaction of the carboxyl group of lactic acid and amino group present in IRMOF-3 frameworks. Au3+ was subsequently anchored onto the metal-organic framework IRMOF-3 using postsynthetic modification. The synthezized IRMOF-3-LA-Au (LA = lactic acid) was characterized by powder X-ray diffraction, N2 adsorption-desorption, infrared spectroscopy, liquid-state nuclear magnetic resonance, thermogravimetric analysis, H2-temperature programmed reduction, transmission electro microscopy, and inductively coupled plasma-optical emission spectrometry. IRMOF-3-LA-Au acted as an efficient heterogeneous catalyst in the synthesis of propargylamines by three-component coupling reaction of aldehyde, alkyne, and amine. Moreover, the catalyst is applicable to various substituted substrates, including aromatic and aliphatic aldehydes, alkyl- and aryl-substituted terminal alkynes, and alicyclic amines. In addition, the catalyst can be easily separated from the mixture and can be reused for four consecutive cycles.

Au3+/Au⁰ Supported on Chromium(III) Terephthalate Metal Organic Framework (MIL-101) as an Efficient Heterogeneous Catalystfor Three-Component Coupling Synthesis of Propargylamines

Post-synthesis modification is a useful method for the functionalization of metal–organic frameworks (MOFs). A novel catalyst Au@MIL-101-ED-SA (ED = ethylenediamine, SA = salicylaldehyde), containing coexisting Au³⁺ ions and Au⁰ nanoparticles, was prepared successfully by post-synthesis modification with ethylenediamine, salicylaldehyde and gold. Gold nanoparticles supported on MIL-101 (Au@MIL-101) were prepared successfully by the impregnation method. Au@MIL-101-ED-SA and Au@MIL-101 were characterized by N₂ adsorption–desorption, X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, and inductively coupled plasma-optical emission spectrometry. Au@MIL-101-ED-SA and Au@MIL-101 were applied as environmentally friendly catalysts in the three-component coupling reaction of aldehydes, amines, and alkynes for the preparation of diverse propargylamines. Au@MIL-101-ED-SA contained a fraction of cationic gold (Au³⁺/Au⁰ = 0.9) and showed higher catalytic activity than Au@MIL-101, which was prepared by the impregnation method. Furthermore, the reactions were performed under heterogeneous conditions and the novel catalyst was successfully recycled for four consecutive runs.

Magnetically recoverable graphene-based nanocomposite material as an efficient catalyst for the synthesis of propargylamines via A3 coupling reaction

The magnetically separable Au NPs–Fe₃O₄–rGO catalyst provides a robust and efficient route for the A³ coupling reaction of secondary amines, terminal alkynes and aldehyde with tolerance of diverse functional groups for the synthesis of propargylamine in high yields.