Mosaicism diminishes the value of pre-implantation embryo biopsies for detecting CRISPR/Cas9 induced mutations in sheep

Transverse and vertical incisions affect the viability of in vitro-produced embryos submitted to a simplified microsurgery approach

Integrating in vitro embryo production with embryonic microsurgery facilitates the generation of monozygotic twins. However, despite their potential benefits, these methods have not been widely adopted in commercial settings because of their substantial costs. Hence, there is a need to streamline the bisection procedure while ensuring efficient production of viable demi-embryos. In this study, we investigated the impact of different orientations of microsurgical incisions in relation to inner cell mass on embryonic development, morphology, viability, and expression of cell fate protein markers using a simplified microsurgery approach. Ovaries were transported from the slaughterhouse to the laboratory and aspirated to obtain oocytes that were selected and subjected to in vitro embryo production. The selected expanded blastocysts (n = 204) underwent microsurgery. The blastocysts were immobilized to facilitate incision using an adapted microblade, yielding demi-embryos (vertical incision) and viable embryonic fragments (transverse incision). The structures were then re-cultured for 12 h. Viability was assessed by measuring the re-expansion rate after re-culture, followed by immunofluorescence analysis of proteins (CDX2 and NANOG) and apoptosis analysis using terminal deoxynucleotyl transferase dUTP nick end-labeling (TUNEL). Microsurgically derived embryos exhibited remarkable plasticity, as evidenced by a slight reduction (P < 0.05) in the re-expansion rate (transverse 64.2 % and vertical 57.2 %) compared to that of the control group (blastocysts without microsurgery) (86.7 %). They also demonstrated the ability of morphological reconstitution after culturing. Despite the anticipated decrease (P < 0.05) in the total number of cells and embryo volume, microsurgery did not result in a significant increase (P > 0.05) in the number of apoptotic cells. Furthermore, microsurgery led to higher (P < 0.05) expression of markers associated with pluripotency, indicating its efficiency in preserving regenerative capacity. Moreover, microsurgery, whether followed by immunosurgery or not, made the isolation of embryonic cells easier. In conclusion, both transverse and vertical microsurgery incisions enabled the production of identical demi-embryos and served as tools for isolating embryonic cells without compromising the resumption of development and the apoptotic index.

Novel off-Targeting Events Identified after Genome Wide Analysis of CRISPR-Cas Edited Pigs

CRISPR-Cas technology has transformed our ability to introduce targeted modifications, allowing unconventional animal models such as pigs to model human diseases and improve its value for food production. The main concern with using the technology is the possibility of introducing unwanted modifications in the genome. In this study, we illustrate a pipeline to comprehensively identify off-targeting events on a global scale in the genome of three different gene-edited pig models. Whole genome sequencing paired with an off-targeting prediction software tool filtered off-targeting events amongst natural variations present in gene-edited pigs. This pipeline confirmed two known off-targeting events in IGH knockout pigs, AR and RBFOX1, and identified other presumably off-targeted loci. Independent validation of the off-targeting events using other gene-edited DNA confirmed two novel off-targeting events in RAG2/IL2RG knockout pig models. This unique strategy offers a novel tool to detect off-targeting events in genetically heterogeneous species after genome editing.

Production of light-coloured, low heat-absorbing Holstein Friesian cattle by precise embryo-mediated genome editing

CONTEXT

Genome editing enables the introduction of beneficial sequence variants into the genomes of animals with high genetic merit in a single generation. This can be achieved by introducing variants into primary cells followed by producing a live animal from these cells by somatic cell nuclear transfer cloning. The latter step is associated with low efficiencies and developmental problems due to incorrect reprogramming of the donor cells, causing animal welfare concerns. Direct editing of fertilised one-cell embryos could circumvent this issue and might better integrate with genetic improvement strategies implemented by the industry.

