Genome characteristics dictate poly-R-(3)-hydroxyalkanoate production in Cupriavidus necator H16

Advancements in genetic engineering for enhanced Polyhydroxyalkanoates (PHA) production: a comprehensive review of metabolic pathway manipulation and gene deletion strategies

Polyhydroxyalkanoates (PHA) are bioplastics produced by few bacteria as intracellular lipid inclusions under excess carbon source and nutrient-deprived conditions. These polymers are biodegradable and resemble petroleum-based plastics. The rising environmental concerns have increased the demand for PHA, but the low yield in wild-type bacterial strains limits large-scale production. An improvement in the PHA production can be achieved by genetically engineering the wild-type bacterial strains by removing competitive pathways that divert the metabolites away from PHA biosynthesis, cloning strong promotors to overexpress the genes involved in PHA biosynthesis and constructing non-native metabolic pathways that feed the metabolites for PHA production. The desired monomers in the PHA polymers were obtained by elimination of genes involved in PHA biosynthetic pathway. The chain length degradation specific-gene deletion of β-oxidation pathway resulted in the accumulation of PHA monomers having high carbon chain length. A controlled accumulation of monomers in the PHA polymer was achieved by constructing novel pathways in the bacteria and deleting native genes of competitive pathways from the genome of non-PHA producers. The present review attempts to showcase the novel genetic modification approaches conducted so far to enhance the PHA production with a special focus on metabolic pathway gene deletion in various bacteria.

High-temperature stimulation enhances polyhydroxyalkanoates accumulation in thermophile Aeribacillus pallidus BK1

Polyhydroxyalkanoates (PHAs) are intracellular storage polymers that enhance bacterial resistance in environments. While the role of PHAs regulation in thermophiles under high-temperature stimulation is understudied, this work investigates Aeribacillus pallidus BK1, a thermophile with heat resistance up to 155 °C. Our results showed that A. pallidus's PHAs yield was 1.45 g/L. After 90 °C and 121 °C stimulations, the PHAs yield doubled to 3.33 g/L. The PHAs ratios increased from 35.63 % (60 °C) to 75.46 % (90 °C) and 77.15 % (121 °C). RNA-seq analysis revealed a common strategy of activating glucose transporters to enhance glucose uptake at both temperatures. At 90 °C, A. pallidus BK1 prioritized PHAs accumulation over the TCA cycle. At 121 °C, PHAs production was further enhanced by upregulating monomer polymerization and downregulating acetyl-CoA carboxylase expression. These findings offered valuable insights into the high-temperature defense mechanisms of thermophiles and suggested that A. pallidus BK1 holds promise as a bio-production platform for PHAs production under thermal stimulation.

Production of polyhydroxyalkanoates as a feasible alternative for an integrated multiproduct lignocellulosic biorefinery

Polyhydroxyalkanoates (PHAs) are considered an alternative to fossil fuel-based plastics. However, in spite of their interesting properties and their multiple applications, PHAs have not taken off as an industrial development. The reason is mainly due to the associated high-production costs, which represent a significant constraint. In recent years, the interest in lignocellulosic biomass (LCB) derived from crop, forestry or municipal waste by-products has been growing, since LCB is plentiful, cheap, renewable and sustainable. On this matter, the valorization of LCB into PHAs represents a promising route within circular economy strategies. However, much effort still needs to be made to improve the bioconversion yields and to enhance PHA production efficiency. So, this review focuses on reviewing the different options for PHA synthesis from LCB, stressing the progress in biomass deconstruction, enzymatic hydrolysis and microbial conversion. In addition, some of the current biological strategies for improving the process of bioconversion are discussed.

