Highly efficient phenol degradation in a batch moving bed biofilm reactor: benefiting from biofilm-enhancing bacteria

Biodegradation of phenolic pollutants and bioaugmentation strategies: A review of current knowledge and future perspectives

The widespread use of phenolic compounds renders their occurrence in various environmental matrices, posing ecological risks especially the endocrine disruption effects. Biodegradation-based techniques are efficient and cost-effective in degrading phenolic pollutants with less production of secondary pollution. This review focuses on phenol, 4-nonylphenol, 4-nitrophenol, bisphenol A and tetrabromobisphenol A as the representatives, and summarizes the current knowledge and future perspectives of their biodegradation and the enhancement strategy of bioaugmentation. Biodegradation and isolation of degrading microorganisms were mainly investigated under oxic conditions, where phenolic pollutants are typically hydroxylated to 4-hydroxybenzoate or hydroquinone prior to ring opening. Bioaugmentation efficiencies of phenolic pollutants significantly vary under different application conditions (e.g., increased degradation by 10-95% in soil and sediment). To optimize degradation of phenolic pollutants in different matrices, the factors that influence biodegradation capacity of microorganisms and performance of bioaugmentation are discussed. The use of immobilization strategy, indigenous degrading bacteria, and highly competent exogenous bacteria are proposed to facilitate the bioaugmentation process. Further studies are suggested to illustrate 1) biodegradation of phenolic pollutants under anoxic conditions, 2) application of microbial consortia with synergistic effects for phenolic pollutant degradation, and 3) assessment on the uncertain ecological risks associated with bioaugmentation, resulting from changes in degradation pathway of phenolic pollutants and alterations in structure and function of indigenous microbial community.

Impact of gradually-achieved high phenol loads on the nitrification and COD removal performance of an MBBR fed with synthetic wastewater

Phenol is a noteworthy pollutant, found in effluents of many industrial processes, like oil refining and drugs production, which can impair the treatment efficiency of bioreactors. This study evaluated the performance of phenol, COD, and nitrogen removal of an aerobic bench-scale Moving Bed Biofilm Reactor (MBBR) exposed to gradually increasing phenol content over 233 days. The reactor had Hydraulic Retention Time (HRT) set at 3 h and 40% filling degree (K1 media), and was fed with synthetic wastewater containing phenol (10, 20, 50, 100, 250 and 400 mg/L), glucose (400 mgCOD/L), and 40 mgN-NH3/L. Phenol, COD, and ammoniacal nitrogen removal averages were high - above 88%, 81%, and 82%, respectively -, even when the MBBR was exposed to the greatest phenol loads, indicating that the biofilm was able to acclimate and resist high phenol concentrations. However, the intense EPS production revealed the impact caused by phenol to the biofilm from the concentration of 250 mg/L onwards. Even though, at this concentration, the average removals of COD and phenol were 87.2% and 89.7%. The removal of ammoniacal nitrogen by nitrification was compromised, being 91.6% of the ammoniacal nitrogen removed by assimilation and only 0.35% removed by nitrification. At 400 mg phenol/L, the reactor provided COD and phenol average removals equal 88.6% and 80.9%, respectively. On the last day of operation, the removal of COD dropped to 55.4% and phenol removal was equal 49.0%. Novel microscopical evaluation of the MBBR's biofilm revealed some negative effects of the phenol on the microbiota composition.

Efficacy of 2,4-Di-tert-butylphenol in Reducing Ralstonia solanacearum Virulence: Insights into the Underlying Mechanisms

Ralstonia solanacearum can induce severe wilt disease in vital crops. Therefore, there is an urgent need to develop novel antifungal solutions. The natural compound 2,4-di-tert-butylphenol (2,4-DTBP) exhibits diverse physiological activities and affects soil function. However, its specific impact on the R. solanacearum remains unclear. Here, we investigated the antimicrobial potential of 2,4-DTBP. The results demonstrated that 2,4-DTBP effectively inhibited its growth and altered morphology. In addition, it substantially impeded biofilm formation, motility, and exopolysaccharide secretion. Transcriptomic analysis revealed that 2,4-DTBP inhibited energy production and membrane transport. Additionally, 2,4-DTBP hindered the growth by interfering with the membrane permeability, reactive oxygen species (ROS) production, and electrolyte leakage. Concomitantly, this led to a significant reduction in pathogenicity, as evidenced by the biomass of R. solanacearum in the invaded roots. Overall, our data strongly support the potential utility of 2,4-DTBP as a potent antibacterial agent capable of effectively preventing the onset of bacterial wilt caused by R. solanacearum.