METHODS

In vitro fertilised zygotes were injected with TALEN editors and repair template to introduce a known coat colour dilution mutation in the PMEL gene. Embryo biopsies of injected embryos were screened by polymerase chain reaction and sequencing for intended biallelic edits before transferring verified embryos into recipients for development to term. Calves were genotyped and their coats scanned with visible and hyperspectral cameras to assess thermal energy absorption.

KEY RESULTS

Multiple non-mosaic calves with precision edited genotypes were produced, including calves from high genetic merit parents. Compared to controls, the edited calves showed a strong coat colour dilution which was associated with lower thermal energy absorbance.

CONCLUSIONS

Although biopsy screening was not absolutely accurate, non-mosaic, precisely edited calves can be readily produced by embryo-mediated editing. The lighter coat colouring caused by the PMEL mutation can lower radiative heat gain which might help to reduce heat stress.

IMPLICATIONS

The study validates putative causative sequence variants to rapidly adapt grazing cattle to changing environmental conditions.

Perspectives in Genome-Editing Techniques for Livestock

Genome editing of farm animals has undeniable practical applications. It helps to improve production traits, enhances the economic value of livestock, and increases disease resistance. Gene-modified animals are also used for biomedical research and drug production and demonstrate the potential to be used as xenograft donors for humans. The recent discovery of site-specific nucleases that allow precision genome editing of a single-cell embryo (or embryonic stem cells) and the development of new embryological delivery manipulations have revolutionized the transgenesis field. These relatively new approaches have already proven to be efficient and reliable for genome engineering and have wide potential for use in agriculture. A number of advanced methodologies have been tested in laboratory models and might be considered for application in livestock animals. At the same time, these methods must meet the requirements of safety, efficiency and availability of their application for a wide range of farm animals. This review aims at covering a brief history of livestock animal genome engineering and outlines possible future directions to design optimal and cost-effective tools for transgenesis in farm species.

Embryo biotechnologies in sheep: Achievements and new improvements

To date, large-scale use of multiple ovulation and embryo transfer (MOET) programmes in ovine species is limited due to unpredictable results and high costs of hormonal stimulation and treatment. Therefore, even if considered reliable, they are not fully applicable in large-scale systems. More recently, the new prospects offered by in vitro embryo production (IVEP) through collection of oocytes post-mortem or by repeated ovum pick-up from live females suggested an alternative to MOET programmes and may be more extensively used, moving from the exclusive research in the laboratory to field application. The possibility to perform oocytes recovery from juvenile lambs to obtain embryos (JIVET) offers the great advantage to significantly reduce the generation interval, speeding the rate of genetic improvement. Although in the past decades several studies implemented novel protocols to enhance embryo production in sheep, the conditions of every single stage of IVEP can significantly affect embryo yield and successful transfer into the recipients. Moreover, the recent progresses on embryo production and freezing technologies might allow wider propagation of valuable genes in small ruminants populations and may be used for constitution of flocks without risks of disease. In addition, they can give a substantial contribution in preserving endangered breeds. The new era of gene editing might offer innovative perspectives in sheep breeding, but the application of such novel techniques implies involvement of specialized operators and is limited by relatively high costs for embryo manipulation and molecular biology analysis.

CRISPR/Cas: History and Perspectives

Abstract

Discovery of the CRISPR/Cas system revolutionized biology and biomedicine in the 21st century. Here we discuss the milestones in the development of CRISPR/Cas genome editing technology, from the history of discovery to current developments, including medical applications. Technical and ethical problems associated with the use of CRISPR/Cas for editing human embryonic genomes are also discussed.

