A density functional study of oxygen vacancy formation on α-Fe2O3(0001) surface and the effect of supported Au nanoparticles

Understanding and optimizing the sensitization of anatase titanium dioxide surface with hematite clusters

The presence of hematite (Fe2O3) clusters at low coverage on titanium dioxide (TiO2) surface has been observed to enhance photocatalytic activity, while excess loading of hematite is detrimental. We conduct a comprehensive density functional theory study of Fe2O3clusters adsorbed on the anatase TiO2(101) surface to investigate the effect of Fe2O3on TiO2. Our study shows that TiO2exhibits improved photocatalytic properties with hematite clusters at low coverage, as evidenced by a systematic study conducted by increasing the number of cluster adsorbates. The adsorption of the clusters generates impurity states in the band gap improving light absorption and consequently affecting the charge transfer dynamics. Furthermore, the presence of hematite clusters enhances the activity of TiO2in the hydrogen evolution reaction. The Fe valence mixing present in some clusters leads to a significant increase in H2evolution rate compared with the fixed +3 valence of Fe in hematite. We also investigate the effect of oxygen defects and find extensive modifications in the electronic properties and local magnetism of the TiO2-Fe2O3system, demonstrating the wide-ranging effect of oxygen defects in the combined system.

Synergistic Effect in Ag/Fe–MnO2 Catalysts for Ethanol Oxidation

Here we report the synergistic effect of OMS-2 catalysts tested in ethanol oxidation, and the effects produced by both the addition of an Fe modifier in the catalyst preparation stage, and the introduction of Ag on its surface by the impregnation method. To analyze the action of each component, the Fe-modified, Ag-containing OMS-2 catalysts with different Mn/Fe ratios were prepared. Combined XPS and XRF elemental analysis confirms the states and distribution of the Ag- and Fe-containing species between the surface and bulk of the OMS-2 catalysts, which form highly dispersed Ag species on the surface of 0.05Fe–OMS-2, and are also incorporated into the OMS-2 crystalline lattice. The cooperative action of Ag and Fe modifiers improves both reoxidation ability (TPO results) and the amount of adsorbed oxygen species on the catalyst surface. The introduction of Ag to the OMS-2 and 0.05 Fe–OMS-2 surface allows a high level of activity (T80 = 150–155 °C) and selectivity (SAc80 = 93%) towards the acetaldehyde formation.

Synthesis of CeO2-Fe2O3 Mixed Oxides for Low-Temperature Carbon Monoxide Oxidation

In this study, the CeO2-Fe2O3 mixed oxide catalysts have been prepared by combustion method using gel-created tartaric acid. The ability of effective carbon monoxide (CO) oxidation to carbon dioxide (CO2) by CeO2-Fe2O3 catalyst under low-temperature conditions was also demonstrated. The calcined CeO2-Fe2O3 material has a porous honeycomb structure and good gaseous absorption-desorption ability. The solid solution of CeO2-Fe2O3 mixed oxides was formed by the substitution of Fe+3 ions at some Ce4+ ion sites within the CeO2 crystal lattice. The results also showed that the calcination temperature and the molar ratio of Ce3+ ions to Fe3+ ions (CF) affected the formation of the structural phase and the catalytic efficiency. The catalytic properties of the CeO2-Fe2O3 mixed oxide were good at the CF ratio of 1 : 1, the average crystal size was near 70 nm, and the specific surface area was about 20.22 m2.g-1. The full conversion of CO into CO2 has been accomplished at a relatively low temperature of 270 °C under insufficient O2 conditions.

DFT study on the electronic structure and optical properties of an Au-deposited α-Fe2O3 (001) surface

The electronic structure and optical properties of gold clusters deposited on an α-Fe2O3 surface were studied by using density functional theory (DFT), with a special emphasis on the influence of Au cluster sizes. There is a strong interaction between Au clusters and the α-Fe2O3 surface, and the binding energy increases with an increase of Au cluster size. The Au atoms of the gold cluster are bonded to the iron atoms of the α-Fe2O3 surface for the Au/α-Fe2O3 system, and the electrons transfer from the Au cluster to the α-Fe2O3 surface with the largest number of electrons transferred for 4Au/α-Fe2O3. The peaks of the refractive index, extinction coefficient and dielectric function induced by Au clusters appear in the visible range, which results in the enhanced optical absorption for the Au/α-Fe2O3 system. The optical absorption intensifies with increasing Au cluster size in the visible range, showing a maximum value for 4Au/α-Fe2O3. Further increasing the Au cluster size above 4Au results in a decrease in absorption intensity. The results are in good agreement with those of the refractive index, extinction coefficient and dielectric function.

Surface Density Dependent Catalytic Activity of Single Palladium Atoms Supported on Ceria*

The analogy between single-atom catalysts (SACs) and molecular catalysts predicts that the specific catalytic activity of these systems is constant. We provide evidence that this prediction is not necessarily true. As a case in point, we show that the specific activity over ceria-supported single Pd atoms linearly increases with metal atom density, originating from the cumulative enhancement of CeO₂ reducibility. The long-range electrostatic footprints (≈1.5 nm) around each Pd site overlap with each other as surface Pd density increases, resulting in an observed deviation from constant specific activity. These cooperative effects exhaust previously active O atoms above a certain Pd density, leading to their permanent removal and a consequent drop in reaction rate. The findings of our combined experimental and computational study show that the specific catalytic activity of reducible oxide-supported single-atom catalysts can be tuned by varying the surface density of single metal atoms.

