Effects of vacuum level and pulsation rate on milk ejection and milk flow traits in Tunisian dairy camels (Camelus dromedarius)

History of a dairy camel (NAQA) and machine milking in Saudi Arabia; challenges and prospective

Over the past two decades, there has been a noteworthy surge in the attention and interest surrounding camel rearing and camel milk production in Saudi Arabia. This focus has emanated from diverse stakeholders including the general public, camel breeders, and researchers. While limited quantities of camel pasteurized milk currently available in selected showrooms, the sale of raw milk near camel enclosures remains prevalent. Recent developments include the inauguration of a modernized, opulent showroom in Riyadh exclusively dedicated to showcasing camel milk and its derivatives. The commencement of machine camel milking trials in Saudi Arabia traces back to 2003 when a portable single-bucket cow milking machine was initially tested at the Al-Jouf Range and Camel Research Center in Sakaka city. Subsequently, a company in the northern region of Saudi Arabia emerged the nation's first semi-automatic camel milking line in 2008, which continues to operate to this day. However, these endeavors, while pioneering, lag behind contemporary milking technologies prevalent in dairy farms focused on cows. Despite these strides, there exists a notable dearth of comprehensive data encompassing critical aspects of dairy camel farming. Absence of information on dairy camel and total seasonal milk yields, scientific data on machine milkability, and established production standards and characteristics for female camel milk hinders the sector's progress. This review endeavors to elucidate the obstacles and challenges hindering the widespread adoption of camel machine milking and the implementation of good camel management practices. It also outlines prospective measures aimed at overcoming these challenges for a more robust future for camel as a productive livestock in Saudi Arabia. With global climate changes, crises of protein and water shortages worldwide, and the remarkable production potentials of camels, this exploration aims to contribute to the sustainable development of camel farming in the context of evolving global challenges and opportunities.

Study of the Milkability of the Mediterranean Italian Buffalo and the Tunisian Maghrebi Camel According to Parity and Lactation Stage

While considered as hard milkers, both buffaloes and camels are milked with equipment destined for dairy cows based on external morphological similarities with this species. This work aimed to study similarities and differences in milkability traits between Mediterranean buffaloes and Maghrebi she-camels and to evaluate the effect of parity and lactation stage. A total of 422 milk flow curves recorded with an electronic milkmeter (Lactocorder®) for both species were accessed. Milking characteristics including milk yield per milking, peak milk flow, average milk flow, duration of the main milking phase, duration of total milking, duration of various phases of milk flow, lag time and time to milk ejection, stripping yield, overmilking time and incidence of bimodal milk flow curves were evaluated for both species. Results showed that the values of milk yield per milking, duration of the main milking phase and duration of total milking were higher in buffaloes (3.98 ± 0.10 kg; 4.07 ± 0.11 min; 9.89 ± 0.21 min, respectively) compared to camels (3.51 ± 0.08 kg; 3.05 ± 0.09 min; 3.76 ± 0.09 min, respectively). However, camels had significantly higher peak and average milk flow (2.45 ± 0.07 kg/min and 1.16 ± 0.03 kg/min, respectively). Camels took significantly less time for milk ejection to occur. Only 15.49% of recorded curves were bimodal in buffaloes while 34.93% of bimodal curves were recorded for camels. Overmilking was significantly higher in buffaloes (3.64 ± 0.21 min vs. 0.29 ± 0.02 min). Parity and lactation stage had a significant effect on most studied milking traits suggesting the need for some particular practices with primiparous animals and animals at different levels of lactation for both species.

Influence of milking units and working vacuum level on the mechanical milking of goats

The objectives of this study were to evaluate and compare the effect of working vacuum levels (35 and 44 kPa) and liners dimensions (mouthpiece lip diameter and overall length, 20–185 and 22–170 mm) on the main milking characteristics of goats. The results highlight that both the working vacuum level and the liner dimension have influenced the milk flow curve parameters. The maximum variations were found for peak flow rate, which increased significantly with liner dimensions of 20–185 mm at a working vacuum level of 44 kPa as well as average milk flow rate and for plateau phase duration. The incorrect adoption of operative parameters and unsuitable milking machine components, might affect the performance of the mechanical milking and negatively affecting animal productions and welfare.

