Acid–base characterization of heterogeneous catalysts: an up-to-date overview

Simulation of Binder Jetting and Analysis of Magnesium Alloy Bonding Mechanism

Binder jetting (3DP) is a kind of additive manufacturing at room temperature and atmospheric environment, which can reduce the risk of magnesium alloy forming. Magnesium alloy powder is bonded to a certain structure by a binder, so the appropriate binder is very important in 3DP. In this study, according to the characteristics of magnesium alloy, a simple and easy-to-obtain water-based low-molecular alcohol binder was used to reduce the difficulty of magnesium alloy 3DP. Additionally, we use COMSOL Multiphysics simulation software to establish a simulation model of the movement and deposition process of the binder. The results show that the increase in jet velocity will increase the quality and saturation of droplets. More importantly, the larger the jet velocity is, the larger the spreading width of the binder droplet after impacting the powder bed, which seriously affects the dimensional accuracy of the green part. In addition, lower binder saturation will weaken the formation of interparticle bonding neck and cannot form a stable structure. Furthermore, we analyzed the bond reactants of the binder and magnesium alloy powder, which eventually decompose into MgO, and the experimental results show that the final sintered sample has considerable performance.

Surface Chemistry of Biologically Active Reducible Oxide Nanozymes

Reducible metal oxide nanozymes (rNZs) are a subject of intense recent interest due to their catalytic nature, ease of synthesis, and complex surface character. Such materials contain surface sites which facilitate enzyme-mimetic reactions via substrate coordination and redox cycling. Further, these surface reactive sites are shown to be highly sensitive to stresses within the nanomaterial lattice, the physicochemical environment, and to processing conditions occurring as part of their syntheses. When administered in vivo, a complex protein corona binds to the surface, redefining its biological identity and subsequent interactions within the biological system. Catalytic activities of rNZs each deliver a differing impact on protein corona formation, its composition, and in turn, their recognition, and internalization by host cells. Improving the understanding of the precise principles that dominate rNZ surface-biomolecule adsorption raises the question of whether designer rNZs can be engineered to prevent corona formation, or indeed to produce "custom" protein coronas applied either in vitro, and preadministration, or formed immediately upon their exposure to body fluids. Here, fundamental surface chemistry processes and their implications in rNZ material performance are considered. In particular, material structures which inform component adsorption from the application environment, including substrates for enzyme-mimetic reactions are discussed.

High-Selectivity Laminated Gas Sensor Based on Characteristic Peak under Temperature Modulation

Aiming at the bottleneck problem of insufficient selectivity of metal oxide gas sensors, a reliable scheme to improve selectivity is proposed, that is, a laminated sensor structure of a gas-sensitive membrane plus catalytic membrane combined with the temperature modulation technology. It is presented as a highly selective ethanol sensor as an example for verification. The laminated gas sensor is made of Sr@SnO2 as the gas-sensing membrane and ZSM-5 as the catalytic membrane by the microelectro mechanical system. The results indicate that in temperature modulation mode, the Sr@SnO2/ZSM-5-laminated sensor has good resistance gas-sensing response to most different types of gases but only shows a characteristic peak on the time-resistance and temperature-resistance curves of ethanol gas response. By defining and calculating this characteristic peak, the selectivity of ethanol gas response signal is improved. The Sr@SnO2/ZSM-5 sensor also exhibits high sensitivity to ethanol gas at the parts per billion level, fast response/recovery time in seconds, excellent anti-interference, and stability, indicating the reliability and practicality of this highly selective scheme. This scheme is of great significance for the study of high selectivity of a metal oxide gas sensor and promotes its wide application.