Biofilm formation in xenobiotic-degrading microorganisms

The increased presence of xenobiotics affects living organisms and the environment at large on a global scale. Microbial degradation is effective for the removal of xenobiotics from the ecosystem. In natural habitats, biofilms are formed by single or multiple populations attached to biotic/abiotic surfaces and interfaces. The attachment of microbial cells to these surfaces is possible via the matrix of extracellular polymeric substances (EPSs). However, the molecular machinery underlying the development of biofilms differs depending on the microbial species. Biofilms act as biocatalysts and degrade xenobiotic compounds, thereby removing them from the environment. Quorum sensing (QS) helps with biofilm formation and is linked to the development of biofilms in natural contaminated sites. To date, scant information is available about the biofilm-mediated degradation of toxic chemicals from the environment. Therefore, we review novel insights into the impact of microbial biofilms in xenobiotic contamination remediation, the regulation of biofilms in contaminated sites, and the implications for large-scale xenobiotic compound treatment.

Biofilm-based technology for industrial wastewater treatment: current technology, applications and future perspectives

The microbial community in biofilm is safeguarded from the action of toxic chemicals, antimicrobial compounds, and harsh/stressful environmental circumstances. Therefore, biofilm-based technology has nowadays become a successful alternative for treating industrial wastewater as compared to suspended growth-based technologies. In biofilm reactors, microbial cells are attached to static or free-moving materials to form a biofilm which facilitates the process of liquid and solid separation in biofilm-mediated operations. This paper aims to review the state-of-the-art of recent research on bacterial biofilm in industrial wastewater treatment including biofilm fundamentals, possible applications and problems, and factors to regulate biofilm formation. We discussed in detail the treatment efficiencies of fluidized bed biofilm reactor (FBBR), trickling filter reactor (TFR), rotating biological contactor (RBC), membrane biofilm reactor (MBfR), and moving bed biofilm reactor (MBBR) for different types of industrial wastewater treatment. Besides, biofilms have many applications in food and agriculture, biofuel and bioenergy production, power generation, and plastic degradation. Furthermore, key factors for regulating biofilm formation were also emphasized. In conclusion, industrial applications make evident that biofilm-based treatment technology is impactful for pollutant removal. Future research to address and improve the limitations of biofilm-based technology in wastewater treatment is also discussed.

Mechanisms and application of microalgae on removing emerging contaminants from wastewater: A review

This study reviews the development of the ability of microalgae to remove emerging contaminants (ECs) from wastewater. Contaminant removal by microalgae-based systems (MBSs) includes biosorption, bioaccumulation, biodegradation, photolysis, hydrolysis, and volatilization. Usually, the existence of ECs can inhibit microalgae growth and reduce their removal ability. Therefore, three methods (acclimation, co-metabolism, and algal-bacterial consortia) are proposed in this paper to improve the removal performance of ECs by microalgae. Finally, due to the high removal performance of contaminants from wastewater by algal-bacterial consortia systems, three kinds of algal-bacterial consortia applications (algal-bacterial activatedsludge, algal-bacterial biofilm reactor, and algal-bacterial constructed wetland system) are recommended in this paper. These applications are promising for ECs removal. But most of them are still in their infancy, and limited research has been conducted on operational mechanisms and removal processes. Extra research is needed to clarify the applicability and cost-effectiveness of hybrid processes.