Oxytocin and cortisol release during suckling, hand-milking and machine milking in camels

This research paper addresses the hypothesis that oxytocin (OT) could be released during suckling and during milking with and without the presence of a calf and that this release could be regulated by maternal behaviour. Plasma concentration patterns of OT and cortisol (CORT) were measured in six Tunisian dromedary camels during 2 suckling episodes, 2 manual milking episodes with calves beside the mother and 2 machine milking episodes without calves present. Various patterns of OT release were observed between each camel including specific two peak release patterns. Higher plasma OT concentrations were found during the suckling and hand-milking episodes with simultaneous suckling of calves, than during the machine milking episodes without calves. Exclusive mechanical milking episodes also evoked significant mean OT release, although greatly reduced compared to suckling and hand milking. The low basal levels and classical CORT release patterns suggested non-stressful management practices were used and there were very limited differences in udder stimulation between managements. The OT release induced by exclusive suckling and suckling together with hand-milking gives a reference point for what a good milk ejection stimulation is in camels. The important and specific reduction of OT release during machine milking without the calf present could be a physiological consequence of the maternal behaviour (selectivity for the own young) and to a lesser extent explained by a lower stimulation by machine milking.

Machine Milkability of Dromedary Camels: Correlation between Udder Morphology and Milk Flow Traits

Simple Summary

The relation among udder and teat characteristics and milkability traits in dairy animals is well investigated in dairy ruminants but very little knowledge is available on camels. In this experiment, milk flow curves were recorded along with udder and teats’ measurements for 32 dairy camels. This study revealed that machine milked camels had well developed teats and udders with large variability in size and shape. Daily milk yield, peak and average milk flow rates were highly and positively correlated with teat diameter and udder depth. However, selection scheme based on dairy potential only could lead to aversive udder drive and significant degradation of the external morphology of the udder. Thus, our study gave first elements for morphological selection based on machine milking characteristics.

Abstract

This study aims to measure mammary morphological traits with a functional influence on machine milking ability of Tunisian Camels (Camelus dromedarius) and their evolution according to the stage of lactation and parity. Udder and teat measurements were recorded before morning milking and associated with the measurement of milk emission kinetics parameters evaluated with Lactocorder^® devices (WMB AG, Balgache, Switzerland) and observations. Three main teat shapes were recorded and their dimensions evolved with parity and stage of lactation. The milk flow curves were classified into three main types according to their maximum and average flow rates and they also evolve according to parity and stage of lactation. An average of 41% of the milk flow curves was bimodal. The correlations showed that some morphological traits were unfavorable to rapid milking and that these increase with parity. Therefore, this study provides the first elements for a morphological selection associated with an aptitude for mechanical milking which appears rather good in our dromedaries. Nevertheless, it will be necessary to monitor a possible negative evolution of the functional and anatomical traits of the udders during the career of the animals.

Review of present knowledge on machine milking and intensive milk production in dromedary camels and future challenges

The camel dairy industry has gone through major development in the last decade. The world's first large-scale camel dairy farm was established 10 years ago in Dubai, United Arab Emirates, and since then, several commercial and scientific projects have been started, and more studies have been published demonstrating increasing interest in camel milk. The aims of this paper are to summarize relevant published data on factors influencing milk production under intensive management, compare those with our own observations obtained from Emirates Industry for Camel Milk and Products (EICMP), and highlight areas of research that are indispensable for further development. As in other species, the most important factors influencing milk yield are genetic and individual variation, age, parity, stage of lactation, nutrition, management, season, photoperiod, etc. However, the precise role of the various factors has not been thoroughly studied in camels and based on our understanding of the basic physiological processes, endocrine control is minimal. In addition, machine milking of dromedaries is still at early stage and requires research for improvement of the technology and defining factors affecting and improving milk ejection. The role of environment (like photoperiod, nutrition) should also be investigated as there is significant annual variation both in milk quantity and quality that might influence the processing characteristics of raw camel milk. The large pool of animals and thoroughly recorded data at EICMP provide an excellent opportunity for increasing milk production and improving milk quality using various methods, like feeding, management, reproduction, selection, and breeding.