Investigation of Brønsted acidity in zeolites through adsorbates with diverse proton affinities

Understanding the adsorption behavior of base probes in aluminosilicates and its relationship to the intrinsic acidity of Brønsted acid sites (BAS) is essential for the catalytic applications of these materials. In this study, we investigated the adsorption properties of base probe molecules with varying proton affinities (acetonitrile, acetone, formamide, and ammonia) within six different aluminosilicate frameworks (FAU, CHA, IFR, MOR, FER, and TON). An important objective was to propose a robust criterion for evaluating the intrinsic BAS acidity (i.e., state of BAS deprotonation). Based on the bond order conservation principle, the changes in the covalent bond between the aluminum and oxygen carrying the proton provide a good description of the BAS deprotonation state. The ammonia and formamide adsorption cause BAS deprotonation and cannot be used to assess intrinsic BAS acidity. The transition from ion-pair formation, specifically conjugated acid/base interaction, in formamide to strong hydrogen bonding in acetone occurs within a narrow range of base proton affinities (812-822 kJ mol^-1). The adsorption of acetonitrile results in the formation of hydrogen-bonded complexes, which exhibit a deprotonation state that follows a similar trend to the deprotonation induced by acetone. This allows for a semi-quantitative comparison of the acidity strengths of BAS within and between the different aluminosilicate frameworks.

ZrP2O7 as a Cathodic Material in Single-Chamber MFC for Bioenergy Production

The present work is the first investigation of the electrocatalytic performances of ZrP₂O₇ as a cathode in a single-chamber Microbial Fuel Cell (MFC) for the conversion of chemical energy from wastewater to bioelectricity. This catalyst was prepared by a coprecipitation method, then characterized by X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), ultraviolet-visible-near-infrared spectrophotometry (UV-Vis-NIR), and cyclic voltammetry analyses. The acid-basic characteristics of the surface were probed by using 2-butanol decomposition. The conversion of 2-butanol occurs essentially through the dehydrating reaction, indicating the predominantly acidic character of the solid. The electrochemical test shows that the studied cathode material is electroactive. In addition, the ZrP₂O₇ in the MFC configuration exhibited high performance in terms of bioelectricity generation, giving a maximum output power density of around 449 mW m^-2; moreover, it was active for wastewater treatment, reducing the chemical oxygen demand (COD) charge to 50% after three days of reaction.

Developing Benign Ni/g-C3N4 Catalysts for CO2 Hydrogenation: Activity and Toxicity Study

This research discusses the CO₂ valorization via hydrogenation over the non-noble metal clusters of Ni and Cu supported on graphitic carbon nitride (g-C₃N₄). The Ni and Cu catalysts were characterized by conventional techniques including XRD, AFM, ATR, Raman imaging, and TPR and were tested via the hydrogenation of CO₂ at 1 bar. The transition-metal-based catalyst designed with atom-economy principles presents stable activity and good conversions for the studied processes. At 1 bar, the rise in operating temperature during CO₂ hydrogenation increases the CO₂ conversion and the selectivity for CO and decreases the selectivity for methanol on Cu/CN catalysts. For the Ni/CN catalyst, the selectivity to light hydrocarbons, such as CH₄, also increased with rising temperature. At 623 K, the conversion attained ca. 20%, with CH₄ being the primary product of the reaction (CH₄ yield >80%). Above 700 K, the Ni/CN activity increases, reaching almost equilibrium values, although the Ni loading in Ni/CN is lower by more than 90% compared to the reference NiREF catalyst. The presented data offer a better understanding of the effect of the transition metals’ small metal cluster and their coordination and stabilization within g-C₃N₄, contributing to the rational hybrid catalyst design with a less-toxic impact on the environment and health. Bare g-C₃N₄ is shown as a good support candidate for atom-economy-designed catalysts for hydrogenation application. In addition, cytotoxicity to the keratinocyte human HaCaT cell line revealed that low concentrations of catalysts particles (to 6.25 μg mL^–1) did not cause degenerative changes.