Cytoplasmic Injection of Zygotes to Genome Edit Naturally Occurring Sequence Variants Into Bovine Embryos

Genome editing provides opportunities to improve current cattle breeding strategies through targeted introduction of natural sequence variants, accelerating genetic gain. This can be achieved by harnessing homology-directed repair mechanisms following editor-induced cleavage of the genome in the presence of a repair template. Introducing the genome editors into zygotes and editing in embryos has the advantage of uncompromised development into live animals and alignment with contemporary embryo-based improvement practices. In our study, we investigated the potential to introduce sequence variants, known from the pre-melanosomal protein 17 (PMEL) and prolactin receptor (PRLR) genes, and produce non-mosaic, edited embryos, completely converted into the precision genotype. Injection of gRNA/Cas9 editors into bovine zygotes to introduce a 3 bp deletion variant into the PMEL gene produced up to 11% fully converted embryos. The conversion rate was increased to up to 48% with the use of TALEN but only when delivered by plasmid. Testing three gRNA/Cas9 editors in the context of several known PRLR sequence variants, different repair template designs and delivery as DNA, RNA or ribonucleoprotein achieved full conversion rates up to 8%. Furthermore, we developed a biopsy-based screening strategy for non-mosaic embryos which has the potential for exclusively producing non-mosaic animals with intended precision edits.

CRISPR/Cas9 editing of the MYO7A gene in rhesus macaque embryos to generate a primate model of Usher syndrome type 1B

Mutations in the MYO7A gene lead to Usher syndrome type 1B (USH1B), a disease characterized by congenital deafness, vision loss, and balance impairment. To create a nonhuman primate (NHP) USH1B model, CRISPR/Cas9 was used to disrupt MYO7A in rhesus macaque zygotes. The targeting efficiency of Cas9 mRNA and hybridized crRNA-tracrRNA (hyb-gRNA) was compared to Cas9 nuclease (Nuc) protein and synthetic single guide (sg)RNAs. Nuc/sgRNA injection led to higher editing efficiencies relative to mRNA/hyb-gRNAs. Mutations were assessed by preimplantation genetic testing (PGT) and those with the desired mutations were transferred into surrogates. A pregnancy was established from an embryo where 92.1% of the PGT sequencing reads possessed a single G insertion that leads to a premature stop codon. Analysis of single peripheral blood leukocytes from the infant revealed that half the cells possessed the homozygous single base insertion and the remaining cells had the wild-type MYO7A sequence. The infant showed sensitive auditory thresholds beginning at 3 months. Although further optimization is needed, our studies demonstrate that it is feasible to use CRISPR technologies for creating NHP models of human diseases.

Effect of ARTEMIS (DCLRE1C) deficiency and microinjection timing on editing efficiency during somatic cell nuclear transfer and in vitro fertilization using the CRISPR/Cas9 system

The ability to efficiently introduce site-specific genetic modifications to the mammalian genome has been dramatically improved with the use of the CRISPR/Cas9 system. CRISPR/Cas9 is a powerful tool used to generate genetic modifications by causing double-strand breaks (DSBs) in DNA. Artemis (ART; also known as DCLRE1C), is a nuclear protein and is essential for DSB end joining in DNA repair via the canonical non-homologous end joining (c-NHEJ) pathway. In this work, we tested whether ART deficiency affects DNA repair following CRISPR/Cas9 induced DSBs in somatic cells. We also demonstrated the effect of microinjection timing on embryo developmental ability and gene targeting efficiency of CRISPR/Cas9 system to disrupt the interleukin 2 receptor subunit gamma (IL2RG) locus using porcine in vitro fertilization (IVF) and somatic cell nuclear transfer (SCNT) derived embryos. In comparison to non-injected controls, CRISPR/Cas9 injection of IVF derived zygotes at 4 h and 8 h after fertilization did not impact cleavage and blastocyst rate. Gene modification rate was observed to be higher, 53.3% (9/16) in blastocysts injected 4 h post-fertilization as compared to 11.1% (1/9) in blastocysts injected 8 h post-fertilization. Microinjection 8 h after chemical activation of SCNT derived embryos decreased blastocyst development rate compared to non-injected controls but showed a higher gene modification efficiency of 66.7% as compared to 25% in the 4 h post-activation injection group. Furthermore, we observed that male ART^-/- and ART^+/- porcine fetal fibroblast (pFF) cells showed lower modification rates (2.5% and 1.9%, respectively) as compared to the ART intact cell line (8.3%). Interestingly, the female ART^-/- and ART^+/- pFF cells had modification rates (4.2% and 10.1%, respectively) similar to those seen in the ART intact cells. This study demonstrates the complex effect of various parameters such as microinjection timing and ART deficiency on gene editing efficiency in in vitro derived porcine embryos.

