Development of magnetic dispersive microsolid-phase extraction using lanthanum phosphate nanoparticles doped on magnetic graphene oxide as a highly selective adsorbent for pesticide residues analysis in water and fruit samples

An efficient 3D adsorbent foam based on graphene oxide/AgO nanoparticles for rapid vortex-assisted floating solid phase extraction of bisphenol A in canned food products

In this study, a three-dimensional adsorbent was developed based on graphene oxide/AgO nanoparticles over interconnected nickel foam (GO/AgO@Ni foam) for rapid and efficient vortex assisted floating solid phase extraction of bisphenol A in canned food products prior to high performance liquid chromatography with a fluorescence detector. The analytical techniques scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared (FT-IR) were used for characterization of the synthetized GO/AgO@Ni foam. The effect of proficiency factors including pH, foam size, vortexing time, salt addition, sample volume, desorption type and volume, and desorption time on the extraction efficiency of bisphenol A were explored through the matrix match method. Under the above experimental conditions, the figures of merit of the method were acquired as LODs (S/N = 3) of 0.18-0.84 μg kg^-1, LOQs of 0.61-2.81 μg kg^-1 (S/N = 10), linear ranges of 0.5-500 μg kg^-1, and enrichment factors of 235.5-244.9. The inter-day precision values (RSD%, n = 7) of 2.5-3.6 and the intra-day precision (%) of (5 days and seven replicates for each day) 2.8-3.8 were achieved for bisphenol A at a concentration of 50 μg kg^-1. The relative recoveries of 94.0% to 99.6% were obtained for the canned food samples.

Development of a rapid efficient solid-phase microextraction: An overhead rotating flat surface sorbent based 3-D graphene oxide/ lanthanum nanoparticles @ Ni foam for separation and determination of sulfonamides in animal-based food products

In this study, an overhead rotating flat surface sorbent based solid-phase microextraction was developed as a rapid and efficient method for simultaneous separation and determination of sulfonamides in animal based-food products. 3D graphene oxide/ lanthanum nanoparticles @ Ni foam was introduced as a novel selective sorbent. SEM-EDX and FT-IR techniques were applied for characterization of the sorbent. At optimum conditions, the linear ranges of 0.4-700.0 (µg L^-1), 0.3-900.0 (µg L^-1), and 0.25-500 (µg L^-1) and the enrichment factors of 606.8, 604.3, 608.9 were obtained for SDZ, SMX, and SMZ, respectively. The LOD (S/N = 3) of 0.14, 0.11, 0.08 (µg L^-1) were achieved for SDZ, SMX, and SMZ, respectively. The intra-day and inter-day precision (%) (five days, n = 7) for the concentration of 100 µg L^-1 were less than 4.3 and 3.8, respectively. The recoveries over 90.0 % revealed high capability of the method for utilization in complex matrixes.

Development of a solventless method for the pesticides analysis

This paper represents the results of a case study investigating the development of a novel, simple, cost-effective, solventless and sensitive chromatographic method for the determination of volatile pesticides in aqueous samples by an electrothermally prepared pencil graphite (PG). In this study, PG were conditioned by passing a suitable direct current to activate PG by Joule effect. Conditioned PG was used for the extraction of Chlorpyrifos (CP), which is used as case study. The method was also found successful in the determination of CP in real water samples, providing acceptable recovery values (82-111%).

Magnetic nanoadsorbents for micropollutant removal in real water treatment: a review

Pure water will become a golden resource in the context of the rising pollution, climate change and the recycling economy, calling for advanced purification methods such as the use of nanostructured adsorbents. However, coming up with an ideal nanoadsorbent for micropollutant removal is a real challenge because nanoadsorbents, which demonstrate very good performances at laboratory scale, do not necessarily have suitable properties in in full-scale water purification and wastewater treatment systems. Here, magnetic nanoadsorbents appear promising because they can be easily separated from the slurry phase into a denser sludge phase by applying a magnetic field. Yet, there are only few examples of large-scale use of magnetic adsorbents for water purification and wastewater treatment. Here, we review magnetic nanoadsorbents for the removal of micropollutants, and we explain the integration of magnetic separation in the existing treatment plants. We found that the use of magnetic nanoadsorbents is an effective option in water treatment, but lacks maturity in full-scale water treatment facilities. The concentrations of magnetic nanoadsorbents in final effluents can be controlled by using magnetic separation, thus minimizing the ecotoxicicological impact. Academia and the water industry should better collaborate to integrate magnetic separation in full-scale water purification and wastewater treatment plants.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins, Pesticides, and Pharmaceuticals in Food Commodities

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.

Nanoparticles Based Extraction Strategies for Accurate and Sensitive Determination of Different Pesticides

Sample preparation methods have become indispensable steps in analytical measurements not only to lower the detection limit but also to eliminate the matrix effect although more sophisticated instruments are being commonly used in routine analyses. Solid phase extraction (SPE) is one of the main extraction/preconcentration methods used to extract and purify target analytes along with simple and rapid procedures but some limitations have led to seek for an easy, sensitive and fast extraction methods with analyte-selective sorbents. Nanoparticles with different modifications have been used as spotlight to enhance extraction efficiency of target pesticides from complicated matrices. Carbon-based, metal and metal oxides, silica and polymer-based nanoparticles have been explored as promising sorbents for pesticide extraction. In this review, different types of nanoparticles used in the preconcentration of pesticides in various samples are outlined and examined. Latest studies in the literature are discussed in terms of their instrumental detection, sample matrix and limit of detection values. Novel strategies and future directions of nanoparticles used in the extraction and preconcentration of pesticides are also discussed.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.