The interplay between acid-base properties and Fermi level pinning of a nano dispersed tungsten oxide - titania catalytic system

A series of WO₃/TiO₂ catalysts were synthesized, characterized, and evaluated for the NO selective catalytic reduction (SCR) with NH₃. Based on a wide range of characterization techniques, a detailed model was developed that describes the interfacial electron transfer between WO₃ and TiO₂ and defines a relationship between the acid-base properties of the catalytic surface and electronic structure modification. The electronic interactions at the WO₃/TiO₂ interface were quantified using variations in the system's electronic structure. Altering the dispersion and size of the WO₃ nanostructures results to drastic changes in titania's surface electron distribution, which are reflected in the pinning of Fermi level through an electron transfer process between WO₃ and TiO₂. The variations in the Fermi level were further related to changes in the point of zero charge (PZC) values and the activity towards NO SCR with NH_3, which was used as a test reaction. Temperature Programmed Surface Reaction (TPSR) was employed to study the catalytic activity at temperatures ranging from 30 °C to 500 °C and was quantitatively correlated to changes in coverage and interfacial charge transfer. We demonstrate that higher WO₃ loading on TiO₂ results in a stronger electronic interaction and a higher catalytic activity. This is because electron transfer increases the surface electron density, which enhances the surface basicity of TiO₂. The concomitant decrease in the adsorption energy of NH₃ results in a decrease in the activation energy, which is reflected in the SCR temperature onset.

Handheld Device for Selective Benzene Sensing over Toluene and Xylene

More than 1 million workers are exposed routinely to carcinogenic benzene, contained in various consumer products (e.g., gasoline, rubbers, and dyes) and released from combustion of organics (e.g., tobacco). Despite strict limits (e.g., 50 parts per billion (ppb) in the European Union), routine monitoring of benzene is rarely done since low-cost sensors lack accuracy. This work presents a compact, battery-driven device that detects benzene in gas mixtures with unprecedented selectivity (>200) over inorganics, ketones, aldehydes, alcohols, and even challenging toluene and xylene. This can be attributed to strong Lewis acid sites on a packed bed of catalytic WO₃ nanoparticles that prescreen a chemoresistive Pd/SnO₂ sensor. That way, benzene is detected down to 13 ppb with superior robustness to relative humidity (RH, 10-80%), fulfilling the strictest legal limits. As proof of concept, benzene is quantified in indoor air in good agreement (R² ≥ 0.94) with mass spectrometry. This device is readily applicable for personal exposure assessment and can assist the implementation of low-emission zones for sustainable environments.

4-Dialkylamino-2,5-dihydroimidazol-1-oxyls with Functional Groups at the Position 2 and at the Exocyclic Nitrogen: The pH-Sensitive Spin Labels

Local acidity and electrostatic interactions are associated both with catalytic properties and the adsorption activity of various materials, and with the vital functions of biomolecules. The observation of acid–base equilibria in stable free radicals using EPR spectroscopy represents a convenient method for monitoring pH changes and the investigation of surface electrostatics, the advantages of which are especially evident in opaque and turbid samples and in porous materials such as xerogels. Imidazoline nitroxides are the most commonly used pH-sensitive spin probes and labels due to the high sensitivity of the parameters of the EPR spectra to pH changes, their small size, and their well-developed chemistry. In this work, several new derivatives of 4-(N,N-dialkylamino)-2,5-dihydrioimidazol-1-oxyl, with functional groups suitable for specific binding, were synthesized. The dependence of the parameters of their EPR spectra on pH was studied. Several showed a pK_a close to 7.4, following the pH changes in a normal physiological range, and some demonstrated a monotonous change of the hyperfine coupling constant by 0.14 mT upon pH variation by four units.

Phosphate Enrichment of Niobium-Based Catalytic Surfaces in Relation to Reactions of Carbohydrate Biomass Conversion: The Case Studies of Inulin Hydrolysis and Fructose Dehydration

In this work, some physical mixtures of Nb2O5·nH2O and NbOPO4 were prepared to study the role of phosphate groups in the total acidity of samples and in two reactions involving carbohydrate biomass: hydrolysis of polyfructane and dehydration of fructose/glucose to 5-hydroxymethylfurfural (HMF). The acid and catalytic properties of the mixtures were dominated by the phosphate group enrichment. Lewis and Brønsted acid sites were detected by FT-IR experiments with pyridine adsorption/desorption under dry and wet conditions. Lewis acidity decreased with NbP in the composition, while total acidity of the samples, measured by titrations with phenylethylamine in cyclohexane (~3.5 μeq m−2) and water (~2.7 μeq m−2), maintained almost the same values. Inulin conversion took advantage of the presence of surfaces rich in Brønsted sites, and NbOPO4 showed the best hydrolysis activity with glucose/fructose formation. The catalyst with a more phosphated surface showed less deactivation during the dehydration of fructose/glucose into HMF.