Problems and corresponding strategies for converting CO2 into value-added products in Cupriavidus necator H16 cell factories

Elevated CO2 emissions have substantially altered the worldwide climate, while the excessive reliance on fossil fuels has exacerbated the energy crisis. Therefore, the conversion of CO2 into fuel, petroleum-based derivatives, drug precursors, and other value-added products is expected. Cupriavidus necator H16 is the model organism of the "Knallgas" bacterium and is considered to be a microbial cell factory as it can convert CO2 into various value-added products. However, the development and application of C. necator H16 cell factories has several limitations, including low efficiency, high cost, and safety concerns arising from the autotrophic metabolic characteristics of the strains. In this review, we first considered the autotrophic metabolic characteristics of C. necator H16, and then categorized and summarized the resulting problems. We also provided a detailed discussion of some corresponding strategies concerning metabolic engineering, trophic models, and cultivation mode. Finally, we provided several suggestions for improving and combining them. This review might help in the research and application of the conversion of CO2 into value-added products in C. necator H16 cell factories.

Enhanced supply of acetyl-CoA by exogenous pantothenate kinase promotes synthesis of poly(3-hydroxybutyrate)

BACKGROUND

Coenzyme A (CoA) is a carrier of acyl groups. This cofactor is synthesized from pantothenic acid in five steps. The phosphorylation of pantothenate is catalyzed by pantothenate kinase (CoaA), which is a key step in the CoA biosynthetic pathway. To determine whether the enhancement of the CoA biosynthetic pathway is effective for producing useful substances, the effect of elevated acetyl-CoA levels resulting from the introduction of the exogenous coaA gene on poly(3-hydroxybutyrate) [P(3HB)] synthesis was determined in Escherichia coli, which express the genes necessary for cyanobacterial polyhydroxyalkanoate synthesis (phaABEC).

RESULTS

E. coli containing the coaA gene in addition to the pha genes accumulated more P(3HB) compared with the transformant containing the pha genes alone. P(3HB) production was enhanced by precursor addition, with P(3HB) content increasing from 18.4% (w/w) to 29.0% in the presence of 0.5 mM pantothenate and 16.3%-28.2% by adding 0.5 mM β-alanine. Strains expressing the exogenous coaA in the presence of precursors contained acetyl-CoA in excess of 1 nmol/mg of dry cell wt, which promoted the reaction toward P(3HB) formation. The amount of acetate exported into the medium was three times lower in the cells carrying exogenous coaA and pha genes than in the cells carrying pha genes alone. This was attributed to significantly enlarging the intracellular pool size of CoA, which is the recipient of acetic acid and is advantageous for microbial production of value-added materials.

CONCLUSIONS

Enhancing the CoA biosynthetic pathway with exogenous CoaA was effective at increasing P(3HB) production. Supplementing the medium with pantothenate facilitated the accumulation of P(3HB). β-Alanine was able to replace the efficacy of adding pantothenate.

Production of polyhydroxyalkanoates by the thermophile Cupriavidus cauae PHS1

Thermophilic production of polyhydroxyalkanoate is considered a very promising way to overcome the problems that may arise when using mesophilic strains. This study reports the first thermophilic polyhydroxybutyrate-producing Cupriavidus species, which are known as the best polyhydroxybutyrate-producing microorganisms. Cupriavidus cauae PHS1 harbors a phbCABR cluster with high similarity to the corresponding proteins of C. necator H16 (80, 93, 96, and 97 %). This strain can produce polyhydroxybutyrate from a range of substrates, including acetate (5 g/L) and phenol (1 g/L), yielding 7.6 % and 18.9 % polyhydroxybutyrate, respectively. Moreover, the strain produced polyhydroxybutyrate at temperatures ranging from 25 to 50 °C, with the highest polyhydroxybutyrate content (47 °C) observed at 45 °C from gluconate. Additionally, the strain could incorporate 3-hydroxyvalerate (12.5 mol. %) into the polyhydroxybutyrate polymer using levulinic acid as a precursor. Thus, Cupriavidus cauae PHS1 may be a promising polyhydroxybutyrate producer as alternative for mesophilic polyhydroxybutyrate-producing Cupriavidus species.

