Complexation of guanidino containing l-arginine with nickel on silica-modified Hercynite MNPs: a novel catalyst for the Hantzsch synthesis of polyhydroquinolines and 2,3-Dihydroquinazolin-4(1H)-ones

Palladium doped PDA-coated hercynite as a highly efficient catalyst for mild hydrogenation of nitroareness

Hercynite magnetic nanoparticles were produced through the co-precipitation of ferrous and aluminum cations. The surface of hercynite was respectively coated with silica, 2,4,6-trichloro-1,3,5-triazine, and 1H-pyrazole-3,5-dicarboxylic acid to provide a suitable substrate for Pd(II) loading, furnishing Pd@Her-TCT-PDA. Subsequently, the introduced Pd(II) was reduced to Pd(0) using NaBH4. FT-IR, EDS, XRD, TGA, TEM and SEM images were the characteristic methods to prove the success of catalyst synthesis. The SEM image illustrated the particles with a nanosize of 25-50 nm and TEM image confirmed the presence of Pd nanoparticles with sizes lower than 2 nm. EDS elemental analysis of the catalyst proved the existence of Pd, Fe, and Al atoms along with the C, O, N, and Si atoms belong to the heterocyclic moieties. VSM analysis clarified a considerable drop in the magnetic properties of the hercynite core of the final catalyst due to its modified surface. TGA curve demonstrated that Pd@Her-TCT-PDA contains 20% organic content, attributed to the anchored heterocyclic ligands. Finally, Pd@Her-TCT-PDA was employed along with NaBH4 as a catalytic system to reduce completely the nitro group of aromatic compounds to their corresponding amines. The recyclability tests showed low drop in the catalytic activity of Pd@Her-TCT-PDA after third run with negligible leaching of Pd NPs.

Preparation of nanodiamond anchored on copper tannic acid as a heterogenous catalyst for synthesis of 1,4-benzodiazepines derivatives

In this research, a new and eco-friendly heterogeneous catalyst (ND@Tannicacid-Cu) was synthesized based on nanodiamond and copper tannic acid via esterification process. The as-prepared catalyst was characterized by Fourier transforms infrared spectroscopy (FT-IR), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), and X-ray diffraction (XRD) methods. The catalytic efficacy of the intended catalyst was examined by one-step three-component reaction of 1,4-benzodiazepine derivatives from a mixture of ortho-phenylenediamine, aromatic aldehydes, and dimedone under mild conditions. In all instances, corresponding 2,4-benzodiazepines derivatives were synthesized with high efficiency, short reaction time, straightforward work up procedure, no requirement for column-chromatography, and cost-effective catalyst. The heterogeneous catalyst was easily recycled using fillers, and it can be reused for eight cycles without significantly diminishing its performance.

Schiff Base Complex of Copper Immobilized on Core-Shell Magnetic Nanoparticles Catalyzed One-Pot Syntheses of Polyhydroquinoline Derivatives under Mild Conditions Supported by a DFT Study

We synthesized a stable and reusable Schiff base complex of copper immobilized on core-shell magnetic nanoparticles [Cu(II)-SB/GPTMS@SiO2@Fe3O4] with simple, efficient, and available materials. A variety of characterization analyses including Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating-sample magnetometry (VSM), energy-dispersive X-ray spectrometry (EDX), and inductively coupled plasma (ICP) confirm that our synthesized nanocatalyst was obtained. The particle size distribution from the TEM image was obtained in the range of 42-55 nm. The existence of cupric species (Cu2+) in the catalyst was determined with XPS analysis and clearly indicated two peaks at 933.7 and 953.7 eV for Cu 2p3/2 and Cu 2p1/2, respectively. BET results showed that our catalyst synthesized with a mesoporous structure and with a specific area of 48.82 m2 g-1. After detailed characterization, the resulting nanocatalyst exhibited excellent catalytic performance for the explored catalytic reactions in the one-pot synthesis of polyhydroquinoline derivatives by the Hantzsch reaction of dimedone, ethyl acetoacetate, ammonium acetate, and various aldehydes under sustainable and mild conditions. The corresponding products 5a-l are achieved in yields of 88-97%. Additionally, density functional theory (DFT) calculations were carried out to investigate the electrostatic potential root (ESP), natural bond orbital (NBO), and molecular orbitals (MOs), drawing the reaction mechanism using the total energy of the reactant and product and the study of structural parameters.