Acidic and Electrosurface Properties of Binary TiO2-SiO2 Xerogels Using EPR of pH-Sensitive Nitroxides

The binary xerogels TiO2-SiO2 are widely used as catalysts and their carriers in organic synthesis. Characterization and adjustment of the electrostatic properties of the surface and the local acidity inside the pores, are necessary for the further development of TiO2-SiO2 xerogels applications. This research investigates acid-base equilibria in the pores, and the surface electrostatic potential (SEP) of binary TiO2-SiO2 xerogels, by the EPR of stable pH-sensitive nitroxide radicals. These radicals are small enough to penetrate directly into the pores, and to be adsorbed onto the surface of the material under study. This makes it possible to obtain valuable information on the acidic and electrosurface properties of the studied system. The highest negative surface electrical charge associated with surface electrical potential (SEP) was equal to -196 ± 6 mV. It was induced by the surface of the sample with a 7% TiO2 content. The local acidity inside the pores of this sample was found to be higher, by approximately 1.49 pH units, as compared to that in the external bulk solution.

CO2 Hydrogenation to Methane over Ni-Catalysts: The Effect of Support and Vanadia Promoting

Within the Waste2Fuel project, innovative, high-performance, and cost-effective fuel production methods are developed to target the “closed carbon cycle”. The catalysts supported on different metal oxides were characterized by XRD, XPS, Raman, UV-Vis, temperature-programmed techniques; then, they were tested in CO2 hydrogenation at 1 bar. Moreover, the V2O5 promotion was studied for Ni/Al2O3 catalyst. The precisely designed hydrotalcite-derived catalyst and vanadia-promoted Ni-catalysts deliver exceptional conversions for the studied processes, presenting high durability and selectivity, outperforming the best-known catalysts. The equilibrium conversion was reached at temperatures around 623 K, with the primary product of reaction CH4 (>97% CH4 yield). Although the Ni loading in hydrotalcite-derived NiWP is lower by more than 40%, compared to reference NiR catalyst and available commercial samples, the activity increases for this sample, reaching almost equilibrium values (GHSV = 1.2 × 104 h–1, 1 atm, and 293 K).

Progress on Modified Calcium Oxide Derived Waste-Shell Catalysts for Biodiesel Production

The dwindling of global petroleum deposits and worsening environmental issues have triggered researchers to find an alternative energy such as biodiesel. Biodiesel can be produced via transesterification of vegetable oil or animal fat with alcohol in the presence of a catalyst. A heterogeneous catalyst at an economical price has been studied widely for biodiesel production. It was noted that various types of natural waste shell are a potential calcium resource for generation of bio-based CaO, with comparable chemical characteristics, that greatly enhance the transesterification activity. However, CaO catalyzed transesterification is limited in its stability and studies have shown deterioration of catalytic reactivity when the catalyst is reused for several cycles. For this reason, different approaches are reviewed in the present study, which focuses on modification of waste-shell derived CaO based catalyst with the aim of better transesterification reactivity and high reusability of the catalyst for biodiesel production. The catalyst stability and leaching profile of the modified waste shell derived CaO is discussed. In addition, a critical discussion of the structure, composition of the waste shell, mechanism of CaO catalyzed reaction, recent progress in biodiesel reactor systems and challenges in the industrial sector are also included in this review.