Electroporation-Mediated Genome Editing of Livestock Zygotes

The introduction of genome editing reagents into mammalian zygotes has traditionally been accomplished by cytoplasmic or pronuclear microinjection. This time-consuming procedure requires expensive equipment and a high level of skill. Electroporation of zygotes offers a simplified and more streamlined approach to transfect mammalian zygotes. There are a number of studies examining the parameters used in electroporation of mouse and rat zygotes. Here, we review the electroporation conditions, timing, and success rates that have been reported for mice and rats, in addition to the few reports about livestock zygotes, specifically pigs and cattle. The introduction of editing reagents at, or soon after, fertilization can help reduce the rate of mosaicism, the presence of two of more genotypes in the cells of an individual; as can the introduction of nuclease proteins rather than mRNA encoding nucleases. Mosaicism is particularly problematic in large livestock species with long generation intervals as it can take years to obtain non-mosaic, homozygous offspring through breeding. Gene knockouts accomplished via the non-homologous end joining pathway have been more widely reported and successfully accomplished using electroporation than have gene knock-ins. Delivering large DNA plasmids into the zygote is hindered by the zona pellucida (ZP), and the majority of gene knock-ins accomplished by electroporation have been using short single stranded DNA (ssDNA) repair templates, typically less than 1 kb. The most promising approach to deliver larger donor repair templates of up to 4.9 kb along with genome editing reagents into zygotes, without using cytoplasmic injection, is to use recombinant adeno-associated viruses (rAAVs) in combination with electroporation. However, similar to other methods used to deliver clustered regularly interspaced palindromic repeat (CRISPR) genome-editing reagents, this approach is also associated with high levels of mosaicism. Recent developments complementing germline ablated individuals with edited germline-competent cells offer an approach to avoid mosaicism in the germline of genome edited founder lines. Even with electroporation-mediated delivery of genome editing reagents to mammalian zygotes, there remain additional chokepoints in the genome editing pipeline that currently hinder the scalable production of non-mosaic genome edited livestock.

Current status of the application of gene editing in pigs

Genetically modified animals, especially rodents, are widely used in biomedical research. However, non-rodent models are required for efficient translational medicine and preclinical studies. Owing to the similarity in the physiological traits of pigs and humans, genetically modified pigs may be a valuable resource for biomedical research. Somatic cell nuclear transfer (SCNT) using genetically modified somatic cells has been the primary method for the generation of genetically modified pigs. However, site-specific gene modification in porcine cells is inefficient and requires laborious and time-consuming processes. Recent improvements in gene-editing systems, such as zinc finger nucleases, transcription activator-like effector nucleases, and the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein (CRISPR/Cas) system, represent major advances. The efficient introduction of site-specific modifications into cells via gene editors dramatically reduces the effort and time required to generate genetically modified pigs. Furthermore, gene editors enable direct gene modification during embryogenesis, bypassing the SCNT procedure. The application of gene editors has progressively expanded, and a range of strategies is now available for porcine gene engineering. This review provides an overview of approaches for the generation of genetically modified pigs using gene editors, and highlights the current trends, as well as the limitations, of gene editing in pigs.

