Generation of electrical energy in a microbial fuel cell coupling acetate oxidation to Fe3+ reduction and isolation of the involved bacteria

Reduction of Toxic Metal Ions and Production of Bioelectricity through Microbial Fuel Cells Using Bacillus marisflavi as a Biocatalyst

Industrialization has brought many environmental problems since its expansion, including heavy metal contamination in water used for agricultural irrigation. This research uses microbial fuel cell technology to generate bioelectricity and remove arsenic, copper, and iron, using contaminated agricultural water as a substrate and Bacillus marisflavi as a biocatalyst. The results obtained for electrical potential and current were 0.798 V and 3.519 mA, respectively, on the sixth day of operation and the pH value was 6.54 with an EC equal to 198.72 mS/cm, with a removal of 99.08, 56.08, and 91.39% of the concentrations of As, Cu, and Fe, respectively, obtained in 72 h. Likewise, total nitrogen concentrations, organic carbon, loss on ignition, dissolved organic carbon, and chemical oxygen demand were reduced by 69.047, 86.922, 85.378, 88.458, and 90.771%, respectively. At the same time, the PDMAX shown was 376.20 ± 15.478 mW/cm2, with a calculated internal resistance of 42.550 ± 12.353 Ω. This technique presents an essential advance in overcoming existing technical barriers because the engineered microbial fuel cells are accessible and scalable. It will generate important value by naturally reducing toxic metals and electrical energy, producing electric currents in a sustainable and affordable way.

Evidence and Mechanisms of Selenate Reduction to Extracellular Elemental Selenium Nanoparticles on the Biocathode

Intracellular selenium nanoparticles (SeNPs) production is a roadblock to the recovery of selenium from biological water treatment processes because it is energy intensive to break microbial cells and then separate SeNPs. This study provided evidence of significantly more extracellular SeNP production on the biocathode (97-99%) compared to the conventional reactors (1-90%) using transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy. The cathodic microbial community analysis showed that relative abundance of Azospira oryzae, Desulfovibrio, Stenotrophomonas, and Rhodocyclaceae was <1% in the inoculum but enriched to 10-21% for each group when the bioelectrochemical reactor reached a steady state. These four groups of microorganisms simultaneously produce intracellular and extracellular SeNPs in conventional biofilm reactors per literature review but prefer to produce extracellular SeNPs on the cathode. This observation may be explained by the cellular energetics: by producing extracellular SeNPs on the biocathode, microbes do not need to transfer selenate and the electrons from the cathode into the cells, thereby saving energy. Extracellular SeNP production on the biocathode is feasible since we found high concentrations of C-type cytochrome, which is well known for its ability to transfer electrons from electrodes to microbial cells and reduce selenate to SeNPs on the cell membrane.

Iron reducing sludge as a source of electroactive bacteria: assessing iron reduction in biofilm bacteria, planktonic cells and isolates from a microbial fuel cell

In this study, bacteria from a microbial fuel cell (MFC) and isolates were evaluated on their Fe³⁺ reduction capability at different concentrations of iron using acetate as the sole source of carbon. The results demonstrated that the planktonic cells can reach an iron reduction up to 60% at 27 mmol Fe³⁺. Azospira oryzae (µ 0.89 ± 0.27 d^-1) and Cupriavidus metallidurans CH34 (µ 2.34 ± 0.81 d^-1) presented 55 and 62% of Fe³⁺ reduction, respectively, at 16 mmol l^-1. Enterobacter bugandensis (µ 0.4 ± 0.01 d^-1) 40% Fe³⁺ at 27 mmol l^-1, Citrobacter freundii ATCC 8090 (µ 0.23 ± 0.05 d^-1) and Citrobacter murliniae CDC2970-59 (µ 0.34 ± 0.02 d^-1) reduced Fe³⁺ in ~ 50%, at 55 mmol l^-1. This is the first report on these bacteria on a percentage of iron reduction. These results may be useful for anode design to contribute to a higher energy generation in MFCs.

Influence of Fe2+ and Fe3+ on the Performance and Microbial Community Composition of a MFC Inoculated with Sulfate-Reducing Sludge and Acetate as Electron Donor

A sulfidogenic sludge supplemented with acetate was evaluated in the anodic chamber of microbial fuel cells (MFCs) in the presence of sulfate (SO4-2)/Fe3+ and sulfate (SO4-2)/Fe2+ to investigate the MFC performance and the effect of the iron ions on the composition of the microbial community since sulfate and iron ions are frequently present in wastewater derived from several anthropogenic activities. The current densities were up to 0.025 mA/cm2 and 0.017 mA/cm2 for MFCs with Fe2+ and Fe3+, respectively. Accordingly, the redox activity was slightly higher in the presence of Fe2+ than Fe3+. In general, the metabolic activity of the MFC supplemented with Fe2+ was higher than the system with Fe3+ reaching a percentage of sulfate reduction (% SR), sulfide concentration (mg/L HS-), and removal of chemical oxygen demand (% COD removal) of $35.2\pm 0.75$ , $450.3\pm 3.6$ , and $50.05\pm 0.24$ for % SR, HS-, and % COD, respectively, whereas in the MFC with Fe3+, the percentages were of $30.1\pm 1.076$ , $220.6\pm 2.0$ , and $11.78\pm 10.81$ for % SR, HS-, and % COD, respectively. The microbial population determined in each system was also correlated to the metabolic activity. Rhodospirillales, Caulobacterales, and Burkholderiales were the most abundant orders of bacteria in the MFC with Fe3+, whereas with Fe2+, Rhodobacterales, Sphingomonadales, and Rhizobiales. Desulfohalobiaceae and Desulfovibrionaceae were identified in the presence of Fe2+. Unexpected interactions and combinations of microorganisms were observed in a relatively short culturing time, demonstrating the importance of characterizing the anode biofilm prior to shifts in iron ion concentrations on a long-term basis.

Mapping Research on Microbial Fuel Cells in Wastewater Treatment: A Co-Citation Analysis

Microbial fuel cells (MFCs) are promising technologies, aiming at treating different types of industrial and domestic wastewater. In recent years, more and more publications focusing on wastewater treatment have been published. Based on the retrieval of publications from Web of Science Core Collection database, the new emerging trends of microbial fuel cells in wastewater treatment was evaluated with a scientometric analysis method from 1995 to 2020. All publications downloaded from (WOS) were screened by inclusion criteria, and 2233 publications were obtained for further analysis. Document co-citation and burst detection of MFCs in wastewater treatment were analyzed and visualized by software of CiteSpace. Our study indicated that “Environmental Science” is the most popular discipline, while the journal of Bioresource Technology published the greatest quantity of articles in the field of MFCs applied wastewater treatment. China and the Chinese Academy of Science are the most productive country and institution, respectively. “Azo dye” has become the new research topic, which indicates the application area and the development of MFCs. The performance of MFCs for wastewater treatment has been widely discussed. The findings of this study may ameliorate the researcher in seizing the frontier of MFCs in wastewater treatment.