Oxidative coupling of bio-alcohols mixture over hierarchically porous perovskite catalysts for sustainable acrolein production

The acrolein production from bio-alcohols methanol and ethanol mixtures using AMnO₃ (since A = Ba and/or Sr) perovskite catalysts was studied. All the prepared samples were characterized by XRD, XPS, N₂ sorption, FTIR, Raman spectroscopy, TEM, SEM, TGA, and NH₃–CO₂-TPD. The catalytic oxidation reaction to produce acrolein has occurred via two steps, the alcohols are firstly oxidized to corresponding aldehydes, and then the aldol is coupled with the produced aldehydes. The prepared perovskite samples were modified by doping A (Sr) position with (Ba) to improve the aldol condensation. The most catalytic performance was achieved using the BaSrMnO₃ sample in which the acrolein selectivity reached 62% (T = 300 °C, MetOH/EtOH = 1, LHSV = 10 h⁻¹). The increase in acrolein production may be related to the high tendency of BaSrMnO₃ toward C–C coupling formation. The C–C tendency attributes to that modification have occurred in acid/base sites because of metal substitution.

The figure illustrates the potential of perovskite as a catalyst for acrolein production via simultaneous oxidative coupling of renewable alcohols (ethanol and methanol) followed by aldol condensation of pre-formed aldehydes to form acrolein.

An Eco-Friendly Fluidizable FexOy/CaO-γ-Al2O3 Catalyst for Tar Cracking during Biomass Gasification

The present study deals with the development, characterization, and performance evaluation of an eco-friendly catalyst, using 2-methoxy-4-methylphenol (2M4MP) as a surrogate tar. The 2M4MP was selected due to its chemical functionalities and the fact that it is a good model compound to represent the tar formed during biomass low temperature gasification. The eco-friendly catalyst was prepared using the typical Fe and Ca minerals which are present in ash. These ash components were added to a fluidizable γ-Al2O3 support using a multistep incipient impregnation, yielding Fe oxides as an active phase and CaO as the promoter. The prepared catalyst displayed a 120 m2/g BET specific surface area, with few γ-Al2O3 bulk phase changes, as observed with XRD. TPD-NH3 and pyridine FTIR allowed us to show the significant influence of CaO reduced support acidity. A TPR analysis provided evidence of catalyst stability during consecutive reduction–oxidation cycles. Furthermore, catalyst evaluation vis-à-vis catalytic steam 2M4MP gasification was performed using the fluidized CREC riser simulator. The obtained results confirm the high performance of the developed catalyst, with 2M4MP conversion being close to 100% and with selectivities of up to 98.6% for C1-C2 carbon-containing species, at 500 °C, with a 7.5 s reaction time and 1.5 g steam/g 2M4MP. These high tar conversions are promising efficiency indicators for alumina catalysts doped with Fe and Ca. In addition, the used catalyst particles could be blended with biochar to provide an integrated solid supplement that could return valuable mineral supplements to the soil.

Efficient synthesis of novel pyrazole-linked 1,2,4-triazolidine-3-thiones using bismuth on zirconium oxide as a recyclable catalyst in aqueous medium

The Bi₂O₃ loading on ZrO₂ as heterogeneous catalyst was established as an extremely efficient catalyst for the synthesis of a series of novel 5-(1-(2,4-dinitrophenyl)-3-substituted-phenyl-1H-pyrazol-4-yl)-1,2,4-triazolidine-3-thione derivatives (3a-o) with high yields (90-96%) by reaction of 1-(2,4-dinitrophenyl)-3-substituted-phenyl-1H-pyrazole-4-carbaldehydes and thiosemicarbazide using water as a greener solvent at 80 °C within 30-45 min. Materials with different percentages of Bi₂O₃ on ZrO₂ were prepared by simple wet impregnation method. The synthesized material has been characterized by various techniques (XRD, TEM, SEM, BET). 2.5% Bi₂O₃/ZrO₂ proved superior catalyst. The Bi₂O₃/ZrO₂ catalyst is easily recoverable and reused up to sixth run with no loss of activity. Excellent yields, short reaction time, avoidance of hazardous solvents, and no need for chromatographic purifications are the proven advantages.