Novel CRISPR-Cas Systems: An Updated Review of the Current Achievements, Applications, and Future Research Perspectives

According to Darwin's theory, endless evolution leads to a revolution. One such example is the Clustered Regularly Interspaced Palindromic Repeats (CRISPR)-Cas system, an adaptive immunity system in most archaea and many bacteria. Gene editing technology possesses a crucial potential to dramatically impact miscellaneous areas of life, and CRISPR-Cas represents the most suitable strategy. The system has ignited a revolution in the field of genetic engineering. The ease, precision, affordability of this system is akin to a Midas touch for researchers editing genomes. Undoubtedly, the applications of this system are endless. The CRISPR-Cas system is extensively employed in the treatment of infectious and genetic diseases, in metabolic disorders, in curing cancer, in developing sustainable methods for fuel production and chemicals, in improving the quality and quantity of food crops, and thus in catering to global food demands. Future applications of CRISPR-Cas will provide benefits for everyone and will save countless lives. The technology is evolving rapidly; therefore, an overview of continuous improvement is important. In this review, we aim to elucidate the current state of the CRISPR-Cas revolution in a tailor-made format from its discovery to exciting breakthroughs at the application level and further upcoming trends related to opportunities and challenges including ethical concerns.

Lipofection-Mediated Introduction of CRISPR/Cas9 System into Porcine Oocytes and Embryos

Simple Summary

Liposome-mediated gene transfer has become an alternative method for establishing a gene targeting framework, and the production of mutant animals may be feasible even in laboratories without specialized equipment. However, whether blastocyst genome editing can be performed by treatment with lipofection reagent, guide RNA, and Cas9, without performing electroporation or microinjection, remains unclear. In this study, we demonstrated that lipofection treatment successfully induced mutation into zygotes during in vitro fertilization and in embryos at the 2- and 4-cell stages. Although liposome-mediated gene editing is a feasible system for use with zona-pellucida-free oocytes/embryos, several challenges must be overcome.

Abstract

Liposome-mediated gene transfer has become an alternative method for establishing a gene targeting framework, and the production of mutant animals may be feasible even in laboratories without specialized equipment. However, how this system functions in mammalian oocytes and embryos remains unclear. The present study was conducted to clarify whether blastocyst genome editing can be performed by treatment with lipofection reagent, guide RNA, and Cas9 for 5 h without using electroporation or microinjection. A mosaic mutation was observed in blastocysts derived from zona pellucida (ZP)-free oocytes following lipofection treatment, regardless of the target genes. When lipofection treatment was performed after in vitro fertilization (IVF), no significant differences in the mutation rates or mutation efficiency were found between blastocysts derived from embryos treated at 24 and 29 h from the start of IVF. Only blastocysts from embryos exposed to lipofection treatment at 29 h after IVF contained biallelic mutant. Furthermore, there were no significant differences in the mutation rates or mutation efficiency between blastocysts derived from embryos at the 2- and 4-cell stages. This suggests that lipofection-mediated gene editing can be performed in ZP-free oocytes and ZP-free embryos; however, other factors affecting the system efficiency should be further investigated.

One-step generation of a targeted knock-in calf using the CRISPR-Cas9 system in bovine zygotes

Background

The homologous recombination (HR) pathway is largely inactive in early embryos prior to the first cell division, making it difficult to achieve targeted gene knock-ins. The homology-mediated end joining (HMEJ)-based strategy has been shown to increase knock-in efficiency relative to HR, non-homologous end joining (NHEJ), and microhomology-mediated end joining (MMEJ) strategies in non-dividing cells.

Results

By introducing gRNA/Cas9 ribonucleoprotein complex and a HMEJ-based donor template with 1 kb homology arms flanked by the H11 safe harbor locus gRNA target site, knock-in rates of 40% of a 5.1 kb bovine sex-determining region Y (SRY)-green fluorescent protein (GFP) template were achieved in Bos taurus zygotes. Embryos that developed to the blastocyst stage were screened for GFP, and nine were transferred to recipient cows resulting in a live phenotypically normal bull calf. Genomic analyses revealed no wildtype sequence at the H11 target site, but rather a 26 bp insertion allele, and a complex 38 kb knock-in allele with seven copies of the SRY-GFP template and a single copy of the donor plasmid backbone. An additional minor 18 kb allele was detected that looks to be a derivative of the 38 kb allele resulting from the deletion of an inverted repeat of four copies of the SRY-GFP template.