Efficiency of various biofilm carriers and microbial interactions with substrate in moving bed-biofilm reactor for environmental wastewater treatment

In a moving bed-biofilm reactor (MBBR), the fluidization efficiency, immobilization of microbial cells, and treatment efficiency are directly influenced by the shape and pores of biofilm carriers. Moreover, the efficacy of bioremediation mainly depends on their interaction interface with microbes and substrate. This review aims to comprehend the role of different carrier properties such as material shapes, pores, and surface area on bioremediation productivity. A porous biofilm carrier with surface ridges containing spherical pores sizes > 1 mm can be ideal for maximum efficacy. It provides diverse environments for cell cultures, develops uneven biofilms, and retains various cell sizes and biomass. Moreover, the thickness of biofilm and controlled scaling shows a significant impact on MBBR performance. Therefore, the effect of these parameters in MBBR is discussed detailed in this review, through which existing literature and technical strategies that focus on the surface area as the primary factor can be critically assessed.

Bacterial biofilm and extracellular polymeric substances in the moving bed biofilm reactor for wastewater treatment: A review

Among the several biofilm-based bioreactors, moving bed biofilm reactors (MBBR) have been extensively used for wastewater treatment due to low operational costs, technical feasibility, and stability. Biofilm forming strains, e.g., Stenotrophomonas maltophila DQ01, achieved 94.21% simultaneous nitrification and denitrification (SND) and 94.43% removal of total nitrogen (TN) at a cycle time of 7 h, and a biofilm consortium consisting of Chryseobacteriumsp. andRhodobactersp. achieved 86.8% removal of total organic carbon (TOC) at hydraulic retention time (HRT) of 24 h using lab-scale MBBR. Modifications in the surface properties of the biocarrier materials achieved 99.5 ± 1.1% chemical oxygen demand (COD) and 93.6 ± 2.3% NH₄⁺-N removal, significantly higher than the conventional commercial carrier. This review article summarizes the application of MBBR technology for wastewater treatment. The importance of bacterial biofilm and extracellular polymeric substances (EPS), anammox-n-DAMO coupled processes, and carrier surface modifications in MBBR technology have also been discussed.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Light-assisted Ullmann coupling of phenols and aryl halides: The synergetic effect between plasmonic copper nanoparticles and carbon nanotubes from various sources

Utilizing light and plastic wastes as resources to turn the wasted phenols and hazardous aryl halides into value added chemicals seems to be an attractive idea for alleviating the energy crisis and environmental problems. In this work, we loaded plasmonic copper nanoparticles (Cu NPs) onto carbon nanotubes (CNTs) from various sources including commercial CNTs and those derived from plastic wastes. Under visible-light irradiation, the catalyst could efficiently convert phenols and aryl halides to diaryl ethers. Similar with commercial CNTs, excellent activity is also achieved when utilizing CNTs derived from different kinds of plastic wastes as support for the system. Further investigation shows that the visible-light irradiation and light-excited plasmonic Cu NPs are necessary to inhibit the phenol degradation on CNTs and in turn promote the cross-coupling of phenol and aryl halides. Compared with metal oxides and other carbon materials, the excellent capability of CNTs to absorb light, to convert light to heat, and to adsorb both two reactants simultaneously are critical to enhance the activity of Cu NPs, achieving the high yield of diaryl ethers. We believe that this study could provide a novel strategy for catalyst design and generate a more economically-sustainable process.

Impacts of long-term electric field applied on the membrane fouling mitigation and shifts of microbial communities in EMBR for treating phenol wastewater

The membrane antifouling and shifts of microbial communities of long-term electric field applied in MBR (EMBR) for treating phenol wastewater was systematically investigated. The increased voltage increased the phenol degradation rate and slowed down the TMP increase rate in EMBR (G1-G4: 1.65 × 10^-3-8.40 × 10^-4 Mpa/d), indicated the enhancement of phenol treatment and mitigation of membrane fouling. Decrease of protein (PN)/polysaccharide (PS) in EPS increased the negative charge and decreased the hydrophobicity of sludge, thus abated its adsorption on membrane surface. The decrease of AHLs concentration attributed to the electrolysis of AHLs by the electro-generated H₂O₂. Besides, the AHLs had significantly negative correlation with QQ bacteria Rhodococcus and Stenotrophomonas enrichment and positive correlation with QS bacteria Aeromonas decrease in EMBRs, suggesting that coupling effects of voltage and QQ bacteria degraded AHLs, thus decreased EPS content which was positively correlated with AHLs concentration. Biopolymer-degrading genera (Clostridium sensu strict etc.) increased in EMBR and on membrane surface, while biofilm-forming genera (Pseudomonas etc.) decreased on membrane surface. These resulted in EPS content decrease and membrane antifouling.

High-strength wastewater treatment using microbial biofilm reactor: a critical review

Biofilm reactors retain microbial cells in the form of biofilm which is attached to free moving or fixed carrying materials, thus providing a high active biomass concentration and automatic liquid and solid separation. Nowadays, microbial biofilm reactors have been widely used in high-strength wastewater treatment where very high pollutant removal efficiency is required, which usually requires excessive space and aeration energy for conventional activated sludge-based treatment. This paper provides an overview of microbial biofilm reactors developed over the last half-century, including moving bed biofilm reactor (MBBR), trickling filter (TF) reactor, rotating biological contactor (RBC), membrane biofilm reactor (MBfR), passive aeration simultaneous nitrification and denitrification (PASND) biofilm reactor, for their applications in high-strength wastewater treatment of not only removing carbon, nitrogen, sulphur but also a variety of oxidized contaminants including perchlorate and bromate. Despite the advance of biofilm reactor that exhibits high resistance to excessive pollutants loading, its drawbacks both from engineering and microbiological point of view are reviewed. The future prospects of biofilm reactor are also discussed in this review paper.

Purification Effect of the Aquaculture Wastewater and Sediment by Microbial Nanospheres with Different Material Ratios and Dosing Methods

Nanospheres were prepared by different materials of nano-bamboo charcoal powder, zeolite powder, and aquaculture pond sediment in different ratios. It was then fermented with effective microorganisms (EM) active calcium liquid to synthesize the bioactive microbial nanospheres. These nanospheres were used to compare the purification effect of ammonium nitrogen (NH4+-N), total nitrogen (TN), and total phosphorus (TP) pollutants in aquaculture wastewater. The indoor simulation experiment was also conducted to compare the different dosage methods (one-time dosing without aeration, multiple dosing without aeration, and multiple dosing with aeration) of microbial nanospheres on the removal of organic matter (OM) and effect of the biodegradability (G value) in aquaculture sediment. The results obtained indicated that the purification effect was most remarkable when the mass ratio of nano-bamboo charcoal powder: zeolite powder: pond sediment was 10%: 15%: 75%, in which the maximum removal rate of NH4+-N, TN, and TP reached up to 84.86%, 52.15%, and 50.35%, respectively. Under the same microbial nanospheres amount, the effect of one-time addition on the removing of OM in sediment was not as effective as that of multiple dosing. After the 20th day, the removal rate of OM reached 25.99% in multiple dosing treatment and it was 35.58% higher than one-time dosing treatment. The OM content in sediment was reduced by 32.38% under the multiple dosing with aeration treatment. Multiple dosing of microbial nanospheres with aeration increased the G value of sediment about 337.0%. In situ experiment further indicated that the microbial nanospheres dosage with aeration had a good sediment bio-remediation effect, which is applicable to solve the problem of endogenous pollution in aquaculture ponds.

Engineered bacterial biofloc formation enhancing phenol removal and cell tolerance

A microbial floc consisting of a community of microbes embedded in extracellular polymeric substances matrix can provide microbial resistances to toxic chemicals and harsh environments. Phenol is a toxic environmental pollutant and a typical lignin-derived phenolic inhibitor. In this study, we genetically engineered Escherichia coli cells by expressions of diguanylate cyclases (DGCs) to promote proteinaceous and aliphatic biofloc formation. Compared with the planktonic E. coli cells, the biofloc-forming cells improved phenol removal rate by up to 2.2-folds, due to their substantially improved tolerance (up to 149%) to phenol and slightly enhanced cellular activity (20%) of phenol hydroxylase (PheH). The engineered bioflocs also improved E. coli tolerance to other toxic compounds such as furfural, 5-hydroxymethylfurfural, and guaiacol. Additionally, the strategy of the engineered biofloc formation was applicable to Pseudomonas putida and enhanced its tolerance to phenol. This study highlights a strategy to form engineered bioflocs for improved cell tolerance and removal of toxic compounds, enabling their universality of use in bioproduction and bioremediation.