Formation of polyhydroxyalkanoates using agro and industrial waste as a substrate - a review

In the present scenario, rising environmental concerns of non-biodegradable plastic pollution and depletion of petroleum based raw materials lead to the development of biopolymers. The biodegradability of biopolymers gives them a specific advantage for the environmental concerns. Polyhydroxyalkanoates (PHAs) are a type of biopolymers which are synthesized by microorganisms. Although there are different substrates available in pure forms which are currently used in the production of PHA, 40% of production cost depends on the expensive substrate which is a major disadvantage and make it far from many applications. The use of an inexpensive carbon source which is high in organic matter content such as waste streams of process industries can make this process viable and diminish PHA production cost. This study explores the current research initiatives on various agricultural and industrial waste feedstocks, formulations and processing conditions for producing PHA in a way that is both inexpensive and beneficial to the environment. The creation of fermentation conditions and metabolic engineering techniques for promoting microbial growth and PHA synthesis were also discussed in the review.

Polyhydroxyalkanoate Production by Caenibius tardaugens from Steroidal Endocrine Disruptors

The α-proteobacterium Caenibius tardaugens can use estrogens and androgens as the sole carbon source. These compounds are steroidal endocrine disruptors that are found contaminating soil and aquatic ecosystems. Here, we show that C. tardaugens, which has been considered as a valuable biocatalyst for aerobic steroidal hormone decontamination, is also able to produce polyhydroxyalkanoates (PHA), biodegradable and biocompatible polyesters of increasing biotechnological interest as a sustainable alternative to classical oil-derived polymers. Steroid catabolism yields a significant amount of propionyl-CoA that is metabolically directed towards PHA production through condensation into 3-ketovaleryl-CoA, rendering a PHA rich in 3-hydroxyvalerate. To the best of our knowledge, this is the first report where PHAs are produced from steroids as carbon sources.

The over-expression of phasin and regulator genes promoting the synthesis of polyhydroxybutyrate in Cupriavidus necator H16 under non-stress conditions

Cupriavidus necator H16 is an ideal strain for polyhydroxybutyrate (PHB) production from CO₂. Low-oxygen-stress can induce PHB synthesis in C. necator H16 while reducing bacterial growth under chemoautotrophic culture. The optimum growth and PHB synthesis of C. necator H16 cannot be achieved simultaneously, which restricts PHB production. The present study was initiated to address the issue through comparative transcriptome and gene function analysis. Firstly, the comparative transcriptome of C. necator H16 chemoautotrophically cultured under low-oxygen-stress and non-stress conditions was studied. Three types of transcription different genes were discovered: PHB enzymatic synthesis, PHB granulation, and regulators. Under low-oxygen-stress condition, acetoacetyl-CoA reductase gene phaB2, PHB synthase gene phaC2, phasins genes phaP1 and phaP2, regulators genes uspA and rpoN were up-regulated 3.0, 2.5, 1.8, 2.7, 3.5, 1.6 folds, respectively. Secondly, the functions of up-regulated genes and their applications in PHB synthesis were further studied. It was found that the over-expression of phaP1, phaP2, uspA, and rpoN can induce PHB synthesis under non-stress condition, while phaB2 and phaC2 have no significant effect. Under the optimum condition, PHB percentage content in C. necator H16 was respectively increased by 37.2%, 28.4%, 15.8%, and 41.0% with the over-expression of phaP1, phaP2, uspA, and rpoN, and the corresponding PHB production increased by 49.8%, 42.9%, 47.0%, and 77.5% under non-stress chemoautotrophic conditions. Similar promotion by phaP1, phaP2, uspA, and rpoN was observed in heterotrophically cultured C. necator H16. The PHB percentage content and PHB production were respectively increased by 54.4% and 103.1% with the over-expression of rpoN under non-stress heterotrophic conditions. Importance Microbial fixation of CO₂ is an effective way to reduce greenhouse gases. Some microbes such as C. necator H16 usually accumulate PHB when they grow under stress. Low-oxygen-stress can induce PHB synthesis when C. necator H16 is autotrophically cultured with CO₂, H₂, and O₂, while under stress, growth is restricted and total PHB yield is reduced. Achieving the optimal bacterial growth and PHB synthesis at the same time is an ideal condition for transforming CO₂ into PHB by C. necator H16. The present study was initiated to clarify the molecular basis of low-oxygen-stress promoting PHB accumulation and to realize the optimal PHB production by C. necator H16. Genes up-regulated under non-stress conditions were identified through comparative transcriptome analysis and over-expression of phasin and regulator genes were demonstrated to promote PHB synthesis in C. necator H16.