Conclusion

The allelic heterogeneity in this biallelic knock-in calf appears to have resulted from a combination of homology directed repair, homology independent targeted insertion by blunt-end ligation, NHEJ, and rearrangement following editing of the gRNA target site in the donor template.

This study illustrates the potential to produce targeted gene knock-in animals by direct cytoplasmic injection of bovine embryos with gRNA/Cas9, although further optimization is required to ensure a precise single-copy gene integration event.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12864-021-07418-3.

Evaluation of mutation rates, mosaicism and off target mutations when injecting Cas9 mRNA or protein for genome editing of bovine embryos

The CRISPR/Cas9 genome editing tool has the potential to improve the livestock breeding industry by allowing for the introduction of desirable traits. Although an efficient and targeted tool, the CRISPR/Cas9 system can have some drawbacks, including off-target mutations and mosaicism, particularly when used in developing embryos. Here, we introduced genome editing reagents into single-cell bovine embryos to compare the effect of Cas9 mRNA and protein on the mutation efficiency, level of mosaicism, and evaluate potential off-target mutations utilizing next generation sequencing. We designed guide-RNAs targeting three loci (POLLED, H11, and ZFX) in the bovine genome and saw a significantly higher rate of mutation in embryos injected with Cas9 protein (84.2%) vs. Cas9 mRNA (68.5%). In addition, the level of mosaicism was higher in embryos injected with Cas9 mRNA (100%) compared to those injected with Cas9 protein (94.2%), with little to no unintended off-target mutations detected. This study demonstrated that the use of gRNA/Cas9 ribonucleoprotein complex resulted in a high editing efficiency at three different loci in bovine embryos and decreased levels of mosaicism relative to Cas9 mRNA. Additional optimization will be required to further reduce mosaicism to levels that make single-step embryo editing in cattle commercially feasible.

Harnessing endogenous repair mechanisms for targeted gene knock-in of bovine embryos

Introducing useful traits into livestock breeding programs through gene knock-ins has proven challenging. Typically, targeted insertions have been performed in cell lines, followed by somatic cell nuclear transfer cloning, which can be inefficient. An alternative is to introduce genome editing reagents and a homologous recombination (HR) donor template into embryos to trigger homology directed repair (HDR). However, the HR pathway is primarily restricted to actively dividing cells (S/G2-phase) and its efficiency for the introduction of large DNA sequences in zygotes is low. The homology-mediated end joining (HMEJ) approach has been shown to improve knock-in efficiency in non-dividing cells and to harness HDR after direct injection of embryos. The knock-in efficiency for a 1.8 kb gene was contrasted when combining microinjection of a gRNA/Cas9 ribonucleoprotein complex with a traditional HR donor template or an HMEJ template in bovine zygotes. The HMEJ template resulted in a significantly higher rate of gene knock-in as compared to the HR template (37.0% and 13.8%; P < 0.05). Additionally, more than a third of the knock-in embryos (36.9%) were non-mosaic. This approach will facilitate the one-step introduction of gene constructs at a specific location of the bovine genome and contribute to the next generation of elite cattle.

CRISPR in livestock: From editing to printing

Precise genome editing of large animals applied to livestock and biomedicine is nowadays possible since the CRISPR revolution. This review summarizes the latest advances and the main technical issues that determine the success of this technology. The pathway from editing to printing, from engineering the genome to achieving the desired animals, does not always imply an easy, fast and safe journey. When applied in large animals, CRISPR involves time- and cost-consuming projects, and it is mandatory not only to choose the best approach for genome editing, but also for embryo production, zygote microinjection or electroporation, cryopreservation and embryo transfer. The main technical refinements and most frequent questions to improve this disruptive biotechnology in large animals are presented. In addition, we discuss some CRISPR applications to enhance livestock production in the context of a growing global demand of food, in terms of increasing efficiency, reducing the impact of farming on the environment, enhancing pest control, animal welfare and health. The challenge is no longer technical. Controversies and consensus, opportunities and threats, benefits and risks, ethics and science should be reconsidered to enter into the CRISPR era.