Urea-rich porous organic polymer as a hydrogen bond catalyst for Knoevenagel condensation reaction and synthesis of 2,3-dihydroquinazolin-4(1H)-ones

In this research, a new urea-rich porous organic polymer (urea-rich POP) as a hydrogen bond catalyst was synthesized via a solvothermal method. The physiochemical properties of the synthesized urea-rich POP were investigated by using different analyses like Fourier transform infrared (FT-IR) spectroscopy, field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), derivative thermogravimetry (DTG), energy-dispersive X-ray spectroscopy (EDS), elemental mapping analysis, X-ray diffraction analysis (XRD) and Brunauer-Emmett-Teller (BET) techniques. The preparation of urea-rich POP provides an efficacious platform for designing unique hydrogen bond catalytic systems. Accordingly, urea-rich POP, due to the existence of several urea moieties as hydrogen bond sites, has excellent performance as a catalyst for the Knoevenagel condensation reaction and multi-component synthesis of 2,3-dihydroquinazolin-4(1H)-ones.

Efficient synthesis of 3-alkyl-2-(-1H-1,2,3-triazolyl)methyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivative via multistep synthesis approach by novel Cu@Py-Oxa@SPION catalyst

In this pared, an efficient method is introduced for the synthesis of 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives. These novel products have both 1,2,3-triazole and quinazolinone in their structures. For the synthesis of these products, a novel catalyst is designed, synthesized, and characterized by the immobilization of copper onto modified magnetic iron oxide. The catalyst (denoted: Cu@Py-Oxa@SPION) was characterized by several characterization techniques. In this regard, 16 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives were synthesized in high isolated yields (77-86%). As an advantage, the catalyst is highly recoverable and its activity has not decreased after 7 sequential runs. The method is very efficient for the synthesis of the products in high isolated yields under mild reaction conditions in a green solvent. The scope of the method is broad and several examples were successfully synthesized using starting materials with different functional groups.

Zn Complex on Tryptophan-Functionalized MCM-41 as an Efficient and Promising Reusable Nanocatalyst in One-Pot Three-Component Synthesis of Amino Benzyl Quinolinols and Naphthols via a Betti Reaction

In this research, a Zn transition metallic complex on functionalized mesopore silica MCM-41 has been designed and utilized as an effective, recoverable, and thermally stable heterogeneous nanocatalyst in the formation of the C-C bond. Also, the synthesis of amino benzyl quinolinols and amino benzyl naphthol derivatives was performed by the three-component reaction of Betti from aromatic aldehydes, type II amines, and 8-hydroxyquinoline and 1-naphthol in the presence of the MCM-41-tryptophan-Zn nanocatalyst under reflux conditions. The short reaction times, high efficiency of the products, the easy separation of catalysts due to their heterogeneity, and their reusability are the advantages of this method. Finally, the nature of catalysts was studied by using some techniques such as the Fourier transform infrared spectrum, energy-dispersive spectroscopy, hot filtration test, transmission electron microscopy, scanning electron microscopy, X-ray diffraction, inductively coupled plasma optical emission spectrometry, and N₂ adsorption-desorption (BET). The synthesized heterogeneous catalysts showed perfect catalytic activity and also good recyclability in the Betti reaction. They could be reused at least for five consecutive cycles without significant loss of their catalytic activities.

SiO2-supported HClO4 catalyzed synthesis of (Z)-thiazolylhydrazonoindolin-2-ones and their electrochemical properties

In this paper, an environmentally benign silica-supported perchloric acid (HClO₄-SiO₂) catalyzed green FCDR strategy has been developed for the synthesis of (Z)-THIs (6) with high stereospecificity via an intramolecular hydrogen bond (IHB) directed approach, involving the reaction of methyl ketones (1), N-bromosuccinimide (NBS) (2), isatins (4) and thiosemicarbazide (5) in ethanol at reflux temperature for 45-60 min in one-pot. The reaction proceeds through the construction of C-Br (α-bromination), C-S & C-N (heterocyclization), and CN (condensation) bonds in one pot. The absolute structure of the compound (Z)-3-(2-(4-(4-bromophenyl)thiazol-2-yl)hydrazono)indolin-2-one (6e) has been confirmed by single-crystal XRD analysis. Further, the role of IHB on Z-configuration of the synthesized (Z)-THIs is proved by single-crystal XRD and ¹H NMR studies. Wide substrate scope, good functional group tolerance, scalability, improved safety since the method circumvents the use of highly lachrymatric α-bromoketones as starting materials, high product yields (up to 98%), short reaction times, reusable solid Brønsted acid catalyst (HClO₄-SiO₂), and products that do not require column chromatography purification are all attractive features of this FCDR strategy. Electrochemical properties of THIs (6) are examined by cyclic voltammetry. The HOMO and LUMO energy level of THIs, 6a, 6c, 6d, 6j, 6o-6v, 6y, and 6aa are comparable with the reported ambipolar materials, and the HOMO levels of other THIs, 6b, 6e-6i, 6n, 6w, 6x, 6z and 6 ab-6ae are similar with the most commonly used hole transporting materials (HTMs).

