Carbon Dioxide Adsorption on V2O3(0001)

The role of surface chemistry on CO2 adsorption in biomass-derived porous carbons by experimental results and molecular dynamics simulations

Biomass-derived porous carbons have been considered one of the most effective adsorbents for CO2 capture, due to their porous structure and high specific surface area. In this study, we successfully synthesized porous carbon from celery biomass and examined the effect of external adsorption parameters including time, temperature, and pressure on CO2 uptake in experimental and molecular dynamics (MD) simulations. Furthermore, the influence of carbon's surface chemistry (carboxyl and hydroxyl functionalities) and nitrogen type on CO2 capture were investigated utilizing MD simulations. The results showed that pyridinic nitrogen has a greater tendency to adsorb CO2 than graphitic. It was found that the simultaneous presence of these two types of nitrogen has a greater effect on the CO2 sorption than the individual presence of each in the structure. It was also revealed that the addition of carboxyl groups (O=C-OH) to the carbon matrix enhances CO2 capture by about 10%. Additionally, by increasing the simulation time and the size of the simulation box, the average absolute relative error for simulation results of optimal structure declined to 16%, which is an acceptable value and makes the simulation process reliable to predict adsorption capacity under various conditions.

Electron stimulated desorption of vanadyl-groups from vanadium oxide thin films on Ru(0001) probed with STM

Low-temperature scanning tunnelling microscopy (STM) is employed to study electron-stimulated desorption of vanadyl groups from an ultrathin vanadium oxide film. The vanadia patches are prepared by reactive vapour deposition of V onto a Ru(0001) surface and comprise a highly ordered network of six and twelve membered V-O rings, some of them terminated by upright V[double bond, length as m-dash]O groups. The vanadyl units can be desorbed via electron injection from the STM tip in a reliable fashion. From hundreds of individual experiments, desorption rates are determined as a function of bias voltage and tunnelling current. Data analysis reveals a distinct threshold behaviour with bias onsets at +3.3 V and -2.6 V for positive and negative polarity, respectively. The desorption rate varies quadratically (cubically) with the tunnelling current at positive (negative) sample bias, indicating that V[double bond, length as m-dash]O desorption is a many-electron process. Based on our findings, a mechanism for desorption is proposed that includes resonant tunnelling into anti-bonding or out of bonding orbitals, followed by vibrational ladder climbing in the binding potential of the V[double bond, length as m-dash]O ad-system. The underlying electronic states can be identified directly in the STM conductance spectra taken on the oxide surface.

Micro-Plasma Assisted Synthesis of ZnO Nanosheets for the Efficient Removal of Cr6+ from the Aqueous Solution

Herein, we report a micro-plasma assisted solvothermal synthesis and characterization of zinc oxide nanosheets (ZnO-NSs) and their application for the removal of Cr6+ ion from aqueous solution. The morphological investigations by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the high-density growth of nanosheets with the typical sizes in the range of 145.8–320.25 nm. The typical surface area of the synthesized ZnO-NSs, observed by Brunauer-Emmett-Teller (BET), was found to be 948 m2/g. The synthesized ZnO-NSs were used as efficient absorbent for the removal of Cr6+ ion from aqueous solution. Various parameters such as pH, contact time, amount of adsorbate and adsorbent on the removal efficiency of Cr6+ ion was optimized and presented in this paper. At optimized conditions, the highest value for removal was 87.1% at pH = 2 while the calculated maximum adsorption capacity was ~87.37 mg/g. The adsorption isotherm data were found to be best fitted to Temkin adsorption isotherm and the adsorption process followed the pseudo-first-order kinetics. Furthermore, the toxicity of ZnO-NSs were also examined against fibroblast cells, which show favorable results and proved that it can be used for wastewater treatment.

Surface Action Spectroscopy: A Review and a Perspective on a New Technique to Study Vibrations at Surfaces

A new vibrational spectroscopy method aimed at the investigation of solid surfaces in ultrahigh vacuum, called "Surface Action Spectroscopy (SAS)", is described and the first results are reviewed. This technique is based on ideas and experiments performed in the gas phase. A surface is exposed to a messenger species at low temperature. This messenger species is desorbed via absorption of tunable infrared light from a free-electron laser and the desorption rate of the messenger species is recorded via mass spectrometry. It is shown that the technique is extremely surface sensitive and we discuss the basic mechanisms of the technique. We show a feasibility study on a V₂ O₃ (0001) surface, where we know the surface structure. We then proceed to the example of iron oxide films to study the surface structure in parallel with calculations of the surface phonons, which allow us to confirm the surface structure of Fe₃ O₄ (111) to be Fe_tet terminated. It also provides evidence for the so-called biphase structure. To conclude, we discuss possibilities to apply the technique to interesting questions in model and real catalysis, since the technique may provide interesting information independent of long-range order of the sample.

Surface action spectroscopy with rare gas messenger atoms

Action spectroscopy with inert gas messengers is commonly used for the characterization of aggregates in the gas phase. The messengers, often rare gas atoms or D₂ molecules, are attached to the gas phase aggregates at low temperature. Vibrational spectra of the aggregates are measured via detection of inert gas desorption following a vibrational excitation by variable-energy infrared light. We have constructed an apparatus for the application of action spectroscopy to surfaces of solids with the aim of establishing a new method for the vibrational spectroscopy of surfaces and deposited clusters. Experiments performed for neon covered V₂O₃(0001) show that this method can provide information about surface vibrations. Besides the surface sensitive channel, there is also a bulk sensitive one as demonstrated with the example of CeO₂(111) thin film data. Unlike infrared reflection absorption spectroscopy, normalization to a reference spectrum is not required for action spectroscopy data, and unlike high resolution electron energy loss spectroscopy, the action spectroscopy method does not suffer from moderate resolution nor from multiple excitations. Selective decoration of specific surface features with messenger atoms may be utilized to focus the spectroscopic information onto these features.

Vibrational Action Spectroscopy of Solids: New Surface-Sensitive Technique

Vibrational action spectroscopy employing infrared radiation from a free-electron laser has been successfully used for many years to study the vibrational and structural properties of gas phase aggregates. Despite the high sensitivity of this method no relevant studies have yet been conducted for solid sample surfaces. We have set up an experiment for the application of this method to such targets, using infrared light from the free-electron laser of the Fritz Haber Institute. In this Letter, we present first results of this technique with adsorbed argon and neon atoms as messengers. We were able to detect surface-located vibrations of a thin V_{2}O_{3}(0001) film on Au(111) as well as adsorbate vibrations, demonstrating that this method is highly surface sensitive. We consider that the dominant channel for desorption of the messenger atoms is direct inharmonic vibrational coupling, which is essentially insensitive to subsurface or bulk vibrations. Another channel is thermal desorption due to sample heating by absorption of infrared light. The high surface sensitivity of the nonthermal channel and its insensitivity to subsurface modes makes this technique an ideal tool for the study of surface-located vibrations.