Metal-Support Cooperative Effects in Au/VPO for the Aerobic Oxidation of Benzyl Alcohol to Benzyl Benzoate

This paper studies the cooperative effect of Au nanoparticles deposited on vanadyl pyrophosphate oxide (VPO) in the liquid phase oxidation of benzyl alcohol. VPO was prepared using the classical method by thermally treating VOHPO₄·0.5H₂O precursor in reacting atmosphere at 420 °C for a period of 72 h. Au nanoparticles were deposited by incipient wetness method. The catalysts were characterized by means of XRD, TEM, XPS and Raman. The bulk VPO catalyst contains vanadyl pyrophosphate phase ((VO)₂P₂O₇), and a small amount of VOPO₄. The catalytic system exhibits a high activity in the base-free liquid phase oxidation of alcohols compared to Au on activated carbon, classic catalyst used for this type of reaction. Au/VPO showed a high peculiar selectivity to benzyl benzoate (76%), an important product used in the pharmaceutical and perfume industries. This behavior might be ascribed to the presence of strong acid sites of VPO, as determined by liquid phase titration. Stability tests performed on Au/VPO showed a deactivation of 10% after the first run, but a constant conversion along the following five cycles. This phenomenon can be attributed to the increase of mean Au particle size (from 19.1 to 23.4 nm) after recycling tests as well as the partial leaching of Au and V in the reaction media. Moreover, XRD evidenced a modification in the VPO structure with the partial formation of VOHPO₄·0.5H₂O phase.

Nb2O5 supported on mixed oxides catalyzed oxidative and photochemical conversion of anilines to azoxybenzenes

Supported niobium oxide as an efficient heterogeneous catalyst for chemoselective preparation of azoxybenzenes from anilines.

Ag₂O on ZrO₂ as a Recyclable Catalyst for Multicomponent Synthesis of Indenopyrimidine Derivatives

We describe the synthesis of silver loaded on zirconia and its use as an efficient catalyst for a one-pot three-component reaction to synthesize 11 indenopyrimidine derivatives, of which 7 are new compounds. The procedure involves substituted benzaldehydes, indane-1,3-dione, and guanidinium hydrochloride, with ethanol as solvent. The proposed green protocol at room temperature is simple and efficient, giving excellent yields (90⁻96%) in short reaction times (<30 min). The protocol works well according to the green chemistry principles with respect to high atom economy, no need for column separation, and reusability of the catalyst, which are attractive features. XRD, TEM, SEM, and BET analysis were used to characterize the catalyst materials.

A Systematic Study of Isomorphically Substituted H-MAlPO-5 Materials for the Methanol-to-Hydrocarbons Reaction

Substituting metals for either aluminum or phosphorus in crystalline, microporous aluminophosphates creates Brønsted acid sites, which are well known to catalyze several key reactions, including the methanol to hydrocarbons (MTH) reaction. In this work, we synthesized a series of metal-substituted aluminophosphates with AFI topology that differed primarily in their acid strength and that spanned a predicted range from high Brønsted acidity (H-MgAlPO-5, H-CoAlPO-5, and H-ZnAlPO-5) to medium acidity (H-SAPO-5) and low acidity (H-TiAlPO-5 and H-ZrAlPO-5). The synthesis was aimed to produce materials with homogenous properties (e.g. morphology, crystallite size, acid-site density, and surface area) to isolate the influence of metal substitution. This was verified by extensive characterization. The materials were tested in the MTH reaction at 450 °C by using dimethyl ether (DME) as feed. A clear activity difference was found, for which the predicted stronger acids converted DME significantly faster than the medium and weak Brønsted acidic materials. Furthermore, the stronger Brønsted acids (Mg, Co and Zn) produced more light alkenes than the weaker acids. The weaker acids, especially H-SAPO-5, produced more aromatics and alkanes, which indicates that the relative rates of competing reactions change upon decreasing the acid strength.