Design and characterization of an urea-bridged PMO supporting Cu(II) nanoparticles as highly efficient heterogeneous catalyst for synthesis of tetrazole derivatives

In this work, a new periodic mesoporous organosilica with urea-bridges produced by the reaction of (3-aminopropyl)triethoxysilane and toluene-2,4-diisocyanate (APS-TDU-PMO) is introduced. The obtained APS-TDU-PMO was found to be an appropriate support for loading of Cu(II) nanoparticles to afford supramolecular Cu@APS-TDU-PMO nanocomposite. Uniformity and mesoporosity of both synthesized nanomaterials including APS-TDU-PMO and Cu@APS-TDU-PMO were proved by different spectroscopic, microscopic or analytical techniques including FTIR, EDX, XRD, FESEM, TEM, BET, TGA and DTA. Furthermore, the prepared Cu@APS-TDU-PMO nanomaterial was also used, as a heterogeneous and recyclable catalyst, for the synthesis of tetrazole derivatives through cascade condensation, concerted cycloaddition and tautomerization reactions. Indeed, the main advantages of this Cu@APS-TDU-PMO is its simple preparation and high catalytic activity as well as proper surface area which enable it to work under solvent-free conditions. Also, the introduced Cu@APS-TDU-PMO heterogeneous catalyst showed good stability and reusability for six consecutive runs to address more green chemistry principles.

Silica sulfuric acid coated on SnFe2O4 MNPs: synthesis, characterization and catalytic applications in the synthesis of polyhydroquinolines

An efficient and heterogeneous novel magnetic solid sulfuric acid, immobilized on silica functionalized SnFe₂O₄, was successfully synthesized, characterized, and employed as a novel recoverable nanocatalyst for the synthesis of biologically active polyhydroquinoline derivatives. The SnFe₂O₄@SiO₂-SO₃H was easily synthesized and confirmed using various spectroscopic techniques, including FT-IR, XRD, EDX, Map, TGA, SEM and TEM analyses. The catalytic behavior of the resulting catalyst system was investigated in the Hantzsch synthesis of polyhydroquinoline derivatives. The desired products were obtained with high conversions and excellent reusability.

Insights into the catalytic potential of a rationally designed magnetic boron nitride nanosheet supported nickel catalyst for the efficient synthesis of 1,4-dihydropyridines

Magnetically integrated ultrathin h-BN nanosheets based nickel catalyst for the one-pot multicomponent reaction to access 1,4-dihydropyridines.

Hercynite silica sulfuric acid: a novel inorganic sulfurous solid acid catalyst for one-pot cascade organic transformations

Herein, we delignated the synthesis of a novel inorganic sulfurous magnetic solid acid catalyst by the immobilization of an extremely high content of sulfuric acid functionalities on the amorphous silica-modified hercynite nanomagnetic core–shell via a simple method. Silica sulfuric acid (SSA) modified hercynite nanocomposite (hercynite@SSA) combines excellent recoverability and stability characteristics of hercynite (which can be regarded as a ferro spinel with Fd3m space group and cubic crystal structure) with the strong Brønsted acid properties of –SO₃H groups. This nanomagnetic solid acid was found to be an efficient and facile strong solid acid catalyst for the synthesis of bis(pyrazolyl)methanes via two different one-pot multicomponent methodologies under green conditions. The hercynite@SSA catalyst shows excellent catalytic activity and reusability in the ethanolic medium among different solid acid materials. A plausible reaction mechanism is proposed for this synthesis.

A novel inorganic sulfurous nanomagnetic solid acid composite was synthesized and its catalytic activity was evaluated in the synthesis of bis(pyrazolyl)methane derivatives. The catalyst displayed excellent activity and recoverability under green conditions.