Complete Genome Sequence of Cupriavidus sp. Strain EM10, Isolated from Sewage Sludge

Cupriavidus species have been known as versatile microorganisms in the field of industrial biotechnology. Cupriavidus sp. strain EM10 was isolated from sewage sludges. Here, we report the complete genome sequence of this bacterium, which contains 6,658,510 bp (GC content, 65.12%) and 6,248 genes.

Transcriptome differences between Cupriavidus necator NH9 grown with 3-chlorobenzoate and that grown with benzoate

RNA-seq analysis of Cupriavidus necator NH9, a 3-chlorobenzoate degradative bacterium, cultured with 3-chlorobenzaote and benzoate, revealed strong induction of genes encoding enzymes in degradation pathways of the respective compound, including the genes to convert 3-chlorobenzaote and benzoate to chlorocatechol and catechol, respectively, and the genes of chlorocatechol ortho-cleavage pathway for conversion to central metabolites. The genes encoding transporters, components of the stress response, flagellar proteins, and chemotaxis proteins showed altered expression patterns between 3-chlorobenzoate and benzoate. Gene Ontology enrichment analysis revealed that chemotaxis-related terms were significantly upregulated by benzoate compared with 3-chlorobenzoate. Consistent with this, in semisolid agar plate assays, NH9 cells showed stronger chemotaxis to benzoate than to 3-chlorobenzoate. These results, combined with the absence of genes related to uptake/chemotaxis for 3-chlorobenzoate located closely to the degradation genes of 3-chlorobenzoate, suggested that NH9 has not fully adapted to the utilization of chlorinated benzoate, unlike benzoate, in nature.

Improving thermal and mechanical properties of biomass-based polymers using structurally ordered polyesters from ricinoleic acid and 4-hydroxycinnamic acids

Biomass-based copolymers with alternating ricinoleic acid and 4-hydroxycinnamic acid derivatives (p-coumaric acid, ferulic acid, and sinapinic acid) exhibit a repeating structure based on soft and hard segments, derived from ricinoleic and 4-hydroxycinnamic acids, respectively. To achieve this alternating sequence, copolymers were synthesised by the self-condensation of hetero-dimeric monomers derived by the pre-coupling of methyl ricinolate and 4-hydroxycinnamic acid. The glass transition temperature (T_g) was observed to increase as the number of methoxy groups on the main chain increased; the T_g values of poly(coumaric acid-alt-ricinoleic acid), poly(ferulic acid-alt-ricinoleic acid), and poly(sinapinic acid-alt-ricinoleic acid) are −15 °C, −4 °C, and 24 °C respectively, 58 °C, 69 °C, and 97 °C higher than that of poly(ricinoleic acid). The polymers were processed into highly flexible, visually transparent films. Among them, poly(sinapinic acid-alt-ricinoleic acid) bearing two methoxy groups on each cinnamoyl unit, is mechanically the strongest polymer, with an elastic modulus of 126.5 MPa and a tensile strength at break of 15.47 MPa.

The synthesis of structurally ordered polyesters derived from ricinoleic acid and 4-hydroxycinnamic acids improves the thermal and mechanical properties.

Evolutionary relationships between the transcriptional repressors of the polyhydroxyalkanoate reserve storage system in prokaryotes: Conserved but phylogenetically heterogeneous

Bacteria and archaea accumulate cytoplasmic polyhydroxyalkanoate (PHA) granules under nutrient-limited conditions with excess carbon. The transcriptional regulatory (TR) proteins found on the surface of PHA granules act as repressors as well as activators for the expression of major surface proteins called phasins. Until now, detailed information on the evolutionary relationships between these transcription regulators has not been available. Here, we conducted homology searches and analyzed information available for the domains and protein families of the TR proteins through phylogenetic studies. A total of 282 TR proteins were identified and further classified into four distinct subfamilies based upon the presence of conserved motifs: PHB_acc, TetR-like, AbrB-like, and PadR-like. Depending upon the particular family, the DNA-binding domains were located at either the N- or C-terminus. Our results indicated that TR proteins containing the PHB_acc domain are highly conserved within the bacteria, while other TR proteins are present only within archaea (AbrB-like), gram positive bacteria (PadR-like), or the Pseudomonas genera (TetR-like). The repression domains are charged, hydrophobic, and rich in leucine or glutamine. In phylogenetic analyses, many groups of TR proteins were clustered together according to identical domain architectures showing the independent origins of the TR proteins in the PHA reserve storage system. Further analyses revealed that the TR proteins have experienced multiple gene duplications across prokaryotes. Thus, this study investigated the evolutionary framework of TR proteins and has provided a comprehensive catalog of TR proteins for ongoing studies to characterize the functions of these proteins within diverse organisms.

Comparative genome analysis of completely sequenced Cupriavidus genomes provides insights into the biosynthetic potential and versatile applications of Cupriavidus alkaliphilus ASC-732

The genome analysis of microorganisms provides valuable information to endorse more extensive research on their potential applications. In this paper, the genome of Cupriavidus alkaliphilus ASC-732, isolated from agave rhizosphere in northeastern Mexico, was analyzed and compared with the genomes of other Cupriavidus species to gain better insight into the parts in the genetic makeup responsible for essential metabolic pathways and others of biotechnological importance. Here, the key genes related to glycolysis, pentose phosphate, and the Entner-Doudoroff and tricarboxylic acid cycle pathways were predicted. Comparative genome analysis revealed that the key genes for hydrogenotrophic growth and carbon fixation pathway, i.e., those coding for hydrogenase and enzymes Calvin-Benson-Bassham cycle, are absent in C. alkaliphilus ASC-732. Furthermore, capabilities for producing polyhydroxyalkanoates and extracellular polysaccharide matrix and degrading xenobiotics were found, and the related pathways are explained. Moreover, biofilm formation and the production of exopolysaccharides and polyhydroxyalkanoates were corroborated with crystal violet staining, calcofluor, and Nile red fluorochromes, confirming the presence of the products of the active genes in these pathways and their related metabolic routes, respectively. Additionally, a large group of genes essential for the resistance and detoxification of several heavy metals were also found. Thus, the present study demonstrates that this strain can respond to various environmental signals, such as energy source, nutrient limitations, virulence, and extreme metals concentration, indicating the possibility to foster C. alkaliphilus ASC-732 in diverse biotechnological applications.

Complete Genome Sequence of 3-Chlorobenzoate-Degrading Bacterium Cupriavidus necator NH9 and Reclassification of the Strains of the Genera Cupriavidus and Ralstonia Based on Phylogenetic and Whole-Genome Sequence Analyses

Cupriavidus necator NH9, a 3-chlorobenzoate (3-CB)-degrading bacterium, was isolated from soil in Japan. In this study, the complete genome sequence of NH9 was obtained via PacBio long-read sequencing to better understand the genetic components contributing to the strain's ability to degrade aromatic compounds, including 3-CB. The genome of NH9 comprised two circular chromosomes (4.3 and 3.4 Mb) and two circular plasmids (427 and 77 kb) containing 7,290 coding sequences, 15 rRNA and 68 tRNA genes. Kyoto Encyclopedia of Genes and Genomes pathway analysis of the protein-coding sequences in NH9 revealed a capacity to completely degrade benzoate, 2-, 3-, or 4-hydroxybenzoate, 2,3-, 2,5-, or 3,4-dihydroxybenzoate, benzoylformate, and benzonitrile. To validate the identification of NH9, phylogenetic analyses (16S rRNA sequence-based tree and multilocus sequence analysis) and whole-genome sequence analyses (average nucleotide identity, percentage of conserved proteins, and tetra-nucleotide analyses) were performed, confirming that NH9 is a C. necator strain. Over the course of our investigation, we noticed inconsistencies in the classification of several strains that were supposed to belong to the two closely-related genera Cupriavidus and Ralstonia. As a result of whole-genome sequence analysis of 46 Cupriavidus strains and 104 Ralstonia strains, we propose that the taxonomic classification of 41 of the 150 strains should be changed. Our results provide a clear delineation of the two genera based on genome sequences, thus allowing taxonomic identification of strains belonging to these two genera.