Role of the Support in Gold-Containing Nanoparticles as Heterogeneous Catalysts

In this review, we discuss selected examples from recent literature on the role of the support on directing the nanostructures of Au-based monometallic and bimetallic nanoparticles. The role of support is then discussed in relation to the catalytic properties of Au-based monometallic and bimetallic nanoparticles using different gas phase and liquid phase reactions. The reactions discussed include CO oxidation, aerobic oxidation of monohydric and polyhydric alcohols, selective hydrogenation of alkynes, hydrogenation of nitroaromatics, CO₂ hydrogenation, C–C coupling, and methane oxidation. Only studies where the role of support has been explicitly studied in detail have been selected for discussion. However, the role of support is also examined using examples of reactions involving unsupported metal nanoparticles (i.e., colloidal nanoparticles). It is clear that the support functionality can play a crucial role in tuning the catalytic activity that is observed and that advanced theory and characterization add greatly to our understanding of these fascinating catalysts.

Enhanced Charge Transport and Increased Active Sites on α-Fe2O3 (110) Nanorod Surface Containing Oxygen Vacancies for Improved Solar Water Oxidation Performance

The effect of oxygen vacancies (V_O) on α-Fe₂O₃ (110) facet on the performance of photoelectrochemical (PEC) water splitting is researched by both experiments and density functional theory (DFT) calculations. The experimental results manifest that the enhancement in photocurrent density by the presence of V_O is related with increased charge separation and charge-transfer efficiencies. The electrochemical analysis reveals that the sample with V_O demonstrates an enhanced carrier density and reduced charge-transfer resistance. The results of DFT calculation indicate that the better charge separation is also contributed by the decrease of potential on the V_O surface, which improves the hole transport from the bulk to the surface. The reduced charge-transfer resistance is owing to the greatly increased number of active sites. The current study provides important insight into the roles of V_O on α-Fe₂O₃ photoanode, especially on its surface catalysis. The generated lesson is also helpful for the improvement of other PEC photoanode materials.

Harvesting resonantly-trapped light for small molecule oxidation reactions at the Au/α-Fe2O3 interface

Plasmonic metal nanoparticles (NPs) extend the overall light absorption of semiconductor materials. However, it is not well understood how coupling metal NPs to semiconductors alters the photo-electrochemical activity of small molecule oxidation (SMO) reactions. Different photo-anode electrodes comprised of Au NPs and α-Fe2O3 are designed to elucidate how the coupling plays not only a role in the water oxidation reaction (WO) but also performs for different SMO reactions. In this regard, Au NPs are inserted at specific regions within and/or on α-Fe2O3 layers created with a sequential electron beam evaporation method and multiple annealing treatments. The SMO and WO reactions are probed with broad-spectrum irradiation experiments with an emphasis on light-driven enhancements above and below the α-Fe2O3 band gap. Thin films of α-Fe2O3 supported on a gold back reflective layer resonantly-traps incident light leading to enhanced SMO/WO conversion efficiencies at high overpotential (η) for above band-gap excitations with no SMO activity observed at low η. In contrast, a substantial increase in the light-driven SMO activity is observed at low η, as well as for below band-gap excitations when sufficiently thin α-Fe2O3 films are decorated with Au NPs at the solution-electrode interface. The enhanced photo-catalytic activity is correlated with increased surface oxygen content (hydroxyl groups) at the Au/α-Fe2O3 interface, as well as simulated volume-integrated near-field enhancements over select regions of the Au/α-Fe2O3 interface providing an important platform for future SMO/WO photo-electrocatalyst development.

Effect of surface oxygen vacancy sites on ethanol synthesis from acetic acid hydrogenation on a defective In2O3(110) surface

Developing a new type of low-cost and high-efficiency non-noble metal catalyst is beneficial for industrially massive synthesis of alcohols from carboxylic acids which can be obtained from renewable biomass. In this work, the effect of active oxygen vacancies on ethanol synthesis from acetic acid hydrogenation over defective In₂O₃(110) surfaces has been studied using periodic density functional theory (DFT) calculations. The relative stabilities of six surface oxygen vacancies from O_v1 to O_v6 on the In₂O₃(110) surface were compared. D1 and D4 surfaces with respective O_v1 and O_v4 oxygen vacancies were chosen to map out the reaction paths from acetic acid to ethanol. A reaction cycle mechanism between the perfect and defective states of the In₂O₃ surface was found to catalyze the formation of ethanol from acetic acid hydrogenation. By H₂ reduction the oxygen vacancies on the In₂O₃ surface play key roles in promoting CH₃COO* hydrogenation and C-O bond breaking in acetic acid hydrogenation. The acetic acid, in turn, benefits the creation of oxygen vacancies, while the C-O bond breaking of acetic acid refills the oxygen vacancy and, thereby, sustains the catalytic cycle. The In₂O₃ based catalysts were shown to be advantageous over traditional noble metal catalysts in this paper by theoretical analysis.