Livestock Gene Editing by One-step Embryo Manipulation

The breakthrough and rapid advance of clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) technology has enabled the efficient generation of gene-edited animals by one-step embryo manipulation. Clustered regularly interspaced short palindromic repeat/CRISPR-associated protein 9 delivery to the livestock embryos has been typically achieved by intracytoplasmic microinjection; however, recent studies show that electroporation may be a reliable, efficient, and practical method for CRISPR/Cas9 delivery. The source of embryos used to generate gene-edited animals varies from in vivo to in vitro produced, depending mostly on the species of interest. In addition, different Cas9 and gRNA reagents can be used for embryo editing, ranging from Cas9-coding plasmid or messenger RNA to Cas9 recombinant protein, which can be combined with in vitro transcribed or synthetic guide RNAs. Mosaicism is reported as one of the main problems with generation of animals by embryo editing. On the other hand, off-target mutations are rarely found in livestock derived from one-step editing. In this review, we discussed these and other aspects of generating gene-edited animals by single-step embryo manipulation.

Redesigning small ruminant genomes with CRISPR toolkit: Overview and perspectives

Genetic modification is a rapidly developing field in which numerous significant breakthroughs have been achieved. Over the last few decades, genetic modification has evolved from insertional transgenesis to gene targeting and editing and, more recently, to base and prime editing using CRISPR-derived systems. Currently, CRISPR-based genome editing systems are showing great potential for generating gene-edited offspring with defined genetic characteristics. Domestic small ruminants (sheep and goats) have shown great potential as large animal models for genome engineering. Ovine and caprine genomes have been engineered using CRISPR-based systems for numerous purposes. These include generating superior agricultural breeds, expression of therapeutic agents in mammary glands, and developing animal models to be used in the study of human genetic disorders and regenerative medicine. The creation of these models has been facilitated by the continuous emergence and development of genetic modification tools. In this review, we provide an overview on how CRISPR-based systems have been used in the generation of gene-edited small ruminants through the two main pathways (embryonic microinjection and somatic cell nuclear transfer) and highlight the ovine and caprine genes that have been targeted via knockout, knockin, HDR-mediated point mutation, and base editing approaches, as well as the aims of these specific manipulations.

Sheep and Goat Genome Engineering: From Random Transgenesis to the CRISPR Era

Sheep and goats are valuable livestock species that have been raised for their production of meat, milk, fiber, and other by-products. Due to their suitable size, short gestation period, and abundant secretion of milk, sheep and goats have become important model animals in agricultural, pharmaceutical, and biomedical research. Genome engineering has been widely applied to sheep and goat research. Pronuclear injection and somatic cell nuclear transfer represent the two primary procedures for the generation of genetically modified sheep and goats. Further assisted tools have emerged to enhance the efficiency of genetic modification and to simplify the generation of genetically modified founders. These tools include sperm-mediated gene transfer, viral vectors, RNA interference, recombinases, transposons, and endonucleases. Of these tools, the four classes of site-specific endonucleases (meganucleases, ZFNs, TALENs, and CRISPRs) have attracted wide attention due to their DNA double-strand break-inducing role, which enable desired DNA modifications based on the stimulation of native cellular DNA repair mechanisms. Currently, CRISPR systems dominate the field of genome editing. Gene-edited sheep and goats, generated using these tools, provide valuable models for investigations on gene functions, improving animal breeding, producing pharmaceuticals in milk, improving animal disease resistance, recapitulating human diseases, and providing hosts for the growth of human organs. In addition, more promising derivative tools of CRISPR systems have emerged such as base editors which enable the induction of single-base alterations without any requirements for homology-directed repair or DNA donor. These precise editors are helpful for revealing desirable phenotypes and correcting genetic diseases controlled by single bases. This review highlights the advances of genome engineering in sheep and goats over the past four decades with particular emphasis on the application of CRISPR/Cas9 systems.