Solvothermal Synthesis of Mesoporous TiO2 Using Sodium Dodecyl Sulfate for Photocatalytic Degradation of Methylene Blue

Tailoring visible-light active TiO2/cellulose nanocomposites with controlled crystalline structure for enhanced photocatalytic performance

This work involves a green and simple synthesis of TiO2 nanoparticles on cellulose under mild conditions without the need for calcination via hydrolysis of titanium oxysulfate (TiOSO4). The synthesis conditions, such as sulfuric acid concentration (0-10% wt), temperature (70-90 ℃), and time (4-8 h), focused on precisely controlling the structure of TiO2 to enhance its photocatalytic effectiveness under visible light. At a lower 2.5 wt% sulfuric acid concentration, pure anatase was formed on the cellulose, while an increase in the range of 5.0-7.5 wt% sulfuric acid concentration yielded a rutile phase, resulting in a mixed phase of anatase and rutile on the cellulose. The pure rutile phase was found at a low temperature (70 ℃), while increased temperature led to the formation of the anatase phase. These results confirmed that the formation of crystalline TiO2 phase on the cellulose depended on sulfuric acid concentration and temperature for hydrolysis. Additionally, the photocatalytic properties of the obtained materials were evaluated by degradationvisible of Rhodamine B (RhB) under UV and visible light. The findings revealed that the mixed phase (anatase/rutile) of TiO2 on the cellulose demonstrated a superior photocatalytic efficiency (99.2%) compared to pure anatase (85.75%) and rutile (75.08%) when exposed to visible light.

Sol-gel synthesis of TiO2 on Co3O4-coated sporopollenin exine microcapsules (SECs) and photocatalytic performance of new semiconductor heterojunction material

In this study, a new approach was developed to prepare mesoporous hybrid TiO₂/Co₃O₄ coated on Juglans sporopollenin exine microcapsules (SECs). TiO₂ was synthesized on Co₃O₄-coated SECs used as substrate, by sol-gel method. The obtained semiconductor/semiconductor hetero-junction hybrid materials were characterized with X-ray diffractometry (XRD), UV-Vis absorption spectroscopy, Raman spectroscopy, scanning electron microscopy (SEM), particle size distribution, specific surface area, and zeta potential measurements. Photocatalytic performances of hybrid materials were tested for Reactive Black 5 dye under both UV and visible light. Equilibrium pH of the solution containing 10 mg/L Reactive Black 5 dye and 0.1% wt/v TiO₂/Co₃O₄ was around 4.7. After irradiation in the solar box, more than 98% of the Reactive Black 5 was photocatalytically degraded within 60 min.

Solar-light-driven LaFe x Ni1- x O3 perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants

LaFe _x Ni_{1- x} O₃ perovskite oxides were prepared by the sol-gel method under various conditions, including different pH values (pH 0 and pH 7) and different calcination temperatures (500-800 °C) as well as different Fe/Ni ratios (1/9, 3/7, 5/5, 7/3, 9/1). The samples were examined by XRD, DRS, BET, and SEM to reveal their crystallinity, light-absorption ability, specific surface area, and surface features, respectively. The photocatalytic Fenton reaction was conducted using various LaFe _x Ni_{1- x} O₃ perovskite oxides to decompose the methylene blue molecules. Accordingly, the synthesis condition of pH 0, calcination temperature at 700 °C, and Fe/Ni ratio = 7/3 could form LaFe_0.7Ni_0.3O₃ perovskite oxides as highly efficient photocatalysts. Moreover, various conditions during the photocatalytic degradation were verified, such as pH value, catalyst dosage, and the additional amount of H₂O₂. LaFe_0.7Ni_0.3O₃ perovskite oxides could operate efficiently under pH 3.5, catalyst dosage of 50 mg/150 mL, and H₂O₂ concentration of 133 ppm to decompose the MB dye in the 1st order kinetic rate constant of 0.0506 s^-1.

The degradation of paraben preservatives: Recent progress and sustainable approaches toward photocatalysis

Parabens are a class of compounds primarily used as antimicrobial preservatives in pharmaceutical products, cosmetics, and foodstuff. Their widely used field leads to increasing concentrations detected in various environmental matrices like water, soil, and sludges, even detected in human tissue, blood, and milk. Treatment techniques, including chemical advanced oxidation, biological degradation, and physical adsorption processes, have been widely used to complete mineralization or to degrade parabens into less complicated byproducts. All kinds of processes were reviewed to give a completed picture of parabens removal. In light of these treatment techniques, advanced photocatalysis, which is emerging rapidly and widely as an economical, efficient, and environmentally-friendly technique, has received considerable attention. TiO₂-based and non-TiO₂-based photocatalysts play an essential role in parabens degradation. The effect of experimental parameters, such as the concentration of targeted parabens, concentration of photocatalyst, reaction time, and initial solution pH, even the presence of radical scavengers, are surveyed and compared from the literature. Some representative parabens such as methylparaben, propylparaben, and benzylparaben have been successfully studied the reaction pathways and their intermediates in their degradation process. As reported in the literature, the degradation of parabens involves the production of highly reactive species, mainly hydroxyl radicals. These reactive radicals would attack the paraben preservatives, break, and finally mineralize them into simpler inorganic and nontoxic molecules. Concluding perspectives on the challenges and opportunities for photocatalysis toward parabens remediation are also intensively highlighted.

Perovskite Zinc Titanate Photocatalysts Synthesized by the Sol–Gel Method and Their Application in the Photocatalytic Degradation of Emerging Contaminants

In this study, perovskite ZnTiO3 photocatalysts were fabricated by the sol–gel method. The photocatalytic capability was verified by the degradation of the emerging contaminant, the antibiotic amoxicillin (AMX). For the preparation, the parameters of the calcination temperature and the additional amount of polyvinylpyrrolidone (PVP) and ammonia are discussed, including the calcining temperature (500, 600, 700, 800 °C), the volume of ammonia (750, 1500, 3000 μL), and the weight of PVP (3 g and 5 g). The prepared perovskite ZnTiO3 was characterized by XRD, FESEM, BET, and UV-Vis. It is shown that the perovskite ZnTiO3 photocatalysts are structurally rod-like and ultraviolet light-responsive. Consequently, the synthesis conditions for fabricating the perovskite ZnTiO3 photocatalysts with the highest photocatalytic performance were a calcining temperature of 700 °C, an additional ammonia amount of 1500 μL, and added PVP of 5 g. Moreover, the photocatalytic degradation of perovskite ZnTiO3 photocatalysts on other pollutants, including the antibiotic tetracycline (TC), methyl orange (MO), and methylene blue (MB) dyes, was also examined. This provides the basis for the application of perovskite ZnTiO3 as a photocatalyst to decompose emerging contaminants and organic pollutants